LPC4088FBD144 - ARM Cortex-M4 MCU 120MHz 512KB | NXP LPC4088FBD144 oleh NXP Semiconductors - komponen elektronik
NXP Semiconductors

LPC4088FBD144 - ARM Cortex-M4 MCU 120MHz 512KB | NXP

MPN: LPC4088FBD144 ✓ Aktif
3.0 V to 3.6 V Vdss 144-pin LQFP (20x20 mm, 0.5 mm pitch) Package 120 MHz Speed 512 KB Memory
Ajukan Diskon
MOQ: 1 |
Lihat Datasheet (PDF) Lihat Alternatif

LPC4088FBD144 Ringkasan

The NXP Semiconductors LPC4088FBD144 is an ARM Cortex-M4F digital signal controller running at 120 MHz, integrating 512 KB of on-chip flash and 96 KB SRAM in a 144-pin LQFP (20x20 mm) package. According to the NXP product page, the device targets embedded applications requiring a high level of integration and low power dissipation, including those needing USB, Ethernet, an LCD interface, EMC, and SPIFI for external memory expansion.

An ARM Cortex-M4 microcontroller is a 32-bit RISC processor core designed for deterministic embedded control, featuring a single-precision floating-point unit, DSP extensions via SIMD instructions, a Nested Vectored Interrupt Controller, and tightly-coupled memory for low-latency code execution. Within the broader taxonomy, the LPC4088 belongs to the Cortex-M4 family -> ARM Cortex-M -> 32-bit MCU -> microcontroller -> embedded processor -> semiconductor. The M4F variant specifically adds hardware floating-point math, distinguishing it from the M0/M0+/M3 families that lack FPU support.

Key features of the LPC4088FBD144 include a 120 MHz maximum CPU clock, 512 KB flash program memory, 96 KB SRAM, an 8-channel GPDMA controller, USB 2.0 full-speed and high-speed OTG with on-chip PHY, 10/100 Ethernet MAC, an LCD controller supporting STN and TFT panels up to 1024x768, two CAN 2.0B controllers, four UARTs, three SSP/SPI peripherals, an I2C bus interface, a 10-bit ADC with 8 channels, a 10-bit DAC, PWM/timer subsystems, an EMC external memory controller, and a SPIFI quad-SPI flash interface. The 144-pin LQFP provides 5 V-tolerant GPIO and a wide operating temperature range suitable for industrial environments.

Architecturally, the LPC4088 integrates the Cortex-M4 core with NXP's peripheral subsystem, offering deterministic interrupt latency under 12 cycles and a low-power sleep mode that retains SRAM while dropping core clocks. The high-speed USB, Ethernet, and LCD controller are enabled simultaneously, supported by a multi-layer AHB bus matrix that prevents peripheral contention.

Typical applications include industrial control with HMI touchscreens, building automation gateways, point-of-sale terminals, USB audio devices, embedded data loggers, and motor control with CAN. The 512 KB flash and 96 KB SRAM comfortably support a real-time OS such as FreeRTOS with USB and TCP/IP stacks.

When designing with the LPC4088, ensure the SPIFI pins are not remapped when external Quad-SPI flash is in use, and provision decoupling capacitors within 5 mm of each VDD/VSS pair. JTAG/SWD traces should be length-matched to within 25 mm to preserve debug clock integrity.

This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on a single distributor listing, helping engineers compare the LPC4088 against same-package NXP variants and cross-brand Cortex-M4 replacements.

Alternatif penggantian untuk LPC4088FBD144 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian LPC4088FBD144 (sama faktor bentuk dan footprint) — berbeda di dalam ADC, Ethernet, LCD Controller, Package, USB.

NXP Semiconductors
ADC: 12-bit
Ethernet: 10/100 MAC (MII/RMII)
LCD Controller: Yes (up to 1024x768 TFT)
Bandingkan dengan LPC4088FBD144 →

LPC4088FBD144,551

✅ Drop-In
📦 LQFP-144 (20x20 mm)
identical die, tape-and-reel packaging variant per NXP ordering code 551

📋 Alternatif referensi (tidak dalam katalog)

LPC4078FBD144

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 LQFP-144 (20x20 mm)
same LQFP-144 footprint, 512 KB flash, optimized LCD controller, same Cortex-M4F core at 120 MHz

📋 Alternatif referensi (tidak dalam katalog)

LPC4088FET180

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 LQFP-180
same die, larger LQFP-180 footprint exposes additional GPIO and bus pins; NOT pin-compatible with LQFP-144

📋 Alternatif referensi (tidak dalam katalog)

LPC4076FBD144

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 LQFP-144 (20x20 mm)
same LQFP-144 footprint, 256 KB flash vs 512 KB (-50%), same Cortex-M4F 120 MHz core

📋 Alternatif referensi (tidak dalam katalog)

LPC4088FBD208

✅ Drop-In
📦 LQFP-208
same die, larger LQFP-208 footprint; requires PCB redesign, not a true drop-in for LQFP-144

📋 Alternatif referensi (tidak dalam katalog)

LPC4088FBD144 Rating Maksimal & Karakteristik Listrik

Core Architecture ARM Cortex-M4F (32-bit)
Maximum Clock Speed 120 MHz
Program Flash Memory 512 KB
SRAM 96 KB
Paket 144-pin LQFP (20x20 mm, 0.5 mm pitch)
Operating Voltage (IO) 3.0 V to 3.6 V
Suhu Kerja -40 C to +85 C
USB USB 2.0 High-Speed OTG with on-chip PHY
Ethernet 10/100 MAC (requires external PHY)
LCD Controller Yes, up to 1024 x 768
SPIFI Quad-SPI flash interface
EMC (External Memory Controller) Yes
GPIO 5 V-tolerant
ADC 10-bit, 8 channels
DAC 10-bit
CAN 2 x CAN 2.0B
Tipe Mounting Surface Mount
Status RoHS Compliant

Konfigurasi Pin LPC4088FBD144

LQFP-144 Package Pinout Diagram LQFP-144 20x20mm, P0.5mm, JEDEC MS-026. 1 36 LQFP-144
Pin produk 1 P1[29] — General-purpose IO / USB1 UP_LED
Pin produk 2 P1[30] — General-purpose IO / USB1 VBUS
Pin produk 3 P1[31] — General-purpose IO / USB1 INT
Pin produk 4 P2[0] — General-purpose IO / PWM1[1]
Pin produk 5 P2[1] — General-purpose IO / PWM1[2]
Pin produk 6 P2[2] — General-purpose IO / PWM1[3]
Pin produk 7 P2[3] — General-purpose IO / PWM1[4]
Pin produk 8 P2[4] — General-purpose IO / PWM1[5]
Pin produk 9 P2[5] — General-purpose IO / PWM1[6]
Pin produk 10 P2[6] — General-purpose IO
Pin produk 11 VSS — Ground
Pin produk 12 VDD(REG)(3V3) — 3.3 V regulator output
Pin produk 13 VSS — Ground
Pin produk 14 P0[0] — CAN RD1 / General-purpose IO
Pin produk 15 P0[1] — CAN TD1 / General-purpose IO
Pin produk 16 P0[2] — UART0 TXD0 / General-purpose IO
Pin produk 17 P0[3] — UART0 RXD0 / General-purpose IO
Pin produk 18 P0[4] — I2C0 SDA / General-purpose IO
Pin produk 19 P0[5] — I2C0 SCL / General-purpose IO
Pin produk 20 P0[6] — SSP0 SCK / General-purpose IO
Pin produk 21 P0[7] — SSP0 SSEL / General-purpose IO
Pin produk 22 P0[8] — SSP0 MISO / General-purpose IO
Pin produk 23 P0[9] — SSP0 MOSI / General-purpose IO
Pin produk 24 P0[10] — UART2 TXD / General-purpose IO
Pin produk 25 P0[11] — UART2 RXD / General-purpose IO
Pin produk 26 P0[12] — USB0 UP_LED / General-purpose IO
Pin produk 27 P0[13] — USB0 VBUS / General-purpose IO
Pin produk 28 P0[14] — USB0 CONNECT / General-purpose IO
Pin produk 29 P0[15] — USB0 VBUS / General-purpose IO
Pin produk 30 VSS — Ground
Pin produk 31 VDD(IO) — IO supply voltage (3.0-3.6 V)
Pin produk 32 P1[0] — ENET TXD0 / General-purpose IO
Pin produk 33 P1[1] — ENET TXD1 / General-purpose IO
Pin produk 34 P1[2] — ENET TX_EN / General-purpose IO
Pin produk 35 P1[3] — ENET TX_CLK / General-purpose IO
Pin produk 36 P1[4] — ENET RXD0 / General-purpose IO
Pin produk 37 P1[5] — ENET RXD1 / General-purpose IO
Pin produk 38 P1[6] — ENET RX_ER / General-purpose IO
Pin produk 39 P1[7] — ENET RX_CLK / General-purpose IO
Pin produk 40 P1[8] — ENET CRS / General-purpose IO
Pin produk 41 P1[9] — ENET MDC / General-purpose IO
Pin produk 42 P1[10] — ENET MDIO / General-purpose IO
Pin produk 43 P1[11] — General-purpose IO
Pin produk 44 P1[12] — General-purpose IO
Pin produk 45 P1[13] — General-purpose IO
Pin produk 46 P1[14] — General-purpose IO
Pin produk 47 P1[15] — General-purpose IO
Pin produk 48 VSS — Ground
Pin produk 49 VDD(IO) — IO supply voltage (3.0-3.6 V)
Pin produk 50 P1[16] — General-purpose IO
Pin produk 51 P1[17] — General-purpose IO
Pin produk 52 P1[18] — General-purpose IO / UART1 CTS
Pin produk 53 P1[19] — General-purpose IO / UART1 RTS
Pin produk 54 P1[20] — General-purpose IO / UART1 RXD
Pin produk 55 P1[21] — General-purpose IO / UART1 TXD
Pin produk 56 P1[22] — General-purpose IO
Pin produk 57 P1[23] — General-purpose IO
Pin produk 58 P1[24] — General-purpose IO
Pin produk 59 P1[25] — General-purpose IO
Pin produk 60 P1[26] — General-purpose IO
Pin produk 61 P1[27] — General-purpose IO / USB1 VBUS
Pin produk 62 P1[28] — General-purpose IO / USB1 UP_LED
Pin produk 63 VSS — Ground
Pin produk 64 VDD(IO) — IO supply voltage (3.0-3.6 V)
Pin produk 65 P2[7] — General-purpose IO
Pin produk 66 P2[8] — General-purpose IO / LCD VD[0]
Pin produk 67 P2[9] — General-purpose IO / LCD VD[1]
Pin produk 68 P2[10] — General-purpose IO / LCD VD[2]
Pin produk 69 P2[11] — General-purpose IO / LCD VD[3]
Pin produk 70 P2[12] — General-purpose IO / LCD VD[4]
Pin produk 71 P2[13] — General-purpose IO / LCD VD[5]
Pin produk 72 P2[14] — General-purpose IO / LCD VD[6]
Pin produk 73 P2[15] — General-purpose IO / LCD VD[7]
Pin produk 74 P3[0] — General-purpose IO / LCD VD[8]
Pin produk 75 P3[1] — General-purpose IO / LCD VD[9]
Pin produk 76 P3[2] — General-purpose IO / LCD VD[10]
Pin produk 77 P3[3] — General-purpose IO / LCD VD[11]
Pin produk 78 P3[4] — General-purpose IO / LCD VD[12]
Pin produk 79 P3[5] — General-purpose IO / LCD VD[13]
Pin produk 80 P3[6] — General-purpose IO / LCD VD[14]
Pin produk 81 P3[7] — General-purpose IO / LCD VD[15]
Pin produk 82 VSS — Ground
Pin produk 83 VDD(IO) — IO supply voltage (3.0-3.6 V)
Pin produk 84 P3[8] — General-purpose IO / LCD VD[16]
Pin produk 85 P3[9] — General-purpose IO / LCD VD[17]
Pin produk 86 P3[10] — General-purpose IO / LCD VD[18]
Pin produk 87 P3[11] — General-purpose IO / LCD VD[19]
Pin produk 88 P3[12] — General-purpose IO / LCD VD[20]
Pin produk 89 P3[13] — General-purpose IO / LCD VD[21]
Pin produk 90 P3[14] — General-purpose IO / LCD VD[22]
Pin produk 91 P3[15] — General-purpose IO / LCD VD[23]
Pin produk 92 P4[0] — General-purpose IO / LCD VCLK
Pin produk 93 P4[1] — General-purpose IO / LCD LP
Pin produk 94 P4[2] — General-purpose IO / LCD FP
Pin produk 95 P4[3] — General-purpose IO / LCD ENAB
Pin produk 96 P4[4] — General-purpose IO / LCD DCLK
Pin produk 97 P4[5] — General-purpose IO / LCD LE
Pin produk 98 P4[6] — General-purpose IO / LCD PWR
Pin produk 99 P4[7] — General-purpose IO
Pin produk 100 P4[8] — General-purpose IO / EMC CAS
Pin produk 101 P4[9] — General-purpose IO / EMC RAS
Pin produk 102 P4[10] — General-purpose IO / EMC CLK
Pin produk 103 P4[11] — General-purpose IO / EMC CKE
Pin produk 104 P4[12] — General-purpose IO / EMC DQMOUT[0]
Pin produk 105 P4[13] — General-purpose IO / EMC DQMOUT[1]
Pin produk 106 P4[14] — General-purpose IO / EMC DQMOUT[2]
Pin produk 107 P4[15] — General-purpose IO / EMC DQMOUT[3]
Pin produk 108 VSS — Ground
Pin produk 109 VDD(IO) — IO supply voltage (3.0-3.6 V)
Pin produk 110 P5[0] — General-purpose IO / SSP2 SCK
Pin produk 111 P5[1] — General-purpose IO / SSP2 SSEL
Pin produk 112 P5[2] — General-purpose IO / SSP2 MISO
Pin produk 113 P5[3] — General-purpose IO / SSP2 MOSI
Pin produk 114 P5[4] — General-purpose IO / ADC0[4]
Pin produk 115 P5[5] — General-purpose IO / ADC0[5]
Pin produk 116 P5[6] — General-purpose IO / ADC0[6]
Pin produk 117 P5[7] — General-purpose IO / ADC0[7]
Pin produk 118 P5[8] — General-purpose IO / I2C1 SDA
Pin produk 119 P5[9] — General-purpose IO / I2C1 SCL
Pin produk 120 RTCX1 — RTC oscillator input
Pin produk 121 RTCX2 — RTC oscillator output
Pin produk 122 VSS — Ground
Pin produk 123 VDD(IO) — IO supply voltage (3.0-3.6 V)
Pin produk 124 RESET — External reset input (active low)
Pin produk 125 P0[16] — General-purpose IO / SPIFI IO3
Pin produk 126 P0[17] — General-purpose IO / SPIFI IO2
Pin produk 127 P0[18] — General-purpose IO / SPIFI IO1
Pin produk 128 P0[19] — General-purpose IO / SPIFI IO0
Pin produk 129 P0[20] — General-purpose IO / SPIFI CLK
Pin produk 130 P0[21] — General-purpose IO / SPIFI CS
Pin produk 131 P0[22] — General-purpose IO / CAN RD2
Pin produk 132 P0[23] — General-purpose IO / CAN TD2
Pin produk 133 P0[24] — General-purpose IO / ADC0[1]
Pin produk 134 P0[25] — General-purpose IO / ADC0[2]
Pin produk 135 P0[26] — General-purpose IO / DAC output
Pin produk 136 P0[27] — General-purpose IO
Pin produk 137 VSS — Ground
Pin produk 138 VDD(ADC), VREF — ADC supply / ADC reference voltage
Pin produk 139 VSSA — Analog ground
Pin produk 140 XTAL1 — Main oscillator input
Pin produk 141 XTAL2 — Main oscillator output
Pin produk 142 VSS — Ground
Pin produk 143 VDD(IO) — IO supply voltage (3.0-3.6 V)
Pin produk 144 P0[28] — General-purpose IO / SWDIO / JTAG TMS

Aplikasi Umum

LPC4088FBD144 cocok untuk 7 aplikasis: Industrial HMI with Touchscreen, USB Audio Device, Industrial Ethernet Gateway, POS Terminal / Payment Device, CAN-Based Motor Control Node, Building Automation Controller, Data Logging / Embedded Recorder.

🏭

Industrial HMI with Touchscreen

The LPC4088FBD144's integrated LCD controller supports STN and TFT panels up to 1024x768, making it ideal for industrial HMI panels. With 120 MHz Cortex-M4F throughput, the device can refresh full graphics buffers at 60 Hz while running FreeRTOS. The 96 KB SRAM holds frame buffers for QVGA displays without external memory, and the SPIFI interface allows fast icon/asset storage on Quad-SPI flash. Place 10 uF and 100 nF decoupling within 5 mm of each VDD pin and route LCD data/clock traces with matched lengths to minimize skew.

Direkomendasikan

LPC4078FBD144 (LCD-optimized variant in same package) FT812Q-T · Bridgetek
🎧

USB Audio Device

The LPC4088FBD144's USB 2.0 High-Speed OTG with on-chip PHY supports USB Audio Class 2.0 at 24-bit/192 kHz, enabling high-fidelity USB DACs and headphone amplifiers. The Cortex-M4F's hardware FPU handles biquad filtering and sample-rate conversion in real time. The 512 KB flash accommodates USB Audio Class firmware plus DSP filter coefficients. Unlike external PHY solutions, the integrated PHY reduces BOM by approximately $1 per board and simplifies USB compliance testing.

Direkomendasikan

PCM1794A (High-performance audio DAC companion) EFM32WG295F256-BGA120 · Silicon Labs
🌐

Industrial Ethernet Gateway

The LPC4088FBD144's 10/100 Ethernet MAC combined with USB, CAN, and UARTs makes it an effective protocol gateway bridging fieldbus networks to Ethernet backbones. With 120 MHz M4F compute, the device can run lwIP TCP/IP stack with TLS while servicing CAN 2.0B and Modbus traffic concurrently. The 96 KB SRAM holds multiple socket buffers and TLS handshake state. Add an external PHY such as the LAN8742A and isolate Ethernet with a 1:1 pulse transformer for 1500 Vrms insulation per IEEE 802.3.

Direkomendasikan

LAN8742A-CZ-TR · Microchip Technology KSZ9031RNXCC · Microchip Technology
💳

POS Terminal / Payment Device

The LPC4088FBD144 suits POS terminals by combining LCD graphics, USB device connectivity for printers, and secure GPIO for keypad/tamper detection. The Cortex-M4F can execute PCI-PTS firmware plus EMV transaction logic within 120 MHz headroom. The 5 V-tolerant GPIO interfaces directly with legacy peripherals without level shifters. Estimated: at full 120 MHz active mode, the device draws approximately 100 mA from 3.3 V; provision a 500 mA LDO for headroom.

Direkomendasikan

HD3SS3212IRKSR · Texas Instruments ISO7761DBQ · Texas Instruments
⚡

CAN-Based Motor Control Node

The LPC4088FBD144 integrates two CAN 2.0B controllers and a PWM/timer subsystem suitable for distributed motor control nodes on CANopen or DeviceNet networks. With the Cortex-M4F's DSP instructions, the device executes field-oriented control loops at 20 kHz while maintaining CAN message latency under 1 ms. The 96 KB SRAM stores motor state and trajectory references. Use 120-ohm termination resistors at each CAN node and isolated CAN transceivers to survive 24 V industrial transients.

Direkomendasikan

ISO1042QDWVRQ1 · Texas Instruments INA819IDR · Texas Instruments
🧩

Building Automation Controller

The LPC4088FBD144's combination of Ethernet, CAN, multiple UARTs, and LCD support makes it a fit for building automation hubs that bridge BACnet, Modbus, and proprietary HVAC protocols. The M4F core at 120 MHz runs BACnet/IP stacks alongside schedule logic with deterministic interrupt response. The SPIFI interface allows external Quad-SPI flash for storing trend logs. Estimated: at 70% CPU utilization with Ethernet active, expect 60 mA core current; include thermal relief copper of at least 200 mm^2 on the LQFP thermal pad.

Direkomendasikan

HDC1080DMBR · Texas Instruments KSZ8895MQXI · Microchip Technology
🖥️

Data Logging / Embedded Recorder

The LPC4088FBD144's EMC external memory controller and SPIFI interface allow attachment of SDRAM plus Quad-SPI NOR flash, making it suitable for high-throughput data loggers. With 120 MHz, the M4F can sample 8-channel ADC at 100 kS/s and write to external storage without bottleneck. The 512 KB internal flash holds boot loader and configuration; bulk data goes to external media. Add an SD card interface on the SSP bus for removable storage and format as FAT32 for PC compatibility.

Direkomendasikan

DS3231MZ+ · Maxim Integrated W25Q64JVSSIQ (Quad-SPI NOR flash storage companion)

Ringkasan Produk Direkomendasikan

LPC4078FBD144 LCD-optimized variant in same package Digunakan di dalam: Industrial HMI with Touchscreen FT812Q-T Bridgetek Digunakan di dalam: Industrial HMI with Touchscreen PCM1794A High-performance audio DAC companion Digunakan di dalam: USB Audio Device EFM32WG295F256-BGA120 Silicon Labs Digunakan di dalam: USB Audio Device LAN8742A-CZ-TR Microchip Technology Digunakan di dalam: Industrial Ethernet Gateway KSZ9031RNXCC Microchip Technology Digunakan di dalam: Industrial Ethernet Gateway HD3SS3212IRKSR Texas Instruments Digunakan di dalam: POS Terminal / Payment Device ISO7761DBQ Texas Instruments Digunakan di dalam: POS Terminal / Payment Device ISO1042QDWVRQ1 Texas Instruments Digunakan di dalam: CAN-Based Motor Control Node INA819IDR Texas Instruments Digunakan di dalam: CAN-Based Motor Control Node HDC1080DMBR Texas Instruments Digunakan di dalam: Building Automation Controller KSZ8895MQXI Microchip Technology Digunakan di dalam: Building Automation Controller DS3231MZ+ Maxim Integrated Digunakan di dalam: Data Logging / Embedded Recorder W25Q64JVSSIQ Quad-SPI NOR flash storage companion Digunakan di dalam: Data Logging / Embedded Recorder
What is the core architecture and clock speed of the LPC4088FBD144?
The LPC4088FBD144 uses an ARM Cortex-M4F core running up to 120 MHz. The M4F variant adds a hardware single-precision floating-point unit and DSP SIMD instructions, making it suitable for embedded signal processing. According to the NXP product page, this 32-bit core targets high-integration and low-power embedded designs.
How much flash and SRAM does the LPC4088FBD144 have?
The LPC4088FBD144 integrates 512 KB of on-chip flash program memory and 96 KB of SRAM. This is sufficient to run FreeRTOS alongside USB and TCP/IP stacks, and the SPIFI interface allows external Quad-SPI flash expansion when additional non-volatile storage is required.
What package does the LPC4088FBD144 use?
The LPC4088FBD144 ships in a 144-pin LQFP package measuring 20x20 mm with 0.5 mm terminal pitch. The LQFP-144 footprint offers generous routing area for high-speed USB, Ethernet, and LCD buses, while remaining hand-solderable for prototypes.
Does the LPC4088FBD144 include Ethernet and USB?
Yes, the LPC4088FBD144 includes a 10/100 Ethernet MAC (external PHY required) and USB 2.0 High-Speed OTG with an on-chip PHY. This makes it well suited for connected embedded designs such as industrial gateways and POS terminals that require simultaneous wired networking and device connectivity.
Where can I download the LPC4088FBD144 datasheet PDF?
The official LPC4088FBD144 datasheet is hosted by NXP at the product page on nxp.com under the Data Sheet tab. The companion LPC408x/407x user manual provides full register descriptions and peripheral programming details. Both documents are also mirrored on third-party sites such as alldatasheet.com.
Where to buy LPC4088FBD144 online at the best price?
As of 2026-10-08, the LPC4088FBD144 is stocked at DigiKey (tape and reel, part number LPC4088FBD144,551), Mouser, and authorized NXP distributors including Flip Electronics and Microchip USA. Volume pricing typically drops below $10 per unit at 1000-piece quantities, and lead times for stock quantities are usually 2-4 weeks.
What is the lead time for LPC4088FBD144 orders?
Based on the Verified Web Data retrieved on 2026-10-08, DigiKey lists the LPC4088FBD144,551 as 'ships today' from distributor stock. For production orders at higher volumes (5,000+ units), lead times from NXP authorized distributors typically range 6-10 weeks depending on factory allocation.
What is the price of LPC4088FBD144 in 1000-piece quantity?
As of 2026-10-08, the LPC4088FBD144,551 is priced at approximately $9.45 per unit at 1000-piece quantity on DigiKey, dropping from $14.82 at single-piece. Volume breaks at 100 and 500 pieces are around $11.42 and $10.18 respectively. Price is subject to change with market allocation.
LPC4088FBD144 vs LPC4078FBD144 - which is better for HMI applications?
The LPC4088FBD144 includes 512 KB of program memory versus 512 KB on the LPC4078, but the 4078 variant features a dedicated LCD controller with enhanced graphics support. According to the NXP family datasheet, both share the LQFP-144 package and pinout. Choose LPC4078 for richer HMI graphics; choose LPC4088 for higher compute headroom.
Can the STM32F407VGT6 replace the LPC4088FBD144?
No, the STM32F407VGT6 cannot drop-in replace the LPC4088FBD144 because the LQFP-144 pinout and peripheral mapping are not pin-compatible. The STM32F407 family uses an LQFP-100 or LQFP-176 footprint, requiring PCB rework. As a functional Cortex-M4 alternative at 168 MHz, it offers higher clock but no direct drop-in path.
When should I choose LPC4088FBD144 over LPC1768FBD144?
Choose the LPC4088FBD144 when you need the Cortex-M4F core with hardware floating-point and DSP instructions; choose the LPC1768FBD144 for legacy Cortex-M3 designs. Both share LQFP-144 pin compatibility within their packages, but the 4088's 120 MHz vs 100 MHz clock and added SPIFI/EMC require firmware redevelopment, not a true drop-in replacement.
What is the best drop-in replacement for LPC4088FBD144?
The best drop-in replacement for the LPC4088FBD144 is the LPC4088FBD144,551 itself (tape-and-reel packaging variant, same die and same LQFP-144 footprint). For a lower-memory alternative within the same package, the LPC4078FBD144 is pin-compatible but offers only 512 KB flash with the LCD-focused feature set.
Is LPC4088FBD144 in stock at major distributors?
According to the Verified Web Data retrieved on 2026-10-08, DigiKey lists LPC4088FBD144,551 as available with same-day shipping. Mouser also reports active inventory. XAIPART recommends confirming stock through the manufacturer product page before placing production orders.
What is the difference between LPC4088FBD144 and LPC4088FBD208?
The LPC4088FBD144 ships in LQFP-144 (20x20 mm, 0.5 mm pitch) with 5 V-tolerant GPIO, while the LPC4088FBD208 uses a larger LQFP-208 package with additional peripheral pins exposed. They are NOT pin-compatible drop-in replacements. The 208-pin version adds more GPIO, additional timers, and wider external bus access for high-density designs.
What is the best cross-brand equivalent for LPC4088FBD144?
There is no pin-compatible cross-brand drop-in replacement for the LPC4088FBD144 in the LQFP-144 footprint, because competing Cortex-M4 families (STM32F407, ATSAM4E) use different pinouts. The closest functional equivalent is the STM32F407ZGT6 in LQFP-144, which shares peripheral count and 1 MB flash but requires PCB rework due to non-matching pin assignments.

Data referensi engineering untuk LPC4088FBD144 — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the LPC4088FBD144 when you need a high-integration Cortex-M4 MCU with built-in LCD, USB High-Speed OTG, Ethernet, and SPIFI in a single LQFP-144 package - ideal for industrial HMI panels, POS terminals, and connected gateways. Choose the LPC4088FBD144,551 (tape-and-reel) for SMT production lines. Choose the LPC4078FBD144 when the application requires enhanced LCD graphics capabilities while remaining within the same package; the LPC4076FBD144 fits when 256 KB flash is sufficient. The LPC4088FET180 is NOT a drop-in replacement - it uses LQFP-180 with extra GPIO and bus pins, requiring PCB rework.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini LPC4088FBD144,551 LPC4078FBD144 LPC4076FBD144 LPC4088FET180
Package LQFP-144 (20x20 mm) LQFP-144 (20x20 mm) - same LQFP-144 (20x20 mm) - same LQFP-144 (20x20 mm) - same LQFP-180 - larger
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Core ARM Cortex-M4F ARM Cortex-M4F ARM Cortex-M4F ARM Cortex-M4F ARM Cortex-M4F
Clock Speed 120 MHz 120 MHz 120 MHz 120 MHz 120 MHz
Flash Memory 512 KB 512 KB 512 KB 256 KB 512 KB
SRAM 96 KB 96 KB 96 KB 96 KB 96 KB
LCD Controller Yes (up to 1024x768) Yes Enhanced (focus part) Yes Yes
USB USB 2.0 HS OTG USB 2.0 HS OTG USB 2.0 HS OTG USB 2.0 HS OTG USB 2.0 HS OTG

Diferensiator Kunci

  • Integrated LCD controller up to 1024x768 with dedicated DMA (vsSTM32F407VGT6)
  • On-chip USB 2.0 High-Speed PHY eliminates external ULPI chip (vsLPC1768FBD144)
  • Cortex-M4F with hardware FPU for DSP workloads (vsLPC1768FBD144)

Catatan Desain

The LPC4088FBD144 operates from a single 3.3 V IO supply plus an internal LDO that derives the core voltage. Place a 10 uF bulk capacitor plus a 100 nF decoupling capacitor within 5 mm of each VDD(IO) and VDD(REG) pin. Add 4.7 uF + 100 nF on VDD(ADC)/VREF to keep ADC readings within 2 LSB accuracy. Estimated: full-load current at 120 MHz with all peripherals active is approximately 100 mA; select an LDO rated at 500 mA minimum.

The LQFP-144 package has a theta_JA of approximately 50 C/W without a thermal pad. Estimated: at 3.3 V x 0.1 A active load the device dissipates 330 mW, producing a 16 C junction temperature rise above ambient - within the industrial -40 C to +85 C envelope. For sealed enclosures with reduced airflow, add a copper pour of at least 200 mm^2 on the top layer to lower theta_JA to approximately 35 C/W.

Route USB D+/D- as a 90 ohm differential pair with length matching to within 150 mil. Place the 27 ohm series USB termination resistors within 4 mm of the MCU pins. The Ethernet TX/RX pairs should also be 100 ohm differential with length matching to within 50 mil. Decoupling capacitors must be placed on the same layer as the MCU with via fanout to an uninterrupted ground plane directly beneath.

Do not enable both SPIFI and the EMC bus simultaneously on conflicting pins - the LPC4088 multiplexes P0[16]-P0[21] between SPIFI and EMC D[12:15]/A[20:23]. According to the NXP user manual, pin assignment must be configured in the pin connect block before peripheral initialization. Also, when using the on-chip USB HS PHY, ensure the VBUS pin is correctly sensed or pulled to VDD for self-powered designs to avoid enumeration failure.

Informasi Konformitas

RoHS
Compliant
REACH
Compliant
AEC-Q100
Not Applicable
Bebas Logam Lengket
Yes
Bebas Halogena
Yes
Mineral Konflik
Compliant

RoHS and lead-free compliance per NXP product page. Not AEC-Q100 qualified - use NXP automotive-grade LPC4088 variants for vehicle applications.

Data disahkan pada: 2026-10-08 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

LPC4088FBD144 LPC4088FBD144 datasheet NXP LPC4088FBD144 LPC4088 ARM Cortex-M4 120MHz LQFP-144 microcontroller 512KB flash LPC4088 industrial HMI LCD controller LPC4088 vs LPC4078 LPC4088 drop-in replacement buy LPC4088FBD144,551 LPC4088 USB High-Speed OTG LPC4088FBD144 price 1000 quantity LPC4088 SPIFI Quad-SPI flash LPC4088 Ethernet MAC 10/100 LPC4088FBD144 pinout LQFP-144 LPC4088 CAN 2.0B motor control

Komponen dan Istilah Terkait

NXP Semiconductors LPC4088FBD144 LPC4088FBD144,551 LPC4078FBD144 LPC4076FBD144 LPC4088FET180 ARM Cortex-M4F microcontroller MCU 32-bit MCU RISC processor LQFP-144 LQFP surface mount USB 2.0 High-Speed OTG Ethernet MAC LCD controller SPIFI Quad-SPI EMC external memory controller CAN 2.0B RoHS AEC-Q100 FreeRTOS embedded processor
Kutipan Cepat RFQ
Tim penjualan kami akan merespon dalam 24 jam
Nomor PartMfrPkgKwantitasHarga Target
×
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

Keranjang Belanja 0 item
Keranjang belanja Anda kosong
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ