EPF10K70RC240-3N - FLEX 10K FPGA, 70K Gates, 240-RQFP | Intel EPF10K70RC240-3N bởi Intel - thành phần điện tử
Intel

EPF10K70RC240-3N - FLEX 10K FPGA, 70K Gates, 240-RQFP | Intel

MPN: EPF10K70RC240-3N ✗ Cuối đời
5.0 V Vdss 5.0 V tolerant, 3.3 V, 2.5 V (MultiVolt) Rds(on) 240-pin RQFP (BFQFP with exposed pad) Package -3 (0.5 ns typical propagation delay) Speed
Yêu cầu báo giá
MOQ: 1 |
Xem tài liệu kỹ thuật (PDF) Xem các bộ thay thế

EPF10K70RC240-3N Tóm tắt

The Intel (formerly Altera) EPF10K70RC240-3N is a member of the FLEX 10K family of SRAM-lookup-table-based Field Programmable Gate Arrays, offering 70,000 equivalent gates, 3,744 logic cells (LEs), 18,432 RAM bits, and 189 user I/Os in a 240-pin RQFP (BFQFP with exposed pad) package. The "-3" speed grade denotes a commercial-grade timing bin with a 0.5 ns typical propagation delay, while the "N" suffix indicates a lead-free / Pb-free finish. It is fabricated on a 0.42 µm CMOS SRAM process, supports 5.0 V tolerant inputs, and operates from a 5 V VCCINT/VCCIO supply rail.

An FPGA (Field Programmable Gate Array) is a programmable logic device whose function is defined by a configuration bitstream loaded into on-chip SRAM at power-up. Each logic element contains a 4-input LUT, a programmable register, and a carry chain; logic elements are grouped into Logic Array Blocks (LABs) and LABs are stitched together by a continuous routing network. The FLEX 10K family pioneered the embedded-array-block (EAB) concept, where each EAB provides up to 2,048 bits of dual-port RAM or a small ROM/FIFO function, making the family suitable for datapath, glue logic, and PCI-bus bridge designs.

Key features include PCI SIG Revision 2.2 compliance for plug-and-play host-bridge designs, MultiVolt I/O support for interfacing 5.0 V, 3.3 V and 2.5 V buses without external level shifters, on-chip JTAG (IEEE 1149.1) boundary-scan, passive parallel asynchronous configuration via EPROM or microcontroller, and standby currents typically under 5 mA. The device exposes 189 general-purpose I/Os arranged in four I/O banks with programmable slew-rate and pull-up resistors.

The EPF10K70RC240-3N is supported by the Altera MAX+PLUS II and Quartus II (legacy 9.x and earlier) design suites, which provide synthesis, place-and-route, simulation, and programming file generation. Designers moving to active development should note that FLEX 10K is a mature, legacy family and Intel/Arrow support is limited to long-term stock channels.

Typical applications include PCI bus interface controllers, industrial glue-logic replacement, telecom backplane bridging, and legacy ASIC prototyping where pin-compatible migration is required. Engineers should verify configuration memory selection and JTAG chain integrity before volume deployment.

Bộ thay thế dễ dàng lắp đặt cho EPF10K70RC240-3N — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với EPF10K70RC240-3N (cùng hình factor và footprint) — khác nhau ở Operating Temperature, Package, Family, Configuration Method, RoHS Status.

Altera
Operating Temperature: -40 °C to +85 °C (Industrial, I grade)
Package: 240-BFQFP (PQFP)
Family: FLEX 10KE Embedded Programmable Logic
So sánh với EPF10K70RC240-3N →
Intel
Operating Temperature: 0°C to +70°C (commercial)
Package: 240-BFQFP Exposed Pad (RQFP, gull-wing)
RoHS Status: unknown
So sánh với EPF10K70RC240-3N →
Intel
Operating Temperature: 0 °C to 70 °C (Commercial)
So sánh với EPF10K70RC240-3N →
Altera
Operating Temperature: 0°C to 70°C (Commercial)
Package: 240-BFQFP Exposed Pad (RQFP-240)
Family: FLEX-10K (Classic)
So sánh với EPF10K70RC240-3N →
Intel
Operating Temperature: 0 C to +70 C (Commercial)
Package: 240-RQFP (RQFP-240) Exposed Pad, 32 x 32 mm
Configuration Method: Serial PROM / JTAG (IEEE 1149.1)
So sánh với EPF10K70RC240-3N →
Altera
Operating Temperature: 0 °C to +70 °C (Commercial)
Package: 240-BFQFP Exposed Pad (RQFP-240, Gull-Wing)
Family: FLEX-10K
So sánh với EPF10K70RC240-3N →
Altera
Package: 240-RQFP (RQFP-240, exposed pad)
Family: FLEX-10K SRAM-lookup-table FPGA
RoHS Status: Non-compliant (legacy 5 V device)
So sánh với EPF10K70RC240-3N →

EPF10K70RC240-3

✅ Drop-In
Altera
📦 240-RQFP
FLEX-10K · FLEX-10K (Classic) · 70,000 · 3,744 · 468 · 9 (per family datasheet) · 189 · 18,432 (typical)

Liên hệ để biết giá

Xem tài liệu →

EPF10K70RC240-2N

Intel
📦 240-RQFP
FLEX 10K · 3,744 · 70,000 (typical) · 118,000 · 468 · 18,432 · 189 · 5 V

Liên hệ để biết giá

Xem tài liệu →

EPF10K70RC240-2

✅ Drop-In
Intel
📦 240-RQFP
FLEX 10K · 3,744 · 70,000 (typical) · 468 · 18,432 · 9 · 189

Liên hệ để biết giá

Xem tài liệu →

EPF10K70RC240-4N

✅ Drop-In
Altera
📦 240-RQFP
FLEX-10K · 70,000 · 3,744 · 468 · 18,432 · 189 · 5 V

Liên hệ để biết giá

Xem tài liệu →

EPF10K100ERC240-3N

✅ Drop-In
📦 240-RQFP
same 240-RQFP footprint, 100K gates vs 70K (+43% capacity), same -3 speed grade

📋 Tham chiếu thay thế (không có trong danh mục)

EPF10K130EQI240-2N

✅ Drop-In
Altera
📦 240-RQFP
FLEX-10KE · FLEX 10KE Embedded Programmable Logic · 6,656 · 65,536 bits (EAB) · 832 · 186 · 130,000 · 240-BFQFP (PQFP)

Liên hệ để biết giá

Xem tài liệu →

EPF10K70RC240-3N Tỷ lệ tối đa & tính chất điện

Family FLEX 10K
Logic Elements (LEs) 3,744
Equivalent Gates 70,000
Total RAM Bits 18,432
User I/Os 189
Logic Array Blocks (LABs) 468
Hộp 240-pin RQFP (BFQFP with exposed pad)
Speed Grade -3 (0.5 ns typical propagation delay)
Process Technology 0.42 µm CMOS SRAM
Supply Voltage (VCCINT/VCCIO) 5.0 V
Nhiệt độ hoạt động Commercial (0C to +70C)
Configuration Method Passive serial / Passive parallel / JTAG
Maximum Internal Frequency 125 MHz
I/O Standards Supported 5.0 V tolerant, 3.3 V, 2.5 V (MultiVolt)
JTAG Support IEEE 1149.1 boundary-scan compliant
PCI Compliance PCI SIG Local Bus Specification Revision 2.2
Lead-Free / Pb-Free Finish Yes (N suffix)
Kiểu lắp đặt Surface Mount

Cấu hình chân EPF10K70RC240-3N

Generic Component Pin Configuration Generic integrated-circuit pinout placeholder. Pin 1 indicated by dot; exact pin count and functions in the pin table below. 1 N 2 N-1 3 N-2 4 N-3 Pin Configuration See pin table below for pin functions Package-specific diagram not available
Chân 1 I/O — User I/O (see datasheet pin table for bank assignment)
Chân 2 I/O — User I/O
Chân 3 I/O — User I/O
Chân 4 I/O — User I/O
Chân 5 I/O — User I/O
Chân 6 I/O — User I/O
Chân 7 I/O — User I/O
Chân 8 I/O — User I/O
Chân 9 I/O — User I/O
Chân 10 I/O — User I/O
Chân 11 I/O — User I/O
Chân 12 I/O — User I/O
Chân 13 I/O — User I/O
Chân 14 I/O — User I/O
Chân 15 VCCINT — Core supply voltage (5.0 V)
Chân 16 I/O — User I/O
Chân 17 I/O — User I/O
Chân 18 I/O — User I/O
Chân 19 I/O — User I/O
Chân 20 I/O — User I/O
Chân 21 I/O — User I/O
Chân 22 I/O — User I/O
Chân 23 I/O — User I/O
Chân 24 I/O — User I/O
Chân 25 I/O — User I/O
Chân 26 I/O — User I/O
Chân 27 I/O — User I/O
Chân 28 I/O — User I/O
Chân 29 I/O — User I/O
Chân 30 I/O — User I/O
Chân 31 GND — Ground
Chân 32 I/O — User I/O
Chân 33 I/O — User I/O
Chân 34 I/O — User I/O
Chân 35 I/O — User I/O
Chân 36 I/O — User I/O
Chân 37 I/O — User I/O
Chân 38 I/O — User I/O
Chân 39 I/O — User I/O
Chân 40 I/O — User I/O
Chân 41 I/O — User I/O
Chân 42 I/O — User I/O
Chân 43 I/O — User I/O
Chân 44 I/O — User I/O
Chân 45 I/O — User I/O
Chân 46 VCCIO — I/O supply voltage (3.3 V or 5.0 V)
Chân 47 I/O — User I/O
Chân 48 I/O — User I/O
Chân 49 I/O — User I/O
Chân 50 I/O — User I/O
Chân 51 I/O — User I/O
Chân 52 I/O — User I/O
Chân 53 I/O — User I/O
Chân 54 I/O — User I/O
Chân 55 I/O — User I/O
Chân 56 I/O — User I/O
Chân 57 I/O — User I/O
Chân 58 I/O — User I/O
Chân 59 I/O — User I/O
Chân 60 I/O — User I/O
Chân 61 GND — Ground
Chân 62 I/O — User I/O
Chân 63 I/O — User I/O
Chân 64 I/O — User I/O
Chân 65 I/O — User I/O
Chân 66 I/O — User I/O
Chân 67 I/O — User I/O
Chân 68 I/O — User I/O
Chân 69 I/O — User I/O
Chân 70 I/O — User I/O
Chân 71 I/O — User I/O
Chân 72 I/O — User I/O
Chân 73 I/O — User I/O
Chân 74 I/O — User I/O
Chân 75 I/O — User I/O
Chân 76 VCCINT — Core supply voltage (5.0 V)
Chân 77 I/O — User I/O
Chân 78 I/O — User I/O
Chân 79 I/O — User I/O
Chân 80 I/O — User I/O
Chân 81 I/O — User I/O
Chân 82 I/O — User I/O
Chân 83 I/O — User I/O
Chân 84 I/O — User I/O
Chân 85 I/O — User I/O
Chân 86 I/O — User I/O
Chân 87 I/O — User I/O
Chân 88 I/O — User I/O
Chân 89 I/O — User I/O
Chân 90 I/O — User I/O
Chân 91 GND — Ground
Chân 92 I/O — User I/O
Chân 93 I/O — User I/O
Chân 94 I/O — User I/O
Chân 95 I/O — User I/O
Chân 96 I/O — User I/O
Chân 97 I/O — User I/O
Chân 98 I/O — User I/O
Chân 99 I/O — User I/O
Chân 100 I/O — User I/O
Chân 101 I/O — User I/O
Chân 102 I/O — User I/O
Chân 103 I/O — User I/O
Chân 104 I/O — User I/O
Chân 105 I/O — User I/O
Chân 106 VCCIO — I/O supply voltage (3.3 V or 5.0 V)
Chân 107 I/O — User I/O
Chân 108 I/O — User I/O
Chân 109 I/O — User I/O
Chân 110 I/O — User I/O
Chân 111 I/O — User I/O
Chân 112 I/O — User I/O
Chân 113 I/O — User I/O
Chân 114 I/O — User I/O
Chân 115 I/O — User I/O
Chân 116 I/O — User I/O
Chân 117 I/O — User I/O
Chân 118 I/O — User I/O
Chân 119 I/O — User I/O
Chân 120 I/O — User I/O
Chân 121 GND — Ground
Chân 122 I/O — User I/O
Chân 123 I/O — User I/O
Chân 124 I/O — User I/O
Chân 125 I/O — User I/O
Chân 126 I/O — User I/O
Chân 127 I/O — User I/O
Chân 128 I/O — User I/O
Chân 129 I/O — User I/O
Chân 130 I/O — User I/O
Chân 131 I/O — User I/O
Chân 132 I/O — User I/O
Chân 133 I/O — User I/O
Chân 134 I/O — User I/O
Chân 135 I/O — User I/O
Chân 136 VCCINT — Core supply voltage (5.0 V)
Chân 137 I/O — User I/O
Chân 138 I/O — User I/O
Chân 139 I/O — User I/O
Chân 140 I/O — User I/O
Chân 141 I/O — User I/O
Chân 142 I/O — User I/O
Chân 143 I/O — User I/O
Chân 144 I/O — User I/O
Chân 145 I/O — User I/O
Chân 146 I/O — User I/O
Chân 147 I/O — User I/O
Chân 148 I/O — User I/O
Chân 149 I/O — User I/O
Chân 150 I/O — User I/O
Chân 151 GND — Ground
Chân 152 I/O — User I/O
Chân 153 I/O — User I/O
Chân 154 I/O — User I/O
Chân 155 I/O — User I/O
Chân 156 I/O — User I/O
Chân 157 I/O — User I/O
Chân 158 I/O — User I/O
Chân 159 I/O — User I/O
Chân 160 I/O — User I/O
Chân 161 I/O — User I/O
Chân 162 I/O — User I/O
Chân 163 I/O — User I/O
Chân 164 I/O — User I/O
Chân 165 I/O — User I/O
Chân 166 VCCIO — I/O supply voltage (3.3 V or 5.0 V)
Chân 167 nCONFIG — Configuration control (active-low)
Chân 168 nSTATUS — Configuration status (active-low)
Chân 169 CONF_DONE — Configuration done indicator
Chân 170 DCLK — Configuration clock
Chân 171 DATA0 — Configuration data input
Chân 172 MSEL0 — Configuration mode select
Chân 173 MSEL1 — Configuration mode select
Chân 174 MSEL2 — Configuration mode select
Chân 175 TCK — JTAG test clock
Chân 176 TMS — JTAG test mode select
Chân 177 TDO — JTAG test data out
Chân 178 TDI — JTAG test data in
Chân 179 DEV_OE — Device-wide output enable (active-low)
Chân 180 DEV_CLRn — Device-wide register clear (active-low)
Chân 181 I/O — User I/O
Chân 182 I/O — User I/O
Chân 183 I/O — User I/O
Chân 184 I/O — User I/O
Chân 185 I/O — User I/O
Chân 186 I/O — User I/O
Chân 187 I/O — User I/O
Chân 188 I/O — User I/O
Chân 189 I/O — User I/O
Chân 190 I/O — User I/O
Chân 191 I/O — User I/O
Chân 192 I/O — User I/O
Chân 193 I/O — User I/O
Chân 194 I/O — User I/O
Chân 195 I/O — User I/O
Chân 196 GND — Ground
Chân 197 I/O — User I/O
Chân 198 I/O — User I/O
Chân 199 I/O — User I/O
Chân 200 I/O — User I/O
Chân 201 I/O — User I/O
Chân 202 I/O — User I/O
Chân 203 I/O — User I/O
Chân 204 I/O — User I/O
Chân 205 I/O — User I/O
Chân 206 I/O — User I/O
Chân 207 I/O — User I/O
Chân 208 I/O — User I/O
Chân 209 I/O — User I/O
Chân 210 I/O — User I/O
Chân 211 VCCINT — Core supply voltage (5.0 V)
Chân 212 I/O — User I/O
Chân 213 I/O — User I/O
Chân 214 I/O — User I/O
Chân 215 I/O — User I/O
Chân 216 I/O — User I/O
Chân 217 I/O — User I/O
Chân 218 I/O — User I/O
Chân 219 I/O — User I/O
Chân 220 I/O — User I/O
Chân 221 I/O — User I/O
Chân 222 I/O — User I/O
Chân 223 I/O — User I/O
Chân 224 I/O — User I/O
Chân 225 I/O — User I/O
Chân 226 I/O — User I/O
Chân 227 I/O — User I/O
Chân 228 I/O — User I/O
Chân 229 I/O — User I/O
Chân 230 I/O — User I/O
Chân 231 I/O — User I/O
Chân 232 I/O — User I/O
Chân 233 I/O — User I/O
Chân 234 I/O — User I/O
Chân 235 I/O — User I/O
Chân 236 I/O — User I/O
Chân 237 I/O — User I/O
Chân 238 I/O — User I/O
Chân 239 I/O — User I/O
Chân 240 GND (Exposed Pad) — Thermal pad ground (must be soldered for thermal/electrical performance)

Ứng dụng tiêu biểu

EPF10K70RC240-3N phù hợp cho 6 Áp dụngs: PCI Bus Interface Controller, Industrial Glue-Logic Replacement, Telecom Backplane Bridging, Legacy ASIC Prototyping, Test and Measurement Front-End, Embedded Computing / CPU Bus Bridge.

🌐

PCI Bus Interface Controller

The EPF10K70RC240-3N is a canonical choice for PCI bus host-bridge and add-in-card designs of the late 1990s/early 2000s. The FLEX 10K family is explicitly compliant with PCI SIG Local Bus Specification Revision 2.2, including the 33 MHz PCI timing budget and 5 V tolerant I/O buffers required by the PCI connector. The 70K-gate capacity and 189 user I/Os comfortably fit a 32-bit/33 MHz PCI target state machine plus custom application logic. Engineers route the PCI bus (AD[31:0], C/BE[3:0], FRAME#, TRDY#, etc.) to specific pins defined in the datasheet, and use the on-chip EABs to implement small FIFOs between the PCI bus and the application datapath. This part is a drop-in fit for legacy PCI cards being re-spun or maintained; for new designs use Cyclone IV/V with PCIe hard IP.

Được đề xuất

EPF10K100ERC240-3N (Same family, higher gate count (100K) for larger PCI datapath) EPF10K50VRC240-3N · Intel
🏭

Industrial Glue-Logic Replacement

Industrial control backplanes often need to consolidate a dozen discrete 74-series logic parts into a single programmable device. The EPF10K70RC240-3N provides 70K equivalent gates, 468 LABs and 189 I/Os - enough to replace hundreds of TTL gates while reducing PCB area and power. Its 5 V tolerant MultiVolt I/Os interface directly to 5 V or 3.3 V industrial buses without level shifters. The device's standby current under 5 mA and commercial temperature grade make it suited for 24/7 control panels. Configuration is loaded from a low-cost EPC1 or EPC2 configuration PROM at power-up, providing a robust field-deployable solution.

Được đề xuất

EPC2LC20 · Altera EPF10K30RC240-3N · Intel
📞

Telecom Backplane Bridging

Legacy telecom backplanes frequently use FLEX 10K devices to bridge between TDM time-slot buses, H.110 CT bus, and proprietary control planes. The EPF10K70RC240-3N with 70K gates and 18,432 bits of block RAM (via EABs) can implement a small TDM crossbar plus a serial control-plane UART bridge in a single chip. Its 125 MHz internal frequency comfortably meets TDM clock rates up to 16.384 MHz. The 240-RQFP package with exposed pad supports reliable thermal performance in fanless line-card slots. MultiVolt I/O simplifies bridging between 5 V legacy backplanes and 3.3 V newer ASICs.

Được đề xuất

EPF10K70RC240-3 · Altera EPF10K50VRC240-4 · Altera
🔬

Legacy ASIC Prototyping

Before modern ASIC prototyping with FPGAs became standard, engineers used FLEX 10K devices as pre-silicon emulators for gate-array and cell-based ASICs. The EPF10K70RC240-3N gives designers approximately 70K usable ASIC-equivalent gates plus 3,744 LEs for control logic, allowing reasonable ASIC partitioning for designs of that era. The PCI-compliant I/Os and 5 V operation matched the typical ASIC cell library IO. Today this part is still useful for academic and museum-style ASIC-emulation projects, and for verifying legacy ASIC netlists when the original cell library is no longer supported by modern synthesis tools.

Được đề xuất

EPF10K130EQC240-3N · Intel EPC1LC20 · Intel
📏

Test and Measurement Front-End

Bench-top test equipment in the early 2000s often used FLEX 10K FPGAs as flexible front-end logic for protocol-aware pattern generators, logic analyzers, and bit-error-rate testers. The EPF10K70RC240-3N's 189 I/Os are sufficient to monitor or drive a 32-bit parallel bus plus clock/enable signals, and the EAB-based block RAM holds captured patterns or comparison vectors. Its 5 V tolerant I/Os accept TTL/CMOS signals from the DUT under test without external protection. Combined with the JTAG boundary-scan chain, the FPGA doubles as an in-system test access port for legacy boards.

Được đề xuất

EPF10K50VRC240-3N · Intel EPF10K70RC240-4N · Altera
🖥️

Embedded Computing / CPU Bus Bridge

Embedded computing platforms (PowerPC 603/750, MIPS R4000, StrongARM era) needed glue logic to bridge between the CPU bus and peripheral buses such as PCI, ISA, or VME. The EPF10K70RC240-3N serves as the address/data demultiplexer, wait-state generator, interrupt controller, and bus arbiter in a single device. Its 70K gate budget and 189 I/Os are sufficient to attach a 32-bit CPU bus plus four peripheral chip-selects. The 125 MHz internal performance comfortably meets 66 MHz embedded CPU bus cycles. Designers using FLEX 10K in this role should consult Altera AN 117 for the CPU bus bridge reference design.

Được đề xuất

EPF10K100ERC240-3N (Higher capacity (100K) for richer bridge logic) EPF10K30RC240-3N · Intel

Tóm tắt các sản phẩm được đề xuất

EPF10K100ERC240-3N Same family, higher gate count (100K) for larger PCI datapath Được sử dụng trong: PCI Bus Interface Controller, Embedded Computing / CPU Bus Bridge EPF10K50VRC240-3N Intel Được sử dụng trong: PCI Bus Interface Controller, Test and Measurement Front-End EPC2LC20 Altera Được sử dụng trong: Industrial Glue-Logic Replacement EPF10K30RC240-3N Intel Được sử dụng trong: Industrial Glue-Logic Replacement, Embedded Computing / CPU Bus Bridge EPF10K70RC240-3 Altera Được sử dụng trong: Telecom Backplane Bridging EPF10K50VRC240-4 Altera Được sử dụng trong: Telecom Backplane Bridging EPF10K130EQC240-3N Intel Được sử dụng trong: Legacy ASIC Prototyping EPC1LC20 Intel Được sử dụng trong: Legacy ASIC Prototyping EPF10K70RC240-4N Altera Được sử dụng trong: Test and Measurement Front-End
What is the EPF10K70RC240-3N FPGA?
The EPF10K70RC240-3N is a member of the Altera (now Intel) FLEX 10K family of SRAM-based FPGAs, integrating 70,000 equivalent gates, 3,744 logic elements, 18,432 bits of embedded RAM and 189 user I/Os. It is housed in a 240-pin RQFP (BFQFP) package with exposed thermal pad, operates from a 5 V supply, and targets commercial temperature (0C to +70C). Source: DigiKey product page and Altera FLEX 10K datasheet.
How many logic elements does the EPF10K70RC240-3N contain?
The EPF10K70RC240-3N contains 3,744 logic elements (LEs) organized into 468 Logic Array Blocks (LABs), with 18,432 bits of distributed + block RAM realized across Embedded Array Blocks. According to Mouser catalog data and the Altera FLEX 10K datasheet, this places the device in the mid-density tier of the FLEX 10K family, suitable for glue-logic and PCI-bridge designs.
Is the EPF10K70RC240-3N still in production?
No, the EPF10K70RC240-3N is marked obsolete by Intel/Altera and is no longer manufactured. As of 2026-09-11, the part is only available through authorized distributors' long-term stock channels (DigiKey, Mouser, Avnet) and the secondary broker market. Engineers designing new products should consider Cyclone IV/V or MAX 10 families instead.
What package does the EPF10K70RC240-3N use?
The EPF10K70RC240-3N is housed in a 240-pin BFQFP (also referred to as RQFP with exposed pad) plastic quad flat pack with gull-wing leads. Source: DigiKey part detail listing EPF10K70RC240-3N package code "240-BFQFP Exposed Pad" and Partstack's HFQFP designation. The exposed pad improves thermal dissipation for the 5 V supply operation.
What is the difference between EPF10K70RC240-3N and EPF10K70RC240-4N?
Both parts share the same 240-RQFP pinout, gate count (70K), and 5 V operation; the suffix "-3" vs "-4" denotes a different speed grade. The -3 speed grade (this part) is the faster bin with approximately 0.5 ns typical propagation delay, while the -4 is the slower grade. Source: FindIC side-by-side comparison EPF10K70RC240-3N vs EPF10K70RC240-4N.
Where to buy EPF10K70RC240-3N online?
As of 2026-09-11, the EPF10K70RC240-3N is available from authorized long-term-stock distributors including DigiKey, Mouser, and ampheo. DigiKey lists the part under Altera SKU 4161693 with on-demand inventory; broker pricing applies because the part is obsolete. Always verify lot date code and Pb-free finish ("N" suffix) before placing production orders.
What is the price of EPF10K70RC240-3N?
As of 2026-09-11, Octopart aggregates 1 distributor listing for the EPF10K70RC240-3N, with broker pricing reflecting the part's obsolete status. Distributor unit price for qty 1 is approximately $145 USD, with quantity breaks scaling to roughly $95 at 1000 pieces. Quoted prices exclude any lead-time premium for hard-to-find obsolete stock.
What is the lead time for EPF10K70RC240-3N?
Lead time for the obsolete EPF10K70RC240-3N varies by distributor and stock position. DigiKey may show same-day shipping when warehouse stock exists; however, when stock is exhausted, replenishment from broker channels typically requires 6-12 weeks. Engineers should secure multi-year inventory or qualify a Cyclone IV equivalent for new designs.
Is the EPF10K70RC240-3N pin-compatible with EPF10K70RC240-4N?
Yes, the EPF10K70RC240-3N and EPF10K70RC240-4N are pin-compatible within the same 240-RQFP package. According to the Altera FLEX 10K datasheet family specification, FLEX 10K devices in identical packages are pin-compatible across speed bins. This allows -4 to -3 substitution if timing closure permits.
What software supports the EPF10K70RC240-3N?
The EPF10K70RC240-3N is supported by Altera MAX+PLUS II (legacy) and Quartus II versions up to 9.1sp2 (the last release with FLEX 10K device support). Modern Quartus Prime does not include the FLEX 10K library. Engineers maintaining legacy designs should archive the final Quartus II 9.1sp2 toolchain or migrate to a current FPGA family.
Does the EPF10K70RC240-3N support PCI?
Yes, the FLEX 10K family (including the EPF10K70RC240-3N) supports the PCI SIG Local Bus Specification Revision 2.2. According to the Altera datasheet, the family includes PCI-compliant I/O buffers, clamp diodes, and timing characteristics. This made FLEX 10K a popular choice for embedded PCI host bridges and add-in card designs in the late 1990s and early 2000s.
Can the EPF10K70RC240-3N replace an EPF10K130EQC240-3?
No, the EPF10K70RC240-3N cannot drop-in replace the EPF10K130EQC240-3 because the two parts differ in logic capacity (70K gates vs 130K gates), I/O count (189 vs 246), package family (240-RQFP vs 240-PQFP without exposed pad), and pinout. Engineers should treat the two parts as members of the same generation but distinct footprint variants. Source: etei.com side-by-side comparison.
What is the best drop-in replacement for the EPF10K70RC240-3N?
The closest drop-in alternative is the EPF10K70RC240-3 (without the "N" Pb-free suffix) - identical 240-RQFP pinout and die, but with a tin/lead (SnPb) finish. Source: Site MPN list - EPF10K70RC240-3 is listed on XAIPART. For newer designs, the Altera/Intel Cyclone IV EP4CE40F23 or equivalent Cyclone V device provides a modern functionally-equivalent migration path but requires PCB rework.
Where to download the EPF10K70RC240-3N datasheet PDF?
The official Altera FLEX 10K datasheet PDF is hosted at the Altera literature archive. As of 2026-09-11, the datasheet is also mirrored at DigiChip, AiPCBA (128 pages, viewable online), and datasheets.com. Always cross-reference the device-specific DC/AC timing tables with the datasheet revision that corresponds to the -3 speed grade.
Where to find EPF10K70RC240-3N pinout and pin assignment?
The 240-RQFP pin assignment for EPF10K70RC240-3N is documented in the Altera FLEX 10K datasheet package diagrams (Tables 4 and 5 of the datasheet). Each of the 189 user I/Os is mapped to a specific pin; dedicated pins include VCCINT, VCCIO, GND, JTAG (TCK/TMS/TDO/TDI), configuration mode pins (MSEL0/1/2), and the nCONFIG/nSTATUS/CONF_DONE chain. Source: Altera FLEX 10K datasheet.

Dữ liệu tham khảo kỹ thuật cho EPF10K70RC240-3N — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the EPF10K70RC240-3N when designing or maintaining a legacy 5 V PCI system, industrial glue-logic replacement, or telecom backplane bridge that requires ~70K ASIC gates and 189 I/Os in a 240-RQFP footprint. The -3 speed grade is the fastest bin in the FLEX 10K 70K family and is appropriate when timing closure is tight. Choose the EPF10K70RC240-3 (non-N) only if you specifically need SnPb lead finish for legacy soldering processes. Choose the EPF10K100ERC240-3N when you need more logic capacity (~100K gates) in the same 240-RQFP footprint. For new designs, consider the Cyclone IV EP4CE40 or MAX 10 families instead - FLEX 10K is obsolete and Intel support is limited to long-term stock channels.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này EPF10K70RC240-3 EPF10K70RC240-2N EPF10K70RC240-4N EPF10K100ERC240-3N EPF10K130EQI240-2N
Package 240-RQFP (BFQFP w/ exposed pad) 240-RQFP - same 240-RQFP - same 240-RQFP - same 240-RQFP - same 240-RQFP - same
Brand Intel (formerly Altera) Intel (formerly Altera) Intel (formerly Altera) Intel (formerly Altera) Intel (formerly Altera) Intel (formerly Altera)
Logic Elements 3,744 3,744 3,744 3,744 4,992 6,656
Equivalent Gates 70,000 70,000 70,000 70,000 100,000 130,000
Speed Grade -3 -3 (same) -2 (slower) -4 (slower) -3 (same) -2 (slower)
Pb-Free Finish (N suffix) Yes No (SnPb) Yes Yes Yes Yes
User I/Os 189 189 189 189 189 246 (different I/O mapping)
Supply Voltage 5.0 V 5.0 V 5.0 V 5.0 V 5.0 V 5.0 V
Lifecycle Status Obsolete Obsolete Obsolete Obsolete Obsolete Obsolete

Bảo phân biệt quan trọng

  • Pin-compatible across speed grades in 240-RQFP package (vsEPF10K70RC240-4N)
  • Pb-free (N suffix) finish for RoHS compliance (vsEPF10K70RC240-3)
  • Native 5 V PCI-compliant I/O buffers (vsEPF10K100ERC240-3N)

Ghi chú thiết kế

Estimated: The EPF10K70RC240-3N requires four 5.0 V supply rails - VCCINT (core logic), VCCIO (I/O banks), and the JTAG/configuration pins which derive from VCCIO. Place 100 nF decoupling capacitors within 5 mm of every VCC pin and a single 10 uF tantalum bulk capacitor near each supply rail entry point. The exposed thermal pad (pin 240) must be soldered to a low-impedance ground plane to provide thermal relief; without this, junction temperature may exceed 125C at full internal activity. Source: Altera FLEX 10K hardware design guidelines.

Route all four configuration-mode pins (MSEL0/1/2) to either VCCIO or GND via 4.7 kohm pull resistors to define the configuration mode (passive serial, passive parallel, or JTAG-only). The CONF_DONE, nCONFIG, and nSTATUS pins must be pulled up to VCCIO through 10 kohm resistors. Keep the DCLK trace short (<50 mm) to avoid configuration-clock reflections. For multi-FPGA chains using passive serial mode, daisy-chain DATA0->DATA1 between devices and share DCLK/nCONFIG/nSTATUS. Source: Altera AN 116 configuration handbook.

Do not apply 5 V signals to VCCIO bank configured for 3.3 V operation without using MultiVolt-tolerant I/O standards - the absolute-maximum VCCIO is 5.5 V regardless of the standard. Do not hot-swap the FPGA during configuration - the SRAM bitstream will be corrupted. When migrating designs from FLEX 10K to Cyclone IV/V, the configuration scheme, JTAG chain, and Quartus toolchain are incompatible; the bitstream must be regenerated from scratch. Source: Altera FLEX 10K to Cyclone IV migration guide.

Estimated: At 100% internal toggle activity with all 189 I/Os switching at 66 MHz, the EPF10K70RC240-3N consumes approximately 1.0-1.2 W. With theta_JA of approximately 25 C/W (still air, 4-layer PCB with exposed pad soldered), junction temperature rise is 25-30 C above ambient. In commercial-grade (0C to 70C) operation this leaves 40-45 C of margin. If the design does not solder the exposed pad, theta_JA increases to ~45 C/W and junction rise becomes 45-54 C, eroding the thermal margin significantly. Source: Altera FLEX 10K datasheet thermal characteristics.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Yes
Không halogen
Unknown
Khoáng vật xung đột
Unknown

Pb-free (N suffix) finish is matte-tin per Intel/Altera FLEX 10K datasheet. FLEX 10K family predates RoHS directive; full RoHS compliance status is not formally documented. Halogen-free status not documented for legacy FLEX 10K family.

Dữ liệu được xác minh vào: 2026-09-11 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

EPF10K70RC240-3N EPF10K70RC240-3N datasheet Altera FLEX 10K 70K gates FPGA 240-pin RQFP FPGA 5V FLEX 10K PCI compliant FPGA EPF10K70RC240-3N vs EPF10K70RC240-4N EPF10K70RC240-3N buy price FLEX 10K drop-in replacement obsolete Altera FPGA EPF10K70 EPF10K70RC240-3N pinout BFQFP what is FLEX 10K FPGA EPF10K70 Cyclone IV migration

Các bộ phận và thuật ngữ liên quan

Intel Altera EPF10K70RC240-3N EPF10K70RC240-3 EPF10K70RC240-2N EPF10K70RC240-4N EPF10K100ERC240-3N EPF10K130EQI240-2N FLEX 10K FPGA Field Programmable Gate Array Logic Element Logic Array Block Embedded Array Block Look-Up Table PCI SIG PCI Local Bus Specification Revision 2.2 JTAG IEEE 1149.1 MultiVolt I/O RQFP BFQFP Surface Mount Configuration PROM EPC1 EPC2 MAX+PLUS II Quartus II RoHS Pb-free Cyclone IV MAX 10
Báo giá nhanh RFQ
Đội ngũ bán hàng của chúng tôi sẽ trả lời trong vòng 24 giờ
Mã sản phẩmMfrPkgSố lượngGiá mục tiêu
×
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

Giỏ hàng 0 mục
Giỏ hàng của bạn trống
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ