Silicon Labs

EFM32TG840F32-QFN64T - 32MHz Cortex-M3 | Silicon Labs

MPN: EFM32TG840F32-QFN64T ✓ Aktif
2.5 V or 3.3 V Vdss 64-QFN (9 mm × 9 mm) Package 32 MHz Speed 32 KB (32K × 8) Memory
MOQ: 1 |

EFM32TG840F32-QFN64T Ringkasan

The Silicon Labs EFM32TG840F32-QFN64T is an ARM Cortex-M3 microcontroller operating up to 32 MHz, with 32 KB of Flash memory, 4 KB of RAM, 56 digital I/O pins, and a 64-QFN 9 mm × 9 mm package. The device also integrates an 8 × 20 LCD controller, AES hardware, and three operational amplifiers for compact energy-conscious embedded systems.

A microcontroller is a programmable system-on-chip containing a processor core, memory, peripherals, and interfaces on one die. In the embedded-device hierarchy, the EFM32TG840 belongs to the 32-bit MCU and ARM Cortex-M3 product families, with the Cortex-M core supporting efficient control processing while the integrated peripherals reduce component count and board area.

The EFM32TG840F32-QFN64T combines a maximum 32 MHz processor speed with 32 KB Flash and 4 KB RAM. Its 56 digital I/O pins provide access to mixed analog and digital functions, while two 16-bit timers support periodic timing, input capture, and output compare tasks. The integrated AES accelerator supports hardware-assisted encrypted communication, and the three operational amplifiers can handle low-level signal conditioning without separate amplifier packages.

Silicon Labs implements this controller on its energy-conscious EFM32 platform, which combines low-power operating techniques with fast wake-up behavior. The MCU is positioned for systems that need deterministic control and compact integration but do not require the larger memory resources or peripheral set of a high-end application processor. Its operating voltage is identified as 2.5 V or 3.3 V in the device comparison material.

Typical uses include industrial sensor nodes, compact energy meters, building controls, portable measurement equipment, connected instruments, and LCD-driven user interfaces. The LCD controller permits direct segment display support, while the integrated analog amplifiers are useful for low-frequency sensor conditioning and current-feedback signal paths. The 56 I/O pins also allow peripheral sharing without immediately exhausting package I/O resources.

PCB design should preserve short analog and digital return paths, place decoupling capacitors close to the supply pins, and follow the manufacturer land pattern for the 64-QFN footprint. Confirm the exact exposed-pad connection, pin assignments, decoupling network, and programming configuration against the official device documentation before manufacturing a new board.

This page combines the manufacturer device specifications with practical application guidance, drop-in family comparisons, interface considerations, and sourcing information. It is designed to help engineers evaluate the EFM32TG840F32-QFN64T for low-power embedded control without overlooking memory capacity, analog integration, package constraints, or firmware-family compatibility.

Alternatif penggantian untuk EFM32TG840F32-QFN64T — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian EFM32TG840F32-QFN64T (sama faktor bentuk dan footprint) — berbeda di dalam Flash Memory, Package, Architecture, Low-Power Features, Product Type.

Silicon Labs
Flash Memory: 32 kB
Package: 64-QFN (9 x 9 mm) with exposed pad
Architecture: 32-bit RISC
Bandingkan dengan EFM32TG840F32-QFN64T →
Silicon Labs
Flash Memory: 16 kB (16K x 8)
Package: 64-QFN (9x9 mm)
Architecture: 32-bit ARM
Bandingkan dengan EFM32TG840F32-QFN64T →
Silicon Labs
Flash Memory: 32 KB (32K x 8)
Package: 64-QFN (9 x 9 mm)
Architecture: 32-bit
Bandingkan dengan EFM32TG840F32-QFN64T →
Silicon Labs
Flash Memory: 8 KB (8K x 8)
Package: 64-QFN (9x9 mm)
Bandingkan dengan EFM32TG840F32-QFN64T →

EFM32TG840F32-QFN64

✅ Drop-In
Silicon Labs
📦 QFN-64 (9 mm × 9 mm)
ARM Cortex-M3 Tiny Gecko Microcontroller · ARM Cortex-M3 · 32-bit · 32 MHz · 32 KB (32K x 8) · 4 KB · 56 · 2 x 16-bit timers

Kontak untuk harga

Lihat Datasheet →

EFM32TG840F64-QFN64T

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 QFN-64 (9 mm × 9 mm)
Same 32 MHz Cortex-M3 performance and 64-QFN footprint; Flash increases from 32 KB to 64 KB, a 32 KB or 100% increase, while processor speed and RAM remain unchanged.

📋 Alternatif referensi (tidak dalam katalog)

EFM32TG840F128-QFN64T

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 QFN-64 (9 mm × 9 mm)
Same 32 MHz Cortex-M3 performance and 64-QFN footprint; Flash increases from 32 KB to 128 KB, a 96 KB or 300% increase, without increasing processor speed.

📋 Alternatif referensi (tidak dalam katalog)

EFM32TG840F16-QFN64T

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
Silicon Labs
📦 QFN-64 (9 mm × 9 mm)
32-bit ARM Cortex-M3 microcontroller · EFM32 Tiny Gecko · 32 MHz · 16 KB (16K x 8) · 4 KB (4K x 8) · 56 pins · 2 x 16-bit timers · 3

Kontak untuk harga

Lihat Datasheet →

EFM32TG840F16-QFN64

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
Silicon Labs
📦 QFN-64 (9 mm × 9 mm)
ARM Cortex-M3 32-bit microcontroller (MCU) · EFM32 Tiny Gecko · ARM Cortex-M3 · 32 MHz · 16 kB (16K x 8) · 4 kB (4K x 8) · 56 pins · 2 x 16-bit timers

Kontak untuk harga

Lihat Datasheet →

EFM32TG840F32-QFN64T Rating Maksimal & Karakteristik Listrik

Product Type 32-bit ARM Cortex-M3 microcontroller
Maximum CPU Frequency 32 MHz
Flash Memory 32 KB (32K × 8)
RAM 4 KB
Digital I/O Pins 56 pins
Timer Count 2 × 16-bit timers
LCD Controller 8 × 20 segments
Crypto Accelerator AES hardware accelerator
Integrated Operational Amplifiers 3 operational amplifiers
Processor Core ARM Cortex-M3
Architecture 32-bit single-core RISC
Operating Supply 2.5 V or 3.3 V
Paket 64-QFN (9 mm × 9 mm)
Tipe Mounting Surface mount
Low-Power Features Energy-saving modes and fast wake-up

EFM32TG840F32-QFN64T 64-qfn (9 mm × 9 mm) Diamant Konfigurasi Panduan

Konfigurasi pin untuk EFM32TG840F32-QFN64T (64-qfn (9 mm × 9 mm) pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.

Diamant diagram pakai pakai 64-qfn (9 mm × 9 mm) untuk EFM32TG840F32-QFN64T

Tidak ada data diatribut pin yang tersedia untuk EFM32TG840F32-QFN64T.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

EFM32TG840F32-QFN64T cocok untuk 6 aplikasis: Industrial Sensor Node, Smart Energy Meter, Connected Building Control, Portable Measurement Instrument, Encrypted Communication Endpoint, Compact User Interface Controller.

🏭

Industrial Sensor Node

The EFM32TG840F32-QFN64T fits compact industrial sensor nodes that combine acquisition, local processing, and secure communication. Its 32 MHz ARM Cortex-M3 core provides responsive control, while 32 KB Flash accommodates a focused firmware image and 4 KB RAM supports short measurement buffers. Three integrated operational amplifiers can condition sensor signals without adding separate amplifier packages, and the AES accelerator supports hardware-assisted protection of transmitted data. The 56 I/O pins leave room for sensors, digital inputs, status indicators, and communications. Energy-saving modes and fast wake-up are particularly useful when the node samples periodically rather than operating continuously.

⚡

Smart Energy Meter

The EFM32TG840F32-QFN64T is appropriate for compact metering equipment that must calculate measurements, drive a display, and communicate through a low-power serial interface. Its two 16-bit timers support accurate timebase or pulse-counting functions, while the integrated 8 × 20 LCD controller can drive segmented meter displays directly. The three operational amplifiers are useful for conditioning low-level current or voltage signals before conversion. With 32 KB Flash and 4 KB RAM, the device favors a focused meter application rather than a large historical data store. Fast wake-up can reduce perceived update latency while the controller remains in an energy-saving mode between measurement events.

🧩

Connected Building Control

The EFM32TG840F32-QFN64T works well in distributed building-control endpoints that monitor inputs and operate relays or actuators over a low-speed network. The 56 GPIO pins can support digital sensors, addressable interfaces, and status controls, while the 32 MHz Cortex-M3 core can run protocol and control tasks concurrently through its interrupt-driven peripheral architecture. AES hardware adds value in connected equipment where encrypted links are required. The device’s low-power modes make it suitable for rooms or zones that are sparsely occupied, provided the wake source and periodic sensing strategy are designed carefully. Firmware should use the manufacturer’s low-power guidance to avoid accidental peripheral activity during sleep.

🔧

Portable Measurement Instrument

The EFM32TG840F32-QFN64T is suited to handheld measurement instruments where low power, analog integration, and local display support matter. The three operational amplifiers can implement buffering or gain stages close to the sensor, reducing external analog hardware and improving board utilization. Its 8 × 20 LCD controller simplifies segmented status and measurement displays, while AES hardware can protect stored configuration or connected data. A 32 MHz Cortex-M3 core handles timing, signal control, and user-interface updates, and the 4 KB RAM supports compact working sets. For battery operation, the firmware should shut down unused analog blocks and peripheral clocks and verify the real sleep current with the complete analog front end attached.

🌐

Encrypted Communication Endpoint

The EFM32TG840F32-QFN64T can serve as an encrypted communication endpoint in compact security-sensitive control equipment. Its hardware AES accelerator offloads cryptographic processing from the 32 MHz Cortex-M3 core, leaving more processing capacity for protocol handling and application tasks. Serial interface controllers can connect the MCU to transceivers or sensors, and the 56 GPIO pins provide control and status lines without immediate package-routing pressure. Fast wake-up allows the endpoint to respond promptly while remaining in an energy-saving state between exchanges. Security validation must still cover key storage, protocol implementation, certificate handling, physical tamper resistance, and firmware-update procedures; the AES block alone does not secure the complete product.

📺

Compact User Interface Controller

The EFM32TG840F32-QFN64T is useful as the central controller in a compact keypad, menu, or segmented-display interface. The integrated 8 × 20 LCD controller reduces the need for a separate display controller, while 56 GPIO pins can support matrix keys, indicators, rotary encoders, and navigation controls. The 32 MHz Cortex-M3 core provides enough responsiveness for debouncing, menu state, and communications without a separate display processor. Its three operational amplifiers are useful when the same board also handles analog sensing or gain adjustment. Because the LCD and key requirements determine pin multiplexing, finalize the display and control assignments against the official pin table before schematic routing and consider adding a simple GPIO expander when spare pins are limited.

What is the EFM32TG840F32-QFN64T?
The EFM32TG840F32-QFN64T is a Silicon Labs 32-bit ARM Cortex-M3 microcontroller rated up to 32 MHz. It combines 32 KB Flash, 4 KB RAM, 56 digital I/O pins, two 16-bit timers, an 8 × 20 LCD controller, AES hardware, and three operational amplifiers in a 64-QFN package. According to the Silicon Labs device page, its low-power platform is intended for energy-sensitive embedded applications.
What are the key specifications of EFM32TG840F32-QFN64T that engineers should know?
The principal EFM32TG840F32-QFN64T specifications are a 32 MHz ARM Cortex-M3 core, 32 KB Flash, 4 KB RAM, 56 digital I/O pins, two 16-bit timers, and a 64-QFN package measuring 9 mm × 9 mm. Silicon Labs also identifies an 8 × 20 LCD controller, an AES accelerator, three operational amplifiers, 2.5 V or 3.3 V operation, energy-saving modes, and fast wake-up behavior. These figures define its suitability for compact low-power control systems.
Where can I download the EFM32TG840F32-QFN64T datasheet PDF?
The official EFM32TG840F32-QFN64T documentation is accessible through the Silicon Labs Tiny Gecko device page at the datasheet URL listed on this page. The manufacturer page contains the authoritative specifications, electrical limits, package drawing, and ordering information. Use that documentation for production design decisions rather than relying on distributor summaries, and confirm the temperature grade associated with the exact EFM32TG840F32-QFN64T suffix.
Where can I find the EFM32TG840F32-QFN64T pinout?
The EFM32TG840F32-QFN64T pinout is defined by the official 64-QFN package drawing and pin-description tables in the Silicon Labs device documentation. The component uses a 64-QFN package measuring 9 mm × 9 mm, so its land pattern and exposed-pad arrangement must match the manufacturer drawing exactly. Use the pin-description table when assigning tracks, programming functions, analog inputs, LCD outputs, and supply connections.
How much Flash and RAM does the EFM32TG840F32-QFN64T have?
The EFM32TG840F32-QFN64T provides 32 KB of Flash memory and 4 KB of RAM. Silicon Labs describes the Flash as 32K × 8, reflecting its byte-programmable organization, while the manufacturer device page identifies 4 KB of RAM. This memory footprint is appropriate for compact control firmware, but applications requiring substantial local buffering, graphical assets, or protocol libraries should assess firmware and RAM demand before design freeze.
Can the EFM32TG840F32-QFN64T drive an LCD?
Yes. The EFM32TG840F32-QFN64T includes a controller identified for an 8 × 20 segment LCD. This integration can reduce external display-driver circuitry and simplify compact instruments, meters, appliances, and control panels. The LCD segment mapping, bias configuration, glass requirements, and alternative-function assignments must be configured in firmware and checked against the selected display’s electrical requirements.
Is the EFM32TG840F32-QFN64T suitable for battery-powered equipment?
The EFM32TG840F32-QFN64T is suitable for battery-powered equipment when its energy-saving modes and fast wake-up behavior support the required duty cycle. Silicon Labs positions the Tiny Gecko family around low-power embedded control rather than continuous high-performance computing. Final suitability depends on the average load, sleep duration, wake-up frequency, analog activity, and overall board leakage, which should be measured in the finished system.
What is the difference between EFM32TG840F32-QFN64T and EFM32G840F32-QFN64?
Both devices are 32 MHz ARM Cortex-M3 microcontrollers in the 64-QFN form factor, but they belong to different Silicon Labs families and are not interchangeable without qualification. The Tiny Gecko EFM32TG840F32-QFN64T has 4 KB RAM, while the Gecko EFM32G840F32-QFN64 is listed with 8 KB RAM. Peripheral sets, low-power behavior, firmware, and register-level compatibility must be checked before considering a substitution.
When should I choose EFM32TG840F32-QFN64T over EFM32TG840F64-QFN64T?
Choose EFM32TG840F32-QFN64T when 32 KB of Flash is sufficient and lower memory use is a design priority. Choose EFM32TG840F64-QFN64T when the firmware needs additional program storage for larger protocol stacks, logging, or update images. Both maintain the same 32 MHz Cortex-M3 execution target and 64-QFN footprint family, so the selection should be driven by validated memory requirements rather than processor performance.
Is EFM32TG840F32-QFN64T suitable for an industrial sensor node?
The EFM32TG840F32-QFN64T is suitable for many industrial sensor nodes because it combines a 32 MHz ARM Cortex-M3 core, low-power modes, 56 I/O pins, two timers, AES hardware, and three operational amplifiers. Its 32 KB Flash and 4 KB RAM suit compact acquisition and control firmware. Industrial suitability still depends on temperature grade, immunity requirements, isolation, protection, and the enclosure used in the final installation.
What can replace EFM32TG840F32-QFN64T?
The closest documented replacement family members are other EFM32TG840 flash configurations in the same 64-QFN footprint, including EFM32TG840F64-QFN64T and EFM32TG840F16-QFN64T. Flash capacity, temperature suffix, exposed-pad implementation, pin multiplexing, and firmware configuration must be checked before replacement. No verified cross-brand drop-in replacement is established, so a foreign MCU should not be treated as a drop-in part.
What is the best cross-brand equivalent for EFM32TG840F32-QFN64T?
No cross-brand equivalent can be recommended confidently as a drop-in replacement for the EFM32TG840F32-QFN64T. A same-package ARM Cortex-M3 MCU is not automatically interchangeable because peripheral mapping, analog integration, LCD control, AES implementation, bootloader behavior, and software support may differ. A candidate should enter qualification only after its complete 64-QFN pin table and EFM32 firmware requirements have been compared.
Where can I buy EFM32TG840F32-QFN64T online?
Use the Request a Quote form on this page to request the EFM32TG840F32-QFN64T, current lead time, stock status, and order quantity. The form connects the request with XAIPART’s sales process and is the appropriate channel for exact-part sourcing, including the 64-QFN package and T suffix. Confirm the authorized ordering code and delivery details when the quotation is returned.
What is the price of EFM32TG840F32-QFN64T?
The current EFM32TG840F32-QFN64T price is handled through the Request a Quote form on this page. Submit the required quantity, target date, and packaging preference so the commercial team can return a current offer for the exact 64-QFN part. Pricing can vary with order quantity, availability, and market conditions, so an older catalog figure should not be used for a production commitment.
What is the lead time for EFM32TG840F32-QFN64T?
Request the current EFM32TG840F32-QFN64T lead time through the Request a Quote form on this page. Include the required quantity, production schedule, and approved packaging format so procurement can confirm the correct supply condition. Because availability can change by lot and order size, use the quotation response for planning rather than relying on a generic stock estimate.
Is EFM32TG840F32-QFN64T in stock?
The current stock condition for the EFM32TG840F32-QFN64T should be confirmed through the Request a Quote form on this page. Include the required quantity and delivery target so sales can check the exact suffix, including the tape-and-reel ordering code. The form provides a direct answer for the requested configuration and avoids treating a generic product-page listing as a guaranteed inventory commitment.

Data referensi engineering untuk EFM32TG840F32-QFN64T — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the EFM32TG840F32-QFN64T when a design needs a 32 MHz Cortex-M3, 32 KB Flash, 4 KB RAM, 56 I/O pins, an 8 × 20 LCD controller, AES hardware, and three integrated operational amplifiers in a 64-QFN footprint. Select EFM32TG840F64-QFN64T or EFM32TG840F128-QFN64T when larger firmware images justify additional Flash without requiring a faster processor. Use EFM32TG840F16-QFN64T only when 16 KB Flash is sufficient. The non-T EFM32TG840F32-QFN64 is appropriate only when its standard temperature grade meets the deployment conditions. Treat EFM32G840F32-QFN64 as a different family rather than a drop-in part because its RAM and low-power architecture differ. No cross-brand replacement should be approved without a complete pin, electrical, peripheral, and firmware comparison.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini EFM32TG840F32-QFN64 EFM32TG840F64-QFN64T EFM32TG840F128-QFN64T EFM32TG840F16-QFN64T EFM32TG840F16-QFN64
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Package QFN-64 (9 mm × 9 mm) QFN-64 (9 mm × 9 mm) QFN-64 (9 mm × 9 mm) QFN-64 (9 mm × 9 mm) QFN-64 (9 mm × 9 mm) QFN-64 (9 mm × 9 mm)
CPU Core ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3
Maximum CPU Frequency 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz
Flash Memory 32 KB 32 KB 64 KB 128 KB 16 KB 16 KB
RAM 4 KB 4 KB 4 KB 4 KB 4 KB 4 KB
Temperature Grade T grade Standard grade T grade T grade T grade Standard grade

Diferensiator Kunci

  • Balances embedded memory with integrated analog and display resources (vsEFM32TG840F16-QFN64T)
  • Provides a lower-memory option without changing processor speed (vsEFM32TG840F128-QFN64T)
  • Combines three integrated operational amplifiers with the MCU (vsEFM32TG840F32-QFN64)

Catatan Desain

Use the official 64-QFN land pattern and verify whether the exposed thermal pad is electrically connected, soldered, or left isolated for the selected ordering code. Place the required bypass capacitors immediately beside their associated supply pins, using the shortest possible ground path. Route sensitive LCD, analog, and debug signals away from fast-switching nodes, and confirm the 9 mm × 9 mm package clearance against the assembled enclosure and neighboring components.

Design the 2.5 V or 3.3 V supply for both static and transient requirements, including startup and analog load steps. Check the selected external supply against the device's complete electrical limits before adding bulk capacitance. For low-power operation, gate unused peripherals and analog blocks in firmware, retain only required wake sources, and measure sleep current on the final PCB because leakage from external components can dominate the MCU contribution.

Do not treat a shared QFN footprint as sufficient proof that two devices are drop-in replacements. Compare the complete pin-description table, exposed-pad treatment, power pins, debugging pins, LCD functions, analog inputs, and alternate-function mappings. Also verify the firmware linker configuration and bootloader behavior when moving between flash capacities or ordering temperature grades. The EFM32G840 family is not a direct substitute for the Tiny Gecko EFM32TG840 family.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

Compliance declarations are not stated in the manufacturer or distributor material for this exact ordering code. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status with Silicon Labs before release.

Pencarian Terkait

efm32tg840f32 d qfn64 EFM32TG840F32-QFN64T datasheet EFM32TG840F32-QFN64T pinout EFM32TG840F32-QFN64T datasheet pdf EFM32TG840F32-QFN64T specifications Silicon Labs EFM32TG840F32-QFN64T EFM32TG840F32-QFN64T equivalent EFM32TG840F32-QFN64T replacement EFM32TG840F32-QFN64T vs EFM32G840F32-QFN64 EFM32TG840F32-QFN64T QFN-64 footprint EFM32TG840F32-QFN64T price EFM32TG840F32-QFN64T stock

Komponen dan Istilah Terkait

Silicon Labs EFM32TG840F32-QFN64T EFM32TG840F32-QFN64 EFM32TG840F64-QFN64T EFM32TG840F128-QFN64T EFM32TG840F16-QFN64T EFM32G840F32-QFN64 ARM Cortex-M3 EFM32 Tiny Gecko microcontroller MCU 32-bit RISC processor embedded system low-power platform energy-saving mode fast wake-up 32 KB Flash memory 4 KB RAM AES accelerator operational amplifier 8 × 20 LCD controller 64-QFN package QFN package family surface-mount device industrial sensor node
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ