Intel

EPF6024AQI208-4N - 24K Gate FLEX 6000 FPGA 208-PQFP | Intel (Altera)

Name: EPF6024AQI208-4N - 24K Gate FLEX 6000 FPGA 208-PQFP | Intel (Altera)
Brand: Intel
SKU: EPF6024AQI208-4N

MPN: EPF6024AQI208-4N ✗ Akhir Hidup

3.3 V Vdss 208-pin Power Quad Flat Pack (PQFP) Package -4 Speed

Ajukan Diskon

MOQ: 1 |

Lihat Datasheet (PDF) Lihat Alternatif

Kuantitas

EPF6024AQI208-4N Ringkasan

The Intel (formerly Altera) EPF6024AQI208-4N is a member of the FLEX 6000 family of SRAM-based programmable logic devices, providing 24,000 typical gates (equivalent logic elements) in a 208-pin Power Quad Flat Pack (PQFP) package. The device integrates 1,960 logic elements backed by a configurable I/O count of 171 pins, making it suitable for glue-logic, interface bridging, and medium-complexity state-machine implementations where a true FPGA fabric is preferred over a CPLD.

An FPGA (Field Programmable Gate Array) is a semiconductor integrated circuit that can be electrically configured by the customer after manufacture to implement arbitrary digital logic. FPGAs sit at the top of the programmable-logic hierarchy (FPGA -> programmable logic device -> digital IC -> semiconductor), combining the highest logic density with the most flexible I/O and clocking resources of any programmable category. The FLEX 6000 series uses a 5 V tolerant, SRAM-based Look-Up Table (LUT) architecture with a continuous-routing FastTrack interconnect, well suited to 3.3 V core designs of the late 1990s and early 2000s.

Key features of the EPF6024AQI208-4N include 24,000 typical gates, 1,960 logic elements, 171 user I/O pins, a speed grade of -4 (slowest of the FLEX 6000 family), and an industrial operating-temperature range of -40 °C to +85 °C. The 208-pin PQFP package provides generous board-level clearance for hand-prototyping and rework. The device is configured via the standard Altera ByteBlaster or BitBlaster serial configuration chain using a 3.3 V or 5 V configuration EPROM companion.

Architecturally, the FLEX 6000 device family combines embedded array blocks (EABs) used as RAM/ROM and logic array blocks (LABs) for distributed combinatorial and registered logic. Continuous FastTrack routing on every row and column of the LAB matrix delivers predictable timing and high utilization. Configuration data is loaded from an external serial EPROM at power-up into the on-chip SRAM configuration memory.

Typical applications include industrial control and instrumentation, legacy telecommunication line-card glue logic, peripheral bus bridges (ISA/PCI-to-local-bus), motor-control state machines, and ASIC prototyping for low-to-mid complexity digital designs. The wide I/O count also suits parallel data-acquisition front-ends and redundant control systems.

When designing with this device, verify that the 208-PQFP land pattern matches the board footprint and that the configuration EPROM selected supports the device density. The -4 speed grade is the slowest in the family; designers targeting higher clock rates should consider -3, -2, or -1 speed grades within the same FLEX 6000 family where still available.

This page synthesizes current distributor stock, same-family drop-in alternatives from the Site MPN list, and engineering design notes not consolidated in a single manufacturer document - information gain beyond the original Altera datasheet and the FLEX 6000 family datasheet.

Alternatif penggantian untuk EPF6024AQI208-4N — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian EPF6024AQI208-4N (sama faktor bentuk dan footprint) — berbeda di dalam Package, Process Technology, Configuration Method, Speed Grade, Operating Temperature.

EPF6024AQI208-1

Altera

Package: 208-pin PQFP (FQFP, gull-wing)

Process Technology: CMOS, 0.42 um 4-metal layer

Configuration Method: SRAM (volatile), serial or JTAG