STMicroelectronics

LM2904AYDT - Dual 1.1MHz Op Amp | STMicroelectronics

MPN: LM2904AYDT ✓ Aktif
Single positive supply Vdss 20 nA Id 8-pin SOIC Package Internal Speed
MOQ: 1 |

LM2904AYDT Ringkasan

The STMicroelectronics LM2904AYDT is a dual general-purpose operational amplifier with two independent, internally frequency-compensated amplifiers, a 1.1 MHz gain-bandwidth product, 0.6 V/us slew rate, and 20 nA input bias current. The device operates from a single positive supply and is packaged in an 8-pin SOIC for automotive and industrial control systems.

An operational amplifier is an analog signal-conditioning device that compares an inverting input with a non-inverting input and amplifies the voltage difference between them. The dual-amplifier configuration places two independent amplifiers in one package, allowing one IC to implement two signal paths. Within the broader semiconductor hierarchy, an operational amplifier belongs to the linear amplifier family and supports closed-loop gain, filtering, buffering, current-to-voltage conversion, and feedback-control applications.

The LM2904AYDT provides two independent channels, 1.1 MHz gain-bandwidth product, 0.6 V/us slew rate, and 20 nA input bias current. Its internally compensated architecture simplifies typical closed-loop amplifier use without an external frequency-compensation network. The low input bias current is useful when the amplifier must operate with relatively high source impedance, while the 1.1 MHz bandwidth supports general-purpose signal amplification at low and moderate frequencies.

The circuit is designed specifically for automotive and industrial control systems and operates from a single power supply over a wide voltage range. Both channels are independent, so they can process separate signals and do not share internal signal paths. The SOIC-8 package offers a compact surface-mount format compatible with conventional PCB assembly, while the automotive-oriented ordering code identifies the manufacturer’s grade and delivery configuration.

Typical uses include low-frequency sensor conditioning, industrial control-loop amplifiers, transducers with relatively high source impedance, buffer stages, and general signal-conditioning modules. Two channels can be used for a differential stage, a voltage follower and an active filter, or two independent control channels. The device is best suited to general-purpose precision amplification rather than high-speed, high-voltage, or low-noise applications requiring specialized amplifier families.

When laying out a PCB, keep input and feedback traces short, route them away from switching nodes, and provide a stable ground reference. Decouple each supply rail close to the device with suitable ceramic capacitance and avoid placing long output traces beside high-current digital paths. Because the SOIC-8 leads are closely spaced, inspect assembly clearances and ensure adequate copper and soldermask isolation under the package.

This page combines the manufacturer’s functional description with package, qualification, lifecycle, sourcing, and cross-reference information. It also provides application-focused engineering guidance and a parameter comparison table so engineers can evaluate the LM2904AYDT against other compatible SOIC-8 dual operational amplifiers before committing a design.

Alternatif penggantian untuk LM2904AYDT — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian LM2904AYDT (sama faktor bentuk dan footprint) — berbeda di dalam Slew Rate, Package, Amplifier Type, Gain-Bandwidth Product, Input Offset Voltage.

Texas Instruments
Slew Rate: 0.5 V/us (typical)
Package: SOIC-8 (D)
Input Offset Voltage: 0.5 mV typical / 3 mV maximum
Bandingkan dengan LM2904AYDT →
Texas Instruments
Slew Rate: 0.3 V/us
Package: 8-SOIC (D)
Amplifier Type: General Purpose
Bandingkan dengan LM2904AYDT →
onsemi
Amplifier Type: Dual general-purpose operational amplifier
Gain-Bandwidth Product: 1 MHz
Input Offset Voltage: 7 mV
Bandingkan dengan LM2904AYDT →
Texas Instruments
Slew Rate: 0.3 V/µs
Package: 8-SOIC (0.154, 3.90 mm width)
Amplifier Type: General Purpose
Bandingkan dengan LM2904AYDT →
STMicroelectronics
Amplifier Type: Low-power bipolar operational amplifier
Bandingkan dengan LM2904AYDT →
onsemi
Slew Rate: 13 V/us
Package: 8-PDIP, 0.300 inch (7.62 mm) pitch
Gain-Bandwidth Product: 4.5 MHz
Bandingkan dengan LM2904AYDT →

LM2904D

✅ Drop-In
Texas Instruments
📦 SOIC-8
2 · 3 V to 26 V · ±1.5 V to ±13 V · 700 kHz · 0.3 V/us · 2 mV (typical) · 500 uA (typical) · 0.7 mA (typical)

Kontak untuk harga

Lihat Datasheet →

LM2904BIDR

✅ Drop-In
Texas Instruments
📦 SOIC-8
Texas Instruments · Industry-standard dual operational amplifier · 2 (Dual) · 3 V to 36 V · +/-1.5 V to +/-18 V · 1.2 MHz · 0.5 V/us (typical) · 0.5 mV typical / 3 mV maximum

Kontak untuk harga

Lihat Datasheet →

LM2904BA

✅ Drop-In
📦 SOIC-8
LM2904BA is an enhanced LM2904-family option in the same SOIC-8 class, with potential differences of approximately 10% or less in the key ratings used for this comparison.

📋 Alternatif referensi (tidak dalam katalog)

TL082CP

✅ Drop-In
📦 SOIC-8
TL082CP is a dual JFET-input amplifier in SOIC-8; compared with the LM2904AYDT, the key differences are bipolar versus JFET input structure and associated offset, bias-current, noise, and bandwidth behavior.

📋 Alternatif referensi (tidak dalam katalog)

MC33072PG

✅ Drop-In
onsemi
📦 SOIC-8
General-purpose operational amplifier · 2 circuits · Voltage-feedback dual amplifier · Bipolar · 3.0 V to 44 V · Supported · Supported · 4.5 MHz

Kontak untuk harga

Lihat Datasheet →

NJM4558

✅ Drop-In
📦 SOIC-8
NJM4558 is cited as a comparable dual amplifier with the standard 8-pin arrangement; offset voltage and bandwidth differ from the LM2904AYDT by approximately 30% or less.

📋 Alternatif referensi (tidak dalam katalog)

LM2904AYDT Rating Maksimal & Karakteristik Listrik

Number of Amplifiers 2 circuits
Amplifier Type General-purpose operational amplifier
Channel Configuration 2 independent channels
Gain-Bandwidth Product 1.1 MHz
Slew Rate 0.6 V/us
Input Bias Current 20 nA
Supply Type Single positive supply
Frequency Compensation Internal
Paket 8-pin SOIC
Tipe Mounting Surface mount
Automotive Qualification AEC-Q100
Status RoHS Compliant
Lead-Free Status Lead-free
Moisture Sensitivity Level MSL 1 (unlimited)
Reel Quantity 2500 units
Manufacturer STMicroelectronics

Konfigurasi Pin LM2904AYDT

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Pin produk 1 OUT1 — Output of amplifier 1
Pin produk 2 -IN1 — Inverting input of amplifier 1
Pin produk 3 +IN1 — Non-inverting input of amplifier 1
Pin produk 4 V- — Negative supply or ground connection
Pin produk 5 +IN2 — Non-inverting input of amplifier 2
Pin produk 6 -IN2 — Inverting input of amplifier 2
Pin produk 7 OUT2 — Output of amplifier 2
Pin produk 8 V+ — Positive supply connection

Aplikasi Umum

LM2904AYDT cocok untuk 6 aplikasis: Automotive Sensor Conditioning, Industrial Control Loops, Active Filtering, Current-to-Voltage Conversion, Power Supply Feedback, Audio and Communication Buffers.

🚗

Automotive Sensor Conditioning

The LM2904AYDT fits low-frequency automotive sensor conditioning because it combines two independent general-purpose amplifiers with a 1.1 MHz gain-bandwidth product, 0.6 V/us slew rate, and AEC-Q100 qualification. Place one channel in a non-inverting or differential configuration to amplify a sensor output, while the second channel can provide buffering, level shifting, or active filtering. Its 20 nA input bias current helps limit loading when the sensor has moderate source impedance, although very high-impedance sensors may benefit from a FET-input amplifier. Validate the complete signal chain at the intended automotive supply voltage and temperature range, and keep sensitive input routes away from motors, relays, and inductive loads.

🏭

Industrial Control Loops

The LM2904AYDT is suitable for industrial control and monitoring blocks that amplify modest analog signals with relatively slow dynamics. Its two independent channels allow one amplifier to condition a feedback or error signal while the other drives an intermediary stage, and the internal frequency compensation simplifies conventional closed-loop layouts. A 1.1 MHz bandwidth and 0.6 V/us slew rate are ample for many temperature, pressure, and position-control signals, but not for high-bandwidth servo loops. Keep the feedback loop compact, provide local supply decoupling, and verify stability with the actual sensor cable and output loading because parasitic capacitance can alter the effective closed-loop response.

🔧

Active Filtering

The LM2904AYDT can implement active low-pass or band-pass networks when the signal bandwidth remains well below its 1.1 MHz gain-bandwidth product. Two independent amplifiers provide flexibility for a second-order filter or for cascaded stages, while internal frequency compensation avoids an external compensation capacitor in standard voltage-feedback configurations. The 0.6 V/us slew rate also limits how quickly the output can follow large step changes, so select component values so that the required full-scale bandwidth and slew rate remain below the device capability. Verify stability and transfer-function accuracy with the intended resistive and capacitive tolerances because parasitic values around the amplifier inputs can shift the filter response.

🖥️

Current-to-Voltage Conversion

The LM2904AYDT is appropriate for converting the output current of a sensor or photodiode into a voltage by using the amplifier in a transimpedance configuration. Its published 20 nA input bias current reduces the standing error associated with moderate feedback resistors, while two channels can provide a second buffer or reference channel. The 0.6 V/us slew rate helps preserve pulse amplitude in low-to-moderate-bandwidth measurements. Select the feedback resistor and compensation capacitor from the required transimpedance bandwidth rather than from gain alone, and keep the input node short and guarded because capacitance at the summing junction can destabilize the circuit.

⚡

Power Supply Feedback

The LM2904AYDT can monitor a power rail and provide an amplified error or limit signal for a supervisory system. The two internal channels permit one stage to sense the rail relative to ground and the other to amplify the result for an ADC, comparator, or controller input. Its 1.1 MHz bandwidth is substantially faster than most slow supervisory loops, and the 20 nA bias current is useful when the sensing network includes high resistance. The amplifier does not increase the power-rail rating, so use it only for sensing and ensure that its input common-mode range covers the minimum and maximum monitored voltage at all operating conditions.

🎧

Audio and Communication Buffers

The LM2904AYDT can serve as a general-purpose buffer for low-frequency audio or communication interface signals when very low noise and wide bandwidth are not required. A unity-gain voltage follower can isolate a higher-impedance source from a subsequent stage, while the second channel can provide gain or active filtering. The 1.1 MHz gain-bandwidth product supports signal paths well below audio frequencies, and the 0.6 V/us slew rate is generally adequate for these low-frequency signals. Check the required output swing, load current, input common-mode range, and stability with capacitive loads before using the device directly at an interface output.

What is the LM2904AYDT?
The LM2904AYDT is a dual general-purpose bipolar operational amplifier containing two independent, internally frequency-compensated amplifiers. STMicroelectronics identifies the circuit for automotive and industrial control systems, and the device operates from a single positive supply. Its key published characteristics include a 1.1 MHz gain-bandwidth product, 0.6 V/us slew rate, and approximately 20 nA input bias current.
What are the key specifications of LM2904AYDT that engineers should know?
The LM2904AYDT integrates two independent operational amplifiers in an 8-pin SOIC package. Published specifications include a 1.1 MHz gain-bandwidth product, 0.6 V/us slew rate, and 20 nA input bias current. Its internal frequency compensation simplifies standard closed-loop use, while its AEC-Q100 automotive qualification supports industrial and automotive control-system designs.
Is LM2904AYDT pin compatible with LM2904D?
Yes, the LM2904AYDT and LM2904D are based on the same dual SOIC-8 operational-amplifier architecture and are identified as pin-compatible replacements. Both provide two independent general-purpose amplifiers with internal compensation. The YDT version adds the manufacturer’s automotive-oriented ordering configuration, while electrical and temperature details should still be checked against each part’s individual datasheet.
What is the best drop-in replacement for LM2904AYDT?
The LM2904D is the closest same-family SOIC-8 drop-in candidate for the LM2904AYDT because both are dual LM2904 general-purpose amplifiers with the same 8-pin class of footprint and functional channel arrangement. The LM2904B, LM2904BA, TL082CP, and MC33072D are also cited as comparable parts, but offset, bandwidth, input bias, noise, supply range, and qualification should be compared before substitution.
What can replace LM2904AYDT in an automotive control circuit?
The LM2904AYDT can be replaced by a pin-compatible LM2904-family device only after confirming supply voltage, temperature range, input offset, input bias current, and automotive qualification. The LM2904D offers a familiar same-family option in SOIC-8, while the LM2904BA may be considered when its specific qualification and ordering details match the system requirements. Validate the completed substitution over the full automotive temperature and supply range.
What is the difference between LM2904AYDT and LM2904B?
The LM2904AYDT is the automotive-oriented LM2904 ordering option, while LM2904B belongs to the enhanced B-grade version of the same broad amplifier family. The available family information describes LM2904B as a pin-to-pin upgrade with improved functionality, but exact offset, bandwidth, noise, and temperature differences must be checked in the manufacturer datasheet for the selected package suffix.
When should I choose LM2904AYDT over TL082CP?
Choose the LM2904AYDT when the design specifically calls for the STMicroelectronics LM2904 automotive-qualified dual amplifier and its published 1.1 MHz bandwidth, 0.6 V/us slew rate, and 20 nA input bias characteristics. Consider the TL082CP only after checking its offset voltage, bias current, supply limits, noise, temperature range, and stability requirements against the LM2904AYDT.
Is the LM2904AYDT suitable for high-impedance sensor conditioning?
The LM2904AYDT is suitable for many moderate-impedance sensor-conditioning paths because its published input bias current is approximately 20 nA. Input bias current creates a voltage error across the sensor’s source impedance, so source resistance must remain compatible with that bias level. For very high source impedances, a FET-input amplifier may offer lower bias current and better source-loading behavior.
Where can I download the LM2904AYDT datasheet PDF?
The LM2904AYDT datasheet is available from the STMicroelectronics-linked document listed on the datasheet archive page and through the distributor product pages on this page. Use the manufacturer’s datasheet for definitive pin names, supply limits, electrical characteristics, recommended operating conditions, and application information. The datasheet connection is provided through the official product-documentation link above.
Where can I find the LM2904AYDT SOIC-8 pinout?
The LM2904AYDT pinout is shown on its 8-pin SOIC package diagram and described in the manufacturer datasheet. For the standard dual-amplifier arrangement, pins 1 and 7 are outputs, pins 2 and 6 are inverting inputs, pins 3 and 5 are non-inverting inputs, pin 4 is the negative supply or ground connection, and pin 8 is the positive supply. Verify the package diagram before PCB routing.
How should the LM2904AYDT be decoupled on a PCB?
Place the supply bypass capacitor close to pin 8 and connect the ground reference close to pin 4. Use short, low-inductance traces and include local ceramic decoupling according to the manufacturer’s recommended application circuit. Keep amplifier inputs and feedback paths away from switching-node copper, since capacitive coupling into a high-impedance input can create oscillation even when the nominal gain-bandwidth product is suitable.
Is LM2904AYDT in stock and what is its lead time?
Current stock and lead time can change, so use the Request a Quote form on this page for the latest exact-MPN availability, quantity, and delivery commitment. The manufacturer’s automotive ordering code and reel packaging identify the correct part, but they do not by themselves guarantee a current allocation. Provide the required quantity and target date when requesting the quotation.
Where can I buy LM2904AYDT online?
Use the Request a Quote form on this page to request LM2904AYDT pricing, stock, and lead time for the exact 8-pin SOIC ordering code. The request should include your required quantity, target delivery date, and approved sourcing terms. This avoids selecting a different reel suffix or a related LM2904 grade that may not match the original qualification and temperature requirements.
What is the price of LM2904AYDT?
Current pricing for the exact LM2904AYDT is available through the Request a Quote form on this page. The request should state the required quantity and reel or delivery configuration so the quotation corresponds to the precise automotive-oriented ordering code. Pricing can vary with quantity, component availability, date code, and market conditions.
Is LM2904AYDT the same as MC33072D?
The LM2904AYDT and MC33072D are comparable dual general-purpose SOIC-8 operational amplifiers, but they are not identical products. The MC33072 is identified as an equivalent family candidate, while the LM2904AYDT is specified at 1.1 MHz gain-bandwidth product, 0.6 V/us slew rate, and 20 nA input bias current. Verify offset, bandwidth, bias current, supply range, noise, and temperature limits before substitution.

Data referensi engineering untuk LM2904AYDT — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the LM2904AYDT when the design needs two independent general-purpose amplifiers in an 8-pin SOIC and requires the stated AEC-Q100 automotive qualification. Its published 1.1 MHz gain-bandwidth product, 0.6 V/us slew rate, and 20 nA input bias current are suitable for low-frequency sensor, control, monitoring, filtering, and buffering functions. Select LM2904D when the same basic LM2904 SOIC-8 architecture is sufficient without requiring the YDT automotive ordering configuration. Consider LM2904B or LM2904BA when their enhanced family-level electrical performance is preferable and qualification matches the product requirements. Choose TL082CP only when a JFET-input stage is specifically beneficial and its noise, offset, bandwidth, and stability behavior has been verified. MC33072 and NJM4558 can serve as cross-brand candidates, but each requires a full electrical and qualification review before replacing the LM2904AYDT.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini LM2904D LM2904B LM2904BA TL082CP MC33072 NJM4558
Brand STMicroelectronics Texas Instruments Texas Instruments Texas Instruments Texas Instruments onsemi JRC
Package SOIC-8 SOIC-8 - same SOIC-8 - same SOIC-8 - same SOIC-8 - same SOIC-8 - same SOIC-8 - same
Number of Amplifiers 2 circuits 2 circuits 2 circuits 2 circuits 2 circuits 2 circuits 2 circuits
Special Feature Automotive and industrial control applications General-purpose dual amplifier Enhanced pin-to-pin upgrade Enhanced LM2904-family option JFET-input dual amplifier Equivalent dual amplifier family option Comparable dual amplifier family option

Diferensiator Kunci

  • Automotive-qualified dual general-purpose amplifier (vsLM2904D)
  • Published low input bias current for general-purpose bipolar operation (vsTL082CP)
  • Two independent channels in one compact package (vsMC33072)

Catatan Desain

Route each input and feedback connection directly to the corresponding SOIC-8 pin without test-point stubs or long loops. Place the supply bypass capacitor adjacent to pin 8 and provide a short return path to pin 4. High-impedance input nodes should remain away from switching inductors, motor traces, and long exposed copper because parasitic coupling can produce output oscillation or misleading transient readings.

Treat the two amplifier channels as independent layouts even though they share a package and supply pins. Maintain symmetry where matched channel behavior matters, and keep feedback components close to the relevant output and inverting-input pins. Avoid routing one channel’s output near the other channel’s input, since shared-package coupling can reduce isolation in precision measurement or audio-control circuits.

Do not assume that an amplifier with the same SOIC-8 footprint is electrically interchangeable. Before substituting LM2904D, LM2904B, TL082CP, MC33072, or NJM4558, check supply voltage, input common-mode range, output swing, offset voltage, input bias current, noise, bandwidth, slew rate, temperature grade, and automotive qualification. Validate stability with the actual feedback network and output loading.

The 1.1 MHz gain-bandwidth product and 0.6 V/us slew rate define useful limits for closed-loop bandwidth and large-signal response. Keep the desired closed-loop bandwidth comfortably below the gain-bandwidth product to preserve phase margin, and verify large-step settling time when slew-rate-limited. At higher closed-loop gains, additional feedback-network compensation or a different amplifier family may be required.

Informasi Konformitas

RoHS
Compliant
REACH
Unknown
AEC-Q100
Qualified
Bebas Logam Lengket
Yes
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The component is identified as RoHS-compliant and lead-free. The manufacturer-family information identifies the device for automotive applications and lists AEC-Q100 qualification. REACH, halogen-free status, and conflict-minerals status were not established.

Pencarian Terkait

LM2904AYDT datasheet LM2904AYDT pinout LM2904AYDT datasheet pdf LM2904AYDT equivalent LM2904AYDT replacement LM2904AYDT cross reference LM2904AYDT vs LM2904D LM2904AYDT price LM2904AYDT stock STMicroelectronics LM2904AYDT LM2904AYDT SOIC-8 footprint LM2904AYDT application circuit

Komponen dan Istilah Terkait

STMicroelectronics LM2904AYDT LM2904D LM2904B LM2904BA TL082CP MC33072 NJM4558 operational amplifier dual operational amplifier general-purpose amplifier linear amplifier analog semiconductor bipolar input stage JFET input stage single-supply amplifier SOIC-8 surface-mount package gain-bandwidth product slew rate input bias current frequency compensation AEC-Q100 RoHS automotive control systems
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ