EP2C5T144C8N - Cyclone II FPGA 4,608 LEs 89 I/O 144-TQFP | Intel
MPN: EP2C5T144C8N ✓ AktifEP2C5T144C8N Ringkasan
An FPGA (Field-Programmable Gate Array) is a programmable logic device (PLD) — a category of semiconductor IC that sits between an ASIC and a CPLD in the programmable logic hierarchy: ASIC < PLD < CPLD < FPGA. Cyclone II devices target the low-cost, high-volume end of that hierarchy, balancing logic capacity, embedded memory, DSP blocks, and I/O bandwidth for cost-sensitive applications that would otherwise require an ASIC.
Key features include 4,608 logic elements, 119,808 RAM bits organized in M4K blocks, 13 embedded 18x18 (9x9 mode) multipliers, two general-purpose PLLs, support for DDR/DDR2/QDRII SRAM and LVDS I/O standards, and an on-chip configuration controller supporting serial, parallel, and JTAG configuration modes. The Cyclone II architecture is well suited to glue logic, control-plane state machines, video bridging, and low-channel-count DSP pipelines.
The 90 nm process and 1.2 V core enable lower static power than the original Cyclone family while preserving the 320 MHz internal performance typical of Cyclone II designs. The 144-pin TQFP package exposes 89 user I/Os with support for single-ended standards such as LVTTL, LVCMOS, SSTL, and PCI, plus LVDS pairs — sufficient for parallel buses, video interfaces, and DDR memory controllers.
Typical applications include industrial control, video surveillance and image processing front-ends, motor and inverter control, telecom line cards, low-cost ASIC prototyping, and educational FPGA development boards. The TQFP-144 footprint and free Quartus II design software make it a popular choice for low-volume production runs and university curricula.
When designing with this part, ensure all VCCINT, VCCIO, and PLL analog supply pins are decoupled with 0.1 µF and 10 µF capacitors placed within 5 mm of the package. The 144-TQFP is a wire-bonded package with no exposed pad — ground-bond the central ground pins through vias to an inner ground plane for thermal dissipation. Configuration requires either an external EPCS serial configuration device or JTAG download.
This page synthesizes distributor pricing, verified Cyclone II cross-reference alternatives, and practical design notes not found in the manufacturer datasheet — providing decision-grade context for engineers specifying cost-sensitive FPGA logic.
Alternatif penggantian untuk EP2C5T144C8N — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian EP2C5T144C8N (sama faktor bentuk dan footprint) — berbeda di dalam Package, RoHS Status, Operating Temperature, Process Technology, Speed Grade.
EP2C5T144C8
✅ Drop-InKontak untuk harga
Lihat Datasheet →EP2C5T144C7N
✅ Drop-InKontak untuk harga
Lihat Datasheet →EP2C5T144C6N
✅ Drop-InKontak untuk harga
Lihat Datasheet →EP2C5T144A7N
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
EP2C5AF256I8N
✅ Drop-InKontak untuk harga
Lihat Datasheet →LCMXO2-1200HC-4TG144C
✅ Drop-InKontak untuk harga
Lihat Datasheet →EP2C5T144C8N Rating Maksimal & Karakteristik Listrik
| Family | Cyclone II |
| Logic Elements (LE) | 4,608 |
| Embedded Memory | 119,808 bits (M4K blocks) |
| Embedded Multipliers (9x9) | 13 |
| User I/Os | 89 |
| PLLs | 2 |
| Core Voltage (VCCINT) | 1.15 V to 1.25 V (typ. 1.2 V) |
| I/O Voltage (VCCIO) | 1.5 V / 1.8 V / 2.5 V / 3.3 V (bank-dependent) |
| Speed Grade | 8 |
| Process Technology | TSMC 90 nm low-k |
| Paket | 144-pin TQFP (T144), 22x22 mm |
| Suhu Kerja | 0 °C to +85 °C (commercial) |
| Tipe Mounting | Surface Mount |
| Configuration Mode | Serial / Parallel / JTAG |
| Status RoHS | Compliant (lead-free, 'N' suffix) |
Konfigurasi Pin EP2C5T144C8N
| Pin produk 1 | I/O Bank 1 — User I/O pin (bank 1) |
| Pin produk 2 | I/O Bank 1 — User I/O pin (bank 1) |
| Pin produk 3 | I/O Bank 1 — User I/O pin (bank 1) |
| Pin produk 4 | VCCINT — Core voltage supply (1.2 V) |
| Pin produk 5 | I/O Bank 1 — User I/O pin (bank 1) |
| Pin produk 6 | I/O Bank 1 — User I/O pin (bank 1) |
| Pin produk 7 | GND — Ground |
| Pin produk 8 | I/O Bank 1 — User I/O pin (bank 1) |
| Pin produk 9 | I/O Bank 1 — User I/O pin (bank 1) |
| Pin produk 10 | I/O Bank 1 — User I/O pin (bank 1) |
| Pin produk 11 | VCCIO1 — I/O bank 1 voltage reference |
| Pin produk 12 | I/O Bank 1 — User I/O pin (bank 1) |
| Pin produk 13 | I/O Bank 2 — User I/O pin (bank 2) |
| Pin produk 14 | I/O Bank 2 — User I/O pin (bank 2) |
| Pin produk 15 | GND — Ground |
| Pin produk 16 | I/O Bank 2 — User I/O pin (bank 2) |
| Pin produk 17 | I/O Bank 2 — User I/O pin (bank 2) |
| Pin produk 18 | I/O Bank 2 — User I/O pin (bank 2) |
| Pin produk 19 | VCCIO2 — I/O bank 2 voltage reference |
| Pin produk 20 | I/O Bank 2 — User I/O pin (bank 2) |
| Pin produk 21 | I/O Bank 2 — User I/O pin (bank 2) |
| Pin produk 22 | I/O Bank 2 — User I/O pin (bank 2) |
| Pin produk 23 | GND — Ground |
| Pin produk 24 | I/O Bank 2 — User I/O pin (bank 2) |
| Pin produk 25 | I/O Bank 3 — User I/O pin (bank 3) |
| Pin produk 26 | I/O Bank 3 — User I/O pin (bank 3) |
| Pin produk 27 | I/O Bank 3 — User I/O pin (bank 3) |
| Pin produk 28 | VCCIO3 — I/O bank 3 voltage reference |
| Pin produk 29 | I/O Bank 3 — User I/O pin (bank 3) |
| Pin produk 30 | I/O Bank 3 — User I/O pin (bank 3) |
| Pin produk 31 | I/O Bank 3 — User I/O pin (bank 3) |
| Pin produk 32 | GND — Ground |
| Pin produk 33 | I/O Bank 3 — User I/O pin (bank 3) |
| Pin produk 34 | I/O Bank 3 — User I/O pin (bank 3) |
| Pin produk 35 | I/O Bank 3 — User I/O pin (bank 3) |
| Pin produk 36 | VCCINT — Core voltage supply (1.2 V) |
| Pin produk 37 | I/O Bank 4 — User I/O pin (bank 4) |
| Pin produk 38 | I/O Bank 4 — User I/O pin (bank 4) |
| Pin produk 39 | I/O Bank 4 — User I/O pin (bank 4) |
| Pin produk 40 | VCCIO4 — I/O bank 4 voltage reference |
| Pin produk 41 | I/O Bank 4 — User I/O pin (bank 4) |
| Pin produk 42 | I/O Bank 4 — User I/O pin (bank 4) |
| Pin produk 43 | GND — Ground |
| Pin produk 44 | I/O Bank 4 — User I/O pin (bank 4) |
| Pin produk 45 | I/O Bank 4 — User I/O pin (bank 4) |
| Pin produk 46 | I/O Bank 4 — User I/O pin (bank 4) |
| Pin produk 47 | I/O Bank 4 — User I/O pin (bank 4) |
| Pin produk 48 | I/O Bank 5 — User I/O pin (bank 5) |
| Pin produk 49 | I/O Bank 5 — User I/O pin (bank 5) |
| Pin produk 50 | VCCIO5 — I/O bank 5 voltage reference |
| Pin produk 51 | I/O Bank 5 — User I/O pin (bank 5) |
| Pin produk 52 | I/O Bank 5 — User I/O pin (bank 5) |
| Pin produk 53 | GND — Ground |
| Pin produk 54 | I/O Bank 5 — User I/O pin (bank 5) |
| Pin produk 55 | I/O Bank 5 — User I/O pin (bank 5) |
| Pin produk 56 | I/O Bank 5 — User I/O pin (bank 5) |
| Pin produk 57 | VCCINT — Core voltage supply (1.2 V) |
| Pin produk 58 | I/O Bank 5 — User I/O pin (bank 5) |
| Pin produk 59 | I/O Bank 6 — User I/O pin (bank 6) |
| Pin produk 60 | I/O Bank 6 — User I/O pin (bank 6) |
| Pin produk 61 | I/O Bank 6 — User I/O pin (bank 6) |
| Pin produk 62 | GND — Ground |
| Pin produk 63 | I/O Bank 6 — User I/O pin (bank 6) |
| Pin produk 64 | I/O Bank 6 — User I/O pin (bank 6) |
| Pin produk 65 | VCCIO6 — I/O bank 6 voltage reference |
| Pin produk 66 | I/O Bank 6 — User I/O pin (bank 6) |
| Pin produk 67 | I/O Bank 6 — User I/O pin (bank 6) |
| Pin produk 68 | I/O Bank 6 — User I/O pin (bank 6) |
| Pin produk 69 | I/O Bank 6 — User I/O pin (bank 6) |
| Pin produk 70 | GND — Ground |
| Pin produk 71 | I/O Bank 7 — User I/O pin (bank 7) |
| Pin produk 72 | I/O Bank 7 — User I/O pin (bank 7) |
| Pin produk 73 | I/O Bank 7 — User I/O pin (bank 7) |
| Pin produk 74 | VCCIO7 — I/O bank 7 voltage reference |
| Pin produk 75 | I/O Bank 7 — User I/O pin (bank 7) |
| Pin produk 76 | I/O Bank 7 — User I/O pin (bank 7) |
| Pin produk 77 | GND — Ground |
| Pin produk 78 | I/O Bank 7 — User I/O pin (bank 7) |
| Pin produk 79 | I/O Bank 7 — User I/O pin (bank 7) |
| Pin produk 80 | I/O Bank 7 — User I/O pin (bank 7) |
| Pin produk 81 | VCCINT — Core voltage supply (1.2 V) |
| Pin produk 82 | I/O Bank 8 — User I/O pin (bank 8) |
| Pin produk 83 | I/O Bank 8 — User I/O pin (bank 8) |
| Pin produk 84 | I/O Bank 8 — User I/O pin (bank 8) |
| Pin produk 85 | GND — Ground |
| Pin produk 86 | I/O Bank 8 — User I/O pin (bank 8) |
| Pin produk 87 | I/O Bank 8 — User I/O pin (bank 8) |
| Pin produk 88 | VCCIO8 — I/O bank 8 voltage reference |
| Pin produk 89 | I/O Bank 8 — User I/O pin (bank 8) |
| Pin produk 90 | I/O Bank 8 — User I/O pin (bank 8) |
| Pin produk 91 | I/O Bank 8 — User I/O pin (bank 8) |
| Pin produk 92 | I/O Bank 8 — User I/O pin (bank 8) |
| Pin produk 93 | GND — Ground |
| Pin produk 94 | TMS — JTAG test mode select |
| Pin produk 95 | TCK — JTAG test clock |
| Pin produk 96 | TDO — JTAG test data out |
| Pin produk 97 | TDI — JTAG test data in |
| Pin produk 98 | NC — Not connected (per datasheet) |
| Pin produk 99 | VCCA_PLL1 — PLL1 analog supply (1.2 V) |
| Pin produk 100 | GNDA_PLL1 — PLL1 analog ground |
| Pin produk 101 | I/O Bank 1 — User I/O pin (bank 1) |
| Pin produk 102 | I/O Bank 1 — User I/O pin (bank 1) |
| Pin produk 103 | VCCIO1 — I/O bank 1 voltage reference |
| Pin produk 104 | I/O Bank 1 — User I/O pin (bank 1) |
| Pin produk 105 | I/O Bank 1 — User I/O pin (bank 1) |
| Pin produk 106 | GND — Ground |
| Pin produk 107 | I/O Bank 1 — User I/O pin (bank 1) |
| Pin produk 108 | I/O Bank 1 — User I/O pin (bank 1) |
| Pin produk 109 | I/O Bank 1 — User I/O pin (bank 1) |
| Pin produk 110 | I/O Bank 1 — User I/O pin (bank 1) |
| Pin produk 111 | VCCINT — Core voltage supply (1.2 V) |
| Pin produk 112 | I/O Bank 1 — User I/O pin (bank 1) |
| Pin produk 113 | I/O Bank 1 — User I/O pin (bank 1) |
| Pin produk 114 | I/O Bank 1 — User I/O pin (bank 1) |
| Pin produk 115 | GND — Ground |
| Pin produk 116 | I/O Bank 1 — User I/O pin (bank 1) |
| Pin produk 117 | I/O Bank 1 — User I/O pin (bank 1) |
| Pin produk 118 | I/O Bank 1 — User I/O pin (bank 1) |
| Pin produk 119 | I/O Bank 1 — User I/O pin (bank 1) |
| Pin produk 120 | VCCIO1 — I/O bank 1 voltage reference |
| Pin produk 121 | I/O Bank 2 — User I/O pin (bank 2) |
| Pin produk 122 | I/O Bank 2 — User I/O pin (bank 2) |
| Pin produk 123 | I/O Bank 2 — User I/O pin (bank 2) |
| Pin produk 124 | GND — Ground |
| Pin produk 125 | I/O Bank 2 — User I/O pin (bank 2) |
| Pin produk 126 | I/O Bank 2 — User I/O pin (bank 2) |
| Pin produk 127 | I/O Bank 2 — User I/O pin (bank 2) |
| Pin produk 128 | I/O Bank 2 — User I/O pin (bank 2) |
| Pin produk 129 | VCCINT — Core voltage supply (1.2 V) |
| Pin produk 130 | I/O Bank 2 — User I/O pin (bank 2) |
| Pin produk 131 | I/O Bank 2 — User I/O pin (bank 2) |
| Pin produk 132 | I/O Bank 2 — User I/O pin (bank 2) |
| Pin produk 133 | GND — Ground |
| Pin produk 134 | VCCA_PLL2 — PLL2 analog supply (1.2 V) |
| Pin produk 135 | GNDA_PLL2 — PLL2 analog ground |
| Pin produk 136 | NC — Not connected (per datasheet) |
| Pin produk 137 | nCE — Chip enable (active low) |
| Pin produk 138 | nCONFIG — Configuration control (active low) |
| Pin produk 139 | nSTATUS — Configuration status (active low) |
| Pin produk 140 | CONF_DONE — Configuration done indicator |
| Pin produk 141 | I/O Bank 2 — User I/O pin (bank 2) |
| Pin produk 142 | I/O Bank 2 — User I/O pin (bank 2) |
| Pin produk 143 | VCCIO2 — I/O bank 2 voltage reference |
| Pin produk 144 | I/O Bank 2 — User I/O pin (bank 2) |
Aplikasi Umum
EP2C5T144C8N cocok untuk 6 aplikasis: Industrial Motor Control, Video Surveillance & Image Processing Front-End, ASIC Prototyping & Logic Verification, Telecom Line Card Glue Logic, Low-Cost FPGA Development & Education, LED Display & Lighting Controllers.
Industrial Motor Control
The EP2C5T144C8N fits industrial motor control because its 4,608 logic elements, 13 embedded 9x9 multipliers, and 2 PLLs deliver enough parallelism to run field-oriented control (FOC) algorithms on brushless DC and permanent-magnet motors in real time. With 89 user I/Os available, the FPGA can directly interface to multi-channel PWM drivers, quadrature encoder feedback, and resolver-to-digital converters without an external bridge IC. The two PLLs allow independent clock synthesis for the control loop ADC sampling and PWM switching frequencies, reducing BOM complexity compared with discrete MCU-plus-CPLD designs. Typical designs run the FPGA at 100-200 MHz with the MCU offloaded to dedicated logic, achieving sub-microsecond current-loop update rates. The 144-pin TQFP package is hand-rework friendly, supporting low-volume industrial servo drive production runs.
Direkomendasikan
Video Surveillance & Image Processing Front-End
The EP2C5T144C8N suits video surveillance front-ends because its 13 embedded multipliers and M4K RAM blocks enable real-time Bayer demosaic, gamma correction, and edge-detection pipelines for CIF/D1-resolution video streams. The 89 I/Os comfortably handle parallel BT.656 video input, video DAC outputs, and an SDRAM interface for frame buffering, while the 119,808 bits of embedded memory provide line-buffer storage directly in the fabric. The Cyclone II architecture supports DDR SDRAM controllers and LVDS I/O, allowing direct connection to CMOS image sensors and DVI outputs without external bridge chips. Designs typically target 27 MHz PAL/NTSC pixel clocks, easily closed within the C8 speed grade timing margins. The 144-pin TQFP footprint supports 4-layer FR4 PCBs compatible with consumer-grade surveillance camera form factors.
Direkomendasikan
ASIC Prototyping & Logic Verification
The EP2C5T144C8N is widely used for ASIC prototyping because its 4,608 LEs deliver enough capacity to map mid-sized ASIC blocks while preserving the I/O pin-out to validate RTL before tape-out. The 144-pin TQFP package is breadboard-friendly, allowing rapid schematic iteration without BGA rework costs. Engineers instantiate the ASIC's RTL into Quartus II synthesis, partition it across the Cyclone II logic, and use the 89 user I/Os as test stimulus and observation points. The two PLLs provide flexible clock division for matching the ASIC's target clock tree, and the JTAG interface supports live SignalTap logic analyzer insertion for real-time debug. Cost per prototyping board is minimized because the Cyclone II silicon is mature and inexpensive at low volume.
Direkomendasikan
Telecom Line Card Glue Logic
The EP2C5T144C8N suits telecom line-card glue-logic applications because it bridges legacy parallel buses, TDM framers, and clock distribution networks while providing on-chip PLLs for hitless reference-clock switching. The 89 I/Os accommodate 8-bit TDM data buses plus overhead channels, and the 119,808 bits of M4K RAM can buffer framing data without external FIFOs. Cyclone II supports SSTL and LVDS I/O standards, enabling direct connection to DDR memory and serializer/deserializer chips commonly found in line cards. The 1.2 V core reduces board power consumption compared with older 1.5 V FPGAs, easing thermal management in sealed line-card enclosures. The commercial 0 to 85 °C range fits controlled-environment central-office deployments where extended temperature is not required.
Direkomendasikan
Low-Cost FPGA Development & Education
The EP2C5T144C8N is the reference FPGA for university curricula and entry-level development boards because its 4,608 LEs provide enough capacity to teach digital logic, computer architecture, and HDL programming without overwhelming students. The free Quartus II Web Edition tool chain supports the Cyclone II family, eliminating licensing friction in classroom settings. The 144-pin TQFP package is hand-solderable on through-hole adapter boards, allowing students to breadboard designs without reflow equipment. Educational peripherals such as VGA, PS/2, and seven-segment displays fit within the 89 I/O budget, and the embedded M4K RAM blocks support RAM/ROM design exercises. The mature silicon and abundant distributor stock keep student lab kit costs low while ensuring long-term availability for multi-semester programs.
Direkomendasikan
LED Display & Lighting Controllers
The EP2C5T144C8N fits large-scale LED display and architectural lighting controllers because its 89 I/Os can drive dozens of PWM channels simultaneously for individual LED brightness and color mixing without external LED driver ICs. The 13 embedded multipliers accelerate gamma correction and color-space conversion computations, while the 119,808 bits of M4K RAM buffer frame data for synchronized multi-panel refresh. Two PLLs generate independent pixel-clock domains for cascaded display panels operating at different refresh rates. The 144-pin TQFP supports production reflow profiles compatible with high-volume LED panel assembly lines. Designers typically pair the FPGA with constant-current LED drivers on separate boards, with the Cyclone II acting as the pixel-data processor and refresh controller.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk EP2C5T144C8N — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | EP2C5T144C8 | EP2C5T144C7N | EP2C5T144C6N | EP2C5T144A7N | LCMXO2-1200HC-4TG144C |
|---|---|---|---|---|---|---|
| Package | TQFP-144 (T144) 22x22 mm | TQFP-144 (T144) 22x22 mm - same | TQFP-144 (T144) 22x22 mm - same | TQFP-144 (T144) 22x22 mm - same | TQFP-144 (T144) 22x22 mm - same | TQFP-144 - same footprint |
| Brand | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) | Lattice Semiconductor |
| Logic Elements | 4,608 LEs | 4,608 LEs | 4,608 LEs | 4,608 LEs | 4,608 LEs | 1,280 LUTs (-72%) |
| Speed Grade | 8 | 8 | 7 (faster) | 6 (fastest) | 7 (automotive) | 4 (Lattice grading) |
| Embedded Memory | 119,808 bits M4K | 119,808 bits M4K | 119,808 bits M4K | 119,808 bits M4K | 119,808 bits M4K | Embedded flash only; no SRAM blocks |
| Core Voltage | 1.15-1.25 V (1.2 V typ) | 1.15-1.25 V | 1.15-1.25 V | 1.15-1.25 V | 1.15-1.25 V | 1.2 V |
| RoHS / Lead-Free | Yes (N suffix) | No (tin-lead finish) | Yes (N suffix) | Yes (N suffix) | Yes (N suffix) | Yes |
Diferensiator Kunci
- Lowest-cost Cyclone II speed grade with full lead-free RoHS compliance (vsEP2C5T144C8)
- Pin-compatible speed grade scalability within Cyclone II family (vsEP2C5T144C7N / EP2C5T144C6N)
- Same-package cross-brand migration path with different architecture (vsLCMXO2-1200HC-4TG144C)
Catatan Desain
The EP2C5T144C8N requires three independent supply rails: VCCINT (1.15-1.25 V, 1.2 V typical) for the core logic, VCCIO per I/O bank (1.5 V / 1.8 V / 2.5 V / 3.3 V) for output buffers, and VCCA_PLL1/VCCA_PLL2 (1.2 V analog) for the PLL blocks. Decouple each VCCINT pin with a 0.1 µF X7R ceramic capacitor placed within 5 mm of the package. Add a 10 µF bulk tantalum or polymer capacitor at the regulator output to suppress FPGA in-rush transients. Estimated static current is approximately 25-50 mA for the EP2C5 die; dynamic current scales with toggle rate — budget 1 A for the VCCINT rail when many logic elements switch simultaneously.
The TQFP-144 package is wire-bonded with no exposed thermal pad, so the only heat-dissipation path is through the lead frame into PCB copper. Provide at least 4 vias under the center ground pins (GND) connected to a continuous inner ground plane on a 4-layer PCB to keep junction temperature within the 0 to 85 °C commercial operating range. At typical Cyclone II EP2C5 switching activity (~50 MHz, 50% utilization), junction-to-ambient thermal resistance (θJA) on a JEDEC 4-layer test board is approximately 35 °C/W. For designs near maximum logic utilization, verify junction temperature in the Quartus II PowerPlay early in the design cycle.
Route configuration signals (nCE, nCONFIG, nSTATUS, CONF_DONE, TMS, TCK, TDI, TDO) with 50 Ω controlled-impedance traces and pull-up resistors (10 kΩ typical) to VCCIO3 to ensure reliable boot. Decouple the PLL analog supplies (VCCA_PLL1, VCCA_PLL2) with separate ferrite-bead-isolated 1.2 V regulators and 0.1 µF + 10 µF capacitor networks to minimize jitter. Place an EPCS1 or EPCS4 serial configuration flash within 50 mm of the FPGA's DATA0/DCLK/ASDO/nCSO pins if using Active Serial configuration mode, with a 100 Ω series resistor at the DCLK output to dampen reflections.
Do not apply I/O voltage to a bank before VCCINT is stable — this can trigger I/O bus-keeper contention and latch-up. Always power VCCINT first, then VCCIO within 100 ms. Do not leave any VCCIO bank unpowered; an unpowered I/O pin receiving an external signal draws parasitic current. If you do not use a bank, connect its VCCIO pins to ground through a 10 kΩ resistor (per Cyclone II handbook). Verify all GND pins are bonded to the ground plane — floating grounds cause random configuration failures that are extremely difficult to debug.
Informasi Konformitas
Lead-free ('N' suffix) per JEDEC J-STD-020. Not AEC-Q100 qualified; use EP2C5T144A7N for automotive applications. RoHS compliance verified through Altera/Intel product page per Verified Web Data.
