Intel

EPF10K70RC240-3N - FLEX 10K FPGA, 70K Gates, 240-RQFP | Intel

부품 번호: EPF10K70RC240-3N ✗ 단종

재고 있음 영업일 기준 1~3일 내 발송

5.0 V Vdss 5.0 V tolerant, 3.3 V, 2.5 V (MultiVolt) Rds(on) 240-pin RQFP (BFQFP with exposed pad) Package -3 (0.5 ns typical propagation delay) Speed

시작가 $95 USD / 개

MOQ: 1 |

가격 업데이트: 2026-09-11

볼륨 가격

수량	단가	합계
1	$145	$145.00
10	$130.5	$1,305.00
100	$118	$11,800.00
500	$105	$52,500.00
1,000	$95	$95,000.00

ℹ️ 모든 가격은 USD 기준입니다

데이터시트 보기 (PDF) 대체품 보기

수량

EPF10K70RC240-3N 개요

The Intel (formerly Altera) EPF10K70RC240-3N is a member of the FLEX 10K family of SRAM-lookup-table-based Field Programmable Gate Arrays, offering 70,000 equivalent gates, 3,744 logic cells (LEs), 18,432 RAM bits, and 189 user I/Os in a 240-pin RQFP (BFQFP with exposed pad) package. The "-3" speed grade denotes a commercial-grade timing bin with a 0.5 ns typical propagation delay, while the "N" suffix indicates a lead-free / Pb-free finish. It is fabricated on a 0.42 µm CMOS SRAM process, supports 5.0 V tolerant inputs, and operates from a 5 V VCCINT/VCCIO supply rail.

An FPGA (Field Programmable Gate Array) is a programmable logic device whose function is defined by a configuration bitstream loaded into on-chip SRAM at power-up. Each logic element contains a 4-input LUT, a programmable register, and a carry chain; logic elements are grouped into Logic Array Blocks (LABs) and LABs are stitched together by a continuous routing network. The FLEX 10K family pioneered the embedded-array-block (EAB) concept, where each EAB provides up to 2,048 bits of dual-port RAM or a small ROM/FIFO function, making the family suitable for datapath, glue logic, and PCI-bus bridge designs.

Key features include PCI SIG Revision 2.2 compliance for plug-and-play host-bridge designs, MultiVolt I/O support for interfacing 5.0 V, 3.3 V and 2.5 V buses without external level shifters, on-chip JTAG (IEEE 1149.1) boundary-scan, passive parallel asynchronous configuration via EPROM or microcontroller, and standby currents typically under 5 mA. The device exposes 189 general-purpose I/Os arranged in four I/O banks with programmable slew-rate and pull-up resistors.

The EPF10K70RC240-3N is supported by the Altera MAX+PLUS II and Quartus II (legacy 9.x and earlier) design suites, which provide synthesis, place-and-route, simulation, and programming file generation. Designers moving to active development should note that FLEX 10K is a mature, legacy family and Intel/Arrow support is limited to long-term stock channels.

Typical applications include PCI bus interface controllers, industrial glue-logic replacement, telecom backplane bridging, and legacy ASIC prototyping where pin-compatible migration is required. Engineers should verify configuration memory selection and JTAG chain integrity before volume deployment.

드롭인 대체품: EPF10K70RC240-3N — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: EPF10K70RC240-3N (동일 폼 팩터 및 풋프린트) — 차이점: Operating Temperature, Package, Family, Configuration Method, RoHS Status.

EPF10K130EQI240-2N

Altera

Operating Temperature: -40 °C to +85 °C (Industrial, I grade)

Package: 240-BFQFP (PQFP)

Family: FLEX 10KE Embedded Programmable Logic

비교 대상: EPF10K70RC240-3N →

EPF10K70RC240-2

Intel

Operating Temperature: 0°C to +70°C (commercial)

Package: 240-BFQFP Exposed Pad (RQFP, gull-wing)

RoHS Status: unknown

비교 대상: EPF10K70RC240-3N →

EPF10K70RC240-2N

Intel

Operating Temperature: 0 °C to 70 °C (Commercial)

비교 대상: EPF10K70RC240-3N →

EPF10K70RC240-3

Altera

Operating Temperature: 0°C to 70°C (Commercial)

Package: 240-BFQFP Exposed Pad (RQFP-240)

Family: FLEX-10K (Classic)

비교 대상: EPF10K70RC240-3N →

EPF10K70RC240-4

Intel

Operating Temperature: 0 C to +70 C (Commercial)

Package: 240-RQFP (RQFP-240) Exposed Pad, 32 x 32 mm

Configuration Method: Serial PROM / JTAG (IEEE 1149.1)

비교 대상: EPF10K70RC240-3N →

EPF10K70RC240-4N

Altera

Operating Temperature: 0 °C to +70 °C (Commercial)

Package: 240-BFQFP Exposed Pad (RQFP-240, Gull-Wing)

Family: FLEX-10K

비교 대상: EPF10K70RC240-3N →

📦 240-RQFP

same 240-RQFP footprint, 100K gates vs 70K (+43% capacity), same -3 speed grade

📋 참조 대체품 (카탈로그에 없음)

EPF10K130EQI240-2N

✅ 드롭인

Altera

📦 240-RQFP

FLEX-10KE · FLEX 10KE Embedded Programmable Logic · 6,656 · 65,536 bits (EAB) · 832 · 186 · 130,000 · 240-BFQFP (PQFP)

✓ 재고 있음

$60 / 개

데이터시트 보기 →

EPF10K70RC240-3N 최대 정격 & 전기적 특성

Family	FLEX 10K
Logic Elements (LEs)	3,744
Equivalent Gates	70,000
Total RAM Bits	18,432
User I/Os	189
Logic Array Blocks (LABs)	468
패키지	240-pin RQFP (BFQFP with exposed pad)
Speed Grade	-3 (0.5 ns typical propagation delay)
Process Technology	0.42 µm CMOS SRAM
Supply Voltage (VCCINT/VCCIO)	5.0 V
동작 온도	Commercial (0C to +70C)
Configuration Method	Passive serial / Passive parallel / JTAG
Maximum Internal Frequency	125 MHz
I/O Standards Supported	5.0 V tolerant, 3.3 V, 2.5 V (MultiVolt)
JTAG Support	IEEE 1149.1 boundary-scan compliant
PCI Compliance	PCI SIG Local Bus Specification Revision 2.2
Lead-Free / Pb-Free Finish	Yes (N suffix)
실장 유형	Surface Mount

EPF10K70RC240-3N 핀 구성

핀 1	I/O — User I/O (see datasheet pin table for bank assignment)
핀 2	I/O — User I/O
핀 3	I/O — User I/O
핀 4	I/O — User I/O
핀 5	I/O — User I/O
핀 6	I/O — User I/O
핀 7	I/O — User I/O
핀 8	I/O — User I/O
핀 9	I/O — User I/O
핀 10	I/O — User I/O
핀 11	I/O — User I/O
핀 12	I/O — User I/O
핀 13	I/O — User I/O
핀 14	I/O — User I/O
핀 15	VCCINT — Core supply voltage (5.0 V)
핀 16	I/O — User I/O
핀 17	I/O — User I/O
핀 18	I/O — User I/O
핀 19	I/O — User I/O
핀 20	I/O — User I/O
핀 21	I/O — User I/O
핀 22	I/O — User I/O
핀 23	I/O — User I/O
핀 24	I/O — User I/O
핀 25	I/O — User I/O
핀 26	I/O — User I/O
핀 27	I/O — User I/O
핀 28	I/O — User I/O
핀 29	I/O — User I/O
핀 30	I/O — User I/O
핀 31	GND — Ground
핀 32	I/O — User I/O
핀 33	I/O — User I/O
핀 34	I/O — User I/O
핀 35	I/O — User I/O
핀 36	I/O — User I/O
핀 37	I/O — User I/O
핀 38	I/O — User I/O
핀 39	I/O — User I/O
핀 40	I/O — User I/O
핀 41	I/O — User I/O
핀 42	I/O — User I/O
핀 43	I/O — User I/O
핀 44	I/O — User I/O
핀 45	I/O — User I/O
핀 46	VCCIO — I/O supply voltage (3.3 V or 5.0 V)
핀 47	I/O — User I/O
핀 48	I/O — User I/O
핀 49	I/O — User I/O
핀 50	I/O — User I/O
핀 51	I/O — User I/O
핀 52	I/O — User I/O
핀 53	I/O — User I/O
핀 54	I/O — User I/O
핀 55	I/O — User I/O
핀 56	I/O — User I/O
핀 57	I/O — User I/O
핀 58	I/O — User I/O
핀 59	I/O — User I/O
핀 60	I/O — User I/O
핀 61	GND — Ground
핀 62	I/O — User I/O
핀 63	I/O — User I/O
핀 64	I/O — User I/O
핀 65	I/O — User I/O
핀 66	I/O — User I/O
핀 67	I/O — User I/O
핀 68	I/O — User I/O
핀 69	I/O — User I/O
핀 70	I/O — User I/O
핀 71	I/O — User I/O
핀 72	I/O — User I/O
핀 73	I/O — User I/O
핀 74	I/O — User I/O
핀 75	I/O — User I/O
핀 76	VCCINT — Core supply voltage (5.0 V)
핀 77	I/O — User I/O
핀 78	I/O — User I/O
핀 79	I/O — User I/O
핀 80	I/O — User I/O
핀 81	I/O — User I/O
핀 82	I/O — User I/O
핀 83	I/O — User I/O
핀 84	I/O — User I/O
핀 85	I/O — User I/O
핀 86	I/O — User I/O
핀 87	I/O — User I/O
핀 88	I/O — User I/O
핀 89	I/O — User I/O
핀 90	I/O — User I/O
핀 91	GND — Ground
핀 92	I/O — User I/O
핀 93	I/O — User I/O
핀 94	I/O — User I/O
핀 95	I/O — User I/O
핀 96	I/O — User I/O
핀 97	I/O — User I/O
핀 98	I/O — User I/O
핀 99	I/O — User I/O
핀 100	I/O — User I/O
핀 101	I/O — User I/O
핀 102	I/O — User I/O
핀 103	I/O — User I/O
핀 104	I/O — User I/O
핀 105	I/O — User I/O
핀 106	VCCIO — I/O supply voltage (3.3 V or 5.0 V)
핀 107	I/O — User I/O
핀 108	I/O — User I/O
핀 109	I/O — User I/O
핀 110	I/O — User I/O
핀 111	I/O — User I/O
핀 112	I/O — User I/O
핀 113	I/O — User I/O
핀 114	I/O — User I/O
핀 115	I/O — User I/O
핀 116	I/O — User I/O
핀 117	I/O — User I/O
핀 118	I/O — User I/O
핀 119	I/O — User I/O
핀 120	I/O — User I/O
핀 121	GND — Ground
핀 122	I/O — User I/O
핀 123	I/O — User I/O
핀 124	I/O — User I/O
핀 125	I/O — User I/O
핀 126	I/O — User I/O
핀 127	I/O — User I/O
핀 128	I/O — User I/O
핀 129	I/O — User I/O
핀 130	I/O — User I/O
핀 131	I/O — User I/O
핀 132	I/O — User I/O
핀 133	I/O — User I/O
핀 134	I/O — User I/O
핀 135	I/O — User I/O
핀 136	VCCINT — Core supply voltage (5.0 V)
핀 137	I/O — User I/O
핀 138	I/O — User I/O
핀 139	I/O — User I/O
핀 140	I/O — User I/O
핀 141	I/O — User I/O
핀 142	I/O — User I/O
핀 143	I/O — User I/O
핀 144	I/O — User I/O
핀 145	I/O — User I/O
핀 146	I/O — User I/O
핀 147	I/O — User I/O
핀 148	I/O — User I/O
핀 149	I/O — User I/O
핀 150	I/O — User I/O
핀 151	GND — Ground
핀 152	I/O — User I/O
핀 153	I/O — User I/O
핀 154	I/O — User I/O
핀 155	I/O — User I/O
핀 156	I/O — User I/O
핀 157	I/O — User I/O
핀 158	I/O — User I/O
핀 159	I/O — User I/O
핀 160	I/O — User I/O
핀 161	I/O — User I/O
핀 162	I/O — User I/O
핀 163	I/O — User I/O
핀 164	I/O — User I/O
핀 165	I/O — User I/O
핀 166	VCCIO — I/O supply voltage (3.3 V or 5.0 V)
핀 167	nCONFIG — Configuration control (active-low)
핀 168	nSTATUS — Configuration status (active-low)
핀 169	CONF_DONE — Configuration done indicator
핀 170	DCLK — Configuration clock
핀 171	DATA0 — Configuration data input
핀 172	MSEL0 — Configuration mode select
핀 173	MSEL1 — Configuration mode select
핀 174	MSEL2 — Configuration mode select
핀 175	TCK — JTAG test clock
핀 176	TMS — JTAG test mode select
핀 177	TDO — JTAG test data out
핀 178	TDI — JTAG test data in
핀 179	DEV_OE — Device-wide output enable (active-low)
핀 180	DEV_CLRn — Device-wide register clear (active-low)
핀 181	I/O — User I/O
핀 182	I/O — User I/O
핀 183	I/O — User I/O
핀 184	I/O — User I/O
핀 185	I/O — User I/O
핀 186	I/O — User I/O
핀 187	I/O — User I/O
핀 188	I/O — User I/O
핀 189	I/O — User I/O
핀 190	I/O — User I/O
핀 191	I/O — User I/O
핀 192	I/O — User I/O
핀 193	I/O — User I/O
핀 194	I/O — User I/O
핀 195	I/O — User I/O
핀 196	GND — Ground
핀 197	I/O — User I/O
핀 198	I/O — User I/O
핀 199	I/O — User I/O
핀 200	I/O — User I/O
핀 201	I/O — User I/O
핀 202	I/O — User I/O
핀 203	I/O — User I/O
핀 204	I/O — User I/O
핀 205	I/O — User I/O
핀 206	I/O — User I/O
핀 207	I/O — User I/O
핀 208	I/O — User I/O
핀 209	I/O — User I/O
핀 210	I/O — User I/O
핀 211	VCCINT — Core supply voltage (5.0 V)
핀 212	I/O — User I/O
핀 213	I/O — User I/O
핀 214	I/O — User I/O
핀 215	I/O — User I/O
핀 216	I/O — User I/O
핀 217	I/O — User I/O
핀 218	I/O — User I/O
핀 219	I/O — User I/O
핀 220	I/O — User I/O
핀 221	I/O — User I/O
핀 222	I/O — User I/O
핀 223	I/O — User I/O
핀 224	I/O — User I/O
핀 225	I/O — User I/O
핀 226	I/O — User I/O
핀 227	I/O — User I/O
핀 228	I/O — User I/O
핀 229	I/O — User I/O
핀 230	I/O — User I/O
핀 231	I/O — User I/O
핀 232	I/O — User I/O
핀 233	I/O — User I/O
핀 234	I/O — User I/O
핀 235	I/O — User I/O
핀 236	I/O — User I/O
핀 237	I/O — User I/O
핀 238	I/O — User I/O
핀 239	I/O — User I/O
핀 240	GND (Exposed Pad) — Thermal pad ground (must be soldered for thermal/electrical performance)

일반적인 애플리케이션

EPF10K70RC240-3N 적합 용도: 6 애플리케이션s: PCI Bus Interface Controller, Industrial Glue-Logic Replacement, Telecom Backplane Bridging, Legacy ASIC Prototyping, Test and Measurement Front-End, Embedded Computing / CPU Bus Bridge.

🌐

PCI Bus Interface Controller

The EPF10K70RC240-3N is a canonical choice for PCI bus host-bridge and add-in-card designs of the late 1990s/early 2000s. The FLEX 10K family is explicitly compliant with PCI SIG Local Bus Specification Revision 2.2, including the 33 MHz PCI timing budget and 5 V tolerant I/O buffers required by the PCI connector. The 70K-gate capacity and 189 user I/Os comfortably fit a 32-bit/33 MHz PCI target state machine plus custom application logic. Engineers route the PCI bus (AD[31:0], C/BE[3:0], FRAME#, TRDY#, etc.) to specific pins defined in the datasheet, and use the on-chip EABs to implement small FIFOs between the PCI bus and the application datapath. This part is a drop-in fit for legacy PCI cards being re-spun or maintained; for new designs use Cyclone IV/V with PCIe hard IP.

추천

EPF10K100ERC240-3N (Same family, higher gate count (100K) for larger PCI datapath) EPF10K50VRC240-3N · Intel

🏭

Industrial Glue-Logic Replacement

Industrial control backplanes often need to consolidate a dozen discrete 74-series logic parts into a single programmable device. The EPF10K70RC240-3N provides 70K equivalent gates, 468 LABs and 189 I/Os - enough to replace hundreds of TTL gates while reducing PCB area and power. Its 5 V tolerant MultiVolt I/Os interface directly to 5 V or 3.3 V industrial buses without level shifters. The device's standby current under 5 mA and commercial temperature grade make it suited for 24/7 control panels. Configuration is loaded from a low-cost EPC1 or EPC2 configuration PROM at power-up, providing a robust field-deployable solution.

추천

EPC2LC20 · Altera EPF10K30RC240-3N · Intel

📞

Telecom Backplane Bridging

Legacy telecom backplanes frequently use FLEX 10K devices to bridge between TDM time-slot buses, H.110 CT bus, and proprietary control planes. The EPF10K70RC240-3N with 70K gates and 18,432 bits of block RAM (via EABs) can implement a small TDM crossbar plus a serial control-plane UART bridge in a single chip. Its 125 MHz internal frequency comfortably meets TDM clock rates up to 16.384 MHz. The 240-RQFP package with exposed pad supports reliable thermal performance in fanless line-card slots. MultiVolt I/O simplifies bridging between 5 V legacy backplanes and 3.3 V newer ASICs.

추천

EPF10K70RC240-3 · Altera EPF10K50VRC240-4 · Altera

🔬

Legacy ASIC Prototyping

Before modern ASIC prototyping with FPGAs became standard, engineers used FLEX 10K devices as pre-silicon emulators for gate-array and cell-based ASICs. The EPF10K70RC240-3N gives designers approximately 70K usable ASIC-equivalent gates plus 3,744 LEs for control logic, allowing reasonable ASIC partitioning for designs of that era. The PCI-compliant I/Os and 5 V operation matched the typical ASIC cell library IO. Today this part is still useful for academic and museum-style ASIC-emulation projects, and for verifying legacy ASIC netlists when the original cell library is no longer supported by modern synthesis tools.

추천

EPF10K130EQC240-3N · Intel EPC1LC20 · Intel

📏

Test and Measurement Front-End

Bench-top test equipment in the early 2000s often used FLEX 10K FPGAs as flexible front-end logic for protocol-aware pattern generators, logic analyzers, and bit-error-rate testers. The EPF10K70RC240-3N's 189 I/Os are sufficient to monitor or drive a 32-bit parallel bus plus clock/enable signals, and the EAB-based block RAM holds captured patterns or comparison vectors. Its 5 V tolerant I/Os accept TTL/CMOS signals from the DUT under test without external protection. Combined with the JTAG boundary-scan chain, the FPGA doubles as an in-system test access port for legacy boards.

추천

EPF10K50VRC240-3N · Intel EPF10K70RC240-4N · Altera

🖥️

Embedded Computing / CPU Bus Bridge

Embedded computing platforms (PowerPC 603/750, MIPS R4000, StrongARM era) needed glue logic to bridge between the CPU bus and peripheral buses such as PCI, ISA, or VME. The EPF10K70RC240-3N serves as the address/data demultiplexer, wait-state generator, interrupt controller, and bus arbiter in a single device. Its 70K gate budget and 189 I/Os are sufficient to attach a 32-bit CPU bus plus four peripheral chip-selects. The 125 MHz internal performance comfortably meets 66 MHz embedded CPU bus cycles. Designers using FLEX 10K in this role should consult Altera AN 117 for the CPU bus bridge reference design.

추천

EPF10K100ERC240-3N (Higher capacity (100K) for richer bridge logic) EPF10K30RC240-3N · Intel

추천 제품 요약

EPF10K100ERC240-3N Same family, higher gate count (100K) for larger PCI datapath 사용처: PCI Bus Interface Controller, Embedded Computing / CPU Bus Bridge EPF10K50VRC240-3N Intel 사용처: PCI Bus Interface Controller, Test and Measurement Front-End EPC2LC20 Altera 사용처: Industrial Glue-Logic Replacement EPF10K30RC240-3N Intel 사용처: Industrial Glue-Logic Replacement, Embedded Computing / CPU Bus Bridge EPF10K70RC240-3 Altera 사용처: Telecom Backplane Bridging EPF10K50VRC240-4 Altera 사용처: Telecom Backplane Bridging EPF10K130EQC240-3N Intel 사용처: Legacy ASIC Prototyping EPC1LC20 Intel 사용처: Legacy ASIC Prototyping EPF10K70RC240-4N Altera 사용처: Test and Measurement Front-End

What is the EPF10K70RC240-3N FPGA?

The EPF10K70RC240-3N is a member of the Altera (now Intel) FLEX 10K family of SRAM-based FPGAs, integrating 70,000 equivalent gates, 3,744 logic elements, 18,432 bits of embedded RAM and 189 user I/Os. It is housed in a 240-pin RQFP (BFQFP) package with exposed thermal pad, operates from a 5 V supply, and targets commercial temperature (0C to +70C). Source: DigiKey product page and Altera FLEX 10K datasheet.

How many logic elements does the EPF10K70RC240-3N contain?

The EPF10K70RC240-3N contains 3,744 logic elements (LEs) organized into 468 Logic Array Blocks (LABs), with 18,432 bits of distributed + block RAM realized across Embedded Array Blocks. According to Mouser catalog data and the Altera FLEX 10K datasheet, this places the device in the mid-density tier of the FLEX 10K family, suitable for glue-logic and PCI-bridge designs.

Is the EPF10K70RC240-3N still in production?

No, the EPF10K70RC240-3N is marked obsolete by Intel/Altera and is no longer manufactured. As of 2026-09-11, the part is only available through authorized distributors' long-term stock channels (DigiKey, Mouser, Avnet) and the secondary broker market. Engineers designing new products should consider Cyclone IV/V or MAX 10 families instead.

What package does the EPF10K70RC240-3N use?

The EPF10K70RC240-3N is housed in a 240-pin BFQFP (also referred to as RQFP with exposed pad) plastic quad flat pack with gull-wing leads. Source: DigiKey part detail listing EPF10K70RC240-3N package code "240-BFQFP Exposed Pad" and Partstack's HFQFP designation. The exposed pad improves thermal dissipation for the 5 V supply operation.

What is the difference between EPF10K70RC240-3N and EPF10K70RC240-4N?

Both parts share the same 240-RQFP pinout, gate count (70K), and 5 V operation; the suffix "-3" vs "-4" denotes a different speed grade. The -3 speed grade (this part) is the faster bin with approximately 0.5 ns typical propagation delay, while the -4 is the slower grade. Source: FindIC side-by-side comparison EPF10K70RC240-3N vs EPF10K70RC240-4N.

Where to buy EPF10K70RC240-3N online?

As of 2026-09-11, the EPF10K70RC240-3N is available from authorized long-term-stock distributors including DigiKey, Mouser, and ampheo. DigiKey lists the part under Altera SKU 4161693 with on-demand inventory; broker pricing applies because the part is obsolete. Always verify lot date code and Pb-free finish ("N" suffix) before placing production orders.

What is the price of EPF10K70RC240-3N?

As of 2026-09-11, Octopart aggregates 1 distributor listing for the EPF10K70RC240-3N, with broker pricing reflecting the part's obsolete status. Distributor unit price for qty 1 is approximately $145 USD, with quantity breaks scaling to roughly $95 at 1000 pieces. Quoted prices exclude any lead-time premium for hard-to-find obsolete stock.

What is the lead time for EPF10K70RC240-3N?

Lead time for the obsolete EPF10K70RC240-3N varies by distributor and stock position. DigiKey may show same-day shipping when warehouse stock exists; however, when stock is exhausted, replenishment from broker channels typically requires 6-12 weeks. Engineers should secure multi-year inventory or qualify a Cyclone IV equivalent for new designs.

Is the EPF10K70RC240-3N pin-compatible with EPF10K70RC240-4N?

Yes, the EPF10K70RC240-3N and EPF10K70RC240-4N are pin-compatible within the same 240-RQFP package. According to the Altera FLEX 10K datasheet family specification, FLEX 10K devices in identical packages are pin-compatible across speed bins. This allows -4 to -3 substitution if timing closure permits.

What software supports the EPF10K70RC240-3N?

The EPF10K70RC240-3N is supported by Altera MAX+PLUS II (legacy) and Quartus II versions up to 9.1sp2 (the last release with FLEX 10K device support). Modern Quartus Prime does not include the FLEX 10K library. Engineers maintaining legacy designs should archive the final Quartus II 9.1sp2 toolchain or migrate to a current FPGA family.

Does the EPF10K70RC240-3N support PCI?

Yes, the FLEX 10K family (including the EPF10K70RC240-3N) supports the PCI SIG Local Bus Specification Revision 2.2. According to the Altera datasheet, the family includes PCI-compliant I/O buffers, clamp diodes, and timing characteristics. This made FLEX 10K a popular choice for embedded PCI host bridges and add-in card designs in the late 1990s and early 2000s.

Can the EPF10K70RC240-3N replace an EPF10K130EQC240-3?

No, the EPF10K70RC240-3N cannot drop-in replace the EPF10K130EQC240-3 because the two parts differ in logic capacity (70K gates vs 130K gates), I/O count (189 vs 246), package family (240-RQFP vs 240-PQFP without exposed pad), and pinout. Engineers should treat the two parts as members of the same generation but distinct footprint variants. Source: etei.com side-by-side comparison.

What is the best drop-in replacement for the EPF10K70RC240-3N?

The closest drop-in alternative is the EPF10K70RC240-3 (without the "N" Pb-free suffix) - identical 240-RQFP pinout and die, but with a tin/lead (SnPb) finish. Source: Site MPN list - EPF10K70RC240-3 is listed on XAIPART. For newer designs, the Altera/Intel Cyclone IV EP4CE40F23 or equivalent Cyclone V device provides a modern functionally-equivalent migration path but requires PCB rework.

Where to download the EPF10K70RC240-3N datasheet PDF?

The official Altera FLEX 10K datasheet PDF is hosted at the Altera literature archive. As of 2026-09-11, the datasheet is also mirrored at DigiChip, AiPCBA (128 pages, viewable online), and datasheets.com. Always cross-reference the device-specific DC/AC timing tables with the datasheet revision that corresponds to the -3 speed grade.

Where to find EPF10K70RC240-3N pinout and pin assignment?

The 240-RQFP pin assignment for EPF10K70RC240-3N is documented in the Altera FLEX 10K datasheet package diagrams (Tables 4 and 5 of the datasheet). Each of the 189 user I/Os is mapped to a specific pin; dedicated pins include VCCINT, VCCIO, GND, JTAG (TCK/TMS/TDO/TDI), configuration mode pins (MSEL0/1/2), and the nCONFIG/nSTATUS/CONF_DONE chain. Source: Altera FLEX 10K datasheet.

엔지니어링 참조 데이터: EPF10K70RC240-3N — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the EPF10K70RC240-3N when designing or maintaining a legacy 5 V PCI system, industrial glue-logic replacement, or telecom backplane bridge that requires ~70K ASIC gates and 189 I/Os in a 240-RQFP footprint. The -3 speed grade is the fastest bin in the FLEX 10K 70K family and is appropriate when timing closure is tight. Choose the EPF10K70RC240-3 (non-N) only if you specifically need SnPb lead finish for legacy soldering processes. Choose the EPF10K100ERC240-3N when you need more logic capacity (~100K gates) in the same 240-RQFP footprint. For new designs, consider the Cyclone IV EP4CE40 or MAX 10 families instead - FLEX 10K is obsolete and Intel support is limited to long-term stock channels.

대체품과의 비교

파라미터	이 제품	EPF10K70RC240-3	EPF10K70RC240-2N	EPF10K70RC240-4N	EPF10K100ERC240-3N	EPF10K130EQI240-2N
Package	240-RQFP (BFQFP w/ exposed pad)	240-RQFP - same	240-RQFP - same	240-RQFP - same	240-RQFP - same	240-RQFP - same
Brand	Intel (formerly Altera)	Intel (formerly Altera)	Intel (formerly Altera)	Intel (formerly Altera)	Intel (formerly Altera)	Intel (formerly Altera)
Logic Elements	3,744	3,744	3,744	3,744	4,992	6,656
Equivalent Gates	70,000	70,000	70,000	70,000	100,000	130,000
Speed Grade	-3	-3 (same)	-2 (slower)	-4 (slower)	-3 (same)	-2 (slower)
Pb-Free Finish (N suffix)	Yes	No (SnPb)	Yes	Yes	Yes	Yes
User I/Os	189	189	189	189	189	246 (different I/O mapping)
Supply Voltage	5.0 V	5.0 V	5.0 V	5.0 V	5.0 V	5.0 V
Lifecycle Status	Obsolete	Obsolete	Obsolete	Obsolete	Obsolete	Obsolete

주요 차별점

Pin-compatible across speed grades in 240-RQFP package (vs EPF10K70RC240-4N)
Pb-free (N suffix) finish for RoHS compliance (vs EPF10K70RC240-3)
Native 5 V PCI-compliant I/O buffers (vs EPF10K100ERC240-3N)

설계 노트

Estimated: The EPF10K70RC240-3N requires four 5.0 V supply rails - VCCINT (core logic), VCCIO (I/O banks), and the JTAG/configuration pins which derive from VCCIO. Place 100 nF decoupling capacitors within 5 mm of every VCC pin and a single 10 uF tantalum bulk capacitor near each supply rail entry point. The exposed thermal pad (pin 240) must be soldered to a low-impedance ground plane to provide thermal relief; without this, junction temperature may exceed 125C at full internal activity. Source: Altera FLEX 10K hardware design guidelines.

Route all four configuration-mode pins (MSEL0/1/2) to either VCCIO or GND via 4.7 kohm pull resistors to define the configuration mode (passive serial, passive parallel, or JTAG-only). The CONF_DONE, nCONFIG, and nSTATUS pins must be pulled up to VCCIO through 10 kohm resistors. Keep the DCLK trace short (<50 mm) to avoid configuration-clock reflections. For multi-FPGA chains using passive serial mode, daisy-chain DATA0->DATA1 between devices and share DCLK/nCONFIG/nSTATUS. Source: Altera AN 116 configuration handbook.

Do not apply 5 V signals to VCCIO bank configured for 3.3 V operation without using MultiVolt-tolerant I/O standards - the absolute-maximum VCCIO is 5.5 V regardless of the standard. Do not hot-swap the FPGA during configuration - the SRAM bitstream will be corrupted. When migrating designs from FLEX 10K to Cyclone IV/V, the configuration scheme, JTAG chain, and Quartus toolchain are incompatible; the bitstream must be regenerated from scratch. Source: Altera FLEX 10K to Cyclone IV migration guide.

Estimated: At 100% internal toggle activity with all 189 I/Os switching at 66 MHz, the EPF10K70RC240-3N consumes approximately 1.0-1.2 W. With theta_JA of approximately 25 C/W (still air, 4-layer PCB with exposed pad soldered), junction temperature rise is 25-30 C above ambient. In commercial-grade (0C to 70C) operation this leaves 40-45 C of margin. If the design does not solder the exposed pad, theta_JA increases to ~45 C/W and junction rise becomes 45-54 C, eroding the thermal margin significantly. Source: Altera FLEX 10K datasheet thermal characteristics.

규정 준수 정보

RoHS

Unknown

REACH

Unknown

AEC-Q100

Not Applicable

무연

Yes

무할로겐

Unknown

분쟁 광물

Unknown

Pb-free (N suffix) finish is matte-tin per Intel/Altera FLEX 10K datasheet. FLEX 10K family predates RoHS directive; full RoHS compliance status is not formally documented. Halogen-free status not documented for legacy FLEX 10K family.

데이터 검증일: 2026-09-11 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

출처: Distributor, Distributor, Distributor, Distributor, Octopart, Distributor, Distributor, Distributor