LT1187CS8 - Low-Power Video Difference Amplifier | Analog Devices
MPN: LT1187CS8 ✓ AktifLT1187CS8 Ringkasan
A video difference amplifier is a specialized operational-amplifier circuit that accepts two input voltages and amplifies their difference while rejecting voltage shared by both inputs. This function is useful when a signal is referenced to another voltage, when a balanced source must be converted to a single-ended signal, or when common-mode noise must be reduced. Within the broader semiconductor hierarchy, the LT1187CS8 is an analog amplifier, a linear integrated circuit, and a signal-conditioning device for composite video, RGB, and related low-frequency analog signals.
The principal benefits of the LT1187 are its flexible input architecture, low power consumption, high input impedance, and high slew rate. The positive and negative primary inputs are uncommitted, allowing the amplifier to support differential or single-ended signal arrangements. The auxiliary inputs provide independent control of gain and DC output level. The LT1187 is particularly relevant when the system requires a gain of at least 2 and must operate from either ±5 V or a single 5 V rail.
The LT1187CS8 is a low-power relative to the LT1193, while the LT1189 family is intended for applications requiring gains of 10 or more. This positioning makes the LT1187 appropriate for moderate-gain video conditioning rather than very high closed-loop gain. Its differential architecture can reduce the influence of common-mode disturbance when source and return paths experience similar noise, although actual rejection depends on frequency, source balance, layout, and component tolerances.
Typical applications include composite-video buffering, RGB video amplification, differential video input conditioning, laboratory video distribution, and industrial monitoring systems. In each case, the device can operate as a difference amplifier or a single-ended amplifier by configuring the appropriate input pins. The 8-pin SO package also supports conventional surface-mount PCB assembly and compact analog signal-chain layouts.
Designers should preserve the input and output common-mode limits, power both supply rails correctly for the selected configuration, and route high-impedance input nodes with short traces and adequate shielding. Gain-setting components and feedback paths should be positioned close to the device, while unused inputs must be handled according to the manufacturer pin descriptions. For designs requiring gains of 10 or greater, evaluate the LT1189 rather than forcing the LT1187 into a higher-gain application.
This page combines the LT1187 identity, package information, supply configuration, amplifier features, family positioning, pin-level guidance, and technically constrained drop-in alternatives. It is intended to help engineers distinguish the LT1187CS8 from higher-gain or otherwise different video amplifiers before finalizing an analog front end.
Alternatif penggantian untuk LT1187CS8 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
LT1187CS8#PBF
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
LT1187CS8#TRPBF
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
LT1187CS8#TR
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
LT1193CS8
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
LT1189CS8
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
LT1187CS8 Rating Maksimal & Karakteristik Listrik
| Product Type | Low-power video difference amplifier |
| Amplifier Configuration | 1 differential amplifier |
| Optimized Dual Supply Voltage | ±5 V |
| Single-Supply Operating Voltage | 5 V |
| Minimum Supported Single-Supply Gain | ≥2 V/V |
| Primary Input Type | Uncommitted high-impedance (+) and (-) inputs |
| Auxiliary Input Function | Gain adjustment and DC control |
| Operating Mode | Differential or single-ended |
| Paket | 8-pin SO package |
| Terminal Count | 8 terminals |
| Tipe Mounting | Surface mount |
| Package Shape | Rectangular |
| Temperature Grade | Commercial |
| Rentang Suhu Kerja | 0 °C to +70 °C |
LT1187CS8 rectangular Diamant Konfigurasi Panduan
Konfigurasi pin untuk LT1187CS8 (rectangular pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.
Tidak ada data diatribut pin yang tersedia untuk LT1187CS8.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
LT1187CS8 cocok untuk 6 aplikasis: Composite Video Difference Conditioning, RGB Video Signal Balancing, Balanced Video Input Receiver, Single-Ended Video Buffering, Industrial Video Monitoring, Laboratory Video Distribution.
Composite Video Difference Conditioning
The LT1187CS8 is well suited to conditioning a composite video signal when the source must be treated differentially or referenced to another video level. Its one-differential-amplifier architecture accepts high-impedance positive and negative inputs, while the auxiliary input pair permits gain adjustment and DC control. Operating from ±5 V can provide useful signal headroom for composite video, while the single 5 V configuration reduces supply complexity in lower-level systems. The amplifier should be selected only after confirming video bandwidth, closed-loop gain, output swing, and common-mode limits against the manufacturer electrical characteristics.
Direkomendasikan
RGB Video Signal Balancing
The LT1187CS8 can process RGB-related analog signals when each channel requires differential gain, offset control, or a higher-impedance input than the source can directly drive. Its uncommitted positive and negative inputs allow conventional differential use, while the second input set supports independent gain and DC adjustments. The low-power architecture is attractive for multi-channel monitoring equipment, but the circuit must remain within the amplifier's bandwidth, slew-rate, supply, and output-voltage limits. Decouple each supply rail locally and keep feedback and gain-control routing short to preserve stability and signal fidelity.
Direkomendasikan
Balanced Video Input Receiver
A balanced video receiver is a practical application for the LT1187CS8 because its difference-amplifier topology can reduce interference that appears equally on both input lines. The high-impedance primary inputs reduce loading of the source, and the device can operate from dual ±5 V rails for symmetric signal handling. Differential performance depends on matching between the two signal paths, so input routing should be compact and symmetrical. Before implementation, verify the required video bandwidth and common-mode rejection in the frequency range of interest rather than assuming ideal cancellation.
Direkomendasikan
Single-Ended Video Buffering
The LT1187CS8 can also serve as a single-ended video amplifier when one primary input is used as the signal terminal and the amplifier is configured according to the manufacturer recommendations. This arrangement retains the benefits of a dedicated low-power video difference amplifier while simplifying source connections. The auxiliary inputs remain useful for setting closed-loop gain and output DC level. Because input and output common-mode limits constrain single-supply operation, verify the actual video voltage range and required output offset. Stable feedback components and short signal paths remain important even when the source is single-ended.
Direkomendasikan
Industrial Video Monitoring
Industrial monitoring systems can use the LT1187CS8 to condition low-level analog video recovered from cameras, sensors, or distribution networks. Differential input architecture is useful when cable pickup or ground-related disturbance affects both conductors, while the high-impedance inputs reduce loading of long or high-impedance sources. The device is optimized for ±5 V or a single 5 V supply, making it suitable for compact analog modules. System designers should provide local supply bypassing, maintain compatible source impedance, and verify that the selected closed-loop gain remains within the manufacturer's recommended range.
Direkomendasikan
Laboratory Video Distribution
The LT1187CS8 can condition analog video signals in laboratory instrumentation that requires adjustable gain, DC level, or differential input handling. Its auxiliary inputs make it possible to tailor the output level without replacing the complete amplifier stage. The 8-pin SO package supports compact surface-mount implementation, while the low-power operating approach is useful in multi-channel test equipment. Designers should use the manufacturer gain equation, confirm stability with the selected compensation network, and confirm that source loading and cable capacitance do not reduce practical bandwidth or cause excessive distortion.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk LT1187CS8 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | LT1187CS8#PBF | LT1187CS8#TRPBF | LT1187CS8#TR | LT1193CS8 | LT1189CS8 |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 8-SO | 8-SO - same | 8-SO - same | 8-SO - same | 8-SO | 8-SO |
| Product Type | Low-power video difference amplifier | Low-power video difference amplifier | Low-power video difference amplifier | Low-power video difference amplifier | Video difference amplifier | Video difference amplifier |
| Power Positioning | Low-power version of the LT1193 | Low-power version of the LT1193 | Low-power version of the LT1193 | Low-power version of the LT1193 | Original higher-power family member | High-gain alternative; recommended for gain ≥10 |
Diferensiator Kunci
- Lower-power positioning within the Analog Devices video difference-amplifier family (vsLT1193CS8)
- Better alignment with moderate-gain requirements than the high-gain family member (vsLT1189CS8)
- Direct lead-free ordering option for the same 8-pin SO device family (vsLT1187CS8)
Catatan Desain
Route the positive and negative signal inputs symmetrically when using the difference-amplifier configuration. Equal trace geometry and matched nearby components reduce conversion of common-mode disturbance into differential error. Keep the feedback network, auxiliary gain inputs, and DC-control components close to the amplifier pins, and avoid routing these sensitive nodes beneath digital or switching-regulator traces.
Decouple each supply pin locally with the capacitance and ESR range specified in the LT1187 datasheet. Connect the bypass capacitor ground directly to the device ground reference without sharing a long path with video output current. When using a single 5 V supply, verify that the input and output common-mode voltages remain within limits at gain 2 or greater; using ±5 V does not automatically guarantee compliance with every output-voltage requirement.
Use the manufacturer gain and compensation equations rather than selecting feedback values solely from the desired closed-loop gain. Source resistance and cable capacitance affect high-frequency behavior, especially with the amplifier's high-impedance inputs. Terminate unused inputs as directed by the pin descriptions and confirm stability across temperature, supply tolerance, and the complete video bandwidth before production release.
Informasi Konformitas
The LT1187CS8 is a commercial-grade analog IC, so AEC-Q100 qualification is not applicable. RoHS, REACH, halogen-free, and conflict-minerals declarations were not confirmed for the exact order code.