EFM32TG840F32-QFN64T - 32MHz Cortex-M3 | Silicon Labs
部品番号: EFM32TG840F32-QFN64T ✓ 生産中EFM32TG840F32-QFN64T 概要
A microcontroller is a programmable system-on-chip containing a processor core, memory, peripherals, and interfaces on one die. In the embedded-device hierarchy, the EFM32TG840 belongs to the 32-bit MCU and ARM Cortex-M3 product families, with the Cortex-M core supporting efficient control processing while the integrated peripherals reduce component count and board area.
The EFM32TG840F32-QFN64T combines a maximum 32 MHz processor speed with 32 KB Flash and 4 KB RAM. Its 56 digital I/O pins provide access to mixed analog and digital functions, while two 16-bit timers support periodic timing, input capture, and output compare tasks. The integrated AES accelerator supports hardware-assisted encrypted communication, and the three operational amplifiers can handle low-level signal conditioning without separate amplifier packages.
Silicon Labs implements this controller on its energy-conscious EFM32 platform, which combines low-power operating techniques with fast wake-up behavior. The MCU is positioned for systems that need deterministic control and compact integration but do not require the larger memory resources or peripheral set of a high-end application processor. Its operating voltage is identified as 2.5 V or 3.3 V in the device comparison material.
Typical uses include industrial sensor nodes, compact energy meters, building controls, portable measurement equipment, connected instruments, and LCD-driven user interfaces. The LCD controller permits direct segment display support, while the integrated analog amplifiers are useful for low-frequency sensor conditioning and current-feedback signal paths. The 56 I/O pins also allow peripheral sharing without immediately exhausting package I/O resources.
PCB design should preserve short analog and digital return paths, place decoupling capacitors close to the supply pins, and follow the manufacturer land pattern for the 64-QFN footprint. Confirm the exact exposed-pad connection, pin assignments, decoupling network, and programming configuration against the official device documentation before manufacturing a new board.
This page combines the manufacturer device specifications with practical application guidance, drop-in family comparisons, interface considerations, and sourcing information. It is designed to help engineers evaluate the EFM32TG840F32-QFN64T for low-power embedded control without overlooking memory capacity, analog integration, package constraints, or firmware-family compatibility.
ドロップイン代替品: EFM32TG840F32-QFN64T — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: EFM32TG840F32-QFN64T (同一形状・フットプリント) — 相違点: Flash Memory, Package, Architecture, Low-Power Features, Product Type.
EFM32TG840F32-QFN64
✅ ドロップイン価格はお問い合わせください
データシートを見る →EFM32TG840F64-QFN64T
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
EFM32TG840F128-QFN64T
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
EFM32TG840F16-QFN64T
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →EFM32TG840F16-QFN64
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →EFM32TG840F32-QFN64T 最大定格&電気的特性
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 32 KB (32K × 8) |
| RAM | 4 KB |
| Digital I/O Pins | 56 pins |
| Timer Count | 2 × 16-bit timers |
| LCD Controller | 8 × 20 segments |
| Crypto Accelerator | AES hardware accelerator |
| Integrated Operational Amplifiers | 3 operational amplifiers |
| Processor Core | ARM Cortex-M3 |
| Architecture | 32-bit single-core RISC |
| Operating Supply | 2.5 V or 3.3 V |
| パッケージ | 64-QFN (9 mm × 9 mm) |
| 実装タイプ | Surface mount |
| Low-Power Features | Energy-saving modes and fast wake-up |
EFM32TG840F32-QFN64T 64-qfn (9 mm × 9 mm) ピン配置ガイド
EFM32TG840F32-QFN64T (64-qfn (9 mm × 9 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: EFM32TG840F32-QFN64T.
詳細は データシート をご参照ください。
主な用途
EFM32TG840F32-QFN64T の用途: 6 件s: Industrial Sensor Node, Smart Energy Meter, Connected Building Control, Portable Measurement Instrument, Encrypted Communication Endpoint, Compact User Interface Controller.
Industrial Sensor Node
The EFM32TG840F32-QFN64T fits compact industrial sensor nodes that combine acquisition, local processing, and secure communication. Its 32 MHz ARM Cortex-M3 core provides responsive control, while 32 KB Flash accommodates a focused firmware image and 4 KB RAM supports short measurement buffers. Three integrated operational amplifiers can condition sensor signals without adding separate amplifier packages, and the AES accelerator supports hardware-assisted protection of transmitted data. The 56 I/O pins leave room for sensors, digital inputs, status indicators, and communications. Energy-saving modes and fast wake-up are particularly useful when the node samples periodically rather than operating continuously.
おすすめ
Smart Energy Meter
The EFM32TG840F32-QFN64T is appropriate for compact metering equipment that must calculate measurements, drive a display, and communicate through a low-power serial interface. Its two 16-bit timers support accurate timebase or pulse-counting functions, while the integrated 8 × 20 LCD controller can drive segmented meter displays directly. The three operational amplifiers are useful for conditioning low-level current or voltage signals before conversion. With 32 KB Flash and 4 KB RAM, the device favors a focused meter application rather than a large historical data store. Fast wake-up can reduce perceived update latency while the controller remains in an energy-saving mode between measurement events.
おすすめ
Connected Building Control
The EFM32TG840F32-QFN64T works well in distributed building-control endpoints that monitor inputs and operate relays or actuators over a low-speed network. The 56 GPIO pins can support digital sensors, addressable interfaces, and status controls, while the 32 MHz Cortex-M3 core can run protocol and control tasks concurrently through its interrupt-driven peripheral architecture. AES hardware adds value in connected equipment where encrypted links are required. The device’s low-power modes make it suitable for rooms or zones that are sparsely occupied, provided the wake source and periodic sensing strategy are designed carefully. Firmware should use the manufacturer’s low-power guidance to avoid accidental peripheral activity during sleep.
おすすめ
Portable Measurement Instrument
The EFM32TG840F32-QFN64T is suited to handheld measurement instruments where low power, analog integration, and local display support matter. The three operational amplifiers can implement buffering or gain stages close to the sensor, reducing external analog hardware and improving board utilization. Its 8 × 20 LCD controller simplifies segmented status and measurement displays, while AES hardware can protect stored configuration or connected data. A 32 MHz Cortex-M3 core handles timing, signal control, and user-interface updates, and the 4 KB RAM supports compact working sets. For battery operation, the firmware should shut down unused analog blocks and peripheral clocks and verify the real sleep current with the complete analog front end attached.
おすすめ
Encrypted Communication Endpoint
The EFM32TG840F32-QFN64T can serve as an encrypted communication endpoint in compact security-sensitive control equipment. Its hardware AES accelerator offloads cryptographic processing from the 32 MHz Cortex-M3 core, leaving more processing capacity for protocol handling and application tasks. Serial interface controllers can connect the MCU to transceivers or sensors, and the 56 GPIO pins provide control and status lines without immediate package-routing pressure. Fast wake-up allows the endpoint to respond promptly while remaining in an energy-saving state between exchanges. Security validation must still cover key storage, protocol implementation, certificate handling, physical tamper resistance, and firmware-update procedures; the AES block alone does not secure the complete product.
おすすめ
Compact User Interface Controller
The EFM32TG840F32-QFN64T is useful as the central controller in a compact keypad, menu, or segmented-display interface. The integrated 8 × 20 LCD controller reduces the need for a separate display controller, while 56 GPIO pins can support matrix keys, indicators, rotary encoders, and navigation controls. The 32 MHz Cortex-M3 core provides enough responsiveness for debouncing, menu state, and communications without a separate display processor. Its three operational amplifiers are useful when the same board also handles analog sensing or gain adjustment. Because the LCD and key requirements determine pin multiplexing, finalize the display and control assignments against the official pin table before schematic routing and consider adding a simple GPIO expander when spare pins are limited.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: EFM32TG840F32-QFN64T — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | EFM32TG840F32-QFN64 | EFM32TG840F64-QFN64T | EFM32TG840F128-QFN64T | EFM32TG840F16-QFN64T | EFM32TG840F16-QFN64 |
|---|---|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | QFN-64 (9 mm × 9 mm) | QFN-64 (9 mm × 9 mm) | QFN-64 (9 mm × 9 mm) | QFN-64 (9 mm × 9 mm) | QFN-64 (9 mm × 9 mm) | QFN-64 (9 mm × 9 mm) |
| CPU Core | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 32 KB | 32 KB | 64 KB | 128 KB | 16 KB | 16 KB |
| RAM | 4 KB | 4 KB | 4 KB | 4 KB | 4 KB | 4 KB |
| Temperature Grade | T grade | Standard grade | T grade | T grade | T grade | Standard grade |
主な差別化要因
- Balances embedded memory with integrated analog and display resources (vs EFM32TG840F16-QFN64T)
- Provides a lower-memory option without changing processor speed (vs EFM32TG840F128-QFN64T)
- Combines three integrated operational amplifiers with the MCU (vs EFM32TG840F32-QFN64)
設計ノート
Use the official 64-QFN land pattern and verify whether the exposed thermal pad is electrically connected, soldered, or left isolated for the selected ordering code. Place the required bypass capacitors immediately beside their associated supply pins, using the shortest possible ground path. Route sensitive LCD, analog, and debug signals away from fast-switching nodes, and confirm the 9 mm × 9 mm package clearance against the assembled enclosure and neighboring components.
Design the 2.5 V or 3.3 V supply for both static and transient requirements, including startup and analog load steps. Check the selected external supply against the device's complete electrical limits before adding bulk capacitance. For low-power operation, gate unused peripherals and analog blocks in firmware, retain only required wake sources, and measure sleep current on the final PCB because leakage from external components can dominate the MCU contribution.
Do not treat a shared QFN footprint as sufficient proof that two devices are drop-in replacements. Compare the complete pin-description table, exposed-pad treatment, power pins, debugging pins, LCD functions, analog inputs, and alternate-function mappings. Also verify the firmware linker configuration and bootloader behavior when moving between flash capacities or ordering temperature grades. The EFM32G840 family is not a direct substitute for the Tiny Gecko EFM32TG840 family.
コンプライアンス情報
Compliance declarations are not stated in the manufacturer or distributor material for this exact ordering code. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status with Silicon Labs before release.