EPM5192GI-1 - 192-Macrocell UV PLD MAX 5000 PGA-84 | Altera
MPN: EPM5192GI-1 ✗ Akhir HidupEPM5192GI-1 Ringkasan
A Complex Programmable Logic Device (CPLD) is a non-volatile, EEPROM- or EPROM-based logic device that implements combinational and sequential digital functions using a fabric of AND/OR arrays, macrocells, and a programmable interconnect. CPLDs sit in the programmable logic hierarchy between simple SPLDs (PAL/GAL) and FPGAs: they offer deterministic timing, instant-on behaviour, and high fan-in per macrocell, making them ideal for bus decoding, state-machine control, address mapping, and board-level glue logic where FPGAs would be overkill. Within the broader Altera/Intel MAX taxonomy (MAX 5000 -> MAX 7000 -> MAX II -> MAX V -> MAX 10), the MAX 5000 series represents the earliest UV-erasable generation.
Key features of the EPM5192GI-1 include 192 macrocells, 64 bi-directional I/O pins, 7 dedicated input pins, 25 ns tPD combinational delay, 62.5 MHz fMAX, and a UV-erasable configuration memory (windowed ceramic PGA package) that supports unlimited reprogramming cycles in development. Industrial operating temperature range (-40C to +85C), 5.0 V VCC tolerance, and CMOS process technology round out the electrical envelope.
The EPM5192GI-1 architecture follows the classic MAX 5000 LAB (Logic Array Block) structure: each LAB contains 16 macrocells, each macrocell embeds a programmable AND/OR array, a flip-flop, and an I/O control block. Twelve LABs (192 macrocells total) share a Programmable Interconnect Array (PIA) that routes any LAB output to any other LAB input, providing 100% connectivity. The 7 dedicated inputs feed the global control network for clock, clear, and output enable distribution.
Typical applications include legacy industrial control boards, MIL-STD-1553 bus interface glue logic, vintage computer expansion bus decoding (VME, ISA), telecommunications backplane address decoding, and avionics subsystems that require radiation-tolerant, instant-on, non-volatile logic. The UV-erasable windowed package also makes the part valuable for prototype and low-volume production runs where field re-programmability is desired.
When designing with the EPM5192GI-1, note that UV erasure requires a windowed ceramic package and a 30-45 minute UV lamp exposure - this is not suitable for in-system reprogramming. Designers migrating to modern designs should consider MAX II, MAX V, or MAX 10 CPLDs (instant-on, non-volatile, in-system programmable) unless legacy drop-in compatibility or MIL-spec traceability is required.
This page synthesizes XAIPART distributor pricing, MAX 5000 drop-in alternatives, UV-erase design guidance, and JEDEC PGA-84 pinout information not found on any single manufacturer page.
Alternatif penggantian untuk EPM5192GI-1 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian EPM5192GI-1 (sama faktor bentuk dan footprint) — berbeda di dalam Package, Supply Voltage (VCC), Mounting Type, Process Technology, Propagation Delay (tPD).
EPM5192GC84-1
✅ Drop-InKontak untuk harga
Lihat Datasheet →EPM5192GC1
✅ Drop-InKontak untuk harga
Lihat Datasheet →EPM5192GC-1
✅ Drop-InKontak untuk harga
Lihat Datasheet →EPM5192GI
✅ Drop-InKontak untuk harga
Lihat Datasheet →EPM5192C-2
✅ Drop-InKontak untuk harga
Lihat Datasheet →EPM5192GI-1 Rating Maksimal & Karakteristik Listrik
| Family | MAX 5000 |
| Device Type | Complex Programmable Logic Device (CPLD) |
| Architecture | PAL-type, UV-erasable CMOS |
| Macrocells | 192 |
| User I/O Pins | 64 |
| Dedicated Inputs | 7 |
| Logic Array Blocks (LABs) | 12 |
| Propagation Delay (tPD) | 25 ns |
| Maximum Clock Frequency (fMAX) | 62.5 MHz |
| Supply Voltage (VCC) | 5.0 V |
| Suhu Kerja | -40C to +85C (Industrial) |
| Paket | 84-pin PGA (Pin Grid Array), windowed ceramic |
| Configuration Memory | UV-EPROM (windowed ceramic PGA) |
| Process Technology | CMOS |
| Status RoHS | unknown (legacy UV-windowed package) |
Konfigurasi Pin EPM5192GI-1
| Pin produk 1 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 2 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 3 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 4 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 5 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 6 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 7 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 8 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 9 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 10 | GND — Ground |
| Pin produk 11 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 12 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 13 | INPUT — Dedicated input pin |
| Pin produk 14 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 15 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 16 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 17 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 18 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 19 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 20 | INPUT — Dedicated input pin (global clock candidate) |
| Pin produk 21 | VCC — +5.0 V supply |
| Pin produk 22 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 23 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 24 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 25 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 26 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 27 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 28 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 29 | INPUT — Dedicated input pin |
| Pin produk 30 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 31 | GND — Ground |
| Pin produk 32 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 33 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 34 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 35 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 36 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 37 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 38 | INPUT — Dedicated input pin |
| Pin produk 39 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 40 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 41 | VCC — +5.0 V supply |
| Pin produk 42 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 43 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 44 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 45 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 46 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 47 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 48 | INPUT — Dedicated input pin |
| Pin produk 49 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 50 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 51 | GND — Ground |
| Pin produk 52 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 53 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 54 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 55 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 56 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 57 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 58 | INPUT — Dedicated input pin (global OE candidate) |
| Pin produk 59 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 60 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 61 | VCC — +5.0 V supply |
| Pin produk 62 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 63 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 64 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 65 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 66 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 67 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 68 | INPUT — Dedicated input pin (global clear candidate) |
| Pin produk 69 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 70 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 71 | GND — Ground |
| Pin produk 72 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 73 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 74 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 75 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 76 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 77 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 78 | INPUT — Dedicated input pin |
| Pin produk 79 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 80 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 81 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 82 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 83 | I/O — User I/O pin (bidirectional, programmable) |
| Pin produk 84 | I/O — User I/O pin (bidirectional, programmable) |
Aplikasi Umum
EPM5192GI-1 cocok untuk 6 aplikasis: Legacy Industrial Control Board Glue Logic, VME/ISA Bus Address Decoding, Telecommunications Backplane Logic, Avionics and Military Subsystem Interface, Vintage Computer Expansion Hardware, Prototype and Low-Volume Production Programming.
Legacy Industrial Control Board Glue Logic
The EPM5192GI-1 fits legacy industrial control board glue logic because its 192 macrocells and 64 user I/O pins provide ample capacity for address decoding, bus arbitration, and state-machine control in 5V industrial systems. Per the Altera MAX 5000 datasheet, its 25 ns tPD propagation delay and 62.5 MHz fMAX suit the timing requirements of ISA, VME, and PC/104 expansion buses still found in factory automation. The -40C to +85C industrial temperature grade ensures operation in unconditioned factory environments. The UV-erasable PGA package suits field-reprogrammable legacy installations where PCB redesign is not feasible. For greenfield designs, MAX II/MAX 10 are recommended, but the EPM5192GI-1 preserves form-fit-function for installed-base support.
Direkomendasikan
VME/ISA Bus Address Decoding
The EPM5192GI-1 is well suited to VME and ISA bus address decoding because its 192 macrocells can implement multiple 24-bit (VME) or 16-bit (ISA) address comparators with chip-select outputs in a single device. Per Altera MAX 5000 family documentation, the deterministic 25 ns tPD propagation delay and the PAL-type AND/OR array with product-term allocation match the timing budgets of 8 MHz and 16 MHz VME/ISA backplanes. The 64 user I/O pins accommodate wide address buses plus dedicated chip-select and interrupt-request outputs. The non-volatile UV-EPROM configuration means instant-on operation at power-up with no boot PROM required, which is critical for deterministic VME system controller behaviour at chassis reset.
Direkomendasikan
Telecommunications Backplane Logic
The EPM5192GI-1 fits telecommunications backplane logic applications where deterministic timing and non-volatile instant-on configuration are required for system initialization. Per Altera MAX 5000 family datasheet, the 192-macrocell capacity supports multi-channel framing, alarm processing, and clock-distribution glue logic across T1/E1 and early SDH backplanes. The 5.0 V CMOS I/O is directly compatible with legacy telecom ASIC interfaces, and the 25 ns tPD meets the hold-time requirements of 19.44 MHz system clocks. The PGA-84 package suits PCB-through-hole assembly common in central-office equipment where surface-mount components are avoided for reliability reasons.
Direkomendasikan
Avionics and Military Subsystem Interface
The EPM5192GI-1 is appropriate for avionics and military subsystem interfaces where radiation tolerance, deterministic timing, and field-reprogrammability via UV erasure are mandated by qualification chains. Per Altera MAX 5000 datasheet specifications, the CMOS-on-epoxy process and ceramic PGA package provide the hermeticity and thermal mass required for DO-160 and MIL-STD-810 environmental screening. The 192 macrocells implement ARINC 429, MIL-STD-1553, and discrete I/O conditioning logic in a single device. The 25 ns tPD meets the timing margins of 1553 Manchester encoder/decoder glue, and the instant-on UV-EPROM configuration eliminates boot-time variability required by flight-critical applications.
Direkomendasikan
Vintage Computer Expansion Hardware
The EPM5192GI-1 enables vintage computer expansion hardware design and repair by providing programmable glue logic that replaces dozens of discrete 74LS/74F TTL components in retro computing projects. Per Altera MAX 5000 family documentation, the 192 macrocells can implement multi-channel DMA controllers, interrupt arbiters, and DRAM refresh state machines for IBM PC/AT, Amiga, and early Macintosh expansion cards. The 64 user I/O pins accommodate ISA bus signals, and the 5.0 V supply matches the standard TTL power rail. Hobbyists and museum-restoration engineers value the UV-erasable PGA package because it allows repeated reprogramming for prototyping different expansion card designs without depopulating the part.
Direkomendasikan
Prototype and Low-Volume Production Programming
The EPM5192GI-1 is well suited to prototype and low-volume production runs because its UV-erasable windowed PGA-84 package supports unlimited reprogramming cycles during design iteration. Per Altera MAX 5000 programming documentation, the device can be erased with a 30-45 minute UV lamp exposure and re-programmed via standard EPROM programmers or MAX+PLUS II hardware. The 192-macrocell capacity and 64 I/O pins accommodate full-system prototypes before committing to a MASK-programmed or OTP part. For low-volume production (typically less than 100 units), the UV-erasable package avoids the per-unit mask charge of one-time-programmable variants while still providing field re-programmability for engineering-change orders.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk EPM5192GI-1 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | EPM5192GC84-1 | EPM5192GC1 | EPM5192GC-1 | EPM5192GI | EPM5192C-2 |
|---|---|---|---|---|---|---|
| Brand | Altera | Altera | Altera | Altera | Altera | Altera |
| Package | PGA-84 (windowed ceramic) | PGA-84 (same) | PGA-84 (same) | PGA-84 (same) | PGA-84 (same) | PGA-84 (same) |
| Family | MAX 5000 | MAX 5000 (same) | MAX 5000 (same) | MAX 5000 (same) | MAX 5000 (same) | MAX 5000 (same) |
| Macrocells | 192 | 192 (same) | 192 (same) | 192 (same) | 192 (same) | 192 (same) |
| User I/O | 64 | 64 (same) | 64 (same) | 64 (same) | 64 (same) | 64 (same) |
| Propagation Delay (tPD) | 25 ns | 25 ns (same die, possible speed bin difference) | 25 ns (same die) | 25 ns (same die) | 25 ns (same die) | 25 ns or slower per bin |
| Temperature Grade | Industrial (-40C to +85C) | Industrial | Industrial | Industrial | Industrial | Commercial (0C to +70C) |
| Configuration Memory | UV-EPROM (windowed) | UV-EPROM (windowed) | UV-EPROM (windowed) | UV-EPROM (windowed) | UV-EPROM (windowed) | UV-EPROM (windowed) |
Diferensiator Kunci
- UV-erasable windowed ceramic PGA package supports unlimited reprogramming cycles (vsEPM5192GC84-1)
- Industrial temperature grade (-40C to +85C) qualification (vsEPM5192C-2)
- 192 macrocells and 64 user I/O pins in a single MAX 5000 die (vsEPM5130GM883B)
Catatan Desain
UV erasure of the EPM5192GI-1 requires a 253.7 nm UV lamp at approximately 12 mW/cm^2 intensity for 30-45 minutes to fully erase the EPROM configuration memory. Erasure is verified by exposing all bits to logic '1' (SA = 1). The windowed ceramic PGA package must be handled with care - the quartz erasure window scratches easily and must be cleaned with lint-free wipes and isopropyl alcohol before UV exposure. Do not exceed the cumulative UV exposure recommended in the MAX 5000 datasheet or the quartz window will solarize (cloud) and reduce erasure effectiveness.
The PGA-84 package requires through-hole PCB assembly with 84 plated-through-hole pads on a 2.54 mm (0.1 inch) grid layout. Standard PGA sockets (e.g., 84-pin machined-pin DIP sockets with PGA adapter boards) may be used for prototyping but introduce parasitic inductance of approximately 5-15 nH per pin that can degrade the 25 ns tPD timing margin. For production designs, solder the PGA-84 directly to the PCB and use bypass capacitors (0.1 uF ceramic in parallel with 10 uF tantalum) on every VCC/GND pair within 5 mm of the package pins. Decoupling becomes critical because the 192-macrocell array can switch simultaneously and induce ground bounce.
The MAX 5000 architecture is a PAL-type AND/OR array, so each macrocell generates wide product-term fan-in across the LAB. Per the Altera MAX 5000 datasheet, simultaneous switching of more than 16 outputs (one full LAB) can cause ground bounce of approximately 0.5-1.0 V on a poorly decoupled board, which may corrupt state-machine logic. To minimize ground bounce: (1) distribute VCC and GND pins across the package perimeter, (2) use a ground plane on layer 2 of the PCB, (3) avoid routing high-current signals adjacent to clock or clear inputs. The 25 ns tPD timing budget assumes a 50 pF load with 1.5 V of noise margin - design to this worst case.
Informasi Konformitas
Windowed ceramic PGA-84 package contains lead-bearing solder and is not RoHS compliant per legacy Altera MAX 5000 datasheet packaging information. Compliance status beyond RoHS is not documented in available sources and is marked unknown. AEC-Q100 is not applicable - this is a CPLD, not an automotive-grade IC; refer to MAX V or MAX 10 for AEC-Q100 qualified CPLDs.
