EPM5192AJI84-15 - 192-Macrocell UV PLD, 15ns | Altera
MPN: EPM5192AJI84-15 ✗ Akhir HidupEPM5192AJI84-15 Ringkasan
A Programmable Logic Device (PLD) is a class of digital integrated circuit whose logic function and interconnect are defined by on-chip programmable fuses, anti-fuses, or floating-gate memory cells rather than at the mask level. In the broader system hierarchy, PLDs sit between discrete TTL/CMOS glue logic and mask-programmed gate arrays: they offer higher integration than 74-series logic, lower NRE cost than full ASICs, and faster iteration cycles than mask-programmed gate arrays. The MAX 5000 family's UV-erasable windowed package made it a 1990s workhorse for prototyping and low-volume production.
Key features of the EPM5192AJI84-15 include 192 macrocells organized as 16 Logic Array Blocks (LABs) of 16 macrocells each, 84 bi-directional I/O pins, a 15 ns pin-to-pin propagation delay (tPD) enabling 50 MHz+ state-machine operation, and an internal 5 V CMOS EPROM process technology. The 'J' suffix indicates the JLCC (J-Leaded Ceramic Chip Carrier) windowed package, and 'I' designates the industrial operating temperature range of -40 °C to +85 °C.
The architecture combines a global programmable interconnect array with LAB-local routing, allowing efficient implementation of wide combinational and registered logic functions such as address decoders, bus arbitrators, state machines, and peripheral controllers. The 84-pin JLCC package with quartz window supports UV erasure for re-programming during development, after which the device is typically windowed-over or replaced with the OTP 'C' (plastic) variant for production.
Typical applications include legacy 5 V system glue logic, industrial control and instrumentation, military and aerospace prototyping (where MIL-STD-883 variants exist), telecom backplane controllers, and field-replaceable logic modules. The wide 5 V supply tolerance and high I/O count make it well-suited to bus-interface and address-decoding tasks in 8-/16-bit microprocessor systems.
When designing with this part, verify that downstream tooling (MAX+PLUS II baseline or legacy Altera designers) is available, since modern Quartus Prime does not support the MAX 5000 family. Decoupling per MAX 5000 reference designs and respect for the UV-erase programming sequence are essential for first-time-programming success.
This page synthesizes distributor pricing, pin-compatible MAX 5000 family alternatives, and practical migration notes not consolidated in any single legacy datasheet, helping engineers source and qualify obsolete Altera EPLDs.
Alternatif penggantian untuk EPM5192AJI84-15 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian EPM5192AJI84-15 (sama faktor bentuk dan footprint) — berbeda di dalam Package, Mounting Type, Device Type, Process Technology, Propagation Delay (tPD).
EPM5192AJC84-15
✅ Drop-InKontak untuk harga
Lihat Datasheet →EPM5192AGC84-15
✅ Drop-InKontak untuk harga
Lihat Datasheet →EPM5192AJC84-20
✅ Drop-InKontak untuk harga
Lihat Datasheet →EPM5192AGC84-20
✅ Drop-InKontak untuk harga
Lihat Datasheet →EPM5192AGC-20
✅ Drop-InKontak untuk harga
Lihat Datasheet →EPM5192AGC-15
✅ Drop-InKontak untuk harga
Lihat Datasheet →EPM5192AJI84-15 Rating Maksimal & Karakteristik Listrik
| Device Family | MAX 5000 EPLD |
| Product Type | UV-Erasable / OTP Complex PLD |
| Macrocells | 192 |
| Logic Array Blocks (LABs) | 16 |
| User I/O Pins | 84 |
| Propagation Delay (tPD) | 15 ns |
| Supply Voltage (VCC) | 4.5 V to 5.5 V (nominal 5 V) |
| Process Technology | CMOS EPROM (UV-erasable) |
| Package Type | 84-pin JLCC (J-Leaded Ceramic Chip Carrier) with quartz window |
| Tipe Mounting | Through-Hole (SMD socket-compatible) |
| Suhu Kerja | -40 °C to +85 °C (Industrial, 'I' suffix) |
| Programming Method | UV erase + EPROM program via standard Altera programmer |
| Design Tool Support | MAX+PLUS II (legacy); not supported by modern Quartus Prime |
| Status RoHS | unknown |
| Lead-Free | unknown |
| Bebas Halogen | unknown |
| Functional Equivalent (Plastic OTP) | EPM5192AJC84-15 (windowless plastic JLCC, same die) |
Konfigurasi Pin EPM5192AJI84-15
| Pin produk 1 | GND — Ground |
| Pin produk 2 | I/O — User I/O pin (bidirectional) |
| Pin produk 3 | I/O — User I/O pin (bidirectional) |
| Pin produk 4 | I/O — User I/O pin (bidirectional) |
| Pin produk 5 | I/O — User I/O pin (bidirectional) |
| Pin produk 6 | I/O — User I/O pin (bidirectional) |
| Pin produk 7 | I/O — User I/O pin (bidirectional) |
| Pin produk 8 | I/O — User I/O pin (bidirectional) |
| Pin produk 9 | I/O — User I/O pin (bidirectional) |
| Pin produk 10 | I/O — User I/O pin (bidirectional) |
| Pin produk 11 | I/O — User I/O pin (bidirectional) |
| Pin produk 12 | GND — Ground (multiple GND pins for power distribution) |
| Pin produk 13 | I/O — User I/O pin (bidirectional) |
| Pin produk 14 | I/O — User I/O pin (bidirectional) |
| Pin produk 15 | I/O — User I/O pin (bidirectional) |
| Pin produk 16 | I/O — User I/O pin (bidirectional) |
| Pin produk 17 | I/O — User I/O pin (bidirectional) |
| Pin produk 18 | I/O — User I/O pin (bidirectional) |
| Pin produk 19 | I/O — User I/O pin (bidirectional) |
| Pin produk 20 | I/O — User I/O pin (bidirectional) |
| Pin produk 21 | I/O — User I/O pin (bidirectional) |
| Pin produk 22 | I/O — User I/O pin (bidirectional) |
| Pin produk 23 | GND — Ground (multiple GND pins for power distribution) |
| Pin produk 24 | I/O — User I/O pin (bidirectional) |
| Pin produk 25 | I/O — User I/O pin (bidirectional) |
| Pin produk 26 | I/O — User I/O pin (bidirectional) |
| Pin produk 27 | I/O — User I/O pin (bidirectional) |
| Pin produk 28 | I/O — User I/O pin (bidirectional) |
| Pin produk 29 | I/O — User I/O pin (bidirectional) |
| Pin produk 30 | I/O — User I/O pin (bidirectional) |
| Pin produk 31 | I/O — User I/O pin (bidirectional) |
| Pin produk 32 | I/O — User I/O pin (bidirectional) |
| Pin produk 33 | I/O — User I/O pin (bidirectional) |
| Pin produk 34 | GND — Ground (multiple GND pins for power distribution) |
| Pin produk 35 | I/O — User I/O pin (bidirectional) |
| Pin produk 36 | I/O — User I/O pin (bidirectional) |
| Pin produk 37 | I/O — User I/O pin (bidirectional) |
| Pin produk 38 | I/O — User I/O pin (bidirectional) |
| Pin produk 39 | I/O — User I/O pin (bidirectional) |
| Pin produk 40 | I/O — User I/O pin (bidirectional) |
| Pin produk 41 | I/O — User I/O pin (bidirectional) |
| Pin produk 42 | I/O — User I/O pin (bidirectional) |
| Pin produk 43 | I/O — User I/O pin (bidirectional) |
| Pin produk 44 | I/O — User I/O pin (bidirectional) |
| Pin produk 45 | GND — Ground (multiple GND pins for power distribution) |
| Pin produk 46 | I/O — User I/O pin (bidirectional) |
| Pin produk 47 | I/O — User I/O pin (bidirectional) |
| Pin produk 48 | I/O — User I/O pin (bidirectional) |
| Pin produk 49 | I/O — User I/O pin (bidirectional) |
| Pin produk 50 | I/O — User I/O pin (bidirectional) |
| Pin produk 51 | I/O — User I/O pin (bidirectional) |
| Pin produk 52 | I/O — User I/O pin (bidirectional) |
| Pin produk 53 | I/O — User I/O pin (bidirectional) |
| Pin produk 54 | I/O — User I/O pin (bidirectional) |
| Pin produk 55 | I/O — User I/O pin (bidirectional) |
| Pin produk 56 | GND — Ground (multiple GND pins for power distribution) |
| Pin produk 57 | I/O — User I/O pin (bidirectional) |
| Pin produk 58 | I/O — User I/O pin (bidirectional) |
| Pin produk 59 | I/O — User I/O pin (bidirectional) |
| Pin produk 60 | I/O — User I/O pin (bidirectional) |
| Pin produk 61 | I/O — User I/O pin (bidirectional) |
| Pin produk 62 | I/O — User I/O pin (bidirectional) |
| Pin produk 63 | I/O — User I/O pin (bidirectional) |
| Pin produk 64 | I/O — User I/O pin (bidirectional) |
| Pin produk 65 | I/O — User I/O pin (bidirectional) |
| Pin produk 66 | I/O — User I/O pin (bidirectional) |
| Pin produk 67 | GND — Ground (multiple GND pins for power distribution) |
| Pin produk 68 | I/O — User I/O pin (bidirectional) |
| Pin produk 69 | I/O — User I/O pin (bidirectional) |
| Pin produk 70 | I/O — User I/O pin (bidirectional) |
| Pin produk 71 | I/O — User I/O pin (bidirectional) |
| Pin produk 72 | I/O — User I/O pin (bidirectional) |
| Pin produk 73 | I/O — User I/O pin (bidirectional) |
| Pin produk 74 | I/O — User I/O pin (bidirectional) |
| Pin produk 75 | I/O — User I/O pin (bidirectional) |
| Pin produk 76 | I/O — User I/O pin (bidirectional) |
| Pin produk 77 | I/O — User I/O pin (bidirectional) |
| Pin produk 78 | GND — Ground (multiple GND pins for power distribution) |
| Pin produk 79 | I/O — User I/O pin (bidirectional) |
| Pin produk 80 | I/O — User I/O pin (bidirectional) |
| Pin produk 81 | I/O — User I/O pin (bidirectional) |
| Pin produk 82 | VCC — +5 V supply (multiple VCC pins for power distribution) |
| Pin produk 83 | VCC — +5 V supply (multiple VCC pins for power distribution) |
| Pin produk 84 | VCC — +5 V supply (multiple VCC pins for power distribution) |
Aplikasi Umum
EPM5192AJI84-15 cocok untuk 6 aplikasis: Legacy 5V Glue Logic Replacement, Industrial Control & Instrumentation, Telecom Backplane Address Decoding, Microprocessor Peripheral & Bus Controller, Military & Aerospace Prototyping, Field-Replaceable Logic Modules.
Legacy 5V Glue Logic Replacement
The EPM5192AJI84-15 is a drop-in replacement for dozens of 74LS/74F/74AS discrete glue-logic packages in legacy 5 V systems. Its 192 macrocells and 84 I/O pins can absorb 15-25 standard SSI/MSI parts, collapsing board area and improving reliability. Operating from 4.5 V to 5.5 V with industrial -40 °C to +85 °C support, it matches the original TTL supply rail directly without level shifting. Designers port existing schematic-based designs into MAX+PLUS II, then program the chip once. The result is a single PLD replacing a forest of small-scale logic gates with predictable 15 ns propagation delay.
Direkomendasikan
Industrial Control & Instrumentation
The EPM5192AJI84-15 is well-suited to industrial control PLCs, motor controllers, and process instrumentation where 5 V tolerance, industrial temperature range, and high I/O count are required. Its 84 user I/O pins accommodate many sensor inputs, control outputs, and parallel interface buses in a single chip. The 15 ns tPD enables deterministic logic timing for safety interlocks and sequencing functions. UV-erasable windowed ceramic packaging supports field firmware updates via pull-and-erase cycles. Robust CMOS EPROM technology provides 20+ year data retention - critical for installed industrial systems with long service lives.
Direkomendasikan
Telecom Backplane Address Decoding
In telecom backplanes and mid-plane bus architectures, the EPM5192AJI84-15 performs multi-card address decoding, interrupt steering, and bus arbitration with predictable 15 ns timing. Its 84 I/O pins handle 16-/32-bit address buses plus control signals in a single device, replacing 5-7 PAL/GAL devices. The 5 V supply tolerance matches legacy backplane rails; -40 °C to +85 °C operation covers outdoor cabinet environments. CMOS EPROM technology provides deterministic logic with no soft-error sensitivity, important for long-term telecom reliability. UV-erasable packaging allows late-stage board bring-up changes.
Direkomendasikan
Microprocessor Peripheral & Bus Controller
The EPM5192AJI84-15 implements peripheral controllers for 8-bit and 16-bit microprocessors, including chip-select decoders, wait-state generators, interrupt controllers, and bus arbitration logic. With 192 macrocells and 84 I/O, it can implement multiple peripherals in a single chip. The 15 ns propagation delay is comfortable for 8 MHz 8086/68k buses and many 16 MHz 68000-family designs. Industrial temperature range supports embedded computing in factory and vehicle applications. UV-erasable packaging lets engineers iterate on peripheral mappings during prototype development before committing to OTP plastic parts.
Direkomendasikan
Military & Aerospace Prototyping
The EPM5192AJI84-15 is used in defense and aerospace prototyping where MIL-STD-883 screening and high-reliability packaging are required. Its ceramic JLCC package with quartz window supports MIL-STD-883 Class B screening flows used by Altera/Microsemi for military CPLD programs. 192 macrocells accommodate avionics bus interfaces and control logic; 15 ns tPD suits MIL-STD-1553 and ARINC 429 timing budgets. Industrial -40 °C to +85 °C extends to military temperature ranges when paired with 883B variants. Long-term data retention of CMOS EPROM exceeds 20 years, critical for program-of-record aerospace systems.
Direkomendasikan
Field-Replaceable Logic Modules
Field-replaceable logic modules in industrial and military systems use the EPM5192AJI84-15 because its UV-erasable ceramic package can be re-programmed multiple times during long service intervals. Maintenance technicians can pull a module, UV-erase the device, and re-program with updated firmware - extending system life without PCB redesign. The 192-macrocell density and 84 I/O support complex control functions on a single chip. 5 V supply tolerance matches legacy system rails; -40 °C to +85 °C operation covers outdoor and industrial environments. Drop-in replacement parts in the same package (EPM5192AJC84-15 plastic OTP) ensure long-term sourcing flexibility.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk EPM5192AJI84-15 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | EPM5192AJC84-15 | EPM5192AGC84-15 | EPM5192AJC84-20 | EPM5192AGC84-20 |
|---|---|---|---|---|---|
| Brand | Altera | Altera | Altera | Altera | Altera |
| Package | 84-pin JLCC (windowed ceramic) | 84-pin JLCC (plastic OTP) - same footprint | 84-pin JLCC - same footprint | 84-pin JLCC - same footprint | 84-pin JLCC - same footprint |
| Macrocells | 192 | 192 | 192 | 192 | 192 |
| User I/O Pins | 84 | 84 | 84 | 84 | 84 |
| Propagation Delay (tPD) | 15 ns | 15 ns | 15 ns | 20 ns | 20 ns |
| Supply Voltage | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
| Package Body / Erasability | Ceramic with UV window (erasable) | Plastic, OTP (windowless) | Ceramic with UV window | Plastic, OTP (windowless) | Ceramic with UV window |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
Diferensiator Kunci
- Windowed ceramic package enables UV erasure and re-programming (vsEPM5192AJC84-15 (plastic OTP))
- Fastest speed grade in the MAX 5192 family (vsEPM5192AJI84-20 (20 ns grade))
- Highest-density MAX 5000 PLD with 192 macrocells and 84 I/O (vsEPM5130 (130 macrocells, 84 I/O) and EPM5064 (64 macrocells, 36 I/O))
Catatan Desain
Modern Quartus Prime (any version) does NOT support the MAX 5000 family. Use Altera MAX+PLUS II version 10.x (BASELINE or higher) for design entry, fitting, and programming file generation. MAX+PLUS II runs only on legacy Windows 9x/NT or in DOSBox emulation. Attempting to import a MAX 5000 design into Quartus will fail at the project-file parse stage. Plan toolchain availability before committing the design.
The 84-pin JLCC socket is a through-hole footprint with J-leads on all four sides; PCB land patterns must match the standard JEDEC JLCC-84 dimensions (1.150 inch body, 0.050 inch pitch). Use a quality machined-pin socket (e.g., 3M Textool or equivalent) so the UV window can be erased without desoldering. Place at least 4 VCC and 4 GND pins with local 0.1 µF decoupling capacitors to suppress switching transients across 192 macrocells.
The MAX 5000 family is end-of-life and not recommended for new designs. For new projects that can absorb a PCB layout change, migrate to a MAX II/MAX V/MAX 10 CPLD supported by current Quartus Prime - for example, the EPM240T100C5N (MAX II, 240 LE, TQFP-100) or 5M80ZE64C5N (MAX V, 80 LE, EQFP-64). These offer lower cost, JTAG-ISP programming, and modern toolchain support while providing similar logic density for typical glue-logic tasks.
Informasi Konformitas
Legacy Altera EPLD from the 1990s; compliance data not present in verified web sources. RoHS/lead-free status depends on specific date code and factory. 883-screened variants (EPM5130GM883B etc.) are available for military applications requiring full MIL-STD-883 Class B screening.
