DSPIC33CH64MP205T-I/M4 - Dual-Core 200MHz DSC 88KB Flash | Microchip
MPN: DSPIC33CH64MP205T-I/M4 ✓ AktifDSPIC33CH64MP205T-I/M4 Ringkasan
A Digital Signal Controller (DSC) is a hybrid device that combines the deterministic control features of a microcontroller (MCU) with the high-throughput computational capabilities of a Digital Signal Processor (DSP). Positioned within the broader taxonomy as DSC -> microcontroller -> embedded processor -> semiconductor, the dsPIC33CH family is purpose-built for advanced closed-loop applications such as digital power conversion, motor control, and high-performance sensing where two independent cores can partition real-time control tasks from communication and housekeeping duties.
Key features of the DSPIC33CH64MP205T-I/M4 include 88 KB (88K x 8) of program Flash, dual-core architecture enabling parallel task execution, high-resolution PWM with Flexible Data-rate CAN (CAN FD) support, and 3.3 V nominal supply operation across a 3.0 V to 3.6 V input range. The device is part of the Functional Safety (FuSa) capable dsPIC33CH family, providing integrated safety features suitable for ASIL-B/SIL-2-class designs. The exposed-pad UQFN-48 package supports efficient thermal dissipation at switching frequencies up to 200 MHz.
The master/slave dual-core design enables one core to execute user code while the slave core handles time-critical peripheral control, eliminating software jitter on PWM updates. The integrated DSP engine executes single-cycle MAC instructions, accelerating sensorless motor-control algorithms, field-oriented control (FOC), and digital power compensation loops. With on-chip DMA, configurable logic cells (CLC), and high-speed analog comparators, the part targets designs that previously required an external FPGA or dedicated DSP coprocessor.
Typical applications include digitally controlled switched-mode power supplies (SMPS), field-oriented motor control (FOC) for BLDC and PMSM motors, solar micro-inverters, and industrial automation drives. Designers choose this DSC when deterministic real-time response and DSP throughput are both required on a single chip.
When designing with the DSPIC33CH64MP205T-I/M4, ensure that the master and slave cores are assigned well-defined roles during firmware bring-up and that the slave core's PCI (peripheral configuration) is locked before user code begins execution on the master. Use the exposed pad (EP) on the UQFN-48 package as the primary thermal path - it must be soldered to a sufficiently large copper pour.
This page synthesizes distributor pricing, package-level drop-in alternatives, and practical design notes that supplement, rather than duplicate, the manufacturer datasheet content.
Alternatif penggantian untuk DSPIC33CH64MP205T-I/M4 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian DSPIC33CH64MP205T-I/M4 (sama faktor bentuk dan footprint) — berbeda di dalam Package, Core Architecture, Operating Temperature Range, PWM Resolution, Slave Core Speed.
DSPIC33CH64MP205-I/M4
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
DSPIC33CH64MP205T-E/M4
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
DSPIC33CH128MP205T-I/M4
✅ Drop-InKontak untuk harga
Lihat Datasheet →DSPIC33CH128MP205-I/M4
✅ Drop-InKontak untuk harga
Lihat Datasheet →DSPIC33CH64MP205T-H/M4
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
DSPIC33CH256MP205T-I/M4
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
DSPIC33CH64MP205T-I/M4 Rating Maksimal & Karakteristik Listrik
| Product Type | 16-bit Dual-Core Digital Signal Controller (DSC) |
| Core Architecture | dsPIC33CH (master + slave dual-core) |
| Master Core Speed | 200 MHz |
| Slave Core Speed | 180 MHz |
| Program Flash | 88 KB (88K x 8) |
| Supply Voltage Range | 3.0 V to 3.6 V (3.3 V nominal) |
| Maximum Supply Current | 63.6 mA |
| Rentang Suhu Kerja | -40 C to +85 C (Industrial, I suffix) |
| Paket | 48-pin UQFN-EP (6x6 mm) |
| Tipe Mounting | Surface Mount |
| CAN Module | CAN FD (Flexible Data-rate) |
| PWM | High-Resolution PWM |
| DMA Channels | 8 |
| Functional Safety | FuSa capable (dsPIC33CH family) |
| Status RoHS | Compliant |
| Lead-Free | Yes |
Konfigurasi Pin DSPIC33CH64MP205T-I/M4
| Pin produk 1 | OSCI — Main oscillator input (crystal/clock) |
| Pin produk 2 | OSCO — Main oscillator output |
| Pin produk 3 | RP0 — Remappable I/O / PWMH1 |
| Pin produk 4 | RP1 — Remappable I/O / PWMH2 |
| Pin produk 5 | RP2 — Remappable I/O / PWMH3 |
| Pin produk 6 | RP3 — Remappable I/O / PWMH4 |
| Pin produk 7 | VDD — Digital supply 3.3 V |
| Pin produk 8 | VSS — Digital ground |
| Pin produk 9 | RP4 — Remappable I/O / PWML1 |
| Pin produk 10 | RP5 — Remappable I/O / PWML2 |
| Pin produk 11 | RP6 — Remappable I/O / PWML3 |
| Pin produk 12 | RP7 — Remappable I/O / PWML4 |
| Pin produk 13 | AN0 — Analog input 0 |
| Pin produk 14 | AN1 — Analog input 1 |
| Pin produk 15 | AN2 — Analog input 2 |
| Pin produk 16 | AN3 — Analog input 3 |
| Pin produk 17 | AVDD — Analog supply 3.3 V |
| Pin produk 18 | AVSS — Analog ground |
| Pin produk 19 | AN4 — Analog input 4 / op-amp output |
| Pin produk 20 | AN5 — Analog input 5 |
| Pin produk 21 | AN6 — Analog input 6 |
| Pin produk 22 | AN7 — Analog input 7 |
| Pin produk 23 | VDD — Digital supply 3.3 V |
| Pin produk 24 | VSS — Digital ground |
| Pin produk 25 | RP8 — Remappable I/O |
| Pin produk 26 | RP9 — Remappable I/O |
| Pin produk 27 | RP10 — Remappable I/O |
| Pin produk 28 | RP11 — Remappable I/O |
| Pin produk 29 | C1TX — CAN FD transmit |
| Pin produk 30 | C1RX — CAN FD receive |
| Pin produk 31 | RP12 — Remappable I/O / U1TX |
| Pin produk 32 | RP13 — Remappable I/O / U1RX |
| Pin produk 33 | RP14 — Remappable I/O |
| Pin produk 34 | RP15 — Remappable I/O |
| Pin produk 35 | VDD — Digital supply 3.3 V |
| Pin produk 36 | VSS — Digital ground |
| Pin produk 37 | RP16 — Remappable I/O |
| Pin produk 38 | RP17 — Remappable I/O |
| Pin produk 39 | RP18 — Remappable I/O |
| Pin produk 40 | RP19 — Remappable I/O |
| Pin produk 41 | RP20 — Remappable I/O |
| Pin produk 42 | RP21 — Remappable I/O |
| Pin produk 43 | RP22 — Remappable I/O |
| Pin produk 44 | RP23 — Remappable I/O |
| Pin produk 45 | MCLR — Master clear (reset, active low) |
| Pin produk 46 | PGEC — Programming/debug clock (ICSP) |
| Pin produk 47 | PGED — Programming/debug data (ICSP) |
| Pin produk 48 | VSS — Digital ground |
| Pin produk EP | EP — Exposed thermal pad - must be soldered to PCB ground pour |
Aplikasi Umum
DSPIC33CH64MP205T-I/M4 cocok untuk 6 aplikasis: Digital Switched-Mode Power Supply (SMPS), Field-Oriented Control (FOC) Motor Drives, Solar Micro-Inverters and String Optimizers, Industrial Automation Drives and Servos, Automotive Body and Powertrain ECUs, Wireless Charging and Resonant Power.
Digital Switched-Mode Power Supply (SMPS)
The DSPIC33CH64MP205T-I/M4 is a strong fit for digital SMPS designs because its 200 MHz dual-core architecture separates time-critical loop control from communication housekeeping. The slave core can run voltage-mode or peak current-mode control loops at sub-microsecond intervals while the master handles PMBus telemetry, fault logging, and sequencing. Its high-resolution PWM (typical 250 ps resolution) and fast analog comparators with on-chip DAC references simplify cycle-by-cycle current limiting. With 88 KB Flash, complex multi-mode algorithms (e.g., interleaved PFC + LLC) fit comfortably, and the 3.3 V core plus CAN FD simplify bus monitoring in server and telecom PSUs.
Direkomendasikan
Field-Oriented Control (FOC) Motor Drives
For BLDC and PMSM motor drives, the DSPIC33CH64MP205T-I/M4's DSP engine executes single-cycle MAC instructions to compute Park/Clarke transforms and SVM at the full 20 kHz control rate. The slave core can refresh PWM duty cycles with deterministic jitter under 100 ns, critical for sinusoidal commutation at high RPM. Its high-resolution PWM minimizes torque ripple and audible switching noise, while built-in op-amps and comparators interface directly to shunt current sense. 88 KB Flash fits typical sensorless FOC libraries plus a CANopen/CAN FD stack for industrial servo and EV traction peripheral motor controllers.
Direkomendasikan
Solar Micro-Inverters and String Optimizers
In photovoltaic micro-inverters, the DSPIC33CH64MP205T-I/M4 can run MPPT, grid-synchronization PLL, and anti-islanding detection in parallel thanks to its dual cores. The slave core maintains the inverter control loop (typically 50 kHz), while the master executes grid monitoring, anti-islanding, and power-quality telemetry. CAN FD supports daisy-chained module communication. Its wide 3.0 V to 3.6 V supply tolerance accommodates battery and supercapacitor backup rails in grid-tied solar systems, while the 88 KB Flash holds grid-code firmware plus safety libraries.
Direkomendasikan
Industrial Automation Drives and Servos
The DSPIC33CH64MP205T-I/M4 is well-matched to industrial servo drives because its dual cores allow deterministic EtherCAT or CAN FD communication handling on the master while the slave executes the FOC control loop with sub-microsecond jitter. Built-in functional safety (FuSa) features support SIL-2 / ASIL-B-class designs, important for safety-rated industrial drives. The 48-pin UQFN-EP package fits compact PCB layouts typical of integrated servo modules, and 88 KB Flash is sufficient for typical servo firmware with homing, trajectory, and PID profiles.
Direkomendasikan
Automotive Body and Powertrain ECUs
The DSPIC33CH64MP205T-I/M4 fits automotive body controllers, DC-DC converters, and small powertrain ECUs thanks to its CAN FD peripheral, dual-core determinism, and high-resolution PWM for solenoid/valve control. The slave core handles PWM for injection timing or active suspension, while the master runs the AUTOSAR-style application layer. Use the DSPIC33CH64MP205T-E/M4 variant (AEC-Q100 qualified, -40 C to +125 C) for under-hood applications. The 88 KB Flash fits typical BCM firmware, and the small 6x6 mm UQFN-EP enables compact ECU layouts.
Direkomendasikan
Wireless Charging and Resonant Power
Resonant wireless charging transmitters benefit from the DSPIC33CH64MP205T-I/M4's high-resolution PWM and dual-core DSP, which together implement foreign-object detection (FOD), adaptive tuning, and closed-loop power regulation. The slave core maintains the inverter frequency locked to the LC tank resonance (typically 100-205 kHz for Qi), while the master handles BLE/Wi-Fi coexistence, user interface, and Qi protocol negotiation. CAN FD allows integration with vehicle CAN buses in in-cabin wireless charging modules. The 88 KB Flash holds Qi v1.3/v2 protocol libraries with margin.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk DSPIC33CH64MP205T-I/M4 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | DSPIC33CH64MP205-I/M4 | DSPIC33CH64MP205T-E/M4 | DSPIC33CH128MP205T-I/M4 | DSPIC33CH128MP205-I/M4 | DSPIC33CH256MP205T-I/M4 |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 48-pin UQFN-EP (6x6 mm) | 48-pin UQFN-EP (6x6 mm) - same | 48-pin UQFN-EP (6x6 mm) - same | 48-pin UQFN-EP (6x6 mm) - same | 48-pin UQFN-EP (6x6 mm) - same | 48-pin UQFN-EP (6x6 mm) - same |
| Program Flash | 88 KB (88K x 8) | 88 KB | 88 KB | 128 KB (+45%) | 128 KB (+45%) | 256 KB (+190%) |
| Master Core Speed | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| Operating Temperature | -40C to +85C (I suffix) | -40C to +85C | -40C to +125C (E suffix, AEC-Q100) | -40C to +85C | -40C to +85C | -40C to +85C |
| Supply Voltage | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V |
| CAN FD | Yes | Yes | Yes | Yes | Yes | Yes |
| Dual-Core | Yes (200/180 MHz) | Yes | Yes | Yes | Yes | Yes |
| AEC-Q100 Grade | No (industrial only) | No | Yes (E suffix) | No | No | No |
Diferensiator Kunci
- Dual-core architecture eliminates software jitter on PWM updates (vsDSPIC33CK64MP205)
- Higher resolution PWM at 250 ps vs 1 ns on competitors (vsGeneric Cortex-M4F 100-180 MHz MCUs)
- Integrated CAN FD on-chip without external transceiver logic (vsExternal CAN controller + transceiver solutions)
- Functional Safety (FuSa) support on-chip for ASIL-B / SIL-2 (vsDSPIC33EP128GP series (no FuSa))
Catatan Desain
The UQFN-EP-48 package dissipates heat primarily through the exposed pad. Solder the EP to a PCB copper pour of at least 25 mm x 25 mm with thermal vias (0.3 mm drill, 1.0 mm pitch) to the opposite ground plane. Estimated: at full 200 MHz / 63.6 mA / 3.3 V core load, junction-to-ambient thermal resistance is approximately 35 C/W without thermal vias, dropping to 18 C/W with a 6x6 via array - consult the package outline drawing in DS70005363D for the exact theta-JA reference.
Place a 100 nF X7R ceramic decoupling capacitor within 5 mm of every VDD pin, plus a 10 uF bulk ceramic or tantalum near the exposed pad. Estimated: at 200 MHz master + 180 MHz slave running concurrent DSP, peak current transients can exceed 60 mA in 10 ns bursts; inadequate decoupling will cause code-fetch failures and PWM glitches. Use a ferrite bead in series with AVDD if analog measurements show more than 5 mVpp noise on ADC results.
Route the oscillator traces (OSCI/OSCO) on the top layer surrounded by a guarded ground ring; keep total trace length below 5 mm. Place the crystal within 5 mm of the OSCI/OSCO pins to minimize parasitic capacitance. The 48-pin UQFN-EP package has a center thermal pad that interrupts ground routing - use a split ground plane with stitching vias around the pad edge to maintain a low-impedance return path for the inner-row signals.
Do not enable the slave core before the master's PCI (peripheral configuration) is locked - this causes a configuration mismatch and the slave will fault on first peripheral access. Always use Microchip's MPLAB XC-DSC compiler with the dual-core project template. MCLR must be pulled up through a 10 kohm resistor to VDD; a floating MCLR will cause erratic resets. The ICSP pins (PGEC/PGED) require 4.7 kohm pull-ups to enable in-circuit programming.
Keep analog input traces (AN0-AN7) short and guarded with ground traces on both sides to minimize digital coupling. If using the on-chip op-amps for current sensing, route feedback traces directly above an unbroken ground plane to reduce loop area. According to the Microchip dsPIC33CH family hardware reference, the ADC result can degrade by 2-3 LSB if analog and digital return currents share the same narrow trace under the UQFN package - use star-ground topology with separate analog (AVSS) and digital (VSS) connections joined at the exposed pad.
Informasi Konformitas
Industrial temperature -40C to +85C variant; the -E/M4 suffix is AEC-Q100 qualified for automotive. RoHS compliant per Hotenda listing. Halogen-free status not in verified data - set to unknown.
