LM2902KAVQPWREP - Quad 26V 1.2MHz Op Amp | Texas Instruments
部品番号: LM2902KAVQPWREP ✓ 生産中LM2902KAVQPWREP 概要
An operational amplifier is an analog signal-conditioning semiconductor that compares two input voltages and drives its output to reflect their difference. The quad LM2902 family contains four independent, internally frequency-compensated amplifiers, allowing one package to serve multiple analog channels. Within the broader hierarchy, this is an operational amplifier within analog amplifier ICs and semiconductor signal-conditioning devices.
The headline characteristics support precision and general-purpose signal conditioning at a 1.2 MHz gain-bandwidth product. A 2 mV input-offset voltage is useful in sensor interfaces, buffer stages, and feedback networks requiring low offset. Improved 2 kV ESD protection adds robustness on exposed circuit boards, while the four-amplifier configuration reduces package count in designs requiring several independent analog channels.
Each amplifier is designed to operate from a single supply or from split supplies. The V-suffix family supports operation where the difference between split supplies is 3 V to 32 V, subject to the stated supply limits. Internal frequency compensation allows each amplifier to operate as a voltage follower without an external compensation network. The common-emitter, differential-input architecture supports feedback-based gain and filtering implementations across industrial, instrumentation, and control applications.
Typical uses include low-frequency sensor conditioning, transducer amplification, active filtering, voltage buffering, current-loop interfaces, and general control-signal processing. The four independent circuits can also be assigned to unrelated channels on the same board, provided each amplifier observes the applicable common-mode and output-swing limits. Industrial equipment, data-acquisition modules, and embedded measurement systems benefit from combining four channels in one compact package.
Design the circuit around the -40°C to 125°C temperature range and the 26 V maximum supply rating. Keep input and feedback paths short, provide stable reference and feedback nodes, and verify output swing at the intended load. Do not assume rail-to-rail operation; confirm the input common-mode range and output-current capability against the circuit requirements before production release.
This product page brings together the manufacturer’s device characteristics, package details, verified commercial sourcing links, application guidance, and practical engineering considerations. It also distinguishes the enhanced-product LM2902KAVQPWREP from lower-temperature or different-package family members, helping designers select a replacement without overlooking temperature rating, footprint, or supply constraints.
ドロップイン代替品: LM2902KAVQPWREP — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: LM2902KAVQPWREP (同一形状・フットプリント) — 相違点: Input Offset Voltage, Operating Temperature Range, Package, Maximum Supply Voltage, Amplifier Type.
LM2902KAVQPWRG4
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →LM2902KAVQPWR
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →LM324KPWR
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →LM324APWR
✅ ドロップイン価格はお問い合わせください
データシートを見る →LM2902KAVQPWREP 最大定格&電気的特性
| Amplifier Type | Quad general-purpose operational amplifier |
| Number of Amplifier Circuits | 4 circuits |
| Maximum Supply Voltage | 26 V |
| Gain-Bandwidth Product | 1.2 MHz |
| Input Offset Voltage | 2 mV |
| ESD Protection | 2 kV |
| 動作温度範囲 | -40°C to 125°C |
| パッケージ | 14-pin TSSOP (PW) |
| Package Width | 4.40 mm |
| 実装タイプ | Surface mount |
| Product Type | Enhanced-product operational amplifier |
| Compensation | Internally frequency compensated |
LM2902KAVQPWREP ピン構成
| ピン 1 | OUT1 — Output of amplifier 1 |
| ピン 2 | -IN1 — Inverting input of amplifier 1 |
| ピン 3 | +IN1 — Noninverting input of amplifier 1 |
| ピン 4 | V+ — Positive supply connection |
| ピン 5 | +IN2 — Noninverting input of amplifier 2 |
| ピン 6 | -IN2 — Inverting input of amplifier 2 |
| ピン 7 | OUT2 — Output of amplifier 2 |
| ピン 8 | OUT3 — Output of amplifier 3 |
| ピン 9 | -IN3 — Inverting input of amplifier 3 |
| ピン 10 | +IN3 — Noninverting input of amplifier 3 |
| ピン 11 | V- — Negative supply connection |
| ピン 12 | +IN4 — Noninverting input of amplifier 4 |
| ピン 13 | -IN4 — Inverting input of amplifier 4 |
| ピン 14 | OUT4 — Output of amplifier 4 |
主な用途
LM2902KAVQPWREP の用途: 6 件s: Industrial Sensor Signal Conditioning, Data Acquisition and Instrumentation, Active Filters and Signal Conditioning, Process Control Loops, Voltage Buffering and Level Conditioning, Audio and Communication Interface Circuits.
Industrial Sensor Signal Conditioning
The LM2902KAVQPWREP is well suited to industrial sensor conditioning because its four independent amplifiers provide flexible channel allocation and its -40°C to 125°C rating supports extended-temperature equipment. A 2 mV input-offset specification is valuable when amplifying low-level sensor outputs, while the 1.2 MHz gain-bandwidth product is appropriate for many low-frequency pressure, temperature, and position signals. Each channel can provide buffering, gain, or active filtering. Confirm the sensor’s output impedance, common-mode voltage, and noise before fixing the gain, and verify that the output remains within the amplifier’s linear swing range.
おすすめ
Data Acquisition and Instrumentation
The LM2902KAVQPWREP supports compact data-acquisition front ends by combining four general-purpose operational amplifiers in one 14-pin TSSOP. One channel can amplify a sensor, another can buffer the reference, and the remaining channels can implement gain or filtering stages. Its 1.2 MHz gain-bandwidth product is suitable for moderate-bandwidth measurements, while the 2 mV input-offset voltage helps preserve low-level accuracy. The -40°C to 125°C operating range suits industrial instrumentation, but the final error budget should include input bias current, output swing, noise, and the selected external resistor tolerances.
おすすめ
Active Filters and Signal Conditioning
The LM2902KAVQPWREP can implement the active-filter and conditioning stages commonly found in control and measurement systems. Its four frequency-compensated amplifiers allow multiple filter sections or independent gain blocks to be consolidated in one package, and the 1.2 MHz gain-bandwidth product provides useful bandwidth for low-to-moderate-frequency filters. The 2 mV offset specification helps reduce DC error in low-frequency stages. Stability and response depend on the selected topology, resistor ratios, load, and noise gain, so simulate the complete network rather than evaluating each amplifier channel independently.
おすすめ
Process Control Loops
The LM2902KAVQPWREP is suitable for low-frequency process-control loops that need input buffering, error amplification, and output conditioning. Its four independent amplifier channels can handle separate stages without requiring four packages, and its 1.2 MHz bandwidth provides more capability than required by many slow control loops. The -40°C to 125°C operating range supports industrial environments. Validate the loop against the actuator and sensor limits, paying particular attention to output swing, capacitive loading, and any requirement for rail-to-rail operation at the selected supply voltage.
おすすめ
Voltage Buffering and Level Conditioning
The LM2902KAVQPWREP can buffer high-impedance sources before they drive downstream analog circuitry. Each internally compensated amplifier can operate as a voltage follower, reducing source-loading effects while the 1.2 MHz gain-bandwidth product provides ample bandwidth for many sensor and measurement signals. The 2 mV input-offset voltage helps maintain accurate DC levels, and the 14-pin TSSOP package supports compact board layouts. Check the common-mode input range, output swing, capacitive-load stability, and output-current demand for each buffered node before implementation.
おすすめ
Audio and Communication Interface Circuits
The LM2902KAVQPWREP can support low-frequency audio and communication interface functions such as input buffers, gain stages, and impedance matching. Four amplifiers in one 14-pin TSSOP reduce board space, while the 1.2 MHz gain-bandwidth product is suitable for many voice-band and low-frequency control paths. The device is not a rail-to-rail precision audio amplifier, so output swing and input range must be checked against the signal amplitude and supply rails. Input and feedback component tolerances should be included in the distortion and gain error analysis for precision paths.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: LM2902KAVQPWREP — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | LM2902KAVQPWRG4 | LM2902KAVQPW | LM324KPWR | LM324APWR |
|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 14-pin TSSOP (PW) | 14-pin TSSOP (PW) | 14-pin TSSOP (PW) | 14-pin TSSOP (PW) | 14-pin TSSOP |
| Gain-Bandwidth Product | 1.2 MHz | 1.2 MHz | 1.2 MHz | 1.2 MHz | 1.2 MHz |
主な差別化要因
- Extended-temperature enhanced-product grade (vs LM324APWR)
- Lower stated input-offset voltage (vs LM324APWR)
- Improved ESD protection rating (vs LM324KPWR)
- Matching bandwidth with broader package family options (vs LM2902KAVQPWRG4)
設計ノート
Confirm the total supply voltage and the input common-mode range before laying out the circuit. The LM2902KAVQPWREP is specified for a 26 V maximum supply rating and is not stated to be rail-to-rail. Operating close to a supply rail can therefore clip the output or violate an input limit. Use the manufacturer recommended operating conditions and leave transient margin when the supply is noisy or shares a board with switching circuitry.
Place each amplifier’s feedback components close to the associated input and output pins, and route high-impedance input nets away from switching nodes and digital clock lines. The four channels share V+ and V− connections, so supply-return paths should be low impedance. Keep the TSSOP footprint and pin assignments consistent with the manufacturer land pattern, and inspect the assembled board for solder bridges around the closely spaced leads.
Do not treat any 14-pin TSSOP quad amplifier as an automatic drop-in replacement. Verify pin assignments, common-mode input range, output swing, offset voltage, bias current, supply rating, and temperature grade. For LM324-family candidates, the documented 1.2 MHz class and 14-pin TSSOP format are useful starting points, but operation across the full -40°C to 125°C range and the target’s 2 kV ESD specification still require separate verification.
For high-gain or precision stages, calculate the noise gain at each frequency and verify that the 1.2 MHz gain-bandwidth product provides the required closed-loop bandwidth. Include resistor tolerances, input-offset voltage, input bias current, and output-swing margin in the error budget. If driving a capacitive load, keep the load within the stable operating region shown in the manufacturer datasheet and add isolation resistance when required.
コンプライアンス情報
The manufacturer identifies the target as an enhanced-product operational amplifier, but no explicit compliance statements were established for this exact MPN. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status from the current manufacturer product documentation before qualification.