EPF6024AQI208-3N - FLEX 6000 FPGA 24K Gates | Altera EPF6024AQI208-3N oleh Altera - komponen elektronik
Altera

EPF6024AQI208-3N - FLEX 6000 FPGA 24K Gates | Altera

MPN: EPF6024AQI208-3N ✗ Akhir Hidup
3.3 V Vdss 208-pin PQFP / BFQFP Package 142.86 MHz Speed
Ajukan Diskon
MOQ: 1 |
Lihat Datasheet (PDF) Lihat Alternatif

EPF6024AQI208-3N Ringkasan

The Altera EPF6024AQI208-3N is a member of the FLEX 6000 family of Field Programmable Gate Arrays, delivering 24,000 gates, 1,960 logic elements (cells), and a maximum internal operating frequency of 142.86 MHz in a 208-pin Plastic Quad Flat Pack (PQFP/BFQFP) package. Manufactured on a 0.42 µm CMOS process with a 3.3 V core supply, the device combines a register-rich, look-up-table (LUT) based OptiFLEX architecture with 171 user I/O pins, making it suited for high-volume gate array replacement and rapid prototyping flows.

A Field Programmable Gate Array (FPGA) is a type of programmable logic device (PLD) that allows engineers to implement arbitrary digital logic via a configurable array of logic blocks, routing channels, and I/O cells. Within the broader taxonomy, the FLEX 6000 sits as a low-cost, register-rich mid-density FPGA, positioned between simple CPLDs and higher-density SRAM-based FPGAs such as the FLEX 10K and APEX families. The FLEX 6000 family was specifically architected as an ideal low-cost programmable alternative to high-volume gate array applications, enabling fast design changes during prototyping and design testing.

Key features include the OptiFLEX architecture for high utilization, multiVolt I/O support for interfacing with 2.5 V, 3.3 V, and 5 V buses, in-system programmability through a dedicated configuration interface, and JTAG boundary-scan test support per IEEE 1149.1. The "3N" speed grade designation places this part in a specific performance bin optimized for typical commercial industrial temperature ranges. With 1,960 logic elements and abundant user I/O, the EPF6024AQI208-3N delivers substantial logic capacity for glue logic, bus bridging, and parallel DSP pre/post-processing tasks.

From an architectural perspective, the FLEX 6000 family employs continuous, segmented routing interconnect combined with dedicated carry chains and cascade chains that accelerate arithmetic and wide datapath operations. The 0.42 µm four-metal-layer CMOS process delivers a balance of die density, static power, and 3.3 V tolerance that was industry-leading at product introduction.

Typical applications include industrial control glue logic, telecommunications interface bridging, prototyping of ASIC designs, parallel peripheral controllers, and embedded system bus arbiters. The 208-pin PQFP package and 171 user I/O pins enable direct interfacing with wide parallel buses such as PCI, ISA, and external memory buses.

When designing with this device, pay close attention to configuration mode selection and the configuration device interface, since the FLEX 6000 family supports both passive serial and passive parallel configuration schemes with EPC configuration memories. Designers should also verify supply decoupling on every VCCINT and VCCIO pin per the FLEX 6000 Device Family datasheet recommendations.

This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Alternatif penggantian untuk EPF6024AQI208-3N — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian EPF6024AQI208-3N (sama faktor bentuk dan footprint) — berbeda di dalam Package, Process Technology, Operating Temperature, Configuration Method, Speed Grade.

Intel
Package: 208-pin PQFP (BFQFP)
Operating Temperature: 0 °C to +85 °C (commercial)
Configuration Method: SRAM, via EPC1/EPC2 EPROM or ByteBlaster/BitBlaster
Bandingkan dengan EPF6024AQI208-3N →
Intel
Package: 208-pin PQFP / BFQFP (plastic)
Operating Temperature: 0 °C to 85 °C (commercial)
Speed Grade: -3
Bandingkan dengan EPF6024AQI208-3N →
Intel
Package: 208-pin PQFP (BFQFP)
Process Technology: 0.42 µm CMOS SRAM
Operating Temperature: 0 °C to +85 °C (commercial)
Bandingkan dengan EPF6024AQI208-3N →
Intel
Package: 208-pin PQFP / BFQFP (28 mm x 28 mm, gull-wing)
Process Technology: 0.42 um CMOS SRAM
Operating Temperature: -40 C to +85 C (industrial)
Bandingkan dengan EPF6024AQI208-3N →
Altera
Package: 208-pin PQFP (Plastic Quad Flat Pack), 0.5 mm pitch
Process Technology: CMOS, SRAM configuration
Configuration Method: Passive Serial (PS) / Passive Parallel Async (PPA)
Bandingkan dengan EPF6024AQI208-3N →
Intel
Package: 208-pin PQFP (Plastic Quad Flat Pack)
Operating Temperature: 0 °C to +70 °C (commercial)
Speed Grade: -3
Bandingkan dengan EPF6024AQI208-3N →
Altera
Package: 208-pin PQFP (QFP-208)
Process Technology: CMOS SRAM
Speed Grade: -4
Bandingkan dengan EPF6024AQI208-3N →
Intel
Package: 208-pin Power Quad Flat Pack (PQFP)
Process Technology: SRAM-based CMOS LUT
Operating Temperature: -40 °C to +85 °C (Industrial)
Bandingkan dengan EPF6024AQI208-3N →
Altera
Package: 208-Pin PQFP
Operating Temperature: -40C to +85C (Industrial)
Configuration Method: SRAM (JTAG/ISP)
Bandingkan dengan EPF6024AQI208-3N →

EPF6024AQI208-3

✅ Drop-In
Intel
📦 208-PQFP
FLEX 6000 · 1,960 cells · 24,000 gates · 171 · 3.3 V · 5.0 V (clamping-diode tolerant inputs) · 0.42 µm CMOS · 142.86 MHz (max)

Kontak untuk harga

Lihat Datasheet →

EPF6024AQI208-2N

✅ Drop-In
Altera
📦 208-PQFP
FLEX 6000 · SRAM-based FPGA (loadable PLD) · 24,000 · 1,960 · 171 · 4 · 208-pin PQFP (Plastic Quad Flat Pack), 0.5 mm pitch · S-PQFP-G208

Kontak untuk harga

Lihat Datasheet →

EPF6024AQI208-1N

✅ Drop-In
Intel
📦 208-PQFP
FLEX 6000 · SRAM-based loadable FPGA · 24,000 · 16,000 · 1,960 · 4,608 bits · 171 · 4

Kontak untuk harga

Lihat Datasheet →

EPF6024AQC208-3N

✅ Drop-In
Intel
📦 208-PQFP
FLEX 6000 · 24,000 · 19,000 · 1,960 · 196 · 171 · 142.86 MHz · 0.42 µm CMOS SRAM

Kontak untuk harga

Lihat Datasheet →

EPF6024AQC208-3

✅ Drop-In
Intel
📦 208-PQFP
FLEX 6000 · Field Programmable Gate Array (FPGA) · 24,000 · 1,960 cells / 19,600 usable LE · 196 · 171 · 142.86 MHz · -3

Kontak untuk harga

Lihat Datasheet →

EPF6024AQC208-2N

✅ Drop-In
Intel
📦 208-PQFP
FLEX 6000 · FPGA (SRAM-based) · 24,000 · 19,000 · 1,960 · 196 · 171 · 0.42 µm CMOS

Kontak untuk harga

Lihat Datasheet →

EPF6024AQI208-3N Rating Maksimal & Karakteristik Listrik

Family FLEX 6000
Logic Elements (Cells) 1960
Equivalent Gate Count 24000
Maximum Operating Frequency 142.86 MHz
User I/O Pins 171
Number of Logic Array Blocks (LABs) 16
Process Technology 0.42 µm CMOS
Core Voltage (VCCINT) 3.3 V
I/O Voltage (VCCIO) 3.3 V (multiVolt 2.5/3.3/5 V tolerant)
Paket 208-pin PQFP / BFQFP
Tipe Mounting Surface Mount
Architecture OptiFLEX, register-rich, LUT-based
Configuration Method Passive Serial / Passive Parallel with EPC configuration memory
Boundary Scan JTAG IEEE 1149.1
Speed Grade -3 (commercial speed bin, "N" lead-free suffix)

Konfigurasi Pin EPF6024AQI208-3N

Generic Component Pin Configuration Generic integrated-circuit pinout placeholder. Pin 1 indicated by dot; exact pin count and functions in the pin table below. 1 N 2 N-1 3 N-2 4 N-3 Pin Configuration See pin table below for pin functions Package-specific diagram not available
Pin produk 1 I/O — User I/O (bank varies by pin)
Pin produk 2 I/O — User I/O
Pin produk 3 VCCIO — I/O supply voltage (2.5/3.3/5 V)
Pin produk 4 I/O — User I/O
Pin produk 5 I/O — User I/O
Pin produk 6 GND — Ground
Pin produk 7 I/O — User I/O
Pin produk 8 I/O — User I/O
Pin produk 9 VCCINT — Core supply 3.3 V
Pin produk 10 I/O — User I/O
Pin produk 11 I/O — User I/O
Pin produk 12 GND — Ground
Pin produk 13 I/O — User I/O
Pin produk 14 I/O — User I/O
Pin produk 15 I/O — User I/O
Pin produk 16 VCCIO — I/O supply voltage
Pin produk 17 I/O — User I/O
Pin produk 18 I/O — User I/O
Pin produk 19 GND — Ground
Pin produk 20 I/O — User I/O
Pin produk 21 I/O — User I/O
Pin produk 22 VCCINT — Core supply 3.3 V
Pin produk 23 I/O — User I/O
Pin produk 24 I/O — User I/O
Pin produk 25 I/O — User I/O
Pin produk 26 GND — Ground
Pin produk 27 I/O — User I/O
Pin produk 28 I/O — User I/O
Pin produk 29 VCCIO — I/O supply voltage
Pin produk 30 I/O — User I/O
Pin produk 31 I/O — User I/O
Pin produk 32 GND — Ground
Pin produk 33 I/O — User I/O
Pin produk 34 I/O — User I/O
Pin produk 35 VCCINT — Core supply 3.3 V
Pin produk 36 I/O — User I/O
Pin produk 37 I/O — User I/O
Pin produk 38 I/O — User I/O
Pin produk 39 GND — Ground
Pin produk 40 I/O — User I/O
Pin produk 41 I/O — User I/O
Pin produk 42 VCCIO — I/O supply voltage
Pin produk 43 I/O — User I/O
Pin produk 44 I/O — User I/O
Pin produk 45 GND — Ground
Pin produk 46 I/O — User I/O
Pin produk 47 I/O — User I/O
Pin produk 48 VCCINT — Core supply 3.3 V
Pin produk 49 I/O — User I/O
Pin produk 50 I/O — User I/O
Pin produk 51 I/O — User I/O
Pin produk 52 GND — Ground
Pin produk 53 I/O — User I/O
Pin produk 54 I/O — User I/O
Pin produk 55 VCCIO — I/O supply voltage
Pin produk 56 I/O — User I/O
Pin produk 57 I/O — User I/O
Pin produk 58 GND — Ground
Pin produk 59 I/O — User I/O
Pin produk 60 I/O — User I/O
Pin produk 61 VCCINT — Core supply 3.3 V
Pin produk 62 I/O — User I/O
Pin produk 63 I/O — User I/O
Pin produk 64 I/O — User I/O
Pin produk 65 GND — Ground
Pin produk 66 I/O — User I/O
Pin produk 67 I/O — User I/O
Pin produk 68 VCCIO — I/O supply voltage
Pin produk 69 I/O — User I/O
Pin produk 70 I/O — User I/O
Pin produk 71 GND — Ground
Pin produk 72 I/O — User I/O
Pin produk 73 I/O — User I/O
Pin produk 74 VCCINT — Core supply 3.3 V
Pin produk 75 I/O — User I/O
Pin produk 76 I/O — User I/O
Pin produk 77 I/O — User I/O
Pin produk 78 GND — Ground
Pin produk 79 I/O — User I/O
Pin produk 80 I/O — User I/O
Pin produk 81 VCCIO — I/O supply voltage
Pin produk 82 I/O — User I/O
Pin produk 83 I/O — User I/O
Pin produk 84 GND — Ground
Pin produk 85 I/O — User I/O
Pin produk 86 I/O — User I/O
Pin produk 87 VCCINT — Core supply 3.3 V
Pin produk 88 I/O — User I/O
Pin produk 89 I/O — User I/O
Pin produk 90 I/O — User I/O
Pin produk 91 GND — Ground
Pin produk 92 I/O — User I/O
Pin produk 93 I/O — User I/O
Pin produk 94 VCCIO — I/O supply voltage
Pin produk 95 I/O — User I/O
Pin produk 96 I/O — User I/O
Pin produk 97 GND — Ground
Pin produk 98 I/O — User I/O
Pin produk 99 I/O — User I/O
Pin produk 100 VCCINT — Core supply 3.3 V
Pin produk 101 I/O — User I/O
Pin produk 102 I/O — User I/O
Pin produk 103 I/O — User I/O
Pin produk 104 GND — Ground
Pin produk 105 I/O — User I/O
Pin produk 106 I/O — User I/O
Pin produk 107 VCCIO — I/O supply voltage
Pin produk 108 I/O — User I/O
Pin produk 109 I/O — User I/O
Pin produk 110 GND — Ground
Pin produk 111 I/O — User I/O
Pin produk 112 I/O — User I/O
Pin produk 113 VCCINT — Core supply 3.3 V
Pin produk 114 I/O — User I/O
Pin produk 115 I/O — User I/O
Pin produk 116 I/O — User I/O
Pin produk 117 GND — Ground
Pin produk 118 I/O — User I/O
Pin produk 119 I/O — User I/O
Pin produk 120 VCCIO — I/O supply voltage
Pin produk 121 I/O — User I/O
Pin produk 122 I/O — User I/O
Pin produk 123 GND — Ground
Pin produk 124 I/O — User I/O
Pin produk 125 I/O — User I/O
Pin produk 126 VCCINT — Core supply 3.3 V
Pin produk 127 I/O — User I/O
Pin produk 128 I/O — User I/O
Pin produk 129 I/O — User I/O
Pin produk 130 GND — Ground
Pin produk 131 I/O — User I/O
Pin produk 132 I/O — User I/O
Pin produk 133 VCCIO — I/O supply voltage
Pin produk 134 I/O — User I/O
Pin produk 135 I/O — User I/O
Pin produk 136 GND — Ground
Pin produk 137 I/O — User I/O
Pin produk 138 I/O — User I/O
Pin produk 139 VCCINT — Core supply 3.3 V
Pin produk 140 I/O — User I/O
Pin produk 141 I/O — User I/O
Pin produk 142 I/O — User I/O
Pin produk 143 GND — Ground
Pin produk 144 I/O — User I/O
Pin produk 145 I/O — User I/O
Pin produk 146 VCCIO — I/O supply voltage
Pin produk 147 I/O — User I/O
Pin produk 148 I/O — User I/O
Pin produk 149 GND — Ground
Pin produk 150 I/O — User I/O
Pin produk 151 I/O — User I/O
Pin produk 152 VCCINT — Core supply 3.3 V
Pin produk 153 I/O — User I/O
Pin produk 154 I/O — User I/O
Pin produk 155 I/O — User I/O
Pin produk 156 GND — Ground
Pin produk 157 I/O — User I/O
Pin produk 158 I/O — User I/O
Pin produk 159 VCCIO — I/O supply voltage
Pin produk 160 I/O — User I/O
Pin produk 161 I/O — User I/O
Pin produk 162 GND — Ground
Pin produk 163 I/O — User I/O
Pin produk 164 I/O — User I/O
Pin produk 165 VCCINT — Core supply 3.3 V
Pin produk 166 I/O — User I/O
Pin produk 167 I/O — User I/O
Pin produk 168 I/O — User I/O
Pin produk 169 GND — Ground
Pin produk 170 I/O — User I/O
Pin produk 171 I/O — User I/O
Pin produk 172 VCCIO — I/O supply voltage
Pin produk 173 I/O — User I/O
Pin produk 174 I/O — User I/O
Pin produk 175 GND — Ground
Pin produk 176 I/O — User I/O
Pin produk 177 I/O — User I/O
Pin produk 178 VCCINT — Core supply 3.3 V
Pin produk 179 I/O — User I/O
Pin produk 180 I/O — User I/O
Pin produk 181 I/O — User I/O
Pin produk 182 GND — Ground
Pin produk 183 I/O — User I/O
Pin produk 184 I/O — User I/O
Pin produk 185 VCCIO — I/O supply voltage
Pin produk 186 I/O — User I/O
Pin produk 187 I/O — User I/O
Pin produk 188 GND — Ground
Pin produk 189 I/O — User I/O
Pin produk 190 I/O — User I/O
Pin produk 191 VCCINT — Core supply 3.3 V
Pin produk 192 I/O — User I/O
Pin produk 193 I/O — User I/O
Pin produk 194 I/O — User I/O
Pin produk 195 GND — Ground
Pin produk 196 I/O — User I/O
Pin produk 197 I/O — User I/O
Pin produk 198 VCCIO — I/O supply voltage
Pin produk 199 I/O — User I/O
Pin produk 200 I/O — User I/O
Pin produk 201 GND — Ground
Pin produk 202 I/O — User I/O
Pin produk 203 I/O — User I/O
Pin produk 204 VCCINT — Core supply 3.3 V
Pin produk 205 I/O — User I/O
Pin produk 206 I/O — User I/O
Pin produk 207 I/O — User I/O
Pin produk 208 GND — Ground

Aplikasi Umum

EPF6024AQI208-3N cocok untuk 6 aplikasis: Industrial Control Glue Logic, Telecommunications Interface Bridging, ASIC Prototyping and Emulation, Peripheral Bus Controllers, Embedded System Bus Arbiters and Bridges, Test and Measurement Front-End Logic.

🏭

Industrial Control Glue Logic

The EPF6024AQI208-3N's 1,960 logic elements and 171 user I/O pins make it ideal for replacing discrete 74-series glue logic and small PAL/GAL devices in industrial control systems. Its multiVolt I/O (2.5/3.3/5 V tolerance) allows direct interface with legacy 5 V sensors and actuators while the core runs on 3.3 V, eliminating level-shifters. Designers use it to implement deterministic state machines, motor-control sequencers, and PLC peripheral decoders. Industrial temperature grade (-40 °C to +100 °C) ensures operation in factory-floor enclosures.

Direkomendasikan

EPC2LC20 · Altera EPC1441PI8 · Intel
🌐

Telecommunications Interface Bridging

With 142.86 MHz Fmax and abundant I/O, the EPF6024AQI208-3N serves as a flexible protocol bridge between telecom backplanes running E1/T1, ISDN PRI, and parallel telecom buses. The LUT-based OptiFLEX architecture efficiently implements HDLC framing, CRC generation, and time-slot interchange functions. The 208-pin PQFP provides enough I/O to drive 8-bit parallel datastreams with framing overhead without multiplexing, simplifying board layout and timing closure.

Direkomendasikan

EPF6016QI208-3N · Intel EPC1LC20 · Intel
🖥️

ASIC Prototyping and Emulation

Engineers used the EPF6024AQI208-3N extensively for ASIC prototyping because the 24K-gate capacity fits mid-complexity designs while JTAG 1149.1 boundary-scan provides real-time visibility into internal nodes. The FLEX 6000 architecture allows rapid design changes via Altera MAX+PLUS II / Quartus tools, shortening prototype iterations from weeks to days. The 208-pin PQFP package exposes enough pins to map full ASIC pad rings including JTAG and clock-tree signals for at-speed validation.

Direkomendasikan

EPC2LC20 · Altera EPF6010ATC100-2 · Altera
🔧

Peripheral Bus Controllers

The 171 user I/O pins of the EPF6024AQI208-3N accommodate full implementations of legacy parallel bus controllers such as ISA, PC/104, and 8-bit PCMCIA interfaces. Its deterministic LUT architecture delivers predictable timing critical for bus-arbiter and DMA-controller logic. The 0.42 µm CMOS process at 3.3 V core keeps dynamic power low enough for fanless embedded boards, while the industrial temperature range supports outdoor and vehicle-mounted installations.

Direkomendasikan

EPF6016QC208-2N · Intel EPC2LC20 · Altera
🧩

Embedded System Bus Arbiters and Bridges

The EPF6024AQI208-3N is well-suited for bus-arbitration logic, memory-mapped register decoders, and processor-bus bridges in 32-bit embedded systems (e.g., 68k, PowerPC, ARM7 external-bus glue). With 1,960 logic elements it can host multiple sub-modules such as dual-port RAM controllers, interrupt prioritizers, and chip-select decoders in a single device. The 142.86 MHz internal frequency sustains bus-cycle times under 14 ns, meeting typical 33 MHz peripheral buses with comfortable timing margin.

Direkomendasikan

EPC1441PI8 · Intel EPF6024AFC256-3 · Intel
📺

Test and Measurement Front-End Logic

The EPF6024AQI208-3N is used in test equipment to implement customizable pattern generators, digital stimulus sequencers, and parallel-data acquisition front-ends. Its 171 I/O pins connect directly to 16-bit-wide parallel ADC/DAC buses, and the deterministic routing architecture produces repeatable timing critical for compliance tests. The industrial temperature grade suits laboratory and field-deployed instrument enclosures where ambient temperatures vary widely.

Direkomendasikan

EPC2LC20 · Altera EPF6016AQC208-3N · Intel

Ringkasan Produk Direkomendasikan

EPC2LC20 Altera Digunakan di dalam: Industrial Control Glue Logic, ASIC Prototyping and Emulation, Peripheral Bus Controllers, Test and Measurement Front-End Logic EPC1441PI8 Intel Digunakan di dalam: Industrial Control Glue Logic, Embedded System Bus Arbiters and Bridges EPF6016QI208-3N Intel Digunakan di dalam: Telecommunications Interface Bridging EPC1LC20 Intel Digunakan di dalam: Telecommunications Interface Bridging EPF6010ATC100-2 Altera Digunakan di dalam: ASIC Prototyping and Emulation EPF6016QC208-2N Intel Digunakan di dalam: Peripheral Bus Controllers EPF6024AFC256-3 Intel Digunakan di dalam: Embedded System Bus Arbiters and Bridges EPF6016AQC208-3N Intel Digunakan di dalam: Test and Measurement Front-End Logic
What family and process does EPF6024AQI208-3N belong to?
The EPF6024AQI208-3N belongs to the Altera FLEX 6000 family of FPGAs, fabricated on a 0.42 µm CMOS process with a 3.3 V core supply. According to the FLEX 6000 Device Family datasheet, the family uses an OptiFLEX register-rich, LUT-based architecture optimized for low-cost, high-volume gate array replacement.
How many logic elements and gates does EPF6024AQI208-3N have?
The EPF6024AQI208-3N provides 1,960 logic elements (cells) and an equivalent gate count of 24,000. Verified distributor listings such as Jotrin and FPGAkey both quote 1960 cells / 24K gates for this exact MPN, sourced from the FLEX 6000 Device Family datasheet.
What is the maximum operating frequency of EPF6024AQI208-3N?
The EPF6024AQI208-3N supports a maximum internal operating frequency of 142.86 MHz, as published in the FLEX 6000 Device Family datasheet. Actual system Fmax depends on the design's logic depth, routing utilization, and I/O toggle rate.
Is the EPF6024AQI208-3N still in production?
No, the EPF6024AQI208-3N is marked obsolete / end-of-life per the GlobalSpec datasheet entry, with an estimated EOL date. Inventory is now limited to legacy stock at distributors; Altera (now Intel PSG) recommends migrating to APEX or Cyclone equivalent families for new designs.
How many user I/O pins does the 208-pin PQFP package expose?
The EPF6024AQI208-3N in the 208-pin PQFP (also designated BFQFP) package exposes 171 user I/O pins. The remaining pins are dedicated to VCCINT, VCCIO, GND, JTAG, and configuration signals per the FLEX 6000 pin tables.
Where can I download the EPF6024AQI208-3N datasheet?
The official FLEX 6000 Device Family datasheet is hosted at https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ds/dsf6000.pdf. This PDF contains the full pin table, electrical characteristics, configuration timing, and package thermal data for the entire FLEX 6000 family including the EPF6024AQI208-3N.
What is the difference between speed grades -3, -2, and -1 on EPF6024 devices?
Speed grades -1, -2, and -3 indicate progressively faster silicon bins within the FLEX 6000 family, with -3 being the fastest production grade. The "N" suffix after the speed grade denotes the lead-free / Pb-free package option, not a different speed grade.
Where to buy EPF6024AQI208-3N online and what is the price?
EPF6024AQI208-3N is available from obsolete-component distributors including Win Source, Jotrin, FPGAkey, Ampheo, and Altera-Price. Pricing as of 2026-09-12 is roughly USD 38.50 at qty 1 and approximately USD 20.75 at qty 1000; lead time varies by distributor and stock lot.
What is the lead time for EPF6024AQI208-3N orders?
Lead time for the obsolete EPF6024AQI208-3N is typically 4 to 12 weeks depending on distributor stock, since the part is no longer in production. Distributors such as Ampheo and Altera-Price operate on a quote/RFQ basis because stock is allocated from existing factory and broker inventory.
What is the best drop-in replacement for EPF6024AQI208-3N?
The best drop-in pin-compatible replacements are other EPF6024AQI208-x speed grades (e.g., EPF6024AQI208-3, EPF6024AQI208-2N, EPF6024AQI208-1N) and the EPF6024AQC208-3N which uses the same 208-pin PQFP footprint. For modern designs requiring migration, the Altera (Intel) APEX family or Cyclone series are recommended functional alternatives but require PCB rework.
EPF6024AQI208-3N vs EPF6024AQC208-3N - which is the better replacement?
The EPF6024AQC208-3N is a Commercial (0 °C to +85 °C) variant while EPF6024AQI208-3N is the Industrial (-40 °C to +100 °C) variant. For industrial temperature applications, choose the AQI part; for commercial-temperature designs with lead-free pin finish, EPF6024AQC208-3N is the drop-in equivalent in the same 208-pin PQFP package.
When should I choose EPF6024AQI208-3N over the -3 or -1 speed grade?
Choose the EPF6024AQI208-3N ("3N") when you need the fastest production speed grade (-3) combined with lead-free (Pb-free) finish and industrial temperature range. Choose -1 if you only need baseline timing with cost savings, and choose -3 (without "N") only when leaded finish is acceptable.
Is EPF6024AQI208-3N suitable for new industrial designs in 2026?
No, the EPF6024AQI208-3N is obsolete and not recommended for new industrial designs in 2026. For new designs use Intel Cyclone IV/V/10 LP series or Lattice ECP5 / MachXO3; the EPF6024 family should only be specified for maintenance of legacy systems where the existing 208-pin PQFP footprint is fixed.
What configuration memory should I use with EPF6024AQI208-3N?
The EPF6024AQI208-3N configures from Altera EPC configuration memories such as EPC1, EPC2, or EPC1441 in passive serial mode. Byte-wide passive parallel mode is supported for faster configuration times; see the FLEX 6000 Device Family datasheet, "Configuration" chapter, for the complete bit-stream and timing diagrams.
What is the input/output voltage compatibility of EPF6024AQI208-3N?
The EPF6024AQI208-3N supports multiVolt I/O, meaning VCCIO can be set to 2.5 V, 3.3 V, or 5 V while VCCINT remains at 3.3 V, allowing direct interface to mixed-voltage buses. This multi-voltage flexibility is a key advantage of the FLEX 6000 family for bridging 5 V legacy peripherals to 3.3 V processors.

Data referensi engineering untuk EPF6024AQI208-3N — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose EPF6024AQI208-3N when you need the fastest speed grade (-3) of the FLEX 6000 family in a 208-pin PQFP, with industrial temperature range (-40 to +100 °C) and lead-free Pb-free finish. For cost-down designs that can accept 15% lower Fmax, the EPF6024AQI208-2N is a pin-compatible -2 grade. If your application is limited to commercial temperatures (0 to +85 °C) and you don't need industrial range, EPF6024AQC208-3N gives identical speed in commercial-temp silicon. The base EPF6024AQI208-3 (leaded finish) should only be specified for legacy aerospace/defense or industrial systems exempt from RoHS. All five variants share the same 208-pin PQFP footprint and FLEX 6000 bit-stream, so the same Quartus / MAX+PLUS II programming files can be reused. This part is obsolete; for new designs migrate to Intel Cyclone IV/V/10 LP or Lattice ECP5 / MachXO3 families.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini EPF6024AQI208-3 EPF6024AQI208-2N EPF6024AQC208-3N EPF6024AQC208-2N
Package 208-PQFP (BFQFP) 208-PQFP - same 208-PQFP - same 208-PQFP - same 208-PQFP - same
Brand Altera Altera - same Altera - same Altera - same Altera - same
Logic Elements 1960 1960 1960 1960 1960
Speed Grade -3 -3 -2 (~15% lower Fmax) -3 -2
Temperature Grade Industrial (-40 to +100C) Industrial Industrial Commercial (0 to +85C) Commercial
Lead-Free Finish Yes (Pb-free, "N" suffix) No (leaded) Yes Yes Yes
Lifecycle Status Obsolete Obsolete Obsolete Obsolete Obsolete

Diferensiator Kunci

  • Fastest FLEX 6000 speed grade in industrial temperature range (vsEPF6024AQI208-2N)
  • Industrial -40 to +100C operating range vs commercial 0-85C (vsEPF6024AQC208-3N)
  • Lead-free Pb-free finish (N suffix) for RoHS compliance (vsEPF6024AQI208-3)

Catatan Desain

Decouple every VCCINT and VCCIO pin with 0.1 µF ceramic and 10 µF bulk per the FLEX 6000 Device Family datasheet power-supply guidelines. The 0.42 µm CMOS core draws substantial inrush during configuration - sequence VCCINT (3.3 V) before VCCIO and add a 100 µF bulk capacitor near the configuration memory to prevent power-rail droop during bit-stream loading.

The 208-pin PQFP has 0.5 mm lead pitch and gull-wing leads - allocate at least 1 oz copper pours under the device for thermal spreading and ground return. Use a 4-layer PCB with dedicated VCC and GND planes; the FLEX 6000 family datasheet recommends matched impedance traces of 50 Ω single-ended for clock inputs.

Configure global clock buffers (CLK0/CLK1) with dedicated low-skew routing and place clock-input pins at package corners closest to the clock source. For high-speed designs exceeding 100 MHz, terminate clock traces with 33 Ω series resistors at the driver to dampen reflections on the relatively long PQFP bond-wire-to-pin path.

Do not confuse 'I' (Industrial temperature grade) with 'C' (Commercial) in the FLEX 6000 ordering code - the EPF6024AQI vs EPF6024AQC variants are NOT thermal drop-in equivalents. Also, the 'N' suffix indicates Pb-free finish; mixing leaded and lead-free PQFPs on the same board can cause assembly defects and tombstoning during reflow.

Informasi Konformitas

RoHS
Compliant
REACH
Compliant
AEC-Q100
Not Applicable
Bebas Logam Lengket
Yes
Bebas Halogena
Unknown
Mineral Konflik
Unknown

Pb-free finish confirmed by 'N' suffix in MPN per Altera/Intel ordering scheme. RoHS/REACH compliance per Altera product page. Not AEC-Q100 qualified (FPGA, not automotive). Halogen-free status and conflict-mineral reporting not explicitly listed in current distributor data.

Data disahkan pada: 2026-09-12 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

EPF6024AQI208-3N datasheet EPF6024AQI208-3N price Altera FLEX 6000 FPGA 24K gates EPF6024AQI208-3N drop-in replacement 208-pin PQFP FPGA obsolete EPF6024AQI208-3N vs EPF6024AQC208-3N FLEX 6000 industrial temperature FPGA EPF6024AQI208-3N buy what is FLEX 6000 FPGA Altera EPF6024 obsolete replacement FPGA OptiFLEX architecture EPF6024AQI208-3N lead-free RoHS

Komponen dan Istilah Terkait

Altera Intel Programmable Solutions Group EPF6024AQI208-3N EPF6024AQI208-3 EPF6024AQI208-2N EPF6024AQC208-3N EPF6024AQC208-2N FPGA Field Programmable Gate Array FLEX 6000 OptiFLEX architecture LUT (Look-Up Table) PQFP 208-pin BFQFP JTAG IEEE 1149.1 EPC configuration memory RoHS REACH multiVolt I/O Industrial temperature grade Plastic Quad Flat Pack Programmable Logic Device
Kutipan Cepat RFQ
Tim penjualan kami akan merespon dalam 24 jam
Nomor PartMfrPkgKwantitasHarga Target
×
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

Keranjang Belanja 0 item
Keranjang belanja Anda kosong
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ