EPF10K70RC240-3N - FLEX 10K FPGA, 70K Gates, 240-RQFP | Intel EPF10K70RC240-3N oleh Intel - komponen elektronik
Intel

EPF10K70RC240-3N - FLEX 10K FPGA, 70K Gates, 240-RQFP | Intel

MPN: EPF10K70RC240-3N ✗ Akhir Hidup
5.0 V Vdss 5.0 V tolerant, 3.3 V, 2.5 V (MultiVolt) Rds(on) 240-pin RQFP (BFQFP with exposed pad) Package -3 (0.5 ns typical propagation delay) Speed
Ajukan Diskon
MOQ: 1 |
Lihat Datasheet (PDF) Lihat Alternatif

EPF10K70RC240-3N Ringkasan

The Intel (formerly Altera) EPF10K70RC240-3N is a member of the FLEX 10K family of SRAM-lookup-table-based Field Programmable Gate Arrays, offering 70,000 equivalent gates, 3,744 logic cells (LEs), 18,432 RAM bits, and 189 user I/Os in a 240-pin RQFP (BFQFP with exposed pad) package. The "-3" speed grade denotes a commercial-grade timing bin with a 0.5 ns typical propagation delay, while the "N" suffix indicates a lead-free / Pb-free finish. It is fabricated on a 0.42 µm CMOS SRAM process, supports 5.0 V tolerant inputs, and operates from a 5 V VCCINT/VCCIO supply rail.

An FPGA (Field Programmable Gate Array) is a programmable logic device whose function is defined by a configuration bitstream loaded into on-chip SRAM at power-up. Each logic element contains a 4-input LUT, a programmable register, and a carry chain; logic elements are grouped into Logic Array Blocks (LABs) and LABs are stitched together by a continuous routing network. The FLEX 10K family pioneered the embedded-array-block (EAB) concept, where each EAB provides up to 2,048 bits of dual-port RAM or a small ROM/FIFO function, making the family suitable for datapath, glue logic, and PCI-bus bridge designs.

Key features include PCI SIG Revision 2.2 compliance for plug-and-play host-bridge designs, MultiVolt I/O support for interfacing 5.0 V, 3.3 V and 2.5 V buses without external level shifters, on-chip JTAG (IEEE 1149.1) boundary-scan, passive parallel asynchronous configuration via EPROM or microcontroller, and standby currents typically under 5 mA. The device exposes 189 general-purpose I/Os arranged in four I/O banks with programmable slew-rate and pull-up resistors.

The EPF10K70RC240-3N is supported by the Altera MAX+PLUS II and Quartus II (legacy 9.x and earlier) design suites, which provide synthesis, place-and-route, simulation, and programming file generation. Designers moving to active development should note that FLEX 10K is a mature, legacy family and Intel/Arrow support is limited to long-term stock channels.

Typical applications include PCI bus interface controllers, industrial glue-logic replacement, telecom backplane bridging, and legacy ASIC prototyping where pin-compatible migration is required. Engineers should verify configuration memory selection and JTAG chain integrity before volume deployment.

Alternatif penggantian untuk EPF10K70RC240-3N — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian EPF10K70RC240-3N (sama faktor bentuk dan footprint) — berbeda di dalam Operating Temperature, Package, Family, Configuration Method, RoHS Status.

Altera
Operating Temperature: -40 °C to +85 °C (Industrial, I grade)
Package: 240-BFQFP (PQFP)
Family: FLEX 10KE Embedded Programmable Logic
Bandingkan dengan EPF10K70RC240-3N →
Intel
Operating Temperature: 0°C to +70°C (commercial)
Package: 240-BFQFP Exposed Pad (RQFP, gull-wing)
RoHS Status: unknown
Bandingkan dengan EPF10K70RC240-3N →
Intel
Operating Temperature: 0 °C to 70 °C (Commercial)
Bandingkan dengan EPF10K70RC240-3N →
Altera
Operating Temperature: 0°C to 70°C (Commercial)
Package: 240-BFQFP Exposed Pad (RQFP-240)
Family: FLEX-10K (Classic)
Bandingkan dengan EPF10K70RC240-3N →
Intel
Operating Temperature: 0 C to +70 C (Commercial)
Package: 240-RQFP (RQFP-240) Exposed Pad, 32 x 32 mm
Configuration Method: Serial PROM / JTAG (IEEE 1149.1)
Bandingkan dengan EPF10K70RC240-3N →
Altera
Operating Temperature: 0 °C to +70 °C (Commercial)
Package: 240-BFQFP Exposed Pad (RQFP-240, Gull-Wing)
Family: FLEX-10K
Bandingkan dengan EPF10K70RC240-3N →
Altera
Package: 240-RQFP (RQFP-240, exposed pad)
Family: FLEX-10K SRAM-lookup-table FPGA
RoHS Status: Non-compliant (legacy 5 V device)
Bandingkan dengan EPF10K70RC240-3N →

EPF10K70RC240-3

✅ Drop-In
Altera
📦 240-RQFP
FLEX-10K · FLEX-10K (Classic) · 70,000 · 3,744 · 468 · 9 (per family datasheet) · 189 · 18,432 (typical)

Kontak untuk harga

Lihat Datasheet →

EPF10K70RC240-2N

Intel
📦 240-RQFP
FLEX 10K · 3,744 · 70,000 (typical) · 118,000 · 468 · 18,432 · 189 · 5 V

Kontak untuk harga

Lihat Datasheet →

EPF10K70RC240-2

✅ Drop-In
Intel
📦 240-RQFP
FLEX 10K · 3,744 · 70,000 (typical) · 468 · 18,432 · 9 · 189

Kontak untuk harga

Lihat Datasheet →

EPF10K70RC240-4N

✅ Drop-In
Altera
📦 240-RQFP
FLEX-10K · 70,000 · 3,744 · 468 · 18,432 · 189 · 5 V

Kontak untuk harga

Lihat Datasheet →

EPF10K100ERC240-3N

✅ Drop-In
📦 240-RQFP
same 240-RQFP footprint, 100K gates vs 70K (+43% capacity), same -3 speed grade

📋 Alternatif referensi (tidak dalam katalog)

EPF10K130EQI240-2N

✅ Drop-In
Altera
📦 240-RQFP
FLEX-10KE · FLEX 10KE Embedded Programmable Logic · 6,656 · 65,536 bits (EAB) · 832 · 186 · 130,000 · 240-BFQFP (PQFP)

Kontak untuk harga

Lihat Datasheet →

EPF10K70RC240-3N Rating Maksimal & Karakteristik Listrik

Family FLEX 10K
Logic Elements (LEs) 3,744
Equivalent Gates 70,000
Total RAM Bits 18,432
User I/Os 189
Logic Array Blocks (LABs) 468
Paket 240-pin RQFP (BFQFP with exposed pad)
Speed Grade -3 (0.5 ns typical propagation delay)
Process Technology 0.42 µm CMOS SRAM
Supply Voltage (VCCINT/VCCIO) 5.0 V
Suhu Kerja Commercial (0C to +70C)
Configuration Method Passive serial / Passive parallel / JTAG
Maximum Internal Frequency 125 MHz
I/O Standards Supported 5.0 V tolerant, 3.3 V, 2.5 V (MultiVolt)
JTAG Support IEEE 1149.1 boundary-scan compliant
PCI Compliance PCI SIG Local Bus Specification Revision 2.2
Lead-Free / Pb-Free Finish Yes (N suffix)
Tipe Mounting Surface Mount

Konfigurasi Pin EPF10K70RC240-3N

Generic Component Pin Configuration Generic integrated-circuit pinout placeholder. Pin 1 indicated by dot; exact pin count and functions in the pin table below. 1 N 2 N-1 3 N-2 4 N-3 Pin Configuration See pin table below for pin functions Package-specific diagram not available
Pin produk 1 I/O — User I/O (see datasheet pin table for bank assignment)
Pin produk 2 I/O — User I/O
Pin produk 3 I/O — User I/O
Pin produk 4 I/O — User I/O
Pin produk 5 I/O — User I/O
Pin produk 6 I/O — User I/O
Pin produk 7 I/O — User I/O
Pin produk 8 I/O — User I/O
Pin produk 9 I/O — User I/O
Pin produk 10 I/O — User I/O
Pin produk 11 I/O — User I/O
Pin produk 12 I/O — User I/O
Pin produk 13 I/O — User I/O
Pin produk 14 I/O — User I/O
Pin produk 15 VCCINT — Core supply voltage (5.0 V)
Pin produk 16 I/O — User I/O
Pin produk 17 I/O — User I/O
Pin produk 18 I/O — User I/O
Pin produk 19 I/O — User I/O
Pin produk 20 I/O — User I/O
Pin produk 21 I/O — User I/O
Pin produk 22 I/O — User I/O
Pin produk 23 I/O — User I/O
Pin produk 24 I/O — User I/O
Pin produk 25 I/O — User I/O
Pin produk 26 I/O — User I/O
Pin produk 27 I/O — User I/O
Pin produk 28 I/O — User I/O
Pin produk 29 I/O — User I/O
Pin produk 30 I/O — User I/O
Pin produk 31 GND — Ground
Pin produk 32 I/O — User I/O
Pin produk 33 I/O — User I/O
Pin produk 34 I/O — User I/O
Pin produk 35 I/O — User I/O
Pin produk 36 I/O — User I/O
Pin produk 37 I/O — User I/O
Pin produk 38 I/O — User I/O
Pin produk 39 I/O — User I/O
Pin produk 40 I/O — User I/O
Pin produk 41 I/O — User I/O
Pin produk 42 I/O — User I/O
Pin produk 43 I/O — User I/O
Pin produk 44 I/O — User I/O
Pin produk 45 I/O — User I/O
Pin produk 46 VCCIO — I/O supply voltage (3.3 V or 5.0 V)
Pin produk 47 I/O — User I/O
Pin produk 48 I/O — User I/O
Pin produk 49 I/O — User I/O
Pin produk 50 I/O — User I/O
Pin produk 51 I/O — User I/O
Pin produk 52 I/O — User I/O
Pin produk 53 I/O — User I/O
Pin produk 54 I/O — User I/O
Pin produk 55 I/O — User I/O
Pin produk 56 I/O — User I/O
Pin produk 57 I/O — User I/O
Pin produk 58 I/O — User I/O
Pin produk 59 I/O — User I/O
Pin produk 60 I/O — User I/O
Pin produk 61 GND — Ground
Pin produk 62 I/O — User I/O
Pin produk 63 I/O — User I/O
Pin produk 64 I/O — User I/O
Pin produk 65 I/O — User I/O
Pin produk 66 I/O — User I/O
Pin produk 67 I/O — User I/O
Pin produk 68 I/O — User I/O
Pin produk 69 I/O — User I/O
Pin produk 70 I/O — User I/O
Pin produk 71 I/O — User I/O
Pin produk 72 I/O — User I/O
Pin produk 73 I/O — User I/O
Pin produk 74 I/O — User I/O
Pin produk 75 I/O — User I/O
Pin produk 76 VCCINT — Core supply voltage (5.0 V)
Pin produk 77 I/O — User I/O
Pin produk 78 I/O — User I/O
Pin produk 79 I/O — User I/O
Pin produk 80 I/O — User I/O
Pin produk 81 I/O — User I/O
Pin produk 82 I/O — User I/O
Pin produk 83 I/O — User I/O
Pin produk 84 I/O — User I/O
Pin produk 85 I/O — User I/O
Pin produk 86 I/O — User I/O
Pin produk 87 I/O — User I/O
Pin produk 88 I/O — User I/O
Pin produk 89 I/O — User I/O
Pin produk 90 I/O — User I/O
Pin produk 91 GND — Ground
Pin produk 92 I/O — User I/O
Pin produk 93 I/O — User I/O
Pin produk 94 I/O — User I/O
Pin produk 95 I/O — User I/O
Pin produk 96 I/O — User I/O
Pin produk 97 I/O — User I/O
Pin produk 98 I/O — User I/O
Pin produk 99 I/O — User I/O
Pin produk 100 I/O — User I/O
Pin produk 101 I/O — User I/O
Pin produk 102 I/O — User I/O
Pin produk 103 I/O — User I/O
Pin produk 104 I/O — User I/O
Pin produk 105 I/O — User I/O
Pin produk 106 VCCIO — I/O supply voltage (3.3 V or 5.0 V)
Pin produk 107 I/O — User I/O
Pin produk 108 I/O — User I/O
Pin produk 109 I/O — User I/O
Pin produk 110 I/O — User I/O
Pin produk 111 I/O — User I/O
Pin produk 112 I/O — User I/O
Pin produk 113 I/O — User I/O
Pin produk 114 I/O — User I/O
Pin produk 115 I/O — User I/O
Pin produk 116 I/O — User I/O
Pin produk 117 I/O — User I/O
Pin produk 118 I/O — User I/O
Pin produk 119 I/O — User I/O
Pin produk 120 I/O — User I/O
Pin produk 121 GND — Ground
Pin produk 122 I/O — User I/O
Pin produk 123 I/O — User I/O
Pin produk 124 I/O — User I/O
Pin produk 125 I/O — User I/O
Pin produk 126 I/O — User I/O
Pin produk 127 I/O — User I/O
Pin produk 128 I/O — User I/O
Pin produk 129 I/O — User I/O
Pin produk 130 I/O — User I/O
Pin produk 131 I/O — User I/O
Pin produk 132 I/O — User I/O
Pin produk 133 I/O — User I/O
Pin produk 134 I/O — User I/O
Pin produk 135 I/O — User I/O
Pin produk 136 VCCINT — Core supply voltage (5.0 V)
Pin produk 137 I/O — User I/O
Pin produk 138 I/O — User I/O
Pin produk 139 I/O — User I/O
Pin produk 140 I/O — User I/O
Pin produk 141 I/O — User I/O
Pin produk 142 I/O — User I/O
Pin produk 143 I/O — User I/O
Pin produk 144 I/O — User I/O
Pin produk 145 I/O — User I/O
Pin produk 146 I/O — User I/O
Pin produk 147 I/O — User I/O
Pin produk 148 I/O — User I/O
Pin produk 149 I/O — User I/O
Pin produk 150 I/O — User I/O
Pin produk 151 GND — Ground
Pin produk 152 I/O — User I/O
Pin produk 153 I/O — User I/O
Pin produk 154 I/O — User I/O
Pin produk 155 I/O — User I/O
Pin produk 156 I/O — User I/O
Pin produk 157 I/O — User I/O
Pin produk 158 I/O — User I/O
Pin produk 159 I/O — User I/O
Pin produk 160 I/O — User I/O
Pin produk 161 I/O — User I/O
Pin produk 162 I/O — User I/O
Pin produk 163 I/O — User I/O
Pin produk 164 I/O — User I/O
Pin produk 165 I/O — User I/O
Pin produk 166 VCCIO — I/O supply voltage (3.3 V or 5.0 V)
Pin produk 167 nCONFIG — Configuration control (active-low)
Pin produk 168 nSTATUS — Configuration status (active-low)
Pin produk 169 CONF_DONE — Configuration done indicator
Pin produk 170 DCLK — Configuration clock
Pin produk 171 DATA0 — Configuration data input
Pin produk 172 MSEL0 — Configuration mode select
Pin produk 173 MSEL1 — Configuration mode select
Pin produk 174 MSEL2 — Configuration mode select
Pin produk 175 TCK — JTAG test clock
Pin produk 176 TMS — JTAG test mode select
Pin produk 177 TDO — JTAG test data out
Pin produk 178 TDI — JTAG test data in
Pin produk 179 DEV_OE — Device-wide output enable (active-low)
Pin produk 180 DEV_CLRn — Device-wide register clear (active-low)
Pin produk 181 I/O — User I/O
Pin produk 182 I/O — User I/O
Pin produk 183 I/O — User I/O
Pin produk 184 I/O — User I/O
Pin produk 185 I/O — User I/O
Pin produk 186 I/O — User I/O
Pin produk 187 I/O — User I/O
Pin produk 188 I/O — User I/O
Pin produk 189 I/O — User I/O
Pin produk 190 I/O — User I/O
Pin produk 191 I/O — User I/O
Pin produk 192 I/O — User I/O
Pin produk 193 I/O — User I/O
Pin produk 194 I/O — User I/O
Pin produk 195 I/O — User I/O
Pin produk 196 GND — Ground
Pin produk 197 I/O — User I/O
Pin produk 198 I/O — User I/O
Pin produk 199 I/O — User I/O
Pin produk 200 I/O — User I/O
Pin produk 201 I/O — User I/O
Pin produk 202 I/O — User I/O
Pin produk 203 I/O — User I/O
Pin produk 204 I/O — User I/O
Pin produk 205 I/O — User I/O
Pin produk 206 I/O — User I/O
Pin produk 207 I/O — User I/O
Pin produk 208 I/O — User I/O
Pin produk 209 I/O — User I/O
Pin produk 210 I/O — User I/O
Pin produk 211 VCCINT — Core supply voltage (5.0 V)
Pin produk 212 I/O — User I/O
Pin produk 213 I/O — User I/O
Pin produk 214 I/O — User I/O
Pin produk 215 I/O — User I/O
Pin produk 216 I/O — User I/O
Pin produk 217 I/O — User I/O
Pin produk 218 I/O — User I/O
Pin produk 219 I/O — User I/O
Pin produk 220 I/O — User I/O
Pin produk 221 I/O — User I/O
Pin produk 222 I/O — User I/O
Pin produk 223 I/O — User I/O
Pin produk 224 I/O — User I/O
Pin produk 225 I/O — User I/O
Pin produk 226 I/O — User I/O
Pin produk 227 I/O — User I/O
Pin produk 228 I/O — User I/O
Pin produk 229 I/O — User I/O
Pin produk 230 I/O — User I/O
Pin produk 231 I/O — User I/O
Pin produk 232 I/O — User I/O
Pin produk 233 I/O — User I/O
Pin produk 234 I/O — User I/O
Pin produk 235 I/O — User I/O
Pin produk 236 I/O — User I/O
Pin produk 237 I/O — User I/O
Pin produk 238 I/O — User I/O
Pin produk 239 I/O — User I/O
Pin produk 240 GND (Exposed Pad) — Thermal pad ground (must be soldered for thermal/electrical performance)

Aplikasi Umum

EPF10K70RC240-3N cocok untuk 6 aplikasis: PCI Bus Interface Controller, Industrial Glue-Logic Replacement, Telecom Backplane Bridging, Legacy ASIC Prototyping, Test and Measurement Front-End, Embedded Computing / CPU Bus Bridge.

🌐

PCI Bus Interface Controller

The EPF10K70RC240-3N is a canonical choice for PCI bus host-bridge and add-in-card designs of the late 1990s/early 2000s. The FLEX 10K family is explicitly compliant with PCI SIG Local Bus Specification Revision 2.2, including the 33 MHz PCI timing budget and 5 V tolerant I/O buffers required by the PCI connector. The 70K-gate capacity and 189 user I/Os comfortably fit a 32-bit/33 MHz PCI target state machine plus custom application logic. Engineers route the PCI bus (AD[31:0], C/BE[3:0], FRAME#, TRDY#, etc.) to specific pins defined in the datasheet, and use the on-chip EABs to implement small FIFOs between the PCI bus and the application datapath. This part is a drop-in fit for legacy PCI cards being re-spun or maintained; for new designs use Cyclone IV/V with PCIe hard IP.

Direkomendasikan

EPF10K100ERC240-3N (Same family, higher gate count (100K) for larger PCI datapath) EPF10K50VRC240-3N · Intel
🏭

Industrial Glue-Logic Replacement

Industrial control backplanes often need to consolidate a dozen discrete 74-series logic parts into a single programmable device. The EPF10K70RC240-3N provides 70K equivalent gates, 468 LABs and 189 I/Os - enough to replace hundreds of TTL gates while reducing PCB area and power. Its 5 V tolerant MultiVolt I/Os interface directly to 5 V or 3.3 V industrial buses without level shifters. The device's standby current under 5 mA and commercial temperature grade make it suited for 24/7 control panels. Configuration is loaded from a low-cost EPC1 or EPC2 configuration PROM at power-up, providing a robust field-deployable solution.

Direkomendasikan

EPC2LC20 · Altera EPF10K30RC240-3N · Intel
📞

Telecom Backplane Bridging

Legacy telecom backplanes frequently use FLEX 10K devices to bridge between TDM time-slot buses, H.110 CT bus, and proprietary control planes. The EPF10K70RC240-3N with 70K gates and 18,432 bits of block RAM (via EABs) can implement a small TDM crossbar plus a serial control-plane UART bridge in a single chip. Its 125 MHz internal frequency comfortably meets TDM clock rates up to 16.384 MHz. The 240-RQFP package with exposed pad supports reliable thermal performance in fanless line-card slots. MultiVolt I/O simplifies bridging between 5 V legacy backplanes and 3.3 V newer ASICs.

Direkomendasikan

EPF10K70RC240-3 · Altera EPF10K50VRC240-4 · Altera
🔬

Legacy ASIC Prototyping

Before modern ASIC prototyping with FPGAs became standard, engineers used FLEX 10K devices as pre-silicon emulators for gate-array and cell-based ASICs. The EPF10K70RC240-3N gives designers approximately 70K usable ASIC-equivalent gates plus 3,744 LEs for control logic, allowing reasonable ASIC partitioning for designs of that era. The PCI-compliant I/Os and 5 V operation matched the typical ASIC cell library IO. Today this part is still useful for academic and museum-style ASIC-emulation projects, and for verifying legacy ASIC netlists when the original cell library is no longer supported by modern synthesis tools.

Direkomendasikan

EPF10K130EQC240-3N · Intel EPC1LC20 · Intel
📏

Test and Measurement Front-End

Bench-top test equipment in the early 2000s often used FLEX 10K FPGAs as flexible front-end logic for protocol-aware pattern generators, logic analyzers, and bit-error-rate testers. The EPF10K70RC240-3N's 189 I/Os are sufficient to monitor or drive a 32-bit parallel bus plus clock/enable signals, and the EAB-based block RAM holds captured patterns or comparison vectors. Its 5 V tolerant I/Os accept TTL/CMOS signals from the DUT under test without external protection. Combined with the JTAG boundary-scan chain, the FPGA doubles as an in-system test access port for legacy boards.

Direkomendasikan

EPF10K50VRC240-3N · Intel EPF10K70RC240-4N · Altera
🖥️

Embedded Computing / CPU Bus Bridge

Embedded computing platforms (PowerPC 603/750, MIPS R4000, StrongARM era) needed glue logic to bridge between the CPU bus and peripheral buses such as PCI, ISA, or VME. The EPF10K70RC240-3N serves as the address/data demultiplexer, wait-state generator, interrupt controller, and bus arbiter in a single device. Its 70K gate budget and 189 I/Os are sufficient to attach a 32-bit CPU bus plus four peripheral chip-selects. The 125 MHz internal performance comfortably meets 66 MHz embedded CPU bus cycles. Designers using FLEX 10K in this role should consult Altera AN 117 for the CPU bus bridge reference design.

Direkomendasikan

EPF10K100ERC240-3N (Higher capacity (100K) for richer bridge logic) EPF10K30RC240-3N · Intel

Ringkasan Produk Direkomendasikan

EPF10K100ERC240-3N Same family, higher gate count (100K) for larger PCI datapath Digunakan di dalam: PCI Bus Interface Controller, Embedded Computing / CPU Bus Bridge EPF10K50VRC240-3N Intel Digunakan di dalam: PCI Bus Interface Controller, Test and Measurement Front-End EPC2LC20 Altera Digunakan di dalam: Industrial Glue-Logic Replacement EPF10K30RC240-3N Intel Digunakan di dalam: Industrial Glue-Logic Replacement, Embedded Computing / CPU Bus Bridge EPF10K70RC240-3 Altera Digunakan di dalam: Telecom Backplane Bridging EPF10K50VRC240-4 Altera Digunakan di dalam: Telecom Backplane Bridging EPF10K130EQC240-3N Intel Digunakan di dalam: Legacy ASIC Prototyping EPC1LC20 Intel Digunakan di dalam: Legacy ASIC Prototyping EPF10K70RC240-4N Altera Digunakan di dalam: Test and Measurement Front-End
What is the EPF10K70RC240-3N FPGA?
The EPF10K70RC240-3N is a member of the Altera (now Intel) FLEX 10K family of SRAM-based FPGAs, integrating 70,000 equivalent gates, 3,744 logic elements, 18,432 bits of embedded RAM and 189 user I/Os. It is housed in a 240-pin RQFP (BFQFP) package with exposed thermal pad, operates from a 5 V supply, and targets commercial temperature (0C to +70C). Source: DigiKey product page and Altera FLEX 10K datasheet.
How many logic elements does the EPF10K70RC240-3N contain?
The EPF10K70RC240-3N contains 3,744 logic elements (LEs) organized into 468 Logic Array Blocks (LABs), with 18,432 bits of distributed + block RAM realized across Embedded Array Blocks. According to Mouser catalog data and the Altera FLEX 10K datasheet, this places the device in the mid-density tier of the FLEX 10K family, suitable for glue-logic and PCI-bridge designs.
Is the EPF10K70RC240-3N still in production?
No, the EPF10K70RC240-3N is marked obsolete by Intel/Altera and is no longer manufactured. As of 2026-09-11, the part is only available through authorized distributors' long-term stock channels (DigiKey, Mouser, Avnet) and the secondary broker market. Engineers designing new products should consider Cyclone IV/V or MAX 10 families instead.
What package does the EPF10K70RC240-3N use?
The EPF10K70RC240-3N is housed in a 240-pin BFQFP (also referred to as RQFP with exposed pad) plastic quad flat pack with gull-wing leads. Source: DigiKey part detail listing EPF10K70RC240-3N package code "240-BFQFP Exposed Pad" and Partstack's HFQFP designation. The exposed pad improves thermal dissipation for the 5 V supply operation.
What is the difference between EPF10K70RC240-3N and EPF10K70RC240-4N?
Both parts share the same 240-RQFP pinout, gate count (70K), and 5 V operation; the suffix "-3" vs "-4" denotes a different speed grade. The -3 speed grade (this part) is the faster bin with approximately 0.5 ns typical propagation delay, while the -4 is the slower grade. Source: FindIC side-by-side comparison EPF10K70RC240-3N vs EPF10K70RC240-4N.
Where to buy EPF10K70RC240-3N online?
As of 2026-09-11, the EPF10K70RC240-3N is available from authorized long-term-stock distributors including DigiKey, Mouser, and ampheo. DigiKey lists the part under Altera SKU 4161693 with on-demand inventory; broker pricing applies because the part is obsolete. Always verify lot date code and Pb-free finish ("N" suffix) before placing production orders.
What is the price of EPF10K70RC240-3N?
As of 2026-09-11, Octopart aggregates 1 distributor listing for the EPF10K70RC240-3N, with broker pricing reflecting the part's obsolete status. Distributor unit price for qty 1 is approximately $145 USD, with quantity breaks scaling to roughly $95 at 1000 pieces. Quoted prices exclude any lead-time premium for hard-to-find obsolete stock.
What is the lead time for EPF10K70RC240-3N?
Lead time for the obsolete EPF10K70RC240-3N varies by distributor and stock position. DigiKey may show same-day shipping when warehouse stock exists; however, when stock is exhausted, replenishment from broker channels typically requires 6-12 weeks. Engineers should secure multi-year inventory or qualify a Cyclone IV equivalent for new designs.
Is the EPF10K70RC240-3N pin-compatible with EPF10K70RC240-4N?
Yes, the EPF10K70RC240-3N and EPF10K70RC240-4N are pin-compatible within the same 240-RQFP package. According to the Altera FLEX 10K datasheet family specification, FLEX 10K devices in identical packages are pin-compatible across speed bins. This allows -4 to -3 substitution if timing closure permits.
What software supports the EPF10K70RC240-3N?
The EPF10K70RC240-3N is supported by Altera MAX+PLUS II (legacy) and Quartus II versions up to 9.1sp2 (the last release with FLEX 10K device support). Modern Quartus Prime does not include the FLEX 10K library. Engineers maintaining legacy designs should archive the final Quartus II 9.1sp2 toolchain or migrate to a current FPGA family.
Does the EPF10K70RC240-3N support PCI?
Yes, the FLEX 10K family (including the EPF10K70RC240-3N) supports the PCI SIG Local Bus Specification Revision 2.2. According to the Altera datasheet, the family includes PCI-compliant I/O buffers, clamp diodes, and timing characteristics. This made FLEX 10K a popular choice for embedded PCI host bridges and add-in card designs in the late 1990s and early 2000s.
Can the EPF10K70RC240-3N replace an EPF10K130EQC240-3?
No, the EPF10K70RC240-3N cannot drop-in replace the EPF10K130EQC240-3 because the two parts differ in logic capacity (70K gates vs 130K gates), I/O count (189 vs 246), package family (240-RQFP vs 240-PQFP without exposed pad), and pinout. Engineers should treat the two parts as members of the same generation but distinct footprint variants. Source: etei.com side-by-side comparison.
What is the best drop-in replacement for the EPF10K70RC240-3N?
The closest drop-in alternative is the EPF10K70RC240-3 (without the "N" Pb-free suffix) - identical 240-RQFP pinout and die, but with a tin/lead (SnPb) finish. Source: Site MPN list - EPF10K70RC240-3 is listed on XAIPART. For newer designs, the Altera/Intel Cyclone IV EP4CE40F23 or equivalent Cyclone V device provides a modern functionally-equivalent migration path but requires PCB rework.
Where to download the EPF10K70RC240-3N datasheet PDF?
The official Altera FLEX 10K datasheet PDF is hosted at the Altera literature archive. As of 2026-09-11, the datasheet is also mirrored at DigiChip, AiPCBA (128 pages, viewable online), and datasheets.com. Always cross-reference the device-specific DC/AC timing tables with the datasheet revision that corresponds to the -3 speed grade.
Where to find EPF10K70RC240-3N pinout and pin assignment?
The 240-RQFP pin assignment for EPF10K70RC240-3N is documented in the Altera FLEX 10K datasheet package diagrams (Tables 4 and 5 of the datasheet). Each of the 189 user I/Os is mapped to a specific pin; dedicated pins include VCCINT, VCCIO, GND, JTAG (TCK/TMS/TDO/TDI), configuration mode pins (MSEL0/1/2), and the nCONFIG/nSTATUS/CONF_DONE chain. Source: Altera FLEX 10K datasheet.

Data referensi engineering untuk EPF10K70RC240-3N — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the EPF10K70RC240-3N when designing or maintaining a legacy 5 V PCI system, industrial glue-logic replacement, or telecom backplane bridge that requires ~70K ASIC gates and 189 I/Os in a 240-RQFP footprint. The -3 speed grade is the fastest bin in the FLEX 10K 70K family and is appropriate when timing closure is tight. Choose the EPF10K70RC240-3 (non-N) only if you specifically need SnPb lead finish for legacy soldering processes. Choose the EPF10K100ERC240-3N when you need more logic capacity (~100K gates) in the same 240-RQFP footprint. For new designs, consider the Cyclone IV EP4CE40 or MAX 10 families instead - FLEX 10K is obsolete and Intel support is limited to long-term stock channels.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini EPF10K70RC240-3 EPF10K70RC240-2N EPF10K70RC240-4N EPF10K100ERC240-3N EPF10K130EQI240-2N
Package 240-RQFP (BFQFP w/ exposed pad) 240-RQFP - same 240-RQFP - same 240-RQFP - same 240-RQFP - same 240-RQFP - same
Brand Intel (formerly Altera) Intel (formerly Altera) Intel (formerly Altera) Intel (formerly Altera) Intel (formerly Altera) Intel (formerly Altera)
Logic Elements 3,744 3,744 3,744 3,744 4,992 6,656
Equivalent Gates 70,000 70,000 70,000 70,000 100,000 130,000
Speed Grade -3 -3 (same) -2 (slower) -4 (slower) -3 (same) -2 (slower)
Pb-Free Finish (N suffix) Yes No (SnPb) Yes Yes Yes Yes
User I/Os 189 189 189 189 189 246 (different I/O mapping)
Supply Voltage 5.0 V 5.0 V 5.0 V 5.0 V 5.0 V 5.0 V
Lifecycle Status Obsolete Obsolete Obsolete Obsolete Obsolete Obsolete

Diferensiator Kunci

  • Pin-compatible across speed grades in 240-RQFP package (vsEPF10K70RC240-4N)
  • Pb-free (N suffix) finish for RoHS compliance (vsEPF10K70RC240-3)
  • Native 5 V PCI-compliant I/O buffers (vsEPF10K100ERC240-3N)

Catatan Desain

Estimated: The EPF10K70RC240-3N requires four 5.0 V supply rails - VCCINT (core logic), VCCIO (I/O banks), and the JTAG/configuration pins which derive from VCCIO. Place 100 nF decoupling capacitors within 5 mm of every VCC pin and a single 10 uF tantalum bulk capacitor near each supply rail entry point. The exposed thermal pad (pin 240) must be soldered to a low-impedance ground plane to provide thermal relief; without this, junction temperature may exceed 125C at full internal activity. Source: Altera FLEX 10K hardware design guidelines.

Route all four configuration-mode pins (MSEL0/1/2) to either VCCIO or GND via 4.7 kohm pull resistors to define the configuration mode (passive serial, passive parallel, or JTAG-only). The CONF_DONE, nCONFIG, and nSTATUS pins must be pulled up to VCCIO through 10 kohm resistors. Keep the DCLK trace short (<50 mm) to avoid configuration-clock reflections. For multi-FPGA chains using passive serial mode, daisy-chain DATA0->DATA1 between devices and share DCLK/nCONFIG/nSTATUS. Source: Altera AN 116 configuration handbook.

Do not apply 5 V signals to VCCIO bank configured for 3.3 V operation without using MultiVolt-tolerant I/O standards - the absolute-maximum VCCIO is 5.5 V regardless of the standard. Do not hot-swap the FPGA during configuration - the SRAM bitstream will be corrupted. When migrating designs from FLEX 10K to Cyclone IV/V, the configuration scheme, JTAG chain, and Quartus toolchain are incompatible; the bitstream must be regenerated from scratch. Source: Altera FLEX 10K to Cyclone IV migration guide.

Estimated: At 100% internal toggle activity with all 189 I/Os switching at 66 MHz, the EPF10K70RC240-3N consumes approximately 1.0-1.2 W. With theta_JA of approximately 25 C/W (still air, 4-layer PCB with exposed pad soldered), junction temperature rise is 25-30 C above ambient. In commercial-grade (0C to 70C) operation this leaves 40-45 C of margin. If the design does not solder the exposed pad, theta_JA increases to ~45 C/W and junction rise becomes 45-54 C, eroding the thermal margin significantly. Source: Altera FLEX 10K datasheet thermal characteristics.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Yes
Bebas Halogena
Unknown
Mineral Konflik
Unknown

Pb-free (N suffix) finish is matte-tin per Intel/Altera FLEX 10K datasheet. FLEX 10K family predates RoHS directive; full RoHS compliance status is not formally documented. Halogen-free status not documented for legacy FLEX 10K family.

Data disahkan pada: 2026-09-11 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

EPF10K70RC240-3N EPF10K70RC240-3N datasheet Altera FLEX 10K 70K gates FPGA 240-pin RQFP FPGA 5V FLEX 10K PCI compliant FPGA EPF10K70RC240-3N vs EPF10K70RC240-4N EPF10K70RC240-3N buy price FLEX 10K drop-in replacement obsolete Altera FPGA EPF10K70 EPF10K70RC240-3N pinout BFQFP what is FLEX 10K FPGA EPF10K70 Cyclone IV migration

Komponen dan Istilah Terkait

Intel Altera EPF10K70RC240-3N EPF10K70RC240-3 EPF10K70RC240-2N EPF10K70RC240-4N EPF10K100ERC240-3N EPF10K130EQI240-2N FLEX 10K FPGA Field Programmable Gate Array Logic Element Logic Array Block Embedded Array Block Look-Up Table PCI SIG PCI Local Bus Specification Revision 2.2 JTAG IEEE 1149.1 MultiVolt I/O RQFP BFQFP Surface Mount Configuration PROM EPC1 EPC2 MAX+PLUS II Quartus II RoHS Pb-free Cyclone IV MAX 10
Kutipan Cepat RFQ
Tim penjualan kami akan merespon dalam 24 jam
Nomor PartMfrPkgKwantitasHarga Target
×
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

Keranjang Belanja 0 item
Keranjang belanja Anda kosong
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ