EFM32TG232F8-D-QFP64R - 32MHz Cortex-M3 MCU | Silicon Labs (Tape & Reel)
MPN: EFM32TG232F8-D-QFP64R ✓ Hoạt độngEFM32TG232F8-D-QFP64R Tóm tắt
An ARM Cortex-M3 microcontroller is a 32-bit reduced-instruction-set processor integrated with memory, peripherals, and interrupt-driven control hardware in one semiconductor package. The Cortex-M3 core belongs to the ARM processor hierarchy and is designed for compact embedded systems. Within the broader semiconductor category, the EFM32TG232F8-D-QFP64R is a microcontroller IC, while its platform includes timers, GPIO, communications peripherals, analog functions, and multiple low-power operating modes that support battery-operated and energy-conscious designs.
The device provides 8 kB of Flash for firmware, 2 kB of RAM for working data, and 53 digital I/O pins for external interfaces. Two 16-bit timers support periodic timing, input capture, output compare, and other embedded control functions. Its operating supply range of 1.98 V to 3.8 V allows use from a regulated 3 V rail, while the 32 MHz maximum CPU speed provides sufficient processing capability for protocol handling, state machines, sampling, and supervisory control.
The Tiny Gecko architecture emphasizes energy efficiency rather than only maximum clock speed. Silicon Labs identifies low-energy techniques, fast wake-up times, and energy-saving modes as defining characteristics of the device. These features are relevant in systems that spend most of their operating cycle asleep and must respond promptly to external events. The 53 GPIO count also allows a compact design to connect sensors, indicators, user inputs, communications devices, and actuators without immediately requiring an external GPIO expander.
Typical applications include battery-powered sensor nodes, industrial monitoring terminals, compact access controls, environmental measurement instruments, wearable accessories, and connected embedded products. The 10 x 10 mm TQFP package provides enough I/O and perimeter area for mixed-signal and communication-oriented designs while remaining manageable for cost-controlled manufacturing. Firmware should use the low-power modes when the product specification calls for long standby intervals and minimized average energy consumption.
Designers should verify clock, peripheral, and pin assignments against the manufacturer pinout table before laying out the PCB. Place decoupling capacitors close to the supply pins, route sensitive analog inputs away from fast-switching nodes, and preserve the ground-return path required by each communication interface. The 1.98 V to 3.8 V supply range also means that level-shifting or rail-sequencing decisions must match the voltage tolerance of every attached peripheral.
This product page combines the manufacturer’s core device specifications, package details, application guidance, practical design notes, and qualified same-family replacement analysis. It is intended to help engineers evaluate the EFM32TG232F8-D-QFP64R for embedded designs, identify the limits of drop-in substitution, and move from component selection to a reliable PCB implementation.
Bộ thay thế dễ dàng lắp đặt cho EFM32TG232F8-D-QFP64R — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với EFM32TG232F8-D-QFP64R (cùng hình factor và footprint) — khác nhau ở Flash Memory, Package, Digital I/O Pins, Product Type, RAM.
EFM32TG232F8-QFP64
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EFM32TG232F16-D-QFP64
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
EFM32TG232F32-D-QFP64
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
EFM32TG232F16-QFP64
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →EFM32TG232F32-QFP64
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →EFM32TG232F8-D-QFP64R Tỷ lệ tối đa & tính chất điện
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Product Series | EFM32 Tiny Gecko |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 8 kB |
| RAM | 2 kB |
| Digital I/O Pins | 53 |
| Timers | 2 x 16-bit timers |
| Supply Voltage Range | 1.98 V to 3.8 V |
| Hộp | 64-TQFP (10 x 10 mm) |
| Kiểu lắp đặt | Surface mount |
| Core | ARM Cortex-M3 |
| Bit Width | 32 bit |
| Program Memory Architecture | 8K x 8 Flash |
| Low-Power Features | Energy-saving modes and fast wake-up |
Hướng dẫn cấu hình chân EFM32TG232F8-D-QFP64R 64-tqfp (10 x 10 mm)
Cấu hình chân cho EFM32TG232F8-D-QFP64R (64-tqfp (10 x 10 mm) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho EFM32TG232F8-D-QFP64R.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
EFM32TG232F8-D-QFP64R phù hợp cho 6 Áp dụngs: Battery-Powered Sensor Nodes, Industrial Monitoring Terminals, Environmental Measurement Instruments, Compact Access-Control Equipment, Connected IoT Control Products, User-Interface Controller.
Battery-Powered Sensor Nodes
The EFM32TG232F8-D-QFP64R fits compact sensor nodes that must balance local processing with low standby energy. Its ARM Cortex-M3 core runs up to 32 MHz for sampling, filtering, and communication housekeeping, while Silicon Labs identifies fast wake-up times and energy-saving modes as core platform capabilities. The 53 GPIO pins can connect several sensors, indicators, and control inputs without an external GPIO expander. Use the 8 kB Flash for a tightly organized application, and keep the 2 kB RAM available for short-lived measurement data and protocol buffers.
Được đề xuất
Industrial Monitoring Terminals
The EFM32TG232F8-D-QFP64R is suitable for industrial monitoring equipment that combines digital status inputs with local supervision functions. Its 53 digital I/O pins reduce the need for distributed logic when connecting discrete sensors, alarm lines, and digital field devices. Two 16-bit timers support periodic measurement schedules, timing intervals, or input-capture functions, while the Cortex-M3 core can execute a state machine and communication protocol. The 1.98 V to 3.8 V operating range accommodates regulated low-voltage rails, provided every attached interface is checked for logic-level compatibility.
Được đề xuất
Environmental Measurement Instruments
The EFM32TG232F8-D-QFP64R can coordinate environmental instruments that combine digital sensors with local display, logging, or communications. The 32 MHz Cortex-M3 core provides enough performance for sampling coordination, calibration logic, and protocol handling, while the two 16-bit timers provide precise timing resources for periodic sampling. Its 64-TQFP package exposes more I/O than a minimal controller without requiring a very large board. Because the device has only 8 kB of Flash and 2 kB of RAM, designers should monitor code growth and avoid buffering large historical datasets internally.
Được đề xuất
Compact Access-Control Equipment
The EFM32TG232F8-D-QFP64R fits compact access-control products that require several inputs for buttons, contact sensors, and status signals, along with outputs for indicators or locks. Its 53 GPIO pins provide a broad connection surface, while the two 16-bit timers can manage timing, debouncing intervals, and actuator control. The Cortex-M3 core can maintain an access state machine and communicate with a credential reader over an appropriate peripheral interface. Low-power operation remains important in door-mounted equipment, so the firmware should use the device’s energy-saving modes and minimize activity of unused peripherals.
Được đề xuất
Connected IoT Control Products
The EFM32TG232F8-D-QFP64R is appropriate for compact IoT control products that need flexible digital connectivity and efficient idle behavior. The 53 GPIO pins can support local inputs, indicators, and communication-module control signals, while the 32 MHz core handles a real-time protocol stack and application state machine. Silicon Labs highlights fast wake-up times and energy-saving modes as useful for products that wait for infrequent network or user events. Interface timing and buffer requirements must be considered carefully because the 2 kB RAM is modest compared with larger general-purpose microcontrollers.
Được đề xuất
User-Interface Controller
The EFM32TG232F8-D-QFP64R can serve as a dedicated controller for compact user interfaces containing buttons, LEDs, displays, and simple input devices. Its 53 GPIO pins give the design ample parallel connectivity, and the two 16-bit timers can drive periodic display updates, debounce intervals, or indicator timing. The 32 MHz Cortex-M3 core can scan inputs and execute a responsive interface state machine without relying on a separate host processor. A 64-TQFP footprint also leaves room for programming and debug access, but power budgeting and display-driver loading should be evaluated against the available 1.98 V to 3.8 V supply range.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho EFM32TG232F8-D-QFP64R — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | EFM32TG232F8-QFP64 | EFM32TG232F16-D-QFP64 | EFM32TG232F32-D-QFP64 | EFM32TG232F16-QFP64 | EFM32TG232F32-QFP64 |
|---|---|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 64-TQFP (10 x 10 mm) | 64-TQFP (10 x 10 mm) | 64-TQFP (10 x 10 mm) | 64-TQFP (10 x 10 mm) | 64-TQFP (10 x 10 mm) | 64-TQFP (10 x 10 mm) |
| Processor Core | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 8 kB | 8 kB | 16 kB | 32 kB | 16 kB | 32 kB |
| RAM | 2 kB | 2 kB | 2 kB | 2 kB | 2 kB | 2 kB |
| Digital I/O Pins | 53 | 53 | 53 | 53 | 53 | 53 |
| Supply Voltage Range | 1.98 V to 3.8 V | 1.98 V to 3.8 V | 1.98 V to 3.8 V | 1.98 V to 3.8 V | 1.98 V to 3.8 V | 1.98 V to 3.8 V |
| Timers | 2 x 16-bit timers | 2 x 16-bit timers | 2 x 16-bit timers | 2 x 16-bit timers | 2 x 16-bit timers | 2 x 16-bit timers |
Bảo phân biệt quan trọng
- Higher GPIO density than a minimal Cortex-M3 controller (vsEFM32TG232F16-D-QFP64)
- Minimum Flash configuration in the compared EFM32TG232 family (vsEFM32TG232F32-D-QFP64)
- Compact 53-GPIO package without moving to a larger pin count (vsEFM32TG232F16-QFP64)
Ghi chú thiết kế
Design the supply rail for the EFM32TG232F8-D-QFP64R across its 1.98 V to 3.8 V operating range, including startup transients and peripheral loading. Place the required bypass capacitors at the device supply pins using the manufacturer’s recommended values and layout. Account for voltage-drop effects in compact boards, and confirm that attached I/O devices are not driven above the MCU’s pin limits when the core rail is below the nominal 3.3 V level.
Reserve programming and debug access before placing the 64-TQFP device. Keep sensitive analog or communication routes away from clock and switching nodes, and provide a continuous ground reference beneath the footprint where the layout rules allow. The 53 GPIO assignments should be checked against the manufacturer pin-description table so that no boot-sensitive or supply function is inadvertently assigned to an external signal.
Treat the 8 kB Flash and 2 kB RAM limits as architectural constraints rather than incidental specification values. Estimate the linked firmware size with the exact compiler version and optimization settings, leave memory headroom for interrupts and future updates, and avoid large buffered datasets in RAM. Higher-Flash EFM32TG232 family parts can simplify growth, but their use still requires matching the exact pin configuration and qualification requirements.
Use the low-energy operating modes as part of the product-level power budget, not merely as firmware options. Disable unused peripherals and GPIO inputs, control external sensor and communication-module rails, and ensure the system wakes reliably from each required event source. The Cortex-M3 core’s ability to run up to 32 MHz is valuable during processing intervals, but average energy is typically dominated by time spent awake and by leakage from powered external circuits.
Thông tin tuân thủ
No explicit environmental or automotive compliance statements were identified for this exact MPN. Confirm the orderable part's declarations with Silicon Labs before qualification.