Silicon Labs

EFM32TG232F8-D-QFP64R - 32MHz Cortex-M3 MCU | Silicon Labs (Tape & Reel)

MPN: EFM32TG232F8-D-QFP64R ✓ Aktif
1.98 V to 3.8 V Vdss 64-TQFP (10 x 10 mm) Package 32 MHz Speed 8 kB Memory
MOQ: 1 |

EFM32TG232F8-D-QFP64R Ringkasan

Silicon Labs EFM32TG232F8-D-QFP64R is a 32-bit ARM Cortex-M3 microcontroller operating up to 32 MHz, with 8 kB of Flash memory, 2 kB of RAM, and 53 digital I/O pins in a 64-TQFP 10 x 10 mm package. The -D suffix identifies the device configuration within the EFM32 Tiny Gecko family. Its combination of a 32 MHz Cortex-M3 core, energy-saving modes, fast wake-up behavior, and compact 64-pin package makes it suitable for embedded control, sensor monitoring, communications, and low-power consumer equipment.

An ARM Cortex-M3 microcontroller is a 32-bit reduced-instruction-set processor integrated with memory, peripherals, and interrupt-driven control hardware in one semiconductor package. The Cortex-M3 core belongs to the ARM processor hierarchy and is designed for compact embedded systems. Within the broader semiconductor category, the EFM32TG232F8-D-QFP64R is a microcontroller IC, while its platform includes timers, GPIO, communications peripherals, analog functions, and multiple low-power operating modes that support battery-operated and energy-conscious designs.

The device provides 8 kB of Flash for firmware, 2 kB of RAM for working data, and 53 digital I/O pins for external interfaces. Two 16-bit timers support periodic timing, input capture, output compare, and other embedded control functions. Its operating supply range of 1.98 V to 3.8 V allows use from a regulated 3 V rail, while the 32 MHz maximum CPU speed provides sufficient processing capability for protocol handling, state machines, sampling, and supervisory control.

The Tiny Gecko architecture emphasizes energy efficiency rather than only maximum clock speed. Silicon Labs identifies low-energy techniques, fast wake-up times, and energy-saving modes as defining characteristics of the device. These features are relevant in systems that spend most of their operating cycle asleep and must respond promptly to external events. The 53 GPIO count also allows a compact design to connect sensors, indicators, user inputs, communications devices, and actuators without immediately requiring an external GPIO expander.

Typical applications include battery-powered sensor nodes, industrial monitoring terminals, compact access controls, environmental measurement instruments, wearable accessories, and connected embedded products. The 10 x 10 mm TQFP package provides enough I/O and perimeter area for mixed-signal and communication-oriented designs while remaining manageable for cost-controlled manufacturing. Firmware should use the low-power modes when the product specification calls for long standby intervals and minimized average energy consumption.

Designers should verify clock, peripheral, and pin assignments against the manufacturer pinout table before laying out the PCB. Place decoupling capacitors close to the supply pins, route sensitive analog inputs away from fast-switching nodes, and preserve the ground-return path required by each communication interface. The 1.98 V to 3.8 V supply range also means that level-shifting or rail-sequencing decisions must match the voltage tolerance of every attached peripheral.

This product page combines the manufacturer’s core device specifications, package details, application guidance, practical design notes, and qualified same-family replacement analysis. It is intended to help engineers evaluate the EFM32TG232F8-D-QFP64R for embedded designs, identify the limits of drop-in substitution, and move from component selection to a reliable PCB implementation.

Alternatif penggantian untuk EFM32TG232F8-D-QFP64R — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian EFM32TG232F8-D-QFP64R (sama faktor bentuk dan footprint) — berbeda di dalam Flash Memory, Package, Digital I/O Pins, Product Type, RAM.

Silicon Labs
Flash Memory: 16 kB
Package: 64-TQFP (10 mm x 10 mm)
Digital I/O Pins: 53 pins
Bandingkan dengan EFM32TG232F8-D-QFP64R →
Silicon Labs
Flash Memory: 32 kB
Package: 64-pin TQFP, 10 x 10 mm
Digital I/O Pins: 53 pins
Bandingkan dengan EFM32TG232F8-D-QFP64R →
Silicon Labs
Flash Memory: 8 kB (8K x 8)
Digital I/O Pins: 53 pins
Product Type: ARM Cortex-M3 Tiny Gecko Microcontroller
Bandingkan dengan EFM32TG232F8-D-QFP64R →

EFM32TG232F8-QFP64

✅ Drop-In
Silicon Labs
📦 64-TQFP (10 x 10 mm)
ARM Cortex-M3 Tiny Gecko Microcontroller · ARM Cortex-M3 · 32 MHz · 8 kB (8K x 8) · 2 kB · 53 pins · 2 x 16-bit timers · 1.85 V to 3.8 V

Kontak untuk harga

Lihat Datasheet →

EFM32TG232F16-D-QFP64

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 64-TQFP (10 x 10 mm)
Flash increases from 8 kB to 16 kB by 100%; core speed, RAM, package, and GPIO configuration remain family-aligned.

📋 Alternatif referensi (tidak dalam katalog)

EFM32TG232F32-D-QFP64

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 64-TQFP (10 x 10 mm)
Flash increases from 8 kB to 32 kB by 300%; core speed, RAM, package, and GPIO configuration remain family-aligned.

📋 Alternatif referensi (tidak dalam katalog)

EFM32TG232F16-QFP64

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
Silicon Labs
📦 64-TQFP (10 x 10 mm)
32-bit ARM Cortex-M3 microcontroller · EFM32 Tiny Gecko · ARM Cortex-M3 · 32-bit RISC · 32 MHz · 16 kB · 16K x 8 · 4 kB

Kontak untuk harga

Lihat Datasheet →

EFM32TG232F32-QFP64

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
Silicon Labs
📦 64-TQFP (10 x 10 mm)
32-bit ARM Cortex-M3 microcontroller · EFM32 Tiny Gecko · 32 MHz · ARM Cortex-M3 · 32 kB · 4 kB · 53 pins · 2 x 16-bit timers

Kontak untuk harga

Lihat Datasheet →

EFM32TG232F8-D-QFP64R Rating Maksimal & Karakteristik Listrik

Product Type 32-bit ARM Cortex-M3 microcontroller
Product Series EFM32 Tiny Gecko
Maximum CPU Frequency 32 MHz
Flash Memory 8 kB
RAM 2 kB
Digital I/O Pins 53
Timers 2 x 16-bit timers
Supply Voltage Range 1.98 V to 3.8 V
Paket 64-TQFP (10 x 10 mm)
Tipe Mounting Surface mount
Core ARM Cortex-M3
Bit Width 32 bit
Program Memory Architecture 8K x 8 Flash
Low-Power Features Energy-saving modes and fast wake-up

EFM32TG232F8-D-QFP64R 64-tqfp (10 x 10 mm) Diamant Konfigurasi Panduan

Konfigurasi pin untuk EFM32TG232F8-D-QFP64R (64-tqfp (10 x 10 mm) pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.

Diamant diagram pakai pakai 64-tqfp (10 x 10 mm) untuk EFM32TG232F8-D-QFP64R

Tidak ada data diatribut pin yang tersedia untuk EFM32TG232F8-D-QFP64R.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

EFM32TG232F8-D-QFP64R cocok untuk 6 aplikasis: Battery-Powered Sensor Nodes, Industrial Monitoring Terminals, Environmental Measurement Instruments, Compact Access-Control Equipment, Connected IoT Control Products, User-Interface Controller.

🧩

Battery-Powered Sensor Nodes

The EFM32TG232F8-D-QFP64R fits compact sensor nodes that must balance local processing with low standby energy. Its ARM Cortex-M3 core runs up to 32 MHz for sampling, filtering, and communication housekeeping, while Silicon Labs identifies fast wake-up times and energy-saving modes as core platform capabilities. The 53 GPIO pins can connect several sensors, indicators, and control inputs without an external GPIO expander. Use the 8 kB Flash for a tightly organized application, and keep the 2 kB RAM available for short-lived measurement data and protocol buffers.

🏭

Industrial Monitoring Terminals

The EFM32TG232F8-D-QFP64R is suitable for industrial monitoring equipment that combines digital status inputs with local supervision functions. Its 53 digital I/O pins reduce the need for distributed logic when connecting discrete sensors, alarm lines, and digital field devices. Two 16-bit timers support periodic measurement schedules, timing intervals, or input-capture functions, while the Cortex-M3 core can execute a state machine and communication protocol. The 1.98 V to 3.8 V operating range accommodates regulated low-voltage rails, provided every attached interface is checked for logic-level compatibility.

🌐

Environmental Measurement Instruments

The EFM32TG232F8-D-QFP64R can coordinate environmental instruments that combine digital sensors with local display, logging, or communications. The 32 MHz Cortex-M3 core provides enough performance for sampling coordination, calibration logic, and protocol handling, while the two 16-bit timers provide precise timing resources for periodic sampling. Its 64-TQFP package exposes more I/O than a minimal controller without requiring a very large board. Because the device has only 8 kB of Flash and 2 kB of RAM, designers should monitor code growth and avoid buffering large historical datasets internally.

🔒

Compact Access-Control Equipment

The EFM32TG232F8-D-QFP64R fits compact access-control products that require several inputs for buttons, contact sensors, and status signals, along with outputs for indicators or locks. Its 53 GPIO pins provide a broad connection surface, while the two 16-bit timers can manage timing, debouncing intervals, and actuator control. The Cortex-M3 core can maintain an access state machine and communicate with a credential reader over an appropriate peripheral interface. Low-power operation remains important in door-mounted equipment, so the firmware should use the device’s energy-saving modes and minimize activity of unused peripherals.

📱

Connected IoT Control Products

The EFM32TG232F8-D-QFP64R is appropriate for compact IoT control products that need flexible digital connectivity and efficient idle behavior. The 53 GPIO pins can support local inputs, indicators, and communication-module control signals, while the 32 MHz core handles a real-time protocol stack and application state machine. Silicon Labs highlights fast wake-up times and energy-saving modes as useful for products that wait for infrequent network or user events. Interface timing and buffer requirements must be considered carefully because the 2 kB RAM is modest compared with larger general-purpose microcontrollers.

📺

User-Interface Controller

The EFM32TG232F8-D-QFP64R can serve as a dedicated controller for compact user interfaces containing buttons, LEDs, displays, and simple input devices. Its 53 GPIO pins give the design ample parallel connectivity, and the two 16-bit timers can drive periodic display updates, debounce intervals, or indicator timing. The 32 MHz Cortex-M3 core can scan inputs and execute a responsive interface state machine without relying on a separate host processor. A 64-TQFP footprint also leaves room for programming and debug access, but power budgeting and display-driver loading should be evaluated against the available 1.98 V to 3.8 V supply range.

What is the EFM32TG232F8-D-QFP64R?
The EFM32TG232F8-D-QFP64R is a Silicon Labs 32-bit ARM Cortex-M3 microcontroller rated up to 32 MHz, with 8 kB of Flash, 2 kB of RAM, and 53 digital I/O pins in a 64-TQFP package. According to the Silicon Labs product page, its low-power platform includes fast wake-up times and energy-saving modes. It is intended for compact embedded systems requiring moderate processing performance and a relatively high GPIO count.
What are the key specifications of EFM32TG232F8-D-QFP64R?
The key specifications are a 32 MHz ARM Cortex-M3 core, 8 kB of Flash, 2 kB of RAM, 53 digital I/O pins, two 16-bit timers, and a 1.98 V to 3.8 V operating supply range. According to Silicon Labs, the device is packaged in a 64-TQFP measuring 10 x 10 mm. These figures define its processing, memory, timing, I/O, electrical, and package capabilities for embedded-product design.
Where can I download the EFM32TG232F8-D-QFP64R datasheet PDF?
The manufacturer datasheet and product documentation are available from the official Silicon Labs EFM32 Tiny Gecko device page for the EFM32TG232F8-D-QFP64R. The product page provides the authoritative pin descriptions, electrical characteristics, memory map, peripheral details, and package information. Use the manufacturer’s pin-description and pinout tables when assigning the 64-TQFP land pattern rather than relying on a generic package drawing.
Where can I find the EFM32TG232F8-D-QFP64R pinout?
The EFM32TG232F8-D-QFP64R pinout is found in the Silicon Labs device documentation, including the manufacturer’s package and pin-description tables. Use those tables to identify power, ground, reset, debug, clock, GPIO, and peripheral signals for the 64-TQFP footprint. Pin assignments must follow the manufacturer numbering and must be checked against the specific device configuration before PCB routing or firmware port mapping.
What can replace the EFM32TG232F8-D-QFP64R?
The closest supported replacements are same-family EFM32TG232 devices that retain the 64-TQFP footprint and the same Cortex-M3 platform but provide different Flash capacities. The non-D EFM32TG232F8-QFP64 is the closest configuration-level match, while 16 kB and 32 kB Flash versions can fit some designs after confirming firmware and peripheral requirements. No cross-brand drop-in replacement is established here; verify every pin, voltage, and firmware assumption before substitution.
Is EFM32TG232F8-D-QFP64R suitable for low-power sensor applications?
Yes, the EFM32TG232F8-D-QFP64R is suitable for low-power sensor applications because Silicon Labs highlights its energy-saving modes and fast wake-up times. Its 53 GPIO pins can support multiple sensors, indicators, and control signals, while the 32 MHz Cortex-M3 core can perform local filtering and protocol processing. Duty-cycle the peripheral rails and use the device’s low-energy modes to improve battery life.
Where to buy EFM32TG232F8-D-QFP64R online?
Use the Request a Quote form on this page to request EFM32TG232F8-D-QFP64R availability, current unit cost, minimum order quantity, and delivery scheduling. The form allows engineers to identify the required package, quantity, and destination before purchasing. The exact silicon configuration, 64-TQFP package, and -D suffix should be stated clearly in the request to avoid substitution errors.
What is the price of EFM32TG232F8-D-QFP64R?
Current pricing for the EFM32TG232F8-D-QFP64R is handled through the Request a Quote form on this page. Submit the required quantity and package information so the offer reflects the exact MPN rather than a related device with different Flash capacity, temperature grade, or packing code. This avoids comparisons with generic EFM32TG232 pricing that does not represent the specified -D-QFP64 configuration.
What is the lead time for EFM32TG232F8-D-QFP64R?
The current lead time should be requested through the Request a Quote form on this page. Include your required quantity, production schedule, and approved alternate-part policy if applicable. Because the EFM32TG232F8-D-QFP64R includes specific configuration and package information, a lead-time confirmation against the exact MPN is preferable to relying on a family-level availability statement.
Is EFM32TG232F8-D-QFP64R in stock?
Current stock for the exact EFM32TG232F8-D-QFP64R is handled through the Request a Quote form on this page. Provide the required quantity and intended delivery window in the request. Avoid treating a related EFM32TG232F8-QFP64 listing as proof of stock for the -D configuration, because the device suffix and packing details should be confirmed as part of the order.
EFM32TG232F8-D-QFP64R vs EFM32TG232F8-QFP64 — which is better?
The EFM32TG232F8-D-QFP64R and EFM32TG232F8-QFP64 share the core EFM32TG232F8 identity, 32 MHz Cortex-M3 core, 8 kB Flash, 2 kB RAM, 53 GPIO pins, and 64-TQFP package. Their distinguishing ordering suffix identifies different device configurations or orderable variants. Choose the -D-QFP64 when that is the specified assembly, and review the manufacturer ordering information for the non-D version before treating it as a drop-in replacement.
What is the difference between EFM32TG232F8-D-QFP64R and higher-Flash EFM32TG232 devices?
The primary documented difference is Flash capacity: the EFM32TG232F8-D-QFP64R has 8 kB, while F16 and F32 family variants provide 16 kB and 32 kB respectively when ordered in the same 64-TQFP configuration. The extra memory can simplify firmware organization or add application features. A replacement remains conditional on matching package pins, supply requirements, peripheral configuration, and qualification for the intended application.
When should I choose EFM32TG232F8-D-QFP64R over a higher-memory EFM32TG232?
Choose the EFM32TG232F8-D-QFP64R when the application fits within 8 kB of Flash, requires 2 kB of RAM, and benefits from 53 GPIO pins in a 64-TQFP package. Select a 16 kB or 32 kB family variant when firmware growth, local data processing, or update overhead would exceed the 8 kB budget. Validate memory use early because code size can change significantly with drivers and protocol stacks.
What is the best Silicon Labs equivalent for EFM32TG232F8-D-QFP64R?
The best-supported Silicon Labs equivalent is the same-family EFM32TG232F8-QFP64 with the same 64-TQFP footprint, provided its ordering configuration satisfies the design requirements. Higher-Flash EFM32TG232 variants add memory while retaining the family’s core and package direction. No competitor MCU should be called a drop-in replacement without a documented pin-by-pin and peripheral-level comparison.
Can a non-Silicon Labs MCU replace EFM32TG232F8-D-QFP64R without a PCB redesign?
A cross-brand MCU should not be assumed to replace the EFM32TG232F8-D-QFP64R without a PCB redesign. A genuine drop-in candidate would need the same 64-TQFP footprint, pin-to-pin compatible signal assignments, compatible 1.98 V to 3.8 V operation, equivalent peripheral functions, and compatible startup and debug behavior. No cross-brand drop-in part is established by the available cross-reference information, so a redesign-level comparison is required instead.

Data referensi engineering untuk EFM32TG232F8-D-QFP64R — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the EFM32TG232F8-D-QFP64R when an embedded design needs a 32 MHz ARM Cortex-M3 core, 8 kB of Flash, 2 kB of RAM, and 53 GPIO pins within a 10 x 10 mm 64-TQFP package. It is particularly attractive for low-power products that benefit from fast wake-up behavior and energy-saving modes. Select EFM32TG232F16-D-QFP64 or EFM32TG232F32-D-QFP64 when firmware growth is a concern and the added Flash materially simplifies the software architecture. The non-D EFM32TG232F8-QFP64 is the closest same-memory option, but its ordering configuration must be checked before replacement. Do not select a cross-brand MCU as a drop-in part without a documented pin-by-pin, electrical, peripheral, and firmware review.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini EFM32TG232F8-QFP64 EFM32TG232F16-D-QFP64 EFM32TG232F32-D-QFP64 EFM32TG232F16-QFP64 EFM32TG232F32-QFP64
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Package 64-TQFP (10 x 10 mm) 64-TQFP (10 x 10 mm) 64-TQFP (10 x 10 mm) 64-TQFP (10 x 10 mm) 64-TQFP (10 x 10 mm) 64-TQFP (10 x 10 mm)
Processor Core ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3
Maximum CPU Frequency 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz
Flash Memory 8 kB 8 kB 16 kB 32 kB 16 kB 32 kB
RAM 2 kB 2 kB 2 kB 2 kB 2 kB 2 kB
Digital I/O Pins 53 53 53 53 53 53
Supply Voltage Range 1.98 V to 3.8 V 1.98 V to 3.8 V 1.98 V to 3.8 V 1.98 V to 3.8 V 1.98 V to 3.8 V 1.98 V to 3.8 V
Timers 2 x 16-bit timers 2 x 16-bit timers 2 x 16-bit timers 2 x 16-bit timers 2 x 16-bit timers 2 x 16-bit timers

Diferensiator Kunci

  • Higher GPIO density than a minimal Cortex-M3 controller (vsEFM32TG232F16-D-QFP64)
  • Minimum Flash configuration in the compared EFM32TG232 family (vsEFM32TG232F32-D-QFP64)
  • Compact 53-GPIO package without moving to a larger pin count (vsEFM32TG232F16-QFP64)

Catatan Desain

Design the supply rail for the EFM32TG232F8-D-QFP64R across its 1.98 V to 3.8 V operating range, including startup transients and peripheral loading. Place the required bypass capacitors at the device supply pins using the manufacturer’s recommended values and layout. Account for voltage-drop effects in compact boards, and confirm that attached I/O devices are not driven above the MCU’s pin limits when the core rail is below the nominal 3.3 V level.

Reserve programming and debug access before placing the 64-TQFP device. Keep sensitive analog or communication routes away from clock and switching nodes, and provide a continuous ground reference beneath the footprint where the layout rules allow. The 53 GPIO assignments should be checked against the manufacturer pin-description table so that no boot-sensitive or supply function is inadvertently assigned to an external signal.

Treat the 8 kB Flash and 2 kB RAM limits as architectural constraints rather than incidental specification values. Estimate the linked firmware size with the exact compiler version and optimization settings, leave memory headroom for interrupts and future updates, and avoid large buffered datasets in RAM. Higher-Flash EFM32TG232 family parts can simplify growth, but their use still requires matching the exact pin configuration and qualification requirements.

Use the low-energy operating modes as part of the product-level power budget, not merely as firmware options. Disable unused peripherals and GPIO inputs, control external sensor and communication-module rails, and ensure the system wakes reliably from each required event source. The Cortex-M3 core’s ability to run up to 32 MHz is valuable during processing intervals, but average energy is typically dominated by time spent awake and by leakage from powered external circuits.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

No explicit environmental or automotive compliance statements were identified for this exact MPN. Confirm the orderable part's declarations with Silicon Labs before qualification.

Pencarian Terkait

EFM32TG232F8-D-QFP64R EFM32TG232F8-D-QFP64R datasheet EFM32TG232F8-D-QFP64R datasheet pdf EFM32TG232F8-D-QFP64R pinout EFM32TG232F8-D-QFP64R schematic EFM32TG232F8-D-QFP64R equivalent EFM32TG232F8-D-QFP64R replacement EFM32TG232F8-D-QFP64R cross reference EFM32TG232F8-D-QFP64R vs EFM32TG232F8-QFP64 EFM32TG232F8-D-QFP64R footprint EFM32TG232F8-D-QFP64R price Silicon Labs EFM32TG232F8-D-QFP64R EFM32TG232F8-D-QFP64R application circuit EFM32TG232 64-TQFP pinout

Komponen dan Istilah Terkait

Silicon Labs EFM32TG232F8-D-QFP64R EFM32TG232F8-QFP64 EFM32TG232F16-D-QFP64 EFM32TG232F32-D-QFP64 EFM32TG232F16-QFP64 EFM32TG232F32-QFP64 EFM32 Tiny Gecko EFM32ZG110F4-B-QFN24 ARM Cortex-M3 ARM Cortex-M3 microcontroller 32-bit microcontroller microcontroller IC embedded system low-power platform energy-saving modes fast wake-up time Flash memory RAM general-purpose I/O 16-bit timer 64-TQFP 10 x 10 mm surface-mount package industrial sensor monitoring IoT control
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ