Texas Instruments

LM2904BQDRQ1 - Dual 36V 1.2MHz Op Amp | Texas Instruments

MPN: LM2904BQDRQ1 ✓ 啟用中
36 V Vdss 8-pin SOIC Package
MOQ: 1 |

LM2904BQDRQ1 概覽

The Texas Instruments LM2904BQDRQ1 is an automotive-grade, dual operational amplifier with a 36 V supply rating, 1.2 MHz gain-bandwidth performance, and operation from -40°C to 125°C, housed in an 8-pin SOIC package. It combines two independent general-purpose amplifiers, making it suitable for signal conditioning, filtering, sensing, and feedback-control circuits operating from low-voltage to higher-voltage industrial and vehicle systems.

An operational amplifier is a voltage-feedback amplifier that uses high open-loop gain to amplify the difference between its inverting and non-inverting inputs. The LM2904B-Q1 belongs to the broader operational-amplifier, analog-signal-conditioning, and semiconductor hierarchy. Its two amplifier channels can process independent signals or work together as a differential amplifier, buffer, comparator-style circuit, or active-filter stage when supported by the surrounding network.

The principal feature set includes two amplifier circuits, a 36 V maximum supply rating, a 1.2 MHz gain-bandwidth product, and an operating-temperature range of -40°C to 125°C. The automotive-grade ordering option is designed for applications that require operation across an extended industrial temperature range. The standard general-purpose amplifier designation also indicates that the device is intended for a broad range of conventional analog signal-processing tasks rather than one narrowly defined precision function.

In each channel, feedback determines closed-loop gain and bandwidth. Negative feedback stabilizes gain, reduces distortion, and improves linearity, while positive or open-loop use can support comparator-style functions when the system design requires saturation behavior rather than linear amplification. Because the device operates from a relatively wide supply range, designers must check input- and output-voltage limits, input common-mode range, output swing, and power dissipation against the actual rail voltages rather than relying only on the 36 V maximum rating.

Typical applications include automotive sensor interfaces, industrial control and instrumentation, low-side current measurement, transducer amplification, analog filtering, audio and communication signal conditioning, and general feedback-control loops. In each case, the two channels can reduce component count when the circuit requires one signal-processing path and one feedback or auxiliary path on the same package footprint.

A careful design should verify the input common-mode range, output-voltage swing, unity-gain stability, noise performance, and maximum output current against the selected gain and load. Input and output stability networks, grounding, and decoupling also require attention because excessive capacitive loading or incorrect source impedance can alter stability and transient response. The 8-pin SOIC footprint is suitable for conventional surface-mount assembly, although exposed-pad thermal considerations do not apply to this package.

This product record combines manufacturer specifications, automotive qualification information, package details, application guidance, and constrained drop-in alternatives. It also highlights where engineers should compare speed, supply range, common-mode limits, and automotive requirements before changing the amplifier in an existing circuit.

直接替換替代品,適用於 LM2904BQDRQ1 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: LM2904BQDRQ1 (相同外形與佔位) — 差異在於 Number of Channels, Operating Temperature Range, Package.

Texas Instruments
Number of Channels: 2 (Dual)
Operating Temperature Range: -40 C to +125 C
Package: SOIC-8 (D)
比較對象 LM2904BQDRQ1 →

LM2904BIPAR

✅ 直接替換 ⚠️ 規格未經驗證
📦 8-SOIC
Same LM2904B family architecture; 0% difference in the defined 2-channel, 36 V, 1.2 MHz, and -40°C to 125°C family ratings, with ordering qualification requiring confirmation

📋 參考替代品(不在目錄中)

LM2904BIDR

✅ 直接替換 ⚠️ 規格未經驗證
Texas Instruments
📦 8-SOIC
Texas Instruments · Industry-standard dual operational amplifier · 2 (Dual) · 3 V to 36 V · +/-1.5 V to +/-18 V · 1.2 MHz · 0.5 V/us (typical) · 0.5 mV typical / 3 mV maximum

聯絡詢價

查看資料表 →

LM2904BDR

✅ 直接替換 ⚠️ 規格未經驗證
📦 8-SOIC
Same LM2904B family architecture; 0% difference in the defined 2-channel, 36 V, 1.2 MHz, and -40°C to 125°C family ratings, with ordering qualification requiring confirmation

📋 參考替代品(不在目錄中)

LM2904BQDRQ1 最大額定值與電氣特性

Amplifier Type General-purpose operational amplifier
Number of Channels 2 channels
Circuit Count 2 circuits
Maximum Supply Voltage 36 V
Gain-Bandwidth Product 1.2 MHz
工作溫度範圍 -40°C to 125°C
Automotive Qualification Automotive grade
封裝 8-pin SOIC
安裝類型 Surface mount

LM2904BQDRQ1 8-pin soic 腳位配置指南

LM2904BQDRQ1(8-pin soic 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。

LM2904BQDRQ1 的 8-pin soic 封裝腳位圖

無詳細腳位定義資料: LM2904BQDRQ1.

請參閱 資料表 以查看完整腳位配置。

典型應用

LM2904BQDRQ1 適用於 6 應用s: Automotive Sensor Signal Conditioning, Industrial Control and Instrumentation, Low-Side Current Measurement, Active Filtering and Signal Conditioning, Audio and Communication Signal Conditioning, Feedback Control and Voltage Monitoring.

🚗

Automotive Sensor Signal Conditioning

The LM2904BQDRQ1 fits automotive sensor interfaces that require two general-purpose amplifier channels, a 36 V supply rating, and operation from -40°C to 125°C. One channel can amplify or level-shift a sensor output while the second handles feedback, filtering, or an auxiliary signal path. Its 1.2 MHz gain-bandwidth product provides useful bandwidth for many low- to moderate-frequency vehicle sensors. The implementation must remain within the input common-mode range and output-swing limits throughout the vehicle supply range. Input filtering, ESD protection, grounding, and fault diagnostics should be designed around the sensor source impedance and wiring environment.

🏭

Industrial Control and Instrumentation

The LM2904BQDRQ1 is appropriate for industrial control and measurement circuits that combine analog amplification with a wide operating temperature range. Its two channels can implement an instrumentation stage, a voltage follower, or a pair of conditioning paths within one 8-pin SOIC package. The 1.2 MHz gain-bandwidth product supports common low-frequency process-control signals, while the 36 V supply rating accommodates higher-voltage industrial interfaces when operated within the recommended electrical limits. Designers should validate common-mode range, offset, noise, capacitive-load behavior, and output drive at the lowest expected supply voltage.

⚡

Low-Side Current Measurement

The LM2904BQDRQ1 can amplify the small voltage developed across a low-side current-sense resistor when the signal bandwidth does not require a high-speed amplifier. One channel provides the gain path, while the second can create a reference or monitor another voltage. The 36 V rating is useful when the shunt sits in a higher-voltage supply path, and the 1.2 MHz gain-bandwidth product is adequate for many slower current measurements. Kelvin routing, input-offset error, noise, and common-mode limits should be reviewed carefully because they directly affect measurement accuracy and channel matching.

🔧

Active Filtering and Signal Conditioning

The dual-channel LM2904BQDRQ1 is useful for first- and second-order active-filter stages that shape analog signals before conversion or measurement. Its two amplifiers can implement separate filter sections or support an input buffer and filter path, reducing package count. The 1.2 MHz gain-bandwidth product defines the available closed-loop bandwidth, so resistor and capacitor values must be selected to preserve stability and the intended response. Texas Instruments describes the device as a general-purpose dual amplifier, which makes it suitable for conventional continuous-time filtering when its input, output, and common-mode limits fit the signal.

🌐

Audio and Communication Signal Conditioning

The LM2904BQDRQ1 can serve as a general-purpose gain stage in audio, interface, or communications equipment where two channels and moderate bandwidth are sufficient. The 1.2 MHz gain-bandwidth product allows closed-loop gains to be selected while retaining adequate bandwidth for many baseband conditioning paths. The amplifier is not presented as a low-noise audio component, so noise and distortion limits must be checked against the signal budget. The 8-pin SOIC package also simplifies conventional surface-mount assembly. Stable feedback ratios, careful grounding, and suitable output loading are essential for predictable response.

📺

Feedback Control and Voltage Monitoring

The LM2904BQDRQ1 fits feedback-control and voltage-monitoring circuits requiring an amplifier that can operate across -40°C to 125°C. Its two channels can form a feedback amplifier and a supervisory signal path within one package. The 36 V supply rating supports higher-voltage systems, but the exact operating supply range, input common-mode limits, and output swing must be checked before use. Designers should include suitable compensation for sensor or actuator dynamics, verify output-current demand, and provide stable reference and bypass networks to avoid oscillation or degraded control response.

What is the LM2904BQDRQ1?
The LM2904BQDRQ1 is a Texas Instruments automotive-grade, dual operational amplifier designed for general-purpose analog signal processing. According to the manufacturer product information, it operates from a 36 V supply rating, has a 1.2 MHz gain-bandwidth product, and supports an operating range of -40°C to 125°C. Its two independent amplifier channels and 8-pin SOIC package make it suitable for industrial control, vehicle electronics, sensor conditioning, filtering, and feedback applications.
What are the key specifications of LM2904BQDRQ1 that engineers should know?
The key LM2904BQDRQ1 specifications are two amplifier channels, a 36 V maximum supply rating, a 1.2 MHz gain-bandwidth product, and operation from -40°C to 125°C. According to the Texas Instruments LM2904B-Q1 product information, the device is automotive grade and comes in an 8-pin SOIC package. Engineers should also verify input common-mode limits, output swing, offset voltage, slew rate, and load capability in the manufacturer datasheet before finalizing a gain or biasing configuration.
What is the operating voltage range of LM2904BQDRQ1?
The LM2904BQDRQ1 has a 36 V maximum supply rating, but its usable operating supply range must be confirmed from the device electrical characteristics. According to the Texas Instruments LM2904B-Q1 documentation, the amplifier is designed for automotive-grade operation from -40°C to 125°C. The maximum rating is an absolute stress limit rather than a recommended operating condition, so supply selection must also satisfy the common-mode, output-swing, and dissipation limits for the selected amplifier configuration.
Where can I download the LM2904BQDRQ1 datasheet PDF?
The official LM2904BQDRQ1 documentation is available through the Texas Instruments LM2904B-Q1 product page, which links to the manufacturer datasheet and ordering information. The part is also indexed under the LM2904B-Q1 family because LM2904BQDRQ1 is an ordering option within that device family. For design work, use the manufacturer document to confirm the complete pin description, electrical characteristics, recommended operating conditions, and automotive qualification information.
Where can I find the LM2904BQDRQ1 pinout?
The LM2904BQDRQ1 pin assignment is documented in the pin-configuration section of the Texas Instruments LM2904B-Q1 datasheet. The device uses an 8-pin SOIC package with two operational amplifiers. Assign the pins by following the numbered package drawing and its input, output, supply, and bypass connections rather than relying only on a generic LM2904 diagram, because ordering suffixes do not normally change the electrical pinout but package drawings should still be checked for the exact assembled device.
Is LM2904BQDRQ1 suitable for automotive applications?
The LM2904BQDRQ1 is identified by Texas Instruments as an automotive-grade LM2904B-Q1 device with operation from -40°C to 125°C. That makes it appropriate for automotive signal-processing environments subject to final system qualification. According to the manufacturer product information, its key characteristics include two channels, a 36 V supply rating, and a 1.2 MHz gain-bandwidth product. Individual vehicle platforms may impose additional qualification, traceability, EMC, and component-change requirements beyond the device grade.
Where to buy LM2904BQDRQ1 online?
Use the Request a Quote form on this page to request LM2904BQDRQ1 pricing, availability, lead time, and suitable shipment quantities. The part is an automotive-grade, dual 36 V operational amplifier in an 8-pin SOIC package. Quote requests allow the current channel, package, and order quantity to be checked together, which is especially useful when the design requires a specific automotive-qualified ordering suffix or production scheduling support.
What is the price of LM2904BQDRQ1?
The current price for LM2904BQDRQ1 should be obtained through the Request a Quote form on this page so that quantity, shipment method, and market conditions are handled together. The device is a Texas Instruments automotive-grade dual operational amplifier with a 36 V supply rating, 1.2 MHz gain-bandwidth product, and 8-pin SOIC package. The form is the appropriate route for a current commercial quotation rather than a static price that can quickly become outdated.
What is the lead time for LM2904BQDRQ1?
The current lead time for LM2904BQDRQ1 should be confirmed through the Request a Quote form on this page. Lead time can depend on order quantity, production schedule, and shipment destination, so it should not be inferred from general distributor inventory messages. Include the required quantity, standard commercial versus automotive qualification requirements, and target delivery date in the request to obtain an actionable schedule.
Is LM2904BQDRQ1 in stock?
Current LM2904BQDRQ1 stock should be confirmed through the Request a Quote form on this page. The form can validate availability for the exact automotive-qualified ordering suffix and requested quantity, which is more reliable than treating a generic family listing as confirmation of every package option. The manufacturer identifies the device as an automotive-grade dual operational amplifier with a 36 V supply rating and a 1.2 MHz gain-bandwidth product.
What can replace LM2904BQDRQ1?
The closest documented same-family replacement candidates are the Texas Instruments LM2904B-Q1 ordering variants listed on this page, but every proposed replacement must be checked for the exact package, qualification grade, electrical limits, and lifecycle status. According to the Texas Instruments LM2904B-Q1 documentation, the defining family ratings include two channels, a 36 V supply rating, 1.2 MHz gain-bandwidth, and -40°C to 125°C operation. No unqualified cross-brand drop-in claim is made without verifying the candidate manufacturer’s own datasheet.
Is LM2904BQDRQ1 the same as LM2904B-Q1?
LM2904BQDRQ1 is the complete ordering part number for a specific member of the Texas Instruments LM2904B-Q1 family. The family description identifies an automotive-grade, dual, 36 V, 1.2 MHz operational amplifier with -40°C to 125°C operation. They are therefore related identifiers rather than unrelated devices, but engineers should use the full ordering suffix when checking package, qualification, and ordering information.
When should I choose LM2904BQDRQ1 over LM2904BIPAR?
Choose LM2904BQDRQ1 when the design specifically needs the Texas Instruments automotive-qualified ordering option in an 8-pin SOIC package. The LM2904BIPAR is also associated with the LM2904B family, but package code and ordering context must be compared before substitution. According to the manufacturer LM2904B-Q1 information, the family provides two channels, a 36 V supply rating, a 1.2 MHz gain-bandwidth product, and operation from -40°C to 125°C.
Is LM2904BQDRQ1 suitable for sensor signal conditioning?
The LM2904BQDRQ1 is suitable for many sensor signal-conditioning uses because it provides two general-purpose amplifier channels, a 36 V supply rating, and a 1.2 MHz gain-bandwidth product. According to the Texas Instruments LM2904B-Q1 documentation, the automotive-grade device operates from -40°C to 125°C. The actual sensor interface must still verify input common-mode range, offset, output swing, noise, source impedance, and filtering requirements against the sensor and excitation circuitry.
What is the best equivalent for LM2904BQDRQ1?
No cross-brand equivalent is presented as a guaranteed drop-in replacement because the available cross-reference material does not establish a complete, manufacturer-specific pin and parameter comparison for a qualified candidate. The documented candidates on this page are same-brand LM2904B-Q1 ordering variants. According to the Texas Instruments product information, the target has two channels, a 36 V supply rating, a 1.2 MHz gain-bandwidth product, and -40°C to 125°C operation; any broader substitution requires datasheet verification.
LM2904BQDRQ1 vs LM2904BIDR: which is better for automotive designs?
LM2904BQDRQ1 is the better choice when the exact automotive-qualified Texas Instruments ordering option is required, while LM2904BIDR belongs to the related LM2904B family and must be checked for its individual qualification and package details. According to the LM2904B-Q1 product information, the family ratings include two channels, a 36 V supply rating, 1.2 MHz gain-bandwidth, and -40°C to 125°C operation. The deciding factor is the exact ordering table and qualification required by the vehicle platform.

工程參考資料,適用於 LM2904BQDRQ1 — 比較、設計指引及合規資訊。

選型指南

Choose LM2904BQDRQ1 when the design needs a Texas Instruments automotive-grade, dual operational amplifier in an 8-pin SOIC package, particularly for a 36 V-capable system operating from -40°C to 125°C. Its two channels can support independent gain, buffer, filtering, or feedback functions, while the 1.2 MHz gain-bandwidth product is suitable for many low- and moderate-frequency signal paths. LM2904BIPAR, LM2904BIDR, and LM2904BDR are close same-family alternatives when their individual qualification and ordering conditions match the design. Do not substitute solely from the package name: verify input offset, common-mode range, output swing, slew rate, noise, load stability, and exact pin arrangement. A different amplifier family may be preferable when the application requires rail-to-rail inputs, very low offset, faster settling, lower noise, or a smaller package. For production automotive designs, also confirm the exact suffix, traceability, qualification status, and manufacturer change-control documentation before releasing the schematic and BOM.

與替代品比較

參數 本產品 LM2904BIPAR LM2904BIDR LM2904BDR
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 8-SOIC 8-SOIC 8-SOIC 8-SOIC
Number of Channels 2 channels 2 channels 2 channels 2 channels
Maximum Supply Voltage 36 V 36 V 36 V 36 V
Gain-Bandwidth Product 1.2 MHz 1.2 MHz 1.2 MHz 1.2 MHz
Operating Temperature Range -40°C to 125°C -40°C to 125°C -40°C to 125°C -40°C to 125°C

主要差異化特點

  • Automotive-qualified ordering option with extended temperature operation (對比LM2904BDR)
  • Two general-purpose channels in a compact 8-pin SOIC (對比LM2904BIDR)
  • Wide 36 V supply capability for higher-voltage analog systems (對比LM2904BIPAR)

設計說明

Verify input common-mode voltage, output swing, and output-current requirements at the minimum and maximum system supply conditions. A 36 V maximum supply rating is a stress ceiling, not permission to operate every input and output at every rail voltage. For non-inverting biasing, calculate the closed-loop operating point before selecting resistor values; for inverting configurations, confirm that the input common-mode range remains valid throughout signal and tolerance extremes.

Place the power-supply bypass capacitor close to the device supply pin and return it directly to the ground plane. Keep the amplifier input and feedback traces short, and avoid routing them adjacent to switching nodes or high-current return paths. Because the two channels share the package and supply pins, their decoupling requirements are not independent: one effective bypass network must support both channels, particularly when one channel drives a higher capacitive load than the other.

Check closed-loop stability against the source impedance and load capacitance. A high-value feedback resistor can combine with input capacitance to alter phase margin, while a large capacitive load can cause ringing or oscillation. The 1.2 MHz gain-bandwidth product provides the basis for stability and bandwidth analysis, but the external network must be evaluated at every intended gain setting rather than assuming the amplifier is stable with every resistive and capacitive combination.

Estimated: amplifier dissipation depends on the actual supply, quiescent current, output swing, load, and duty cycle. Calculate P = VIN × IQ plus the output-current contribution and compare the resulting junction-temperature estimate with the device limit. Use the widest copper area practical for the 8-pin SOIC layout, maintain unobstructed thermal paths, and avoid locating the device next to a high-temperature source. No numerical thermal rating is asserted without the manufacturer junction-temperature and package data.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

Texas Instruments identifies the LM2904B-Q1 as automotive grade, but no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement is present in the referenced product information.

相關搜尋

LM2904BQDRQ1 datasheet LM2904BQDRQ1 pinout LM2904BQDRQ1 datasheet pdf LM2904BQDRQ1 specifications LM2904BQDRQ1 equivalent LM2904BQDRQ1 replacement LM2904BQDRQ1 cross reference LM2904BQDRQ1 footprint LM2904BQDRQ1 price LM2904BQDRQ1 stock Texas Instruments LM2904BQDRQ1 LM2904BQDRQ1 8-SOIC LM2904BQDRQ1 automotive op amp LM2904BQDRQ1 vs LM2904BIDR

相關元件與詞彙

Texas Instruments LM2904BQDRQ1 LM2904B-Q1 LM2904BIPAR LM2904BIDR LM2904BDR dual operational amplifier operational amplifier analog signal conditioning voltage-feedback amplifier semiconductor 8-pin SOIC SOIC package family surface-mount package 1.2 MHz gain-bandwidth product 36 V supply -40°C to 125°C automotive grade AEC-Q100 common-mode voltage output swing slew rate active filter sensor interface
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情