Texas Instruments

LM358DGKR - Dual 36V Operational Amplifier | Texas Instruments

MPN: LM358DGKR ✓ Aktif
36 V Vdss 30 mA; operating-condition qualification not stated Id 8-pin VSSOP Package
MOQ: 1 |

LM358DGKR Ringkasan

Texas Instruments LM358DGKR is a dual general-purpose operational amplifier with two amplifier channels, a 36 V maximum supply rating, a typical input offset voltage of 300 µV, and an 8-pin VSSOP package. It is designed for cost-sensitive analog signal conditioning across industrial, instrumentation, communications, and embedded-control systems.

An operational amplifier, commonly called an op amp, is a high-gain differential amplifier whose open-loop behavior is shaped by external feedback networks. The LM358 belongs to the broader operational-amplifier hierarchy, within analog ICs and signal-chain conditioning. Its two independent channels allow one package to implement functions such as amplification, buffering, voltage comparison, difference amplification, and basic active filtering.

Key features include two amplifier circuits in one package, a supply capability reaching 36 V, input offset voltage of 300 µV typical, a common-mode input range that extends to ground, and high differential-input-voltage capability. These characteristics suit systems whose signal levels vary widely and whose analog section operates from a single positive supply. The device also provides a practical choice for cost-sensitive designs because two channels reduce component count and board area.

The LM358 architecture is intended for general-purpose rather than precision applications. Its typical 300 µV offset is useful for moderate-accuracy signal conditioning but requires careful bias-current compensation when the source impedance is high. Ground-referenced inputs are supported, which helps simplify single-supply interfaces. Designers should still evaluate output swing, input common-mode limits, supply headroom, capacitive-load stability, and channel-to-channel behavior at the selected voltage and temperature.

Typical uses include sensor-amplifier interfaces, transducer signal conditioning, low-side current measurement, audio preamplification, comparator stages, industrial control loops, and general buffering. In instrumentation designs, the two channels can process complementary or sequential signals. The 8-pin VSSOP outline supports compact layouts, although careful input routing and stable feedback connections remain important in noisy systems.

A key design consideration is to place input, feedback, and decoupling components close to their associated pins. Bypass the supply with a short, low-inductance connection, avoid long high-impedance input traces, and verify stability when driving capacitive loads. The common-mode input range and output swing must both be checked at the minimum and maximum operating supply.

This page combines manufacturer specifications, package guidance, commercially sourced alternatives, and practical design guidance for engineers evaluating the LM358DGKR as a dual, general-purpose, high-voltage operational amplifier.

Alternatif penggantian untuk LM358DGKR — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian LM358DGKR (sama faktor bentuk dan footprint) — berbeda di dalam Package, Maximum Supply Voltage, Common-Mode Input Range, Input Offset Voltage, Operating Temperature Range.

Texas Instruments
Package: 8-pin VSSOP (DGK)
Maximum Supply Voltage: 30 V
Common-Mode Input Range: Can extend to ground
Bandingkan dengan LM358DGKR →
Texas Instruments
Maximum Supply Voltage: 30 V
Input Offset Voltage: 3 mV
Operating Temperature Range: 0 °C to +70 °C
Bandingkan dengan LM358DGKR →
Texas Instruments
Package: 8-VSSOP
Bandingkan dengan LM358DGKR →

LM358ADGKR

✅ Drop-In
Texas Instruments
📦 8-pin VSSOP
Dual general-purpose operational amplifier · 2 channels · 30 V · 700 kHz · 3 mV · 0 °C to +70 °C · VSSOP (DGK) · 8 pins

Kontak untuk harga

Lihat Datasheet →

LM358DGKR

✅ Drop-In
Texas Instruments
📦 8-pin TSSOP
2 channels · 36 V · 300 µV typical · Extends to ground · High; exact limit not stated · 8-pin VSSOP · Standard general-purpose dual operational amplifier · Surface mount

Kontak untuk harga

Lihat Datasheet →

LM358DGKR Rating Maksimal & Karakteristik Listrik

Number of Amplifier Channels 2 channels
Maximum Supply Voltage 36 V
Input Offset Voltage 300 µV typical
Common-Mode Input Range Extends to ground
Differential Input Voltage Capability High; exact limit not stated
Paket 8-pin VSSOP
Device Type Standard general-purpose dual operational amplifier
Tipe Mounting Surface mount
Output Current 30 mA; operating-condition qualification not stated

LM358DGKR 8-pin vssop Diamant Konfigurasi Panduan

Konfigurasi pin untuk LM358DGKR (8-pin vssop pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.

Diamant diagram pakai pakai 8-pin vssop untuk LM358DGKR

Tidak ada data diatribut pin yang tersedia untuk LM358DGKR.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

LM358DGKR cocok untuk 6 aplikasis: Industrial Sensor Signal Conditioning, Low-Side Current Measurement, Audio Preamplification, Threshold Detection and Control, Communications Interface Buffering, Embedded Control Signal Conditioning.

🏭

Industrial Sensor Signal Conditioning

The LM358DGKR is well suited to conditioning low-level sensor signals because its common-mode input range extends to ground and its typical input offset voltage is 300 µV. Two amplifier channels can handle related inputs or implement a gain stage and an output buffer on the same board. With a 36 V maximum supply rating, the device can support higher-voltage industrial interfaces. Verify the input and output headroom at the actual supply voltage, compensate input bias current when the source resistance is high, and keep sensitive feedback nodes compact.

⚡

Low-Side Current Measurement

The LM358DGKR can amplify the small voltage produced across a low-side current-sense resistor while providing a common ground reference. Its dual-channel arrangement permits one channel to amplify the sense voltage and the other to buffer or support another stage in the measurement chain. The 300 µV typical offset becomes important when the measured voltage approaches that scale, so use suitable resistor values, account for input bias current, and confirm that output swing remains above the required measurement range.

🎧

Audio Preamplification

The LM358DGKR can serve as a general-purpose preamplifier for audio sources operating from a single positive supply. Its common-mode input range extending to ground supports coupling into the input stage, while the 36 V maximum rating provides flexibility for higher-voltage circuit arrangements. The device should be selected only after checking input bias current, output swing, gain-bandwidth behavior, and distortion expectations. A practical layout keeps the input path short and places the input bypass capacitor near the corresponding amplifier pin.

🧩

Threshold Detection and Control

The LM358DGKR can implement a comparator-style threshold detector with feedback or an open-loop decision stage when the required operating point is compatible with its input and output limits. The common-mode range extending to ground makes the device useful in grounded sensor systems, while the dual configuration allows two thresholds or a control signal plus a buffered reference. Check the minimum output levels, supply tolerances, and propagation behavior against the control-system timing requirements before using it as a precision comparator.

🌐

Communications Interface Buffering

The LM358DGKR can buffer or amplify intermediate communications signals where the design requires a grounded common-mode reference and a supply rating above typical low-voltage logic levels. Its two channels support independent receive-side or monitor functions on a compact board. For higher-speed communications nodes, verify bandwidth, slew rate, output swing, and capacitive-load stability because the LM358 is a general-purpose amplifier rather than a dedicated high-speed line driver. Use short traces and stable reference planes to minimize noise pickup.

🔧

Embedded Control Signal Conditioning

The LM358DGKR is appropriate for conditioning analog feedback signals in embedded-control and monitoring systems where two channels, ground-referenced inputs, and a 36 V maximum supply rating are useful. It can amplify a sensor feed and buffer an actuator-control signal, reducing the number of packages required. Design around the exact supply range, output-swing limits, input bias current, and channel behavior at the selected operating temperature. Decoupling and feedback stability are particularly important when the analog section shares a board with switching circuitry.

What are the key specifications of LM358DGKR that engineers should know?
The LM358DGKR is a dual general-purpose operational amplifier with two amplifier circuits, a maximum supply rating of 36 V, typical input offset voltage of 300 µV, and an 8-pin VSSOP package. According to the Texas Instruments LM358 product page, the device also provides a common-mode input range extending to ground and high differential-input-voltage capability. These characteristics make it suitable for general-purpose signal conditioning, buffering, comparator, and gain-stage applications rather than precision instrumentation.
Where can I download the LM358DGKR datasheet PDF?
The LM358DGKR technical documentation is available from the Texas Instruments product page for the LM358 family. That page provides the manufacturer’s datasheet and part information for the LM358DGKR orderable device. Use the pin-description table, electrical-characteristics table, and recommended operating conditions from the manufacturer datasheet when assigning PCB functions and designing the analog stage.
Where can I find the LM358DGKR pinout?
Use the manufacturer’s LM358 datasheet to locate the LM358DGKR pin configuration and the 8-pin VSSOP drawing. The two amplifier sections each require input, output, and supply connections, and the package pin functions must be assigned exactly as shown in the datasheet. The verified part description identifies an 8-pin VSSOP package, but a complete numbered pin list is not published on the manufacturer product page used for this record.
What is the supply voltage range of LM358DGKR?
The LM358DGKR supports high-voltage operation up to 36 V, as stated on the Texas Instruments LM358 product page. The exact minimum and maximum recommended supply limits and their associated performance conditions must be taken from the manufacturer datasheet before design release. Because this is a general-purpose dual amplifier, the selected supply voltage also affects output swing, input common-mode range, and usable signal headroom.
Is LM358DGKR suitable for single-supply sensor conditioning?
The LM358DGKR is suitable for many single-supply sensor-conditioning designs because its common-mode input range extends to ground. The 300 µV typical offset and dual-channel configuration support moderate-accuracy amplification and buffering. For sensors with small outputs, calculate the required gain, verify the output swing at the intended load, and add bias compensation when source impedance is high. The 36 V supply rating also allows use in higher-voltage industrial interfaces.
What can replace LM358DGKR without changing the PCB?
A true PCB-compatible replacement must use the same 8-pin VSSOP footprint, follow the same pin functions, and preserve the required supply-voltage and signal-performance envelope. The LM358DGKR cross-reference results identify LM358-family candidates, but several listed parts use different packages or are general equivalents rather than verified drop-ins. Confirm the exact suffix, package drawing, pin map, and electrical limits in the replacement manufacturer’s documentation before approving a substitution.
Is LM358DGKR the same as LM358ADGKR?
LM358DGKR and LM358ADGKR are distinct LM358-family orderable parts whose suffix identifies different device and packaging options. They are related variants, but they should not be treated as electrically identical without checking the comparison data and manufacturer ordering information. The documented comparison identifies differences in series and other attributes, so verify package, temperature grade, electrical characteristics, and pin compatibility for the specific production design.
When should I choose LM358DGKR instead of another dual op amp?
Choose LM358DGKR when the design needs two general-purpose amplifier channels, operation with a supply rating up to 36 V, a common-mode input range extending to ground, and a compact 8-pin VSSOP package. It is particularly suitable for cost-sensitive industrial signal conditioning. Select a precision or rail-to-rail amplifier instead when offset, bias current, common-mode headroom, output swing, or noise requirements exceed the LM358’s general-purpose performance envelope.
What is the best ROHM Semiconductor equivalent for LM358DGKR?
ROHM Semiconductor also lists an LM358DGKR, described as a dual general-purpose operational amplifier in an 8-pin TSSOP package, making it the closest cross-brand candidate identified for this MPN. According to the ROHM Semiconductor LM358DGKR listing, the device supports a dual general-purpose amplifier arrangement with a ±16 V or 32 V operating indication. Confirm package drawings, pin functions, electrical limits, and qualification requirements before using it as a production replacement.
Where can I request a quote for LM358DGKR?
Use the Request a Quote form on this page to request current LM358DGKR pricing, stock, minimum order quantity, and lead time. The request should include the Texas Instruments manufacturer name, exact LM358DGKR suffix, required quantity, and destination country. Because availability and commercial terms can change, obtain a current quotation before scheduling production or approving a bill of materials.
How much does LM358DGKR cost?
Use the Request a Quote form on this page for current LM358DGKR pricing and quantity terms. Pricing depends on order quantity, inventory, and sourcing conditions, and the quote form provides the appropriate current commercial response for this exact Texas Instruments part number. Confirm the requested quantity and target delivery date when submitting the request so the quote reflects the intended production commitment.
What is the lead time and stock status for LM358DGKR?
Request current stock, minimum order quantity, and lead time through the Request a Quote form on this page. LM358DGKR is identified as an active Texas Instruments LM358-family device, but live inventory and scheduling remain commercial variables that can change by date and quantity. Include your required quantity, approved supplier status, and delivery target when requesting the quotation.
What are the differences between LM358DGKR and LM358DGKRG4?
LM358DGKR and LM358DGKRG4 are closely related Texas Instruments orderable variants, but their orderable suffixes must be interpreted separately when procurement and PCB assembly are concerned. The published comparison covers attributes such as series, RoHS status, REACH status, and mounting style. Confirm the exact reel or packing code, labeling, traceability, and manufacturing configuration before substituting one orderable number for the other.
Does LM358DGKR need decoupling capacitors?
Yes, the LM358DGKR supply rails should be bypassed close to the device pins to control impedance and limit supply noise. Place the capacitor and the amplifier on the same side of the PCB, keep the loop area small, and route the ground return without crossings. Because the device contains two amplifiers, check whether channel interaction changes with shared supply decoupling and avoid long shared power branches.
Is LM358DGKR suitable for automotive or industrial applications?
The LM358DGKR is a general-purpose high-voltage amplifier suitable for many industrial designs, but automotive use requires an explicitly qualified part and application review. The manufacturer describes the LM358 family as cost-sensitive and highlights its 36 V rating, low offset, ground-referenced common-mode input range, and high differential-input-voltage capability. Do not infer AEC-Q100 qualification from the family description; confirm the exact device qualification status and operating temperature limits.

Data referensi engineering untuk LM358DGKR — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the LM358DGKR for cost-sensitive general-purpose analog designs that require two channels, ground-referenced common-mode inputs, and operation with a supply rating up to 36 V. Its 300 µV typical offset is suitable for moderate-accuracy conditioning rather than precision measurement. Consider the Texas Instruments LM358ADGKR only after confirming the LM358A-series electrical differences and exact package details. The ROHM Semiconductor LM358DGKR is a close cross-brand candidate in an 8-pin TSSOP, but its manufacturer documentation should be checked for pin compatibility, supply limits, offset behavior, and lifecycle requirements. For applications requiring rail-to-rail input or output, very low offset, low bias current, or high bandwidth, choose a modern precision or rail-to-rail amplifier instead of assuming LM358-family interchangeability.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini LM358ADGKR LM358DGKR
Brand Texas Instruments Texas Instruments ROHM Semiconductor
Package 8-pin VSSOP 8-pin VSSOP 8-pin TSSOP
Device Type Standard general-purpose operational amplifier LM358A-series general-purpose amplifier Dual general-purpose operational amplifier
Series LM358 LM358A LM358
Mounting Style Surface mount Surface mount Surface mount

Diferensiator Kunci

  • High-voltage general-purpose dual-amplifier option (vsLM358DGKR)
  • Common-mode input operation extends to ground (vsLM358DGKR)
  • Two general-purpose channels in one compact package (vsLM358ADGKR)

Catatan Desain

Place the supply bypass capacitor directly between the supply and ground pins, with the ground connection following the shortest practical path. Keep both feedback networks and high-impedance input traces away from switching nodes and inductor fields. Because two amplifiers share the package, route each channel according to its signal sensitivity rather than treating both channels as electrically or spatially identical.

The LM358 input-offset target of 300 µV typical makes source impedance and bias-current compensation important in high-gain stages. Use equal-value compensation resistors at the inputs when required by the manufacturer guidance, and avoid leakage from adjacent board surfaces. Also verify that the intended signal remains inside the common-mode range and that the calculated gain does not create a gain-bandwidth or stability problem.

Do not treat the 36 V maximum rating as a design target or assume the output can swing rail to rail. Check output current, output swing, common-mode limits, and operating-temperature limits at the selected supply. The 30 mA output-current figure also requires operating-condition qualification before it is used for load calculations.

Use separate local decoupling for each power pin when the package provides multiple supply connections. Keep the capacitor and amplifier on the same PCB side and minimize loop inductance, especially when the op amp follows a switching regulator. If the LM358 shares a rail with a converter, allow the converter to settle before enabling the sensitive analog section when the system architecture permits.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

Compliance status is not stated in the manufacturer product information used for this record. Verify RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations for the exact orderable MPN.

Pencarian Terkait

LM358DGKR datasheet LM358DGKR pinout LM358DGKR datasheet pdf LM358DGKR equivalent LM358DGKR replacement LM358DGKR cross reference LM358DGKR vs LM358ADGKR LM358DGKR price LM358DGKR stock Texas Instruments LM358DGKR LM358DGKR 8-VSSOP amplifier LM358DGKR single supply application LM358DGKR sensor signal conditioning what is the LM358DGKR supply voltage

Komponen dan Istilah Terkait

Texas Instruments LM358DGKR LM358ADGKR ROHM Semiconductor operational amplifier op amp dual amplifier analog IC signal conditioning common-mode input range input offset voltage 300 µV 36 V 8-pin VSSOP 8-pin TSSOP surface-mount package single-supply operation industrial control sensor interface audio preamplifier RoHS REACH AEC-Q100 Texas Instruments LM358 ROHM LM358
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ