Texas Instruments

LM2902KAVQPWREP - Quad 26V 1.2MHz Op Amp | Texas Instruments

MPN: LM2902KAVQPWREP ✓ Aktif
26 V Vdss 14-pin TSSOP (PW) Package
MOQ: 1 |

LM2902KAVQPWREP Ringkasan

Texas Instruments LM2902KAVQPWREP is a four-circuit operational amplifier rated for 26 V operation, with a 1.2 MHz gain-bandwidth product, 2 mV input-offset voltage, and improved 2 kV ESD protection. The device is packaged in a 14-pin TSSOP (PW) and supports an operating temperature range of -40°C to 125°C.

An operational amplifier is an analog signal-conditioning semiconductor that compares two input voltages and drives its output to reflect their difference. The quad LM2902 family contains four independent, internally frequency-compensated amplifiers, allowing one package to serve multiple analog channels. Within the broader hierarchy, this is an operational amplifier within analog amplifier ICs and semiconductor signal-conditioning devices.

The headline characteristics support precision and general-purpose signal conditioning at a 1.2 MHz gain-bandwidth product. A 2 mV input-offset voltage is useful in sensor interfaces, buffer stages, and feedback networks requiring low offset. Improved 2 kV ESD protection adds robustness on exposed circuit boards, while the four-amplifier configuration reduces package count in designs requiring several independent analog channels.

Each amplifier is designed to operate from a single supply or from split supplies. The V-suffix family supports operation where the difference between split supplies is 3 V to 32 V, subject to the stated supply limits. Internal frequency compensation allows each amplifier to operate as a voltage follower without an external compensation network. The common-emitter, differential-input architecture supports feedback-based gain and filtering implementations across industrial, instrumentation, and control applications.

Typical uses include low-frequency sensor conditioning, transducer amplification, active filtering, voltage buffering, current-loop interfaces, and general control-signal processing. The four independent circuits can also be assigned to unrelated channels on the same board, provided each amplifier observes the applicable common-mode and output-swing limits. Industrial equipment, data-acquisition modules, and embedded measurement systems benefit from combining four channels in one compact package.

Design the circuit around the -40°C to 125°C temperature range and the 26 V maximum supply rating. Keep input and feedback paths short, provide stable reference and feedback nodes, and verify output swing at the intended load. Do not assume rail-to-rail operation; confirm the input common-mode range and output-current capability against the circuit requirements before production release.

This product page brings together the manufacturer’s device characteristics, package details, verified commercial sourcing links, application guidance, and practical engineering considerations. It also distinguishes the enhanced-product LM2902KAVQPWREP from lower-temperature or different-package family members, helping designers select a replacement without overlooking temperature rating, footprint, or supply constraints.

Alternatif penggantian untuk LM2902KAVQPWREP — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian LM2902KAVQPWREP (sama faktor bentuk dan footprint) — berbeda di dalam Input Offset Voltage, Operating Temperature Range, Package, Maximum Supply Voltage, Amplifier Type.

Texas Instruments
Input Offset Voltage: 2 mV maximum for BA version; 600 uV typical for family
Package: 14-pin TSSOP
Amplifier Type: General-purpose operational amplifier
Bandingkan dengan LM2902KAVQPWREP →
Texas Instruments
Input Offset Voltage: 2 mV maximum
Operating Temperature Range: -40°C to +125°C
Maximum Supply Voltage: 30 V
Bandingkan dengan LM2902KAVQPWREP →
Texas Instruments
Input Offset Voltage: 3 mV
Operating Temperature Range: 0°C to 70°C
Maximum Supply Voltage: 30 V
Bandingkan dengan LM2902KAVQPWREP →
Texas Instruments
Package: 14-pin TSSOP
Maximum Supply Voltage: 30 V
Bandingkan dengan LM2902KAVQPWREP →

LM2902KAVQPWRG4

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
Texas Instruments
📦 TSSOP-14 (PW)
4 circuits · Quad operational amplifier · 30 V · 3 V to 36 V · 1.2 MHz · 2 mV maximum · 2 kV · -40°C to +125°C

Kontak untuk harga

Lihat Datasheet →

LM2902KAVQPWR

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
Texas Instruments
📦 TSSOP-14 (PW)
4 circuits · General-purpose operational amplifier · 1.2 MHz · 2 mV maximum for BA version; 600 uV typical for family · 2 kV for K-suffix devices · Up to 26 V · Plus-and-minus 13 V · 3 V to 36 V

Kontak untuk harga

Lihat Datasheet →

LM324KPWR

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
Texas Instruments
📦 TSSOP-14 (PW)
4 circuits · Quad general-purpose operational amplifier · 30 V · 1.2 MHz · 2 kV · 14-pin TSSOP · 4.40 mm · Surface mount

Kontak untuk harga

Lihat Datasheet →

LM324APWR

✅ Drop-In
Texas Instruments
📦 TSSOP-14 (PW)
4 circuits · General-purpose operational amplifier · 30 V · 1.2 MHz · 3 mV · 0°C to 70°C · 14-pin TSSOP (PW) · 14 pins

Kontak untuk harga

Lihat Datasheet →

LM2902KAVQPWREP Rating Maksimal & Karakteristik Listrik

Amplifier Type Quad general-purpose operational amplifier
Number of Amplifier Circuits 4 circuits
Maximum Supply Voltage 26 V
Gain-Bandwidth Product 1.2 MHz
Input Offset Voltage 2 mV
ESD Protection 2 kV
Rentang Suhu Kerja -40°C to 125°C
Paket 14-pin TSSOP (PW)
Package Width 4.40 mm
Tipe Mounting Surface mount
Product Type Enhanced-product operational amplifier
Compensation Internally frequency compensated

Konfigurasi Pin LM2902KAVQPWREP

TSSOP-14 (4.4mm) Package Pinout Diagram TSSOP-14 4.4x5mm, P0.65mm, JEDEC MO-153. 14-pin thin shrink. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 TSSOP-14 (4.4mm)
Pin produk 1 OUT1 — Output of amplifier 1
Pin produk 2 -IN1 — Inverting input of amplifier 1
Pin produk 3 +IN1 — Noninverting input of amplifier 1
Pin produk 4 V+ — Positive supply connection
Pin produk 5 +IN2 — Noninverting input of amplifier 2
Pin produk 6 -IN2 — Inverting input of amplifier 2
Pin produk 7 OUT2 — Output of amplifier 2
Pin produk 8 OUT3 — Output of amplifier 3
Pin produk 9 -IN3 — Inverting input of amplifier 3
Pin produk 10 +IN3 — Noninverting input of amplifier 3
Pin produk 11 V- — Negative supply connection
Pin produk 12 +IN4 — Noninverting input of amplifier 4
Pin produk 13 -IN4 — Inverting input of amplifier 4
Pin produk 14 OUT4 — Output of amplifier 4

Aplikasi Umum

LM2902KAVQPWREP cocok untuk 6 aplikasis: Industrial Sensor Signal Conditioning, Data Acquisition and Instrumentation, Active Filters and Signal Conditioning, Process Control Loops, Voltage Buffering and Level Conditioning, Audio and Communication Interface Circuits.

🏭

Industrial Sensor Signal Conditioning

The LM2902KAVQPWREP is well suited to industrial sensor conditioning because its four independent amplifiers provide flexible channel allocation and its -40°C to 125°C rating supports extended-temperature equipment. A 2 mV input-offset specification is valuable when amplifying low-level sensor outputs, while the 1.2 MHz gain-bandwidth product is appropriate for many low-frequency pressure, temperature, and position signals. Each channel can provide buffering, gain, or active filtering. Confirm the sensor’s output impedance, common-mode voltage, and noise before fixing the gain, and verify that the output remains within the amplifier’s linear swing range.

📊

Data Acquisition and Instrumentation

The LM2902KAVQPWREP supports compact data-acquisition front ends by combining four general-purpose operational amplifiers in one 14-pin TSSOP. One channel can amplify a sensor, another can buffer the reference, and the remaining channels can implement gain or filtering stages. Its 1.2 MHz gain-bandwidth product is suitable for moderate-bandwidth measurements, while the 2 mV input-offset voltage helps preserve low-level accuracy. The -40°C to 125°C operating range suits industrial instrumentation, but the final error budget should include input bias current, output swing, noise, and the selected external resistor tolerances.

🔧

Active Filters and Signal Conditioning

The LM2902KAVQPWREP can implement the active-filter and conditioning stages commonly found in control and measurement systems. Its four frequency-compensated amplifiers allow multiple filter sections or independent gain blocks to be consolidated in one package, and the 1.2 MHz gain-bandwidth product provides useful bandwidth for low-to-moderate-frequency filters. The 2 mV offset specification helps reduce DC error in low-frequency stages. Stability and response depend on the selected topology, resistor ratios, load, and noise gain, so simulate the complete network rather than evaluating each amplifier channel independently.

⚡

Process Control Loops

The LM2902KAVQPWREP is suitable for low-frequency process-control loops that need input buffering, error amplification, and output conditioning. Its four independent amplifier channels can handle separate stages without requiring four packages, and its 1.2 MHz bandwidth provides more capability than required by many slow control loops. The -40°C to 125°C operating range supports industrial environments. Validate the loop against the actuator and sensor limits, paying particular attention to output swing, capacitive loading, and any requirement for rail-to-rail operation at the selected supply voltage.

🔋

Voltage Buffering and Level Conditioning

The LM2902KAVQPWREP can buffer high-impedance sources before they drive downstream analog circuitry. Each internally compensated amplifier can operate as a voltage follower, reducing source-loading effects while the 1.2 MHz gain-bandwidth product provides ample bandwidth for many sensor and measurement signals. The 2 mV input-offset voltage helps maintain accurate DC levels, and the 14-pin TSSOP package supports compact board layouts. Check the common-mode input range, output swing, capacitive-load stability, and output-current demand for each buffered node before implementation.

🎧

Audio and Communication Interface Circuits

The LM2902KAVQPWREP can support low-frequency audio and communication interface functions such as input buffers, gain stages, and impedance matching. Four amplifiers in one 14-pin TSSOP reduce board space, while the 1.2 MHz gain-bandwidth product is suitable for many voice-band and low-frequency control paths. The device is not a rail-to-rail precision audio amplifier, so output swing and input range must be checked against the signal amplitude and supply rails. Input and feedback component tolerances should be included in the distortion and gain error analysis for precision paths.

What are the key specifications of LM2902KAVQPWREP that engineers should know?
The LM2902KAVQPWREP is a four-circuit operational amplifier with a 26 V maximum supply voltage, 1.2 MHz gain-bandwidth product, 2 mV input-offset voltage, and 2 kV ESD protection. According to the Texas Instruments LM2902KAV product information, it uses four independent, frequency-compensated amplifiers. The specified operating temperature range is -40°C to 125°C, and the package is a 14-pin TSSOP (PW).
What is the operating voltage of LM2902KAVQPWREP?
The LM2902KAVQPWREP is rated for operation up to 26 V. The Texas Instruments LM2902KAV family information also describes split-supply operation with a supply difference from 3 V to 32 V for V-suffixed devices, subject to the individual rail and total supply limits. The 14-pin TSSOP version is specified from -40°C to 125°C, making it suitable for industrial equipment that requires an extended-temperature operational amplifier.
Where can I download the LM2902KAVQPWREP datasheet PDF?
The official LM2902KAVQPWREP product page is the primary starting point for its datasheet and ordering information. It identifies the device as an enhanced-product, quad, 26 V, 1.2 MHz operational amplifier in a 14-pin TSSOP (PW) package. Use the manufacturer datasheet for the complete electrical characteristics, pin assignments, recommended operating conditions, and application guidance for the LM2902KAV family.
Where can I find the LM2902KAVQPWREP pinout?
The LM2902KAVQPWREP pinout is shown in the manufacturer datasheet’s pin-configuration table for the 14-pin TSSOP (PW) package. The four amplifiers use two input pins, one output pin, and power connections each, with V+ and V− serving all four channels. Use the package drawing and pin-description table when assigning PCB nets and checking exposed-pad or no-connect requirements.
Where can I buy LM2902KAVQPWREP online?
Use the Request a Quote form on this page to request LM2902KAVQPWREP availability, current lead time, and ordering information. The device is identified by Texas Instruments as an enhanced-product, four-amplifier 14-pin TSSOP part rated to 125°C. Include the exact MPN, target quantity, and required packaging details when submitting the request so the quote can be matched to the correct device configuration.
What is the price of LM2902KAVQPWREP?
The current LM2902KAVQPWREP price is best obtained through the Request a Quote form on this page. The quote request should include the exact MPN, desired quantity, and reel or other shipping format. This avoids using an outdated quantity break and ensures that availability, extended-temperature grade, and 14-pin TSSOP packaging are all evaluated for the same exact part.
What is the lead time for LM2902KAVQPWREP?
The current lead time for LM2902KAVQPWREP should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, packaging format, and production scheduling. State the required quantity and whether the part is being reeled for automated assembly so that the commercial response reflects the exact LM2902KAVQPWREP configuration and delivery plan.
Is LM2902KAVQPWREP in stock?
Use the Request a Quote form on this page for a current LM2902KAVQPWREP stock and delivery response. Include the exact MPN and quantity because inventory can move between order events and packaging configurations can differ. The manufacturer identifies this MPN as a 14-pin TSSOP, enhanced-product quad operational amplifier rated from -40°C to 125°C.
What can replace LM2902KAVQPWREP?
The strongest same-platform replacement is another pin-compatible 14-pin TSSOP LM2902 or LM324-family device whose electrical ratings meet the original circuit requirements. A same-package candidate must still be checked for input-offset voltage, common-mode range, supply rating, output swing, and temperature grade. The LM324APWR is a documented 14-TSSOP comparison candidate, but production substitution requires validation against the specific operating conditions.
Is LM2902KAVQPWREP the same as LM324APWR?
The LM2902KAVQPWREP and LM324APWR are closely related 1.2 MHz, 14-pin TSSOP quad operational amplifiers, but they are not identical in every operating specification. The LM2902KAVQPWREP is identified as an enhanced-product device with 2 mV offset, 2 kV ESD protection, and operation to 125°C. Compare the manufacturer datasheets before substitution, especially offset, common-mode input, output swing, and temperature limits.
What is the best TI equivalent for LM2902KAVQPWREP?
The best TI equivalent depends on the required grade and footprint. A 14-pin TSSOP LM2902-family member can provide the closest architectural match, while LM324APWR is a documented same-package, 1.2 MHz comparison part. The target’s enhanced-product status, 2 mV offset specification, 2 kV ESD protection, and -40°C to 125°C range must be preserved where they affect the design.
LM2902KAVQPWREP vs LM324APWR - which is better for sensor conditioning?
The LM2902KAVQPWREP is the stronger choice when the design values its enhanced-product rating, 2 mV input-offset voltage, 2 kV ESD protection, or 125°C upper operating temperature. Both parts are documented as 1.2 MHz, 14-pin TSSOP quad amplifiers, so their physical organization is similar. Choose LM324APWR only after confirming its common-mode range, output swing, offset, and temperature limits meet the sensor interface.
When should I choose LM2902KAVQPWREP over LM324APWR?
Choose LM2902KAVQPWREP when an industrial-grade, extended-temperature TSSOP quad amplifier with a stated 2 mV input-offset voltage and improved 2 kV ESD protection is important. Both LM2902KAVQPWREP and LM324APWR are identified with 1.2 MHz operation and a 14-pin TSSOP format. Select the replacement only when its input range, output swing, load capability, noise, and lifecycle conditions are acceptable for the target circuit.
Is LM2902KAVQPWREP suitable for industrial control and measurement systems?
The LM2902KAVQPWREP is suitable for industrial control and measurement systems that require four general-purpose amplifier channels, operation from -40°C to 125°C, and a 26 V maximum supply rating. Its 1.2 MHz gain-bandwidth product is suitable for low-frequency buffering, conditioning, and active filtering. Confirm the output-swing and common-mode limits at the actual signal and supply levels.
How should LM2902KAVQPWREP be used in a differential sensor front end?
Use one LM2902KAVQPWREP channel as the differential input amplifier, connecting the sensor signal to the noninverting input and the reference node to the inverting input, with feedback defining the gain. Its 2 mV input-offset specification supports low-level measurement design, while the four amplifiers allow differential, reference, filtering, and output-buffering stages in one package. Check input bias current and common-mode limits for the sensor source.

Data referensi engineering untuk LM2902KAVQPWREP — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose LM2902KAVQPWREP when the design needs four general-purpose amplifiers in a 14-pin TSSOP, a 26 V maximum supply rating, a stated 2 mV input-offset voltage, improved 2 kV ESD protection, and operation from -40°C to 125°C. Choose LM2902KAVQPWRG4 or LM2902KAVQPW when their grade and temperature limits better match a production program and the remaining electrical characteristics are equivalent. Consider LM324KPWR or LM324APWR when the same 1.2 MHz TSSOP organization is useful, but verify offset, common-mode range, output swing, bias current, temperature rating, and ESD performance before replacing the target. No cross-brand candidate was established with sufficient package and electrical detail, so production substitution should remain with the qualified same-manufacturer family unless a candidate is independently validated against every operating limit.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini LM2902KAVQPWRG4 LM2902KAVQPW LM324KPWR LM324APWR
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 14-pin TSSOP (PW) 14-pin TSSOP (PW) 14-pin TSSOP (PW) 14-pin TSSOP (PW) 14-pin TSSOP
Gain-Bandwidth Product 1.2 MHz 1.2 MHz 1.2 MHz 1.2 MHz 1.2 MHz

Diferensiator Kunci

  • Extended-temperature enhanced-product grade (vsLM324APWR)
  • Lower stated input-offset voltage (vsLM324APWR)
  • Improved ESD protection rating (vsLM324KPWR)
  • Matching bandwidth with broader package family options (vsLM2902KAVQPWRG4)

Catatan Desain

Confirm the total supply voltage and the input common-mode range before laying out the circuit. The LM2902KAVQPWREP is specified for a 26 V maximum supply rating and is not stated to be rail-to-rail. Operating close to a supply rail can therefore clip the output or violate an input limit. Use the manufacturer recommended operating conditions and leave transient margin when the supply is noisy or shares a board with switching circuitry.

Place each amplifier’s feedback components close to the associated input and output pins, and route high-impedance input nets away from switching nodes and digital clock lines. The four channels share V+ and V− connections, so supply-return paths should be low impedance. Keep the TSSOP footprint and pin assignments consistent with the manufacturer land pattern, and inspect the assembled board for solder bridges around the closely spaced leads.

Do not treat any 14-pin TSSOP quad amplifier as an automatic drop-in replacement. Verify pin assignments, common-mode input range, output swing, offset voltage, bias current, supply rating, and temperature grade. For LM324-family candidates, the documented 1.2 MHz class and 14-pin TSSOP format are useful starting points, but operation across the full -40°C to 125°C range and the target’s 2 kV ESD specification still require separate verification.

For high-gain or precision stages, calculate the noise gain at each frequency and verify that the 1.2 MHz gain-bandwidth product provides the required closed-loop bandwidth. Include resistor tolerances, input-offset voltage, input bias current, and output-swing margin in the error budget. If driving a capacitive load, keep the load within the stable operating region shown in the manufacturer datasheet and add isolation resistance when required.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The manufacturer identifies the target as an enhanced-product operational amplifier, but no explicit compliance statements were established for this exact MPN. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status from the current manufacturer product documentation before qualification.

Data disahkan pada: 2026-11-09 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

LM2902KAVQPWREP datasheet LM2902KAVQPWREP datasheet pdf LM2902KAVQPWREP pinout LM2902KAVQPWREP equivalent LM2902KAVQPWREP replacement LM2902KAVQPWREP cross reference LM2902KAVQPWREP footprint LM2902KAVQPWREP price LM2902KAVQPWREP stock Texas Instruments LM2902KAVQPWREP LM2902KAVQPWREP vs LM324APWR LM2902KAV 26V 1.2MHz op amp LM2902KAVQPWREP TSSOP pinout LM2902KAVQPWREP sensor conditioning

Komponen dan Istilah Terkait

Texas Instruments LM2902KAVQPWREP LM2902KAV LM2902KAVQPWRG4 LM2902KAVQPW LM324KPWR LM324APWR Operational Amplifier Quad Operational Amplifier Analog Amplifier IC Signal-Conditioning Semiconductor Frequency-Compensated Amplifier TSSOP-14 TSSOP Package Family Surface-Mount Package Gain-Bandwidth Product Input Offset Voltage ESD Protection Common-Mode Input Range Voltage Follower Active Filter Sensor Signal Conditioning Industrial Control Data Acquisition RoHS REACH AEC-Q100
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ