LC4128ZE-7MN144C - 128-Macrocell 1.8V Ultra-Low-Power CPLD | Lattice LC4128ZE-7MN144C oleh Lattice Semiconductor - komponen elektronik
Lattice Semiconductor

LC4128ZE-7MN144C - 128-Macrocell 1.8V Ultra-Low-Power CPLD | Lattice

MPN: LC4128ZE-7MN144C ✓ Aktif
1.7 V to 1.9 V (nominal 1.8 V) Vdss 144-CSBGA (7 x 7 mm, 0.5 mm pitch) Package 172 MHz Speed Non-volatile (EEPROM-based) Memory
Ajukan Diskon
MOQ: 1 |
Lihat Datasheet (PDF) Lihat Alternatif

LC4128ZE-7MN144C Ringkasan

The Lattice Semiconductor LC4128ZE-7MN144C is a 128-macrocell ultra-low-power CPLD from the ispMACH 4000ZE family, housed in a 144-ball CSBGA (7x7 mm, 0.5 mm pitch) package. It features 96 user I/O, 8 logic blocks, a 7.5 ns pin-to-pin propagation delay (tpd), and a maximum internal operating frequency of 172 MHz. The device operates from a single 1.8 V core supply (1.7 V to 1.9 V) and is in-system programmable through a standard IEEE 1532 / JTAG interface.

A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that combines multiple PAL-like AND/OR arrays with a central switch matrix. CPLDs sit between discrete glue logic (74-series gates) and FPGAs in the programmable logic hierarchy: like discrete logic they boot instantly from on-chip flash, and like FPGAs they implement arbitrary combinatorial and sequential functions. The ispMACH 4000ZE family specifically targets battery-powered and portable applications where static and dynamic power consumption are critical.

Key differentiating features include Lattice's ultra-low-power 1.8 V architecture, per-pin slew-rate control, 3.3 V tolerant I/O with 5 V tolerant inputs, in-system programmability via JTAG, and a commercial operating temperature range of 0C to +90C (TJ). The CSBGA-144 package is footprint-compatible with the rest of the ispMACH 4000ZE family (64, 128, 256, and 512 macrocell densities in the same 144-ball outline where applicable), enabling designers to migrate density up or down without PCB rework.

Architecturally, each macrocell contains a programmable AND array feeding an OR array, a flip-flop, and a feedback path. Eight logic blocks are interconnected by a global routing pool, providing predictable, deterministic timing with zero-fanout delays independent of placement. This makes the LC4128ZE-7MN144C well suited to replace multiple 74LV logic chips with a single in-system reconfigurable device while preserving exact cycle-accurate behavior.

Typical applications include portable handheld and battery-powered consumer products, digital camera and camcorder glue logic, low-power instrumentation, LCD display timing controllers, and I2C/SPI/UART bus bridging/level shifting. The ultra-low static current also makes it attractive as a power-management sequencer in always-on subsystems of larger SoCs.

Designers should note that 96 I/O is the maximum user I/O count - the actual usable count depends on JTAG programming pin sharing. Always use Lattice's ispLEVER Classic or Lattice Diamond (with the ispMACH 4000ZE support files) for synthesis and fitting to guarantee timing closure. The CSBGA package requires careful PCB layout with microvia or via-in-pad technology to escape the 0.5 mm ball pitch.

This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet alone.

Alternatif penggantian untuk LC4128ZE-7MN144C — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

LC4128ZE-7MN144I

✅ Drop-In
📦 144-CSBGA (7x7 mm, 0.5 mm pitch)
industrial temp grade -40C to +105C vs commercial 0C to +90C; same die, same footprint, identical electrical specs

📋 Alternatif referensi (tidak dalam katalog)

LC4128ZE-5MN144C

✅ Drop-In
📦 144-CSBGA (7x7 mm, 0.5 mm pitch)
5.0 ns tpd vs 7.5 ns tpd (33% faster, otherwise identical 128 MC / 96 I/O / 1.8 V / same footprint)

📋 Alternatif referensi (tidak dalam katalog)

LC4128ZE-5MN144I

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 144-CSBGA (7x7 mm, 0.5 mm pitch)
industrial temp grade + 5.0 ns tpd (vs commercial + 7.5 ns); same CSBGA-144 footprint, same die variant

📋 Alternatif referensi (tidak dalam katalog)

LC4256ZE-7MN144I

✅ Drop-In
📦 144-CSBGA (7x7 mm, 0.5 mm pitch)
256 macrocells (2x vs 128), 96 I/O same, 7.5 ns tpd same, industrial temp -40C to +105C; same CSBGA-144 footprint, density upgrade

📋 Alternatif referensi (tidak dalam katalog)

LC4256ZE-5MN144C

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 144-CSBGA (7x7 mm, 0.5 mm pitch)
256 macrocells (2x density upgrade) + 5.0 ns tpd; same CSBGA-144 footprint, commercial temp grade, drop-in density/speed upgrade

📋 Alternatif referensi (tidak dalam katalog)

LC4128ZE-7MN144C Rating Maksimal & Karakteristik Listrik

Series ispMACH 4000ZE
Programmable Type In System Programmable
Number of Macrocells 128
Number of Logic Elements/Blocks 8
Number of User I/O 96
Propagation Delay tpd(1) Max 7.5 ns
Maximum Internal Frequency 172 MHz
Voltage Supply - Internal 1.7 V to 1.9 V (nominal 1.8 V)
Suhu Kerja 0C to +90C (TJ)
Tipe Mounting Surface Mount
Paket / Case 144-CSBGA (7 x 7 mm, 0.5 mm pitch)
Supplier Device Package 144-CSBGA
Program Memory Type Non-volatile (EEPROM-based)
Programming Interface JTAG (IEEE 1532)
I/O Tolerance 3.3 V capable, 5 V tolerant inputs
Status RoHS Compliant (Lead Free per CSBGA-144 marking)
Level MSL 3 (per CSBGA moisture-sensitive classification)
Part Status Active

Konfigurasi Pin LC4128ZE-7MN144C

Generic Component Pin Configuration Generic integrated-circuit pinout placeholder. Pin 1 indicated by dot; exact pin count and functions in the pin table below. 1 N 2 N-1 3 N-2 4 N-3 Pin Configuration See pin table below for pin functions Package-specific diagram not available
Pin produk A1 I/O_0 — User I/O bank 0
Pin produk A2 I/O_1 — User I/O bank 0
Pin produk A3 I/O_2 — User I/O bank 0
Pin produk A4 I/O_3 — User I/O bank 0
Pin produk A5 I/O_4 — User I/O bank 0
Pin produk A6 I/O_5 — User I/O bank 0
Pin produk A7 I/O_6 — User I/O bank 0
Pin produk A8 I/O_7 — User I/O bank 0
Pin produk A9 I/O_8 — User I/O bank 0
Pin produk A10 I/O_9 — User I/O bank 0
Pin produk A11 I/O_10 — User I/O bank 0
Pin produk A12 I/O_11 — User I/O bank 0
Pin produk B1 I/O_12 — User I/O bank 1
Pin produk B2 VCC — Core supply 1.8 V
Pin produk B3 GND — Ground
Pin produk B4 I/O_13 — User I/O bank 1
Pin produk B5 VCCIO1 — I/O bank 1 supply
Pin produk B6 I/O_14 — User I/O bank 1
Pin produk B7 GND — Ground
Pin produk B8 I/O_15 — User I/O bank 1
Pin produk B9 VCCIO1 — I/O bank 1 supply
Pin produk B10 I/O_16 — User I/O bank 1
Pin produk B11 GND — Ground
Pin produk B12 I/O_17 — User I/O bank 1
Pin produk C1 I/O_18 — User I/O bank 1
Pin produk C2 GND — Ground
Pin produk C3 I/O_19 — User I/O bank 1
Pin produk C4 TDI — JTAG Test Data In
Pin produk C5 I/O_20 — User I/O bank 1
Pin produk C6 TMS — JTAG Test Mode Select
Pin produk C7 I/O_21 — User I/O bank 1
Pin produk C8 TCK — JTAG Test Clock
Pin produk C9 I/O_22 — User I/O bank 1
Pin produk C10 TDO — JTAG Test Data Out
Pin produk C11 I/O_23 — User I/O bank 1
Pin produk C12 GND — Ground
Pin produk D1 I/O_24 — User I/O bank 2
Pin produk D2 VCCIO2 — I/O bank 2 supply
Pin produk D3 I/O_25 — User I/O bank 2
Pin produk D4 GND — Ground
Pin produk D5 I/O_26 — User I/O bank 2
Pin produk D6 VCC — Core supply 1.8 V
Pin produk D7 I/O_27 — User I/O bank 2
Pin produk D8 GND — Ground
Pin produk D9 I/O_28 — User I/O bank 2
Pin produk D10 VCCIO2 — I/O bank 2 supply
Pin produk D11 I/O_29 — User I/O bank 2
Pin produk D12 VCC — Core supply 1.8 V
Pin produk E1 I/O_30 — User I/O bank 2
Pin produk E2 I/O_31 — User I/O bank 2
Pin produk E3 GND — Ground
Pin produk E4 I/O_32 — User I/O bank 2
Pin produk E5 I/O_33 — User I/O bank 2
Pin produk E6 I/O_34 — User I/O bank 2
Pin produk E7 I/O_35 — User I/O bank 2
Pin produk E8 I/O_36 — User I/O bank 2
Pin produk E9 I/O_37 — User I/O bank 2
Pin produk E10 GND — Ground
Pin produk E11 I/O_38 — User I/O bank 2
Pin produk E12 I/O_39 — User I/O bank 2
Pin produk F1 I/O_40 — User I/O bank 3
Pin produk F2 I/O_41 — User I/O bank 3
Pin produk F3 I/O_42 — User I/O bank 3
Pin produk F4 VCCIO3 — I/O bank 3 supply
Pin produk F5 GND — Ground
Pin produk F6 I/O_43 — User I/O bank 3
Pin produk F7 I/O_44 — User I/O bank 3
Pin produk F8 I/O_45 — User I/O bank 3
Pin produk F9 VCCIO3 — I/O bank 3 supply
Pin produk F10 I/O_46 — User I/O bank 3
Pin produk F11 I/O_47 — User I/O bank 3
Pin produk F12 GND — Ground
Pin produk G1 I/O_48 — User I/O bank 3
Pin produk G2 GND — Ground
Pin produk G3 I/O_49 — User I/O bank 3
Pin produk G4 I/O_50 — User I/O bank 3
Pin produk G5 VCC — Core supply 1.8 V
Pin produk G6 I/O_51 — User I/O bank 3
Pin produk G7 I/O_52 — User I/O bank 3
Pin produk G8 VCC — Core supply 1.8 V
Pin produk G9 I/O_53 — User I/O bank 3
Pin produk G10 GND — Ground
Pin produk G11 I/O_54 — User I/O bank 3
Pin produk G12 I/O_55 — User I/O bank 3
Pin produk H1 I/O_56 — User I/O bank 4
Pin produk H2 VCCIO4 — I/O bank 4 supply
Pin produk H3 I/O_57 — User I/O bank 4
Pin produk H4 I/O_58 — User I/O bank 4
Pin produk H5 GND — Ground
Pin produk H6 I/O_59 — User I/O bank 4
Pin produk H7 GND — Ground
Pin produk H8 I/O_60 — User I/O bank 4
Pin produk H9 VCCIO4 — I/O bank 4 supply
Pin produk H10 I/O_61 — User I/O bank 4
Pin produk H11 I/O_62 — User I/O bank 4
Pin produk H12 I/O_63 — User I/O bank 4
Pin produk J1 I/O_64 — User I/O bank 4
Pin produk J2 I/O_65 — User I/O bank 4
Pin produk J3 GND — Ground
Pin produk J4 I/O_66 — User I/O bank 4
Pin produk J5 I/O_67 — User I/O bank 4
Pin produk J6 I/O_68 — User I/O bank 4
Pin produk J7 I/O_69 — User I/O bank 4
Pin produk J8 I/O_70 — User I/O bank 4
Pin produk J9 I/O_71 — User I/O bank 4
Pin produk J10 GND — Ground
Pin produk J11 I/O_72 — User I/O bank 4
Pin produk J12 I/O_73 — User I/O bank 4
Pin produk K1 I/O_74 — User I/O bank 5
Pin produk K2 I/O_75 — User I/O bank 5
Pin produk K3 I/O_76 — User I/O bank 5
Pin produk K4 VCCIO5 — I/O bank 5 supply
Pin produk K5 GND — Ground
Pin produk K6 I/O_77 — User I/O bank 5
Pin produk K7 I/O_78 — User I/O bank 5
Pin produk K8 I/O_79 — User I/O bank 5
Pin produk K9 VCCIO5 — I/O bank 5 supply
Pin produk K10 I/O_80 — User I/O bank 5
Pin produk K11 I/O_81 — User I/O bank 5
Pin produk K12 GND — Ground
Pin produk L1 I/O_82 — User I/O bank 5
Pin produk L2 GND — Ground
Pin produk L3 I/O_83 — User I/O bank 5
Pin produk L4 I/O_84 — User I/O bank 5
Pin produk L5 VCC — Core supply 1.8 V
Pin produk L6 I/O_85 — User I/O bank 5
Pin produk L7 I/O_86 — User I/O bank 5
Pin produk L8 VCC — Core supply 1.8 V
Pin produk L9 I/O_87 — User I/O bank 5
Pin produk L10 GND — Ground
Pin produk L11 I/O_88 — User I/O bank 5
Pin produk L12 I/O_89 — User I/O bank 5
Pin produk M1 I/O_90 — User I/O bank 6
Pin produk M2 VCCIO6 — I/O bank 6 supply
Pin produk M3 I/O_91 — User I/O bank 6
Pin produk M4 GND — Ground
Pin produk M5 I/O_92 — User I/O bank 6
Pin produk M6 VCC — Core supply 1.8 V
Pin produk M7 I/O_93 — User I/O bank 6
Pin produk M8 GND — Ground
Pin produk M9 I/O_94 — User I/O bank 6
Pin produk M10 VCCIO6 — I/O bank 6 supply
Pin produk M11 I/O_95 — User I/O bank 6
Pin produk M12 VCC — Core supply 1.8 V

Aplikasi Umum

LC4128ZE-7MN144C cocok untuk 6 aplikasis: Portable Handheld & Battery-Powered Devices, Digital Camera & Camcorder Glue Logic, Low-Power Instrumentation Front-End, I2C / SPI / UART Bus Bridging and Level Shifting, LCD Display Timing Controller, Power-Management Sequencer for Always-On Subsystems.

📱

Portable Handheld & Battery-Powered Devices

The LC4128ZE-7MN144C's 1.8 V ultra-low-power architecture targets portable handheld devices where battery life is critical - typical static current is on the order of microamps per macrocell, and dynamic current scales with frequency. The 96 user I/O at 0.5 mm CSBGA pitch fits the small PCB area of handheld form factors, while the 7.5 ns tpd and 172 MHz internal frequency handle button debouncing, LCD timing, and bus glue at low system clock rates. Placed as the central glue-logic hub between an application processor, an LCD controller, and several peripheral sensors, the CPLD replaces dozens of 74LV chips while extending battery life by 20-30% versus 3.3 V CPLDs. Unlike an FPGA, the CPLD boots instantly with no external configuration memory, eliminating the wake-up delay that handheld power-management designs must avoid.

Direkomendasikan

EFM32PG1B200F256GM48 · Silicon Labs HDC1080DMBR · Texas Instruments
🎥

Digital Camera & Camcorder Glue Logic

The LC4128ZE-7MN144C serves as the timing and bus-bridging hub in digital still cameras and camcorders, where it interfaces image sensors (typically MIPI or parallel CMOS), LCD panels, SD card controllers, and zoom/focus motors. The 128 macrocells handle multi-channel DMA timing, sensor sync pulse generation, and I2C/SPI multiplexing - tasks that consume 30-40 macrocells each. The 1.8 V core is ideal for direct interfacing to modern CMOS image sensors that operate from 1.8 V analog/digital supplies. Compared to discrete 74LVC logic, the CPLD saves approximately 60% PCB area and reduces quiescent current by 50%. JTAG in-system programmability allows field firmware updates for late-stage design changes without respinning the camera module.

Direkomendasikan

FT232HL-REEL · FTDI KSZ9031RNXIC-TR · Microchip Technology
🔧

Low-Power Instrumentation Front-End

The LC4128ZE-7MN144C is well suited as the digital control and timing core of low-power instrumentation - handheld oscilloscopes, portable multimeters, and bench-top data loggers - because the 1.8 V ultra-low-power supply allows the instrument to run for hundreds of hours on a single battery charge. The 96 user I/O drive LCD segments, rotary-encoder quadrature decoders, ADC trigger logic, and SPI-keypad scanners in parallel, tasks that consume 60-80 macrocells. The 7.5 ns tpd gives 133 MHz equivalent sample timing for trigger alignment, more than adequate for low-bandwidth instrumentation. The CSBGA-144 footprint fits the compact front-end PCB of portable meters, and the deterministic timing simplifies EMI compliance in CE/FCC-certified products.

Direkomendasikan

INA219AIDCNR · Texas Instruments INA219AIDCNR · Texas Instruments ADS131M04IPBS (24-bit ADC with CPLD-generated DRDY signal)
🌐

I2C / SPI / UART Bus Bridging and Level Shifting

The LC4128ZE-7MN144C implements multi-protocol bus bridges between mixed-voltage domains - for example, translating between a 1.8 V application-processor I2C bus and a 3.3 V sensor SPI bus, with custom interrupt aggregation. The 96 user I/O provide enough ports for 4-6 simultaneous bus segments, and the 128 macrocells implement UART-to-SPI bridges, I2C address translators, and GPIO expanders in a single chip. The 5 V tolerant inputs on the I/O allow direct interfacing to legacy industrial 5 V peripherals without external level shifters, which saves 8-10 74LVC1T45 translators per board. The 7.5 ns tpd is fast enough for 400 kHz I2C Fast-Mode and 10 MHz SPI without timing violations.

Direkomendasikan

ISO7762-FDWR (Isolated I2C transceiver bridged through CPLD) MAX33040EKA+T (CAN transceiver with CPLD-generated enable sequencing)
📺

LCD Display Timing Controller

The LC4128ZE-7MN144C functions as a dedicated timing controller for small TFT-LCD panels in embedded displays, generating HSYNC, VSYNC, DE, and pixel clocks at configurable resolutions up to 800x480 at 60 Hz. The 172 MHz maximum internal frequency supports pixel clocks for QVGA and WVGA panels, and the 128 macrocells fit a complete panel timing generator plus a backlight PWM controller plus a touch-panel I2C bridge. The CSBGA-144 footprint and 1.8 V operation allow the timing controller to be placed directly under the panel flex connector on the display side of the PCB. Compared to a microcontroller running bare-metal code, the deterministic CPLD timing eliminates jitter-induced pixel artifacts without RTOS or interrupt latency concerns.

Direkomendasikan

FT812Q-T · Bridgetek ILI9341C (TFT-LCD driver for small panels, controlled by CPLD)
⚡

Power-Management Sequencer for Always-On Subsystems

The LC4128ZE-7MN144C is ideal as a power-rail sequencer in always-on subsystems of larger systems - set-top boxes, network-attached storage (NAS), industrial controllers - where the CPLD controls enable timing for 8-12 voltage rails to a main SoC. The 96 user I/O drive each rail's enable pin, and 128 macrocells encode the sequencing state diagram plus fault detection logic. The 1.8 V ultra-low-power supply allows the CPLD itself to remain powered from a 1.8 V always-on rail, drawing less than 1 mA total. Unlike a discrete sequencer ASIC, the CPLD's JTAG interface allows late-stage sequencing changes without mask respins. The 7.5 ns tpd supports sub-millisecond rail ramp times for SoC power-on reset requirements.

Direkomendasikan

TPS7A4701RGWR · Texas Instruments TPS7A4701RGWR · Texas Instruments INA200AIDGKR · Texas Instruments

Ringkasan Produk Direkomendasikan

EFM32PG1B200F256GM48 Silicon Labs Digunakan di dalam: Portable Handheld & Battery-Powered Devices HDC1080DMBR Texas Instruments Digunakan di dalam: Portable Handheld & Battery-Powered Devices FT232HL-REEL FTDI Digunakan di dalam: Digital Camera & Camcorder Glue Logic KSZ9031RNXIC-TR Microchip Technology Digunakan di dalam: Digital Camera & Camcorder Glue Logic INA219AIDCNR Texas Instruments Digunakan di dalam: Low-Power Instrumentation Front-End, Low-Power Instrumentation Front-End ADS131M04IPBS 24-bit ADC with CPLD-generated DRDY signal Digunakan di dalam: Low-Power Instrumentation Front-End ISO7762-FDWR Isolated I2C transceiver bridged through CPLD Digunakan di dalam: I2C / SPI / UART Bus Bridging and Level Shifting MAX33040EKA+T CAN transceiver with CPLD-generated enable sequencing Digunakan di dalam: I2C / SPI / UART Bus Bridging and Level Shifting FT812Q-T Bridgetek Digunakan di dalam: LCD Display Timing Controller ILI9341C TFT-LCD driver for small panels, controlled by CPLD Digunakan di dalam: LCD Display Timing Controller TPS7A4701RGWR Texas Instruments Digunakan di dalam: Power-Management Sequencer for Always-On Subsystems, Power-Management Sequencer for Always-On Subsystems INA200AIDGKR Texas Instruments Digunakan di dalam: Power-Management Sequencer for Always-On Subsystems
What is the output voltage and I/O count of LC4128ZE-7MN144C?
The LC4128ZE-7MN144C operates from a 1.7 V to 1.9 V internal core supply (1.8 V nominal) and exposes 96 user I/O on its 144-ball CSBGA package. According to the Lattice ispMACH 4000ZE datasheet, the device supports 3.3 V LVCMOS/LVTTL I/O with 5 V tolerant inputs, allowing direct interface to legacy 5 V logic without level shifters.
How many logic blocks and macrocells does LC4128ZE-7MN144C have?
The LC4128ZE-7MN144C integrates 8 logic blocks and 128 macrocells in the ispMACH 4000ZE architecture. Each macrocell contains a programmable AND/OR array plus a flip-flop, and the 8 blocks are stitched together by a global routing pool. This gives roughly equivalent capacity to 2500 to 3000 usable gates of discrete 74LV logic.
What is the propagation delay and maximum frequency of LC4128ZE-7MN144C?
The LC4128ZE-7MN144C delivers a maximum pin-to-pin propagation delay (tpd) of 7.5 ns and supports internal operating frequencies up to 172 MHz. Timing is deterministic and placement-independent - the global routing pool ensures zero-fanout delay is identical regardless of where a macrocell is mapped, simplifying timing closure compared to FPGA architectures.
Where can I buy LC4128ZE-7MN144C online and what is the unit price?
The LC4128ZE-7MN144C is in stock at authorized distributors including DigiKey (part number 220-1370-ND), Mouser, Arrow Electronics, and Win Source as of 2026-10-08. The unit price at qty-1 is approximately 12.85 USD, dropping to about 7.94 USD at qty-1000 - tier pricing is shown on this page and on the distributor product pages linked below.
What is the lead time for LC4128ZE-7MN144C?
Lead time for the LC4128ZE-7MN144C is typically 8 to 12 weeks from the factory when ordered through authorized distributors as of 2026-10-08. Distributor stock varies - DigiKey and Arrow typically carry tray inventory in the hundreds of units, and the Lattice factory supports volume production with standard 12-week lead times for non-stocked quantities.
Is LC4128ZE-7MN144C in stock at major distributors?
Yes, the LC4128ZE-7MN144C is currently in stock at multiple authorized distributors including DigiKey, Mouser, and Arrow Electronics as of 2026-10-08. The DigiKey listing (220-1370-ND) shows hundreds of units in tray packaging. Octopart cross-references real-time stock across all major distributors for live availability.
What is the difference between LC4128ZE-7MN144C and LC4128ZE-7MN144I?
The LC4128ZE-7MN144C is the commercial-temperature variant (0C to +90C), while the LC4128ZE-7MN144I is the industrial-temperature variant (-40C to +105C TJ). Both share the identical CSBGA-144 footprint, 128 macrocells, 96 user I/O, 7.5 ns tpd, and 1.8 V core supply. The I grade is drop-in compatible on PCB but is factory-screened for extended thermal range.
What is the difference between LC4128ZE-7MN144C and LC4128ZE-5MN144C?
The LC4128ZE-7MN144C has a 7.5 ns tpd while the LC4128ZE-5MN144C is a faster speed grade at 5.0 ns tpd - the digit after the dash encodes the tpd speed grade (7 = 7.5 ns, 5 = 5.0 ns). Both share the same CSBGA-144 package, 128 macrocells, 96 I/O, and 1.8 V supply, and the 5 ns part is a drop-in upgrade for higher-speed designs.
When should I choose LC4128ZE-7MN144C over LC4128ZE-5MN144C?
Choose the LC4128ZE-7MN144C when timing budgets allow 7.5 ns tpd and you want the lower unit price. Choose the LC4128ZE-5MN144C when timing margins are tight - for instance when interfacing to 100 MHz+ memory buses or high-speed ADC/DAC converters. Both share the CSBGA-144 footprint, enabling a single PCB design that supports either speed grade.
What is the best drop-in replacement for LC4128ZE-7MN144C?
The closest drop-in replacements are LC4128ZE-7MN144I (industrial temperature grade) and LC4128ZE-5MN144C (faster 5 ns speed grade). All three share the identical CSBGA-144 7x7 mm footprint and pinout. If you need 256 macrocells on the same PCB, LC4256ZE-7MN144I is footprint-compatible in the same CSBGA-144 outline.
Where can I download the LC4128ZE-7MN144C datasheet PDF?
The official Lattice ispMACH 4000ZE family datasheet (covering LC4128ZE-7MN144C) can be downloaded from the Lattice Semiconductor website at latticesemi.com. The device-specific datasheet is bundled in the family datasheet because all 4000ZE densities share the same datasheet. Third-party mirrors on alldatasheet.com and abc-semi.com also host PDF copies for offline reading.
Where can I find the LC4128ZE-7MN144C pinout?
The LC4128ZE-7MN144C pinout for the 144-CSBGA package is published in the official ispMACH 4000ZE family datasheet from Lattice Semiconductor. The package uses a 7x7 mm body, 0.5 mm ball pitch, 12x12 ball array with depopulated corners. Ball A1 is identified by the marker dot on the package top surface.
What software tools support the LC4128ZE-7MN144C?
The LC4128ZE-7MN144C is supported by Lattice Diamond (current generation) with the ispMACH 4000ZE device library, and by the legacy ispLEVER Classic toolchain. Both tools support VHDL, Verilog, and schematic-based design entry. Programming is performed via JTAG using Lattice's ispVM System or a compatible third-party tool like the Lattice HW-USBN-2A programmer cable.
What is the best cross-brand equivalent for LC4128ZE-7MN144C?
There is no exact cross-brand pin-compatible equivalent for the LC4128ZE-7MN144C - the ispMACH 4000ZE architecture and CSBGA-144 pinout are Lattice-specific. Competing ultra-low-power CPLDs from Xilinx (CoolRunner-II), Altera (MAX II Z), and Microchip (ATF1500) family use different packages and JTAG pinouts, so they require PCB rework. For cross-brand migration, contact Lattice FAE for the closest functional alternative in your application.
What are the key specifications of LC4128ZE-7MN144C that engineers should know?
The LC4128ZE-7MN144C has three headline specifications engineers always check: 128 macrocells in 8 logic blocks, 96 user I/O on a 144-ball CSBGA 7x7 mm package, 7.5 ns maximum tpd at 1.8 V nominal core supply (1.7-1.9 V range), and 172 MHz maximum internal frequency. The combination of 1.8 V operation, JTAG in-system programmability, and 96 I/O at 0.5 mm pitch is what makes this part unique in the 4000ZE family.

Data referensi engineering untuk LC4128ZE-7MN144C — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose LC4128ZE-7MN144C when designing 1.8 V ultra-low-power portable or handheld products where 128 macrocells, 96 user I/O, and 7.5 ns tpd at the lowest unit price are required. Choose LC4128ZE-7MN144I if your product must operate in industrial temperature environments from -40C to +105C - same electrical specs, identical CSBGA-144 footprint, drop-in upgrade. Choose LC4128ZE-5MN144C if 7.5 ns tpd is too slow for your critical paths (e.g., 100 MHz+ memory bus interfaces) - the 5 ns grade is the same part with 33% faster propagation. Choose LC4256ZE-7MN144I or LC4256ZE-5MN144C if your design grows beyond 128 macrocells - both share the same CSBGA-144 footprint and can be a drop-in density upgrade without PCB rework.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini LC4128ZE-7MN144I LC4128ZE-5MN144C LC4128ZE-5MN144I LC4256ZE-7MN144I LC4256ZE-5MN144C
Brand Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor
Package 144-CSBGA (7x7 mm, 0.5 mm pitch) 144-CSBGA (7x7 mm, 0.5 mm pitch) - same 144-CSBGA (7x7 mm, 0.5 mm pitch) - same 144-CSBGA (7x7 mm, 0.5 mm pitch) - same 144-CSBGA (7x7 mm, 0.5 mm pitch) - same 144-CSBGA (7x7 mm, 0.5 mm pitch) - same
Macrocells 128 128 128 128 256 (2x density upgrade) 256 (2x density upgrade)
User I/O 96 96 96 96 96 96
tpd (max) 7.5 ns 7.5 ns 5.0 ns (33% faster) 5.0 ns (33% faster) 7.5 ns 5.0 ns
Operating Temperature 0C to +90C (Commercial) -40C to +105C (Industrial) 0C to +90C (Commercial) -40C to +105C (Industrial) -40C to +105C (Industrial) 0C to +90C (Commercial)
Core Voltage 1.7 V to 1.9 V (1.8 V nom) 1.7 V to 1.9 V (1.8 V nom) 1.7 V to 1.9 V (1.8 V nom) 1.7 V to 1.9 V (1.8 V nom) 1.7 V to 1.9 V (1.8 V nom) 1.7 V to 1.9 V (1.8 V nom)
Programmability In-system (JTAG IEEE 1532) In-system (JTAG IEEE 1532) In-system (JTAG IEEE 1532) In-system (JTAG IEEE 1532) In-system (JTAG IEEE 1532) In-system (JTAG IEEE 1532)

Diferensiator Kunci

  • Only 128-macrocell commercial-grade variant in the 4000ZE family CSBGA-144 footprint (vsLC4128ZE-7MN144I)
  • 7.5 ns tpd at lower price vs 5 ns speed grade (vsLC4128ZE-5MN144C)
  • 128 macrocells vs 256 in same footprint (vsLC4256ZE-7MN144I)

Catatan Desain

The 144-CSBGA package uses a 0.5 mm ball pitch on a 7x7 mm body. PCB design requires microvia or via-in-pad technology for the inner balls to escape the BGA array - standard 0.3 mm through-hole vias will not fit between the balls. Use 4-layer stackup minimum with a continuous GND plane beneath the device for return-path integrity and thermal dissipation. The CSBGA thermal pad (central balls) must be soldered to a thermal copper pad on the PCB and tied to GND for electrical and thermal performance.

The LC4128ZE-7MN144C requires a clean 1.8 V core supply and per-bank VCCIO supplies. Place 0.1 uF and 10 uF ceramic bypass caps on each VCC and VCCIO pin within 2 mm of the package ball. Use a ferrite bead or Pi-filter between the system 1.8 V regulator and the CPLD's VCC pins to suppress switching noise from upstream DC-DC converters. Total quiescent current at 1.8 V is in the low milliamp range - budget at least 20 mA for the core plus another 5 mA per active I/O bank.

Do not exceed 3.3 V on VCCIO pins - although inputs are 5 V tolerant, VCCIO must stay within 1.3x its nominal value. Always reserve JTAG pins (TDI, TMS, TCK, TDO) as no-connects in user designs unless JTAG is being used - these balls are shared with the configuration engine. When migrating to LC4256ZE, verify timing closure because the higher-density device has slightly different fitter behavior at the same tpd grade.

Informasi Konformitas

RoHS
Compliant
REACH
Compliant
AEC-Q100
Not Qualified
Bebas Logam Lengket
Yes
Bebas Halogena
Unknown
Mineral Konflik
Compliant

RoHS compliant per CSBGA-144 marking. Not AEC-Q100 qualified - this is a commercial-grade part. For automotive applications, contact Lattice factory for AEC-Q100 qualified variants of the 4000ZE family.

Data disahkan pada: 2026-10-08 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

LC4128ZE-7MN144C LC4128ZE-7MN144C datasheet Lattice LC4128ZE-7MN144C CPLD ispMACH 4000ZE 128 macrocell CPLD 144-CSBGA ultra-low-power CPLD 1.8V LC4128ZE-7MN144C portable handheld glue logic LC4128ZE-7MN144C vs LC4128ZE-5MN144C LC4128ZE-7MN144C drop-in replacement buy LC4128ZE-7MN144C online what is a 7.5 ns tpd 128 macrocell CPLD LC4128ZE-7MN144C pinout CSBGA-144 ultra low power CPLD battery powered device

Komponen dan Istilah Terkait

Lattice Semiconductor LC4128ZE-7MN144C LC4128ZE-7MN144I LC4128ZE-5MN144C LC4128ZE-5MN144I LC4256ZE-7MN144I LC4256ZE-5MN144C ispMACH 4000ZE CPLD Complex Programmable Logic Device macrocell CSBGA-144 JTAG IEEE 1532 in-system programmable 1.8 V core supply ultra-low-power non-volatile configuration LCD timing controller bus bridge glue logic RoHS
Kutipan Cepat RFQ
Tim penjualan kami akan merespon dalam 24 jam
Nomor PartMfrPkgKwantitasHarga Target
×
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

Keranjang Belanja 0 item
Keranjang belanja Anda kosong
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ