LM2904BQDRQ1 - Dual 36V 1.2MHz Op Amp | Texas Instruments
MPN: LM2904BQDRQ1 ✓ AktifLM2904BQDRQ1 Ringkasan
An operational amplifier is a voltage-feedback amplifier that uses high open-loop gain to amplify the difference between its inverting and non-inverting inputs. The LM2904B-Q1 belongs to the broader operational-amplifier, analog-signal-conditioning, and semiconductor hierarchy. Its two amplifier channels can process independent signals or work together as a differential amplifier, buffer, comparator-style circuit, or active-filter stage when supported by the surrounding network.
The principal feature set includes two amplifier circuits, a 36 V maximum supply rating, a 1.2 MHz gain-bandwidth product, and an operating-temperature range of -40°C to 125°C. The automotive-grade ordering option is designed for applications that require operation across an extended industrial temperature range. The standard general-purpose amplifier designation also indicates that the device is intended for a broad range of conventional analog signal-processing tasks rather than one narrowly defined precision function.
In each channel, feedback determines closed-loop gain and bandwidth. Negative feedback stabilizes gain, reduces distortion, and improves linearity, while positive or open-loop use can support comparator-style functions when the system design requires saturation behavior rather than linear amplification. Because the device operates from a relatively wide supply range, designers must check input- and output-voltage limits, input common-mode range, output swing, and power dissipation against the actual rail voltages rather than relying only on the 36 V maximum rating.
Typical applications include automotive sensor interfaces, industrial control and instrumentation, low-side current measurement, transducer amplification, analog filtering, audio and communication signal conditioning, and general feedback-control loops. In each case, the two channels can reduce component count when the circuit requires one signal-processing path and one feedback or auxiliary path on the same package footprint.
A careful design should verify the input common-mode range, output-voltage swing, unity-gain stability, noise performance, and maximum output current against the selected gain and load. Input and output stability networks, grounding, and decoupling also require attention because excessive capacitive loading or incorrect source impedance can alter stability and transient response. The 8-pin SOIC footprint is suitable for conventional surface-mount assembly, although exposed-pad thermal considerations do not apply to this package.
This product record combines manufacturer specifications, automotive qualification information, package details, application guidance, and constrained drop-in alternatives. It also highlights where engineers should compare speed, supply range, common-mode limits, and automotive requirements before changing the amplifier in an existing circuit.
Alternatif penggantian untuk LM2904BQDRQ1 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian LM2904BQDRQ1 (sama faktor bentuk dan footprint) — berbeda di dalam Number of Channels, Operating Temperature Range, Package.
LM2904BIPAR
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
LM2904BIDR
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →LM2904BDR
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
LM2904BQDRQ1 Rating Maksimal & Karakteristik Listrik
| Amplifier Type | General-purpose operational amplifier |
| Number of Channels | 2 channels |
| Circuit Count | 2 circuits |
| Maximum Supply Voltage | 36 V |
| Gain-Bandwidth Product | 1.2 MHz |
| Rentang Suhu Kerja | -40°C to 125°C |
| Automotive Qualification | Automotive grade |
| Paket | 8-pin SOIC |
| Tipe Mounting | Surface mount |
LM2904BQDRQ1 8-pin soic Diamant Konfigurasi Panduan
Konfigurasi pin untuk LM2904BQDRQ1 (8-pin soic pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.
Tidak ada data diatribut pin yang tersedia untuk LM2904BQDRQ1.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
LM2904BQDRQ1 cocok untuk 6 aplikasis: Automotive Sensor Signal Conditioning, Industrial Control and Instrumentation, Low-Side Current Measurement, Active Filtering and Signal Conditioning, Audio and Communication Signal Conditioning, Feedback Control and Voltage Monitoring.
Automotive Sensor Signal Conditioning
The LM2904BQDRQ1 fits automotive sensor interfaces that require two general-purpose amplifier channels, a 36 V supply rating, and operation from -40°C to 125°C. One channel can amplify or level-shift a sensor output while the second handles feedback, filtering, or an auxiliary signal path. Its 1.2 MHz gain-bandwidth product provides useful bandwidth for many low- to moderate-frequency vehicle sensors. The implementation must remain within the input common-mode range and output-swing limits throughout the vehicle supply range. Input filtering, ESD protection, grounding, and fault diagnostics should be designed around the sensor source impedance and wiring environment.
Direkomendasikan
Industrial Control and Instrumentation
The LM2904BQDRQ1 is appropriate for industrial control and measurement circuits that combine analog amplification with a wide operating temperature range. Its two channels can implement an instrumentation stage, a voltage follower, or a pair of conditioning paths within one 8-pin SOIC package. The 1.2 MHz gain-bandwidth product supports common low-frequency process-control signals, while the 36 V supply rating accommodates higher-voltage industrial interfaces when operated within the recommended electrical limits. Designers should validate common-mode range, offset, noise, capacitive-load behavior, and output drive at the lowest expected supply voltage.
Direkomendasikan
Low-Side Current Measurement
The LM2904BQDRQ1 can amplify the small voltage developed across a low-side current-sense resistor when the signal bandwidth does not require a high-speed amplifier. One channel provides the gain path, while the second can create a reference or monitor another voltage. The 36 V rating is useful when the shunt sits in a higher-voltage supply path, and the 1.2 MHz gain-bandwidth product is adequate for many slower current measurements. Kelvin routing, input-offset error, noise, and common-mode limits should be reviewed carefully because they directly affect measurement accuracy and channel matching.
Direkomendasikan
Active Filtering and Signal Conditioning
The dual-channel LM2904BQDRQ1 is useful for first- and second-order active-filter stages that shape analog signals before conversion or measurement. Its two amplifiers can implement separate filter sections or support an input buffer and filter path, reducing package count. The 1.2 MHz gain-bandwidth product defines the available closed-loop bandwidth, so resistor and capacitor values must be selected to preserve stability and the intended response. Texas Instruments describes the device as a general-purpose dual amplifier, which makes it suitable for conventional continuous-time filtering when its input, output, and common-mode limits fit the signal.
Direkomendasikan
Audio and Communication Signal Conditioning
The LM2904BQDRQ1 can serve as a general-purpose gain stage in audio, interface, or communications equipment where two channels and moderate bandwidth are sufficient. The 1.2 MHz gain-bandwidth product allows closed-loop gains to be selected while retaining adequate bandwidth for many baseband conditioning paths. The amplifier is not presented as a low-noise audio component, so noise and distortion limits must be checked against the signal budget. The 8-pin SOIC package also simplifies conventional surface-mount assembly. Stable feedback ratios, careful grounding, and suitable output loading are essential for predictable response.
Direkomendasikan
Feedback Control and Voltage Monitoring
The LM2904BQDRQ1 fits feedback-control and voltage-monitoring circuits requiring an amplifier that can operate across -40°C to 125°C. Its two channels can form a feedback amplifier and a supervisory signal path within one package. The 36 V supply rating supports higher-voltage systems, but the exact operating supply range, input common-mode limits, and output swing must be checked before use. Designers should include suitable compensation for sensor or actuator dynamics, verify output-current demand, and provide stable reference and bypass networks to avoid oscillation or degraded control response.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk LM2904BQDRQ1 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | LM2904BIPAR | LM2904BIDR | LM2904BDR |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC |
| Number of Channels | 2 channels | 2 channels | 2 channels | 2 channels |
| Maximum Supply Voltage | 36 V | 36 V | 36 V | 36 V |
| Gain-Bandwidth Product | 1.2 MHz | 1.2 MHz | 1.2 MHz | 1.2 MHz |
| Operating Temperature Range | -40°C to 125°C | -40°C to 125°C | -40°C to 125°C | -40°C to 125°C |
Diferensiator Kunci
- Automotive-qualified ordering option with extended temperature operation (vsLM2904BDR)
- Two general-purpose channels in a compact 8-pin SOIC (vsLM2904BIDR)
- Wide 36 V supply capability for higher-voltage analog systems (vsLM2904BIPAR)
Catatan Desain
Verify input common-mode voltage, output swing, and output-current requirements at the minimum and maximum system supply conditions. A 36 V maximum supply rating is a stress ceiling, not permission to operate every input and output at every rail voltage. For non-inverting biasing, calculate the closed-loop operating point before selecting resistor values; for inverting configurations, confirm that the input common-mode range remains valid throughout signal and tolerance extremes.
Place the power-supply bypass capacitor close to the device supply pin and return it directly to the ground plane. Keep the amplifier input and feedback traces short, and avoid routing them adjacent to switching nodes or high-current return paths. Because the two channels share the package and supply pins, their decoupling requirements are not independent: one effective bypass network must support both channels, particularly when one channel drives a higher capacitive load than the other.
Check closed-loop stability against the source impedance and load capacitance. A high-value feedback resistor can combine with input capacitance to alter phase margin, while a large capacitive load can cause ringing or oscillation. The 1.2 MHz gain-bandwidth product provides the basis for stability and bandwidth analysis, but the external network must be evaluated at every intended gain setting rather than assuming the amplifier is stable with every resistive and capacitive combination.
Estimated: amplifier dissipation depends on the actual supply, quiescent current, output swing, load, and duty cycle. Calculate P = VIN × IQ plus the output-current contribution and compare the resulting junction-temperature estimate with the device limit. Use the widest copper area practical for the 8-pin SOIC layout, maintain unobstructed thermal paths, and avoid locating the device next to a high-temperature source. No numerical thermal rating is asserted without the manufacturer junction-temperature and package data.
Informasi Konformitas
Texas Instruments identifies the LM2904B-Q1 as automotive grade, but no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement is present in the referenced product information.