LM2904AYDT - Dual 1.1MHz Op Amp | STMicroelectronics
부품 번호: LM2904AYDT ✓ 활성LM2904AYDT 개요
An operational amplifier is an analog signal-conditioning device that compares an inverting input with a non-inverting input and amplifies the voltage difference between them. The dual-amplifier configuration places two independent amplifiers in one package, allowing one IC to implement two signal paths. Within the broader semiconductor hierarchy, an operational amplifier belongs to the linear amplifier family and supports closed-loop gain, filtering, buffering, current-to-voltage conversion, and feedback-control applications.
The LM2904AYDT provides two independent channels, 1.1 MHz gain-bandwidth product, 0.6 V/us slew rate, and 20 nA input bias current. Its internally compensated architecture simplifies typical closed-loop amplifier use without an external frequency-compensation network. The low input bias current is useful when the amplifier must operate with relatively high source impedance, while the 1.1 MHz bandwidth supports general-purpose signal amplification at low and moderate frequencies.
The circuit is designed specifically for automotive and industrial control systems and operates from a single power supply over a wide voltage range. Both channels are independent, so they can process separate signals and do not share internal signal paths. The SOIC-8 package offers a compact surface-mount format compatible with conventional PCB assembly, while the automotive-oriented ordering code identifies the manufacturer’s grade and delivery configuration.
Typical uses include low-frequency sensor conditioning, industrial control-loop amplifiers, transducers with relatively high source impedance, buffer stages, and general signal-conditioning modules. Two channels can be used for a differential stage, a voltage follower and an active filter, or two independent control channels. The device is best suited to general-purpose precision amplification rather than high-speed, high-voltage, or low-noise applications requiring specialized amplifier families.
When laying out a PCB, keep input and feedback traces short, route them away from switching nodes, and provide a stable ground reference. Decouple each supply rail close to the device with suitable ceramic capacitance and avoid placing long output traces beside high-current digital paths. Because the SOIC-8 leads are closely spaced, inspect assembly clearances and ensure adequate copper and soldermask isolation under the package.
This page combines the manufacturer’s functional description with package, qualification, lifecycle, sourcing, and cross-reference information. It also provides application-focused engineering guidance and a parameter comparison table so engineers can evaluate the LM2904AYDT against other compatible SOIC-8 dual operational amplifiers before committing a design.
드롭인 대체품: LM2904AYDT — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: LM2904AYDT (동일 폼 팩터 및 풋프린트) — 차이점: Slew Rate, Package, Amplifier Type, Gain-Bandwidth Product, Input Offset Voltage.
LM2904D
✅ 드롭인가격 문의
데이터시트 보기 →LM2904BIDR
✅ 드롭인가격 문의
데이터시트 보기 →LM2904BA
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
TL082CP
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MC33072PG
✅ 드롭인가격 문의
데이터시트 보기 →NJM4558
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
LM2904AYDT 최대 정격 & 전기적 특성
| Number of Amplifiers | 2 circuits |
| Amplifier Type | General-purpose operational amplifier |
| Channel Configuration | 2 independent channels |
| Gain-Bandwidth Product | 1.1 MHz |
| Slew Rate | 0.6 V/us |
| Input Bias Current | 20 nA |
| Supply Type | Single positive supply |
| Frequency Compensation | Internal |
| 패키지 | 8-pin SOIC |
| 실장 유형 | Surface mount |
| Automotive Qualification | AEC-Q100 |
| RoHS 상태 | Compliant |
| Lead-Free Status | Lead-free |
| Moisture Sensitivity Level | MSL 1 (unlimited) |
| Reel Quantity | 2500 units |
| Manufacturer | STMicroelectronics |
LM2904AYDT 핀 구성
| 핀 1 | OUT1 — Output of amplifier 1 |
| 핀 2 | -IN1 — Inverting input of amplifier 1 |
| 핀 3 | +IN1 — Non-inverting input of amplifier 1 |
| 핀 4 | V- — Negative supply or ground connection |
| 핀 5 | +IN2 — Non-inverting input of amplifier 2 |
| 핀 6 | -IN2 — Inverting input of amplifier 2 |
| 핀 7 | OUT2 — Output of amplifier 2 |
| 핀 8 | V+ — Positive supply connection |
일반적인 애플리케이션
LM2904AYDT 적합 용도: 6 애플리케이션s: Automotive Sensor Conditioning, Industrial Control Loops, Active Filtering, Current-to-Voltage Conversion, Power Supply Feedback, Audio and Communication Buffers.
Automotive Sensor Conditioning
The LM2904AYDT fits low-frequency automotive sensor conditioning because it combines two independent general-purpose amplifiers with a 1.1 MHz gain-bandwidth product, 0.6 V/us slew rate, and AEC-Q100 qualification. Place one channel in a non-inverting or differential configuration to amplify a sensor output, while the second channel can provide buffering, level shifting, or active filtering. Its 20 nA input bias current helps limit loading when the sensor has moderate source impedance, although very high-impedance sensors may benefit from a FET-input amplifier. Validate the complete signal chain at the intended automotive supply voltage and temperature range, and keep sensitive input routes away from motors, relays, and inductive loads.
추천
Industrial Control Loops
The LM2904AYDT is suitable for industrial control and monitoring blocks that amplify modest analog signals with relatively slow dynamics. Its two independent channels allow one amplifier to condition a feedback or error signal while the other drives an intermediary stage, and the internal frequency compensation simplifies conventional closed-loop layouts. A 1.1 MHz bandwidth and 0.6 V/us slew rate are ample for many temperature, pressure, and position-control signals, but not for high-bandwidth servo loops. Keep the feedback loop compact, provide local supply decoupling, and verify stability with the actual sensor cable and output loading because parasitic capacitance can alter the effective closed-loop response.
추천
Active Filtering
The LM2904AYDT can implement active low-pass or band-pass networks when the signal bandwidth remains well below its 1.1 MHz gain-bandwidth product. Two independent amplifiers provide flexibility for a second-order filter or for cascaded stages, while internal frequency compensation avoids an external compensation capacitor in standard voltage-feedback configurations. The 0.6 V/us slew rate also limits how quickly the output can follow large step changes, so select component values so that the required full-scale bandwidth and slew rate remain below the device capability. Verify stability and transfer-function accuracy with the intended resistive and capacitive tolerances because parasitic values around the amplifier inputs can shift the filter response.
추천
Current-to-Voltage Conversion
The LM2904AYDT is appropriate for converting the output current of a sensor or photodiode into a voltage by using the amplifier in a transimpedance configuration. Its published 20 nA input bias current reduces the standing error associated with moderate feedback resistors, while two channels can provide a second buffer or reference channel. The 0.6 V/us slew rate helps preserve pulse amplitude in low-to-moderate-bandwidth measurements. Select the feedback resistor and compensation capacitor from the required transimpedance bandwidth rather than from gain alone, and keep the input node short and guarded because capacitance at the summing junction can destabilize the circuit.
추천
Power Supply Feedback
The LM2904AYDT can monitor a power rail and provide an amplified error or limit signal for a supervisory system. The two internal channels permit one stage to sense the rail relative to ground and the other to amplify the result for an ADC, comparator, or controller input. Its 1.1 MHz bandwidth is substantially faster than most slow supervisory loops, and the 20 nA bias current is useful when the sensing network includes high resistance. The amplifier does not increase the power-rail rating, so use it only for sensing and ensure that its input common-mode range covers the minimum and maximum monitored voltage at all operating conditions.
추천
Audio and Communication Buffers
The LM2904AYDT can serve as a general-purpose buffer for low-frequency audio or communication interface signals when very low noise and wide bandwidth are not required. A unity-gain voltage follower can isolate a higher-impedance source from a subsequent stage, while the second channel can provide gain or active filtering. The 1.1 MHz gain-bandwidth product supports signal paths well below audio frequencies, and the 0.6 V/us slew rate is generally adequate for these low-frequency signals. Check the required output swing, load current, input common-mode range, and stability with capacitive loads before using the device directly at an interface output.
추천
추천 제품 요약
엔지니어링 참조 데이터: LM2904AYDT — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | LM2904D | LM2904B | LM2904BA | TL082CP | MC33072 | NJM4558 |
|---|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | onsemi | JRC |
| Package | SOIC-8 | SOIC-8 - same | SOIC-8 - same | SOIC-8 - same | SOIC-8 - same | SOIC-8 - same | SOIC-8 - same |
| Number of Amplifiers | 2 circuits | 2 circuits | 2 circuits | 2 circuits | 2 circuits | 2 circuits | 2 circuits |
| Special Feature | Automotive and industrial control applications | General-purpose dual amplifier | Enhanced pin-to-pin upgrade | Enhanced LM2904-family option | JFET-input dual amplifier | Equivalent dual amplifier family option | Comparable dual amplifier family option |
주요 차별점
- Automotive-qualified dual general-purpose amplifier (vs LM2904D)
- Published low input bias current for general-purpose bipolar operation (vs TL082CP)
- Two independent channels in one compact package (vs MC33072)
설계 노트
Route each input and feedback connection directly to the corresponding SOIC-8 pin without test-point stubs or long loops. Place the supply bypass capacitor adjacent to pin 8 and provide a short return path to pin 4. High-impedance input nodes should remain away from switching inductors, motor traces, and long exposed copper because parasitic coupling can produce output oscillation or misleading transient readings.
Treat the two amplifier channels as independent layouts even though they share a package and supply pins. Maintain symmetry where matched channel behavior matters, and keep feedback components close to the relevant output and inverting-input pins. Avoid routing one channel’s output near the other channel’s input, since shared-package coupling can reduce isolation in precision measurement or audio-control circuits.
Do not assume that an amplifier with the same SOIC-8 footprint is electrically interchangeable. Before substituting LM2904D, LM2904B, TL082CP, MC33072, or NJM4558, check supply voltage, input common-mode range, output swing, offset voltage, input bias current, noise, bandwidth, slew rate, temperature grade, and automotive qualification. Validate stability with the actual feedback network and output loading.
The 1.1 MHz gain-bandwidth product and 0.6 V/us slew rate define useful limits for closed-loop bandwidth and large-signal response. Keep the desired closed-loop bandwidth comfortably below the gain-bandwidth product to preserve phase margin, and verify large-step settling time when slew-rate-limited. At higher closed-loop gains, additional feedback-network compensation or a different amplifier family may be required.
규정 준수 정보
The component is identified as RoHS-compliant and lead-free. The manufacturer-family information identifies the device for automotive applications and lists AEC-Q100 qualification. REACH, halogen-free status, and conflict-minerals status were not established.