KSZ8893FQLI-FX - 3-Port 10/100 Ethernet Switch | Microchip
MPN: KSZ8893FQLI-FX ✓ AktifKSZ8893FQLI-FX Ringkasan
An Ethernet switch controller is a semiconductor that combines multiple physical-layer transceivers and frame-handling logic into a local network interface. Within the hierarchy of network semiconductors, the KSZ8893 belongs to the Ethernet interface IC and Layer 2 switch-controller class. It provides a hardware-efficient way to connect embedded processors, industrial controllers, sensors, and communications equipment without requiring a separate Ethernet PHY for every copper or fiber endpoint.
Key features include three 10/100 transceivers, integrated 100BASE-FX support, MII and RMII interfaces, and I2C and SPI management interfaces. It operates from a 3.1 V to 3.5 V supply according to the product listing data. The 128-PQFP package provides ample I/O for a three-port managed switch and supports surface-mount manufacturing, while the tray packaging is intended for production-board assembly and automated insertion.
The KSZ8893 family is designed as a managed Layer 2 switch for low-port-count systems. Product information identifies rate limiting, port-based and tag-based VLAN, QoS priority, and management functions within the KSZ8893 feature set. These capabilities allow traffic segmentation and priority handling to be implemented close to the network edge, reducing dependence on a host processor for routine frame classification. Its MII and RMII connectivity also provides design flexibility across processors with different media-access-control interfaces.
Typical applications include industrial Ethernet gateways, factory automation controllers, serial-to-Ethernet equipment, embedded network appliances, instrumentation systems, and optical-network interfaces. The integrated 100BASE-FX capability is especially useful when a system must bridge short copper links to fiber infrastructure for longer-distance communications or electrical isolation. Three-port configurations also suit equipment that combines two external Ethernet connections with an internal processor uplink.
PCB design should preserve the power, clock, decoupling, and signal-integrity requirements shown in the manufacturer datasheet. Place all required supply capacitors close to their associated power pins, route RMII signals as a compact matched-length group, and keep high-speed clock and Ethernet traces away from noisy switching nodes. Verify thermal performance and power consumption at the system’s worst-case traffic and port-utilization conditions.
This page combines the manufacturer’s KSZ8893 product information with package, interface, management, application, and replacement guidance. It also organizes the most relevant drop-in candidates and identifies the practical trade-offs that matter when reusing an existing 128-PQFP Ethernet-switch layout.
Alternatif penggantian untuk KSZ8893FQLI-FX — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian KSZ8893FQLI-FX (sama faktor bentuk dan footprint) — berbeda di dalam Package, Product Type, VLAN Support, Network Layer, RoHS Compliance.
KSZ8893MQLI
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →KSZ8893MBLI
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →KSZ8895MQXI-TR
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
KSZ8895MQXC-TR
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
KSZ8895MQXCA
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
KSZ8893FQLI-FX Rating Maksimal & Karakteristik Listrik
| Product Type | 3-port managed 10/100 Mbps Ethernet switch controller |
| Number of Ports | 3 ports |
| Data Rates | 10 Mbps and 100 Mbps |
| Copper Ethernet Support | 10BASE-T and 100BASE-TX |
| Fiber Ethernet Support | 100BASE-FX |
| Host Interface | MII and RMII |
| Management Interface | I2C and SPI |
| Supply Voltage Range | 3.1 V to 3.5 V |
| Paket | 128-pin PQFP, 14 mm × 20 mm × 2.72 mm |
| Tipe Mounting | Surface mount |
| Packaging | Tray |
| Network Layer | Layer 2 Ethernet switching |
| VLAN Support | Port-based and tag-based VLAN |
| Traffic Management | Rate limiting and QoS priority |
| Rentang Suhu Kerja | -40 °C to +85 °C |
| RoHS Compliance | Compliant |
| Number of Transceivers | 3 transceivers |
| Ethernet Media Interfaces | I2C, MII, RMII, SMI, and SPI |
| Minimum Operating Supply Voltage | 1.2 V |
KSZ8893FQLI-FX 128-pin pqfp, 14 mm × 20 mm × 2.72 mm Diamant Konfigurasi Panduan
Konfigurasi pin untuk KSZ8893FQLI-FX (128-pin pqfp, 14 mm × 20 mm × 2.72 mm pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.
Tidak ada data diatribut pin yang tersedia untuk KSZ8893FQLI-FX.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
KSZ8893FQLI-FX cocok untuk 6 aplikasis: Industrial Ethernet Gateway, Copper-to-Fiber Network Bridge, Factory Automation Controller, Embedded Instrumentation, Network Appliance with Three Ports, Serial-to-Ethernet Equipment.
Industrial Ethernet Gateway
The KSZ8893FQLI-FX fits an industrial gateway requiring three 10/100 endpoints and a managed Layer 2 network segment. Its MII or RMII interface connects directly to a capable communications processor, while I2C or SPI provides configuration access for VLANs, QoS priority, and rate limiting. The 3.1 V to 3.5 V operating range fits a conventional 3.3 V industrial rail architecture, while the 128-PQFP package provides the pin count needed for three transceivers and management functions. Designers should verify clocking, magnetics, isolation, and reset requirements against the manufacturer reference circuit.
Direkomendasikan
Copper-to-Fiber Network Bridge
The KSZ8893FQLI-FX is suitable for equipment that must connect copper Ethernet devices to a 100BASE-FX fiber segment. Its integrated 100BASE-FX PHY removes the need for a stand-alone fiber PHY when the system otherwise satisfies the timing and isolation requirements of the KSZ8893 implementation. MII and RMII host connectivity lets the design retain a conventional processor-facing interface, while I2C or SPI supports startup configuration. The design must account for optical-module characteristics, loss-of-signal behavior, and the different media requirements of copper and fiber ports.
Direkomendasikan
Factory Automation Controller
The three-port architecture of the KSZ8893FQLI-FX allows a factory controller to combine an uplink with two local Ethernet endpoints in a single Layer 2 device. Managed-switch functions such as port-based or tag-based VLAN, rate limiting, and QoS priority help separate control, diagnostic, and service traffic without burdening the host controller with every frame-level decision. A 3.3 V system architecture matches the stated 3.1 V to 3.5 V supply range. In a factory environment, validate industrial temperature requirements, surge exposure, isolation strategy, grounding, and the creepage and clearance needed by the complete interface network.
Direkomendasikan
Embedded Instrumentation
The KSZ8893FQLI-FX can connect an embedded instrument to supervisory equipment and service endpoints through a single three-port switch. RMII provides a compact processor interface for systems with constrained connector space, while the integrated copper PHYs simplify link establishment with test stations or local service tools. Management access through I2C or SPI allows calibration and network-policy settings to be controlled by the instrument firmware. The 128-PQFP footprint is relatively substantial, so the enclosure and PCB outline must be planned around the 14 mm × 20 mm body while maintaining the required power and differential-signal layout.
Direkomendasikan
Network Appliance with Three Ports
The KSZ8893FQLI-FX is appropriate for compact network appliances that need three 10/100 Mbps service ports rather than a high-speed uplink. A processor-facing MII or RMII interface provides the data path, and I2C or SPI allows the appliance firmware to configure managed-switch behavior. The three integrated transceivers reduce external PHY count and can simplify synchronization compared with a collection of unrelated components. Because 10/100 Mbps limits aggregate traffic capacity, system architects should reserve the KSZ8893 for management, sensor, or legacy segments rather than high-throughput storage or backbone traffic.
Direkomendasikan
Serial-to-Ethernet Equipment
The KSZ8893FQLI-FX can serve as the network interface in serial-to-Ethernet converters, protocol gateways, and remote equipment terminals. The host processor connects through RMII or MII, while the three-port switch provides local service access and network extension through additional copper links. I2C or SPI allows firmware to establish VLAN segmentation and traffic priorities during initialization. A 100BASE-FX port can connect the converter to fiber infrastructure when distance or galvanic isolation is important. Designers should budget board area for the 128-PQFP device, Ethernet magnetics, connector isolation, and thermal dissipation under sustained port activity.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk KSZ8893FQLI-FX — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | KSZ8893MQLI | KSZ8893MBLI | KSZ8895MQXI-TR | KSZ8895MQXC-TR | KSZ8895MQXCA |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 128-pin PQFP, 14 mm × 20 mm | 128-pin PQFP | 128-pin PQFP | 128-pin PQFP | 128-pin PQFP | 128-pin PQFP |
| Ethernet Ports | 3 ports | 3-port family configuration | 3-port family configuration | 3 transceivers | 3 transceivers | 3 transceivers |
| Data Rate | 10 Mbps and 100 Mbps | 10 Mbps and 100 Mbps | 10 Mbps and 100 Mbps | 10 Mbps and 100 Mbps | 10 Mbps and 100 Mbps | 10 Mbps and 100 Mbps |
| Media Support | 10BASE-T, 100BASE-TX, and 100BASE-FX | KSZ8893 10/100 family media support; exact option configuration requires verification | KSZ8893 10/100 family media support; exact option configuration requires verification | 10BASE-FL, 10BASE-T, 100BASE-FX, 100BASE-SX, and 100BASE-TX | 10BASE-FL, 10BASE-T, 100BASE-FX, 100BASE-SX, and 100BASE-TX | 10BASE-FL, 10BASE-T, 100BASE-FX, 100BASE-SX, and 100BASE-TX |
| Host Interface | MII and RMII | MII and RMII family interfaces; exact configuration requires verification | MII and RMII family interfaces; exact configuration requires verification | I2C, MII, RMII, SMI, and SPI | I2C, MII, RMII, SMI, and SPI | I2C, MII, RMII, SMI, and SPI |
| Number of Transceivers | 3 transceivers | 3-port family configuration | 3-port family configuration | 3 transceivers | 3 transceivers | 3 transceivers |
| Special Features | 100BASE-FX, VLAN, rate limiting, and QoS priority | KSZ8893 family managed-switch features; exact option differences require verification | KSZ8893 family managed-switch features; exact option differences require verification | Advanced connectivity for industrial automation and control systems | Fast Ethernet switch with expanded media support | Fast Ethernet switch with expanded media support |
Diferensiator Kunci
- Integrated three-port 10/100 switching with explicit 100BASE-FX support (vsKSZ8895MQXC-TR)
- Established KSZ8893 family organization (vsKSZ8895MQXI-TR)
- Three integrated transceivers in a single 128-pin PQFP device (vsKSZ8851SNLI-TR)
- I2C, SPI, MII, and RMII integration (vsKSZ8873MLLI-TR)
Catatan Desain
Use the manufacturer reference layout and pin-description table to assign all 128 PQFP positions. Keep the 25 MHz or other required clock source close to the device, route differential pairs as controlled-impedance nets, and place Ethernet magnetics and protection components near their corresponding ports. Do not substitute an inferred pin map from a distributor page because power, ground, clock, reset, strap, and transceiver functions must follow the exact ordering code.
Follow the datasheet power-decoupling network and supply sequencing requirements without substituting arbitrary capacitor values. Place each required bulk and high-frequency capacitor at the corresponding rail pins with a short return path to the ground plane. The published 3.1 V to 3.5 V operating range applies to the target device, but internal rail generation and I/O voltage compatibility must be confirmed from the official electrical-characteristics tables before power-up.
Treat MII and RMII as synchronous high-speed interfaces even though their clock rates are lower than 1000BASE-T signaling. Route the RMII clock and associated data group with controlled geometry, minimize stub lengths, and keep switching-regulator and high-current paths away from the interface. Provide solid ground-plane continuity under the switch and use the reference schematic’s source-synchronous timing and impedance guidance.
Do not assume that equal PQFP-128 body sizes guarantee interchangeability. Before replacing KSZ8893FQLI-FX with a KSZ8895 candidate, compare every assigned pin, power rail, reset mechanism, clock source, strap configuration, port media support, management protocol, and initialization sequence. Also verify transceiver magnetics and 100BASE-FX optical-interface requirements. A package-only substitution can compile electrically but fail during link negotiation or startup.
Informasi Konformitas
The product listing explicitly identifies KSZ8893FQLI-FX as RoHS compliant. No separate REACH, halogen-free, conflict-minerals, or automotive-qualification statement was established.