Analog Devices

LT1187CS8 - Low-Power Video Difference Amplifier | Analog Devices

N.º da peça: LT1187CS8 ✓ Ativo
±5 V Vdss 8-pin SO package Package
MOQ: 1 |

LT1187CS8 Visão geral

Analog Devices LT1187CS8 is a low-power video difference amplifier optimized for dual ±5 V operation or a single 5 V supply at gain values of 2 or greater. The device is offered in an 8-pin SO package and provides one differential amplifier with high-impedance positive and negative signal inputs, plus a second input set for gain adjustment and DC control.

A video difference amplifier is a specialized operational-amplifier circuit that accepts two input voltages and amplifies their difference while rejecting voltage shared by both inputs. This function is useful when a signal is referenced to another voltage, when a balanced source must be converted to a single-ended signal, or when common-mode noise must be reduced. Within the broader semiconductor hierarchy, the LT1187CS8 is an analog amplifier, a linear integrated circuit, and a signal-conditioning device for composite video, RGB, and related low-frequency analog signals.

The principal benefits of the LT1187 are its flexible input architecture, low power consumption, high input impedance, and high slew rate. The positive and negative primary inputs are uncommitted, allowing the amplifier to support differential or single-ended signal arrangements. The auxiliary inputs provide independent control of gain and DC output level. The LT1187 is particularly relevant when the system requires a gain of at least 2 and must operate from either ±5 V or a single 5 V rail.

The LT1187CS8 is a low-power relative to the LT1193, while the LT1189 family is intended for applications requiring gains of 10 or more. This positioning makes the LT1187 appropriate for moderate-gain video conditioning rather than very high closed-loop gain. Its differential architecture can reduce the influence of common-mode disturbance when source and return paths experience similar noise, although actual rejection depends on frequency, source balance, layout, and component tolerances.

Typical applications include composite-video buffering, RGB video amplification, differential video input conditioning, laboratory video distribution, and industrial monitoring systems. In each case, the device can operate as a difference amplifier or a single-ended amplifier by configuring the appropriate input pins. The 8-pin SO package also supports conventional surface-mount PCB assembly and compact analog signal-chain layouts.

Designers should preserve the input and output common-mode limits, power both supply rails correctly for the selected configuration, and route high-impedance input nodes with short traces and adequate shielding. Gain-setting components and feedback paths should be positioned close to the device, while unused inputs must be handled according to the manufacturer pin descriptions. For designs requiring gains of 10 or greater, evaluate the LT1189 rather than forcing the LT1187 into a higher-gain application.

This page combines the LT1187 identity, package information, supply configuration, amplifier features, family positioning, pin-level guidance, and technically constrained drop-in alternatives. It is intended to help engineers distinguish the LT1187CS8 from higher-gain or otherwise different video amplifiers before finalizing an analog front end.

Alternativas drop-in para LT1187CS8 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

LT1187CS8#PBF

✅ Drop-In
📦 8-SO
Lead-free order-code suffix with the same LT1187 device and 8-pin SO footprint; electrical ratings must be confirmed against the ordering table

📋 Alternativa de referência (fora do catálogo)

LT1187CS8#TRPBF

✅ Drop-In
📦 8-SO
Lead-free tape-and-reel order code with the same 8-pin SO footprint; shipment format differs by 0 electrical parameters

📋 Alternativa de referência (fora do catálogo)

LT1187CS8#TR

✅ Drop-In
📦 8-SO
Tape-and-reel order code for the 8-pin SO device; electrical behavior is unchanged while shipment format differs

📋 Alternativa de referência (fora do catálogo)

LT1193CS8

✅ Drop-In ⚠️ Especificações não verificadas
📦 8-SO
Higher-speed video difference-amplifier family member with an 8-pin SO option; power and dynamic-performance limits differ and require datasheet verification

📋 Alternativa de referência (fora do catálogo)

LT1189CS8

✅ Drop-In ⚠️ Especificações não verificadas
📦 8-SO
Video difference-amplifier family member intended for gain of 10 or more versus the LT1187's moderate-gain role, a minimum gain difference of 5:1

📋 Alternativa de referência (fora do catálogo)

LT1187CS8 Classificações máximas e características elétricas

Product Type Low-power video difference amplifier
Amplifier Configuration 1 differential amplifier
Optimized Dual Supply Voltage ±5 V
Single-Supply Operating Voltage 5 V
Minimum Supported Single-Supply Gain ≥2 V/V
Primary Input Type Uncommitted high-impedance (+) and (-) inputs
Auxiliary Input Function Gain adjustment and DC control
Operating Mode Differential or single-ended
Encapsulamento 8-pin SO package
Terminal Count 8 terminals
Tipo de montagem Surface mount
Package Shape Rectangular
Temperature Grade Commercial
Faixa de temperatura de operação 0 °C to +70 °C

Guia de Configuração de Pinos do LT1187CS8 rectangular

Configuração de pinos para LT1187CS8 (pacote rectangular). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.

Diagrama de pinagem do pacote rectangular para LT1187CS8

Nenhum dado detalhado de pinagem disponível para LT1187CS8.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

LT1187CS8 é adequado para 6 aplicaçãos: Composite Video Difference Conditioning, RGB Video Signal Balancing, Balanced Video Input Receiver, Single-Ended Video Buffering, Industrial Video Monitoring, Laboratory Video Distribution.

📺

Composite Video Difference Conditioning

The LT1187CS8 is well suited to conditioning a composite video signal when the source must be treated differentially or referenced to another video level. Its one-differential-amplifier architecture accepts high-impedance positive and negative inputs, while the auxiliary input pair permits gain adjustment and DC control. Operating from ±5 V can provide useful signal headroom for composite video, while the single 5 V configuration reduces supply complexity in lower-level systems. The amplifier should be selected only after confirming video bandwidth, closed-loop gain, output swing, and common-mode limits against the manufacturer electrical characteristics.

📺

RGB Video Signal Balancing

The LT1187CS8 can process RGB-related analog signals when each channel requires differential gain, offset control, or a higher-impedance input than the source can directly drive. Its uncommitted positive and negative inputs allow conventional differential use, while the second input set supports independent gain and DC adjustments. The low-power architecture is attractive for multi-channel monitoring equipment, but the circuit must remain within the amplifier's bandwidth, slew-rate, supply, and output-voltage limits. Decouple each supply rail locally and keep feedback and gain-control routing short to preserve stability and signal fidelity.

🌐

Balanced Video Input Receiver

A balanced video receiver is a practical application for the LT1187CS8 because its difference-amplifier topology can reduce interference that appears equally on both input lines. The high-impedance primary inputs reduce loading of the source, and the device can operate from dual ±5 V rails for symmetric signal handling. Differential performance depends on matching between the two signal paths, so input routing should be compact and symmetrical. Before implementation, verify the required video bandwidth and common-mode rejection in the frequency range of interest rather than assuming ideal cancellation.

🔧

Single-Ended Video Buffering

The LT1187CS8 can also serve as a single-ended video amplifier when one primary input is used as the signal terminal and the amplifier is configured according to the manufacturer recommendations. This arrangement retains the benefits of a dedicated low-power video difference amplifier while simplifying source connections. The auxiliary inputs remain useful for setting closed-loop gain and output DC level. Because input and output common-mode limits constrain single-supply operation, verify the actual video voltage range and required output offset. Stable feedback components and short signal paths remain important even when the source is single-ended.

🎥

Industrial Video Monitoring

Industrial monitoring systems can use the LT1187CS8 to condition low-level analog video recovered from cameras, sensors, or distribution networks. Differential input architecture is useful when cable pickup or ground-related disturbance affects both conductors, while the high-impedance inputs reduce loading of long or high-impedance sources. The device is optimized for ±5 V or a single 5 V supply, making it suitable for compact analog modules. System designers should provide local supply bypassing, maintain compatible source impedance, and verify that the selected closed-loop gain remains within the manufacturer's recommended range.

🖥️

Laboratory Video Distribution

The LT1187CS8 can condition analog video signals in laboratory instrumentation that requires adjustable gain, DC level, or differential input handling. Its auxiliary inputs make it possible to tailor the output level without replacing the complete amplifier stage. The 8-pin SO package supports compact surface-mount implementation, while the low-power operating approach is useful in multi-channel test equipment. Designers should use the manufacturer gain equation, confirm stability with the selected compensation network, and confirm that source loading and cable capacitance do not reduce practical bandwidth or cause excessive distortion.

What is the LT1187CS8?
The LT1187CS8 is an Analog Devices low-power video difference amplifier in an 8-pin SO package. According to the Analog Devices LT1187 product page, it is optimized for ±5 V dual-supply operation or a single 5 V supply at gain of 2 or greater. Its primary positive and negative inputs are high impedance and uncommitted, while a second input set provides gain adjustment and DC control. It can therefore be configured for differential or single-ended signal conditioning.
What supply voltages and gain range does the LT1187CS8 support?
The LT1187CS8 is optimized for ±5 V operation or a single 5 V supply with gain of at least 2 V/V. The Analog Devices product page identifies both power arrangements as intended operating configurations. A single 5 V supply is appropriate where the signal and output levels remain within the device's common-mode limits; dual supplies provide additional headroom for bipolar video signals. The exact minimum and maximum supply ratings should be confirmed against the manufacturer datasheet before final circuit design.
Where can I download the LT1187CS8 datasheet PDF?
The official LT1187 datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/1187fb.pdf. The manufacturer document describes the LT1187 as a low-power video difference amplifier available in 8-pin mini-DIP and SO packages. Use the pin-description and electrical-characteristics tables in that PDF to verify supply limits, common-mode range, gain equations, compensation requirements, and the complete 8-pin SO pinout.
Where can I find the LT1187CS8 pinout?
The LT1187CS8 pinout is documented in the Analog Devices LT1187 datasheet, which includes the 8-pin SO package drawing and pin descriptions. Because the manufacturer datasheet is the authoritative source for terminal names, use its pin table when assigning signal, feedback, supply, and reference connections. The device uses the SO-8 footprint, so do not infer a pinout from another amplifier package or from the functionally similar mini-DIP version.
How does the LT1187CS8 differ from the LT1193?
The LT1187 is the low-power version of the LT1193, while both devices are video difference amplifiers. According to the Analog Devices LT1187 datasheet, the LT1187 is intended for gains where low power is valuable, whereas the LT1189 should be considered for gains of 10 or more. A device with similar function is not automatically a drop-in replacement: confirm the exact pin assignment, gain range, supply ratings, slew rate, bandwidth, and output swing before substituting one amplifier for the other.
LT1187CS8 vs LT1193CS8 — which is better for a low-power video amplifier?
Choose the LT1187CS8 when low power is a primary requirement and the required closed-loop gain is modest; choose the LT1193CS8 when its higher-speed or drive characteristics are needed within the verified operating limits. The Analog Devices datasheet explicitly describes the LT1187 as a low-power version of the LT1193. A valid comparison must include supply current, slew rate, gain-bandwidth behavior, common-mode range, output swing, and pin compatibility rather than relying on the shared video-amplifier description.
When should I choose the LT1187CS8 instead of the LT1189?
Choose the LT1187CS8 for low-power, moderate-gain video conditioning where the required closed-loop gain is below the range for which the LT1189 is recommended. The LT1187 datasheet states that applications requiring gains of 10 or more should use the LT1189. The LT1187 remains appropriate for moderate gain around 2 or greater, differential or single-ended operation, and systems operating from ±5 V or a single 5 V supply.
Is the LT1187CS8 suitable for composite and RGB video signals?
The LT1187CS8 is suitable for many composite-video and RGB video conditioning applications because it is a dedicated low-power video difference amplifier with high-impedance inputs and flexible gain control. Its differential operation can help reject voltage common to two signal lines, while single-ended operation provides a simpler path for ordinary source conditioning. Signal bandwidth, closed-loop gain, output swing, and the source's common-mode level must still be checked against the electrical characteristics in the manufacturer datasheet.
What can replace the LT1187CS8?
The closest documented replacement is the lead-free LT1187CS8#PBF, which retains the LT1187 device type and 8-pin SO package while carrying a different orderable suffix. Tape-and-reel and packaged order codes may also identify the same die and footprint, but suffix changes must be checked for temperature grade, shipping format, and procurement status. Confirm the pinout, supply range, gain equations, and electrical limits before treating any alternate order code as a drop-in replacement.
Is the LT1187CS8 the same as the LT1187CS8#PBF?
The LT1187CS8 and LT1187CS8#PBF identify lead-free orderable versions of the same LT1187 family device in the 8-pin SO package. The #PBF suffix denotes lead-free termination rather than a different amplifier topology. For PCB interchangeability, verify that both have the same pin assignments, electrical ratings, operating-temperature grade, and footprint dimensions. Packaging or shipment suffixes must not be interpreted as automatic electrical equivalence without checking the relevant ordering table.
What are the key specifications of LT1187CS8 that engineers should know?
The key LT1187CS8 specifications are its one-differential-amplifier configuration, 8-pin SO package, operation optimized for ±5 V or a single 5 V supply, minimum gain of 2 for single-supply use, high-impedance primary inputs, and auxiliary gain-adjustment and DC-control inputs. The manufacturer also identifies it as a low-power video difference amplifier with high slew rate. Confirm exact bandwidth, slew-rate, supply-current, input-offset, and common-mode values in the LT1187 datasheet before release.
Where can I buy LT1187CS8 online?
Use the Request a Quote form on this page to request the LT1187CS8, current availability, and orderable suffix information. The manufacturer product page identifies the LT1187 family, while distributor listings cover the commercial 8-pin SO device. When requesting a quote, state whether you need the base LT1187CS8 designation, the lead-free LT1187CS8#PBF version, or a specific shipment format so the exact manufacturer part number and temperature grade can be confirmed.
What is the price of LT1187CS8?
Current pricing for the LT1187CS8 is obtained through the Request a Quote form on this page. The quote should be tied to the exact orderable MPN and required quantity because base, lead-free, and shipment-format suffixes may be grouped differently. The form can also confirm stock status and the applicable commercial terms without relying on a potentially stale catalog price.
What is the lead time and stock status for LT1187CS8?
The current lead time and stock status for LT1187CS8 should be requested through the Request a Quote form on this page. State the exact base or lead-free order code, required quantity, and whether tape-and-reel packaging is needed. Lifecycle status alone does not guarantee immediate inventory, and a distributor page marked as shipping should not be treated as confirmation of a specific manufacturer suffix without checking the full order code.
Is there an Analog Devices equivalent for the LT1187CS8?
The closest same-manufacturer option is an orderable lead-free LT1187 variant, such as LT1187CS8#PBF, because it retains the LT1187 amplifier family and 8-pin SO package. The LT1189 is a related Analog Devices video difference amplifier family, but it is positioned for gains of 10 or more and should not be selected as an automatic replacement. The Analog Devices LT1187 datasheet should be used to confirm pin compatibility and electrical equivalence for the specific suffix being considered.

Dados de referência de engenharia para LT1187CS8 — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the LT1187CS8 for low-power video conditioning with one differential amplifier, high-impedance primary inputs, adjustable gain, DC control, and operation from ±5 V or a single 5 V supply. Select LT1187CS8#PBF when a lead-free order code is required, or LT1187CS8#TRPBF and LT1187CS8#TR when the specified shipment format is appropriate. Choose LT1193CS8 when the higher-power LT1193 performance range is preferable and the full electrical and pin requirements still match. Choose LT1189CS8 for applications requiring closed-loop gain of 10 or more. Before replacing the base LT1187CS8, verify the pinout, supply limits, input and output common-mode ranges, gain equations, bandwidth, slew rate, quiescent current, temperature grade, and footprint. The LT1187 family is best when low power and moderate gain are the main priorities; the LT1193 and LT1189 are more specialized choices whose performance and gain positioning differ.

Comparação com alternativas

Parâmetro Este produto LT1187CS8#PBF LT1187CS8#TRPBF LT1187CS8#TR LT1193CS8 LT1189CS8
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package 8-SO 8-SO - same 8-SO - same 8-SO - same 8-SO 8-SO
Product Type Low-power video difference amplifier Low-power video difference amplifier Low-power video difference amplifier Low-power video difference amplifier Video difference amplifier Video difference amplifier
Power Positioning Low-power version of the LT1193 Low-power version of the LT1193 Low-power version of the LT1193 Low-power version of the LT1193 Original higher-power family member High-gain alternative; recommended for gain ≥10

Principais diferenciais

  • Lower-power positioning within the Analog Devices video difference-amplifier family (vs LT1193CS8)
  • Better alignment with moderate-gain requirements than the high-gain family member (vs LT1189CS8)
  • Direct lead-free ordering option for the same 8-pin SO device family (vs LT1187CS8)

Notas de projeto

Route the positive and negative signal inputs symmetrically when using the difference-amplifier configuration. Equal trace geometry and matched nearby components reduce conversion of common-mode disturbance into differential error. Keep the feedback network, auxiliary gain inputs, and DC-control components close to the amplifier pins, and avoid routing these sensitive nodes beneath digital or switching-regulator traces.

Decouple each supply pin locally with the capacitance and ESR range specified in the LT1187 datasheet. Connect the bypass capacitor ground directly to the device ground reference without sharing a long path with video output current. When using a single 5 V supply, verify that the input and output common-mode voltages remain within limits at gain 2 or greater; using ±5 V does not automatically guarantee compliance with every output-voltage requirement.

Use the manufacturer gain and compensation equations rather than selecting feedback values solely from the desired closed-loop gain. Source resistance and cable capacitance affect high-frequency behavior, especially with the amplifier's high-impedance inputs. Terminate unused inputs as directed by the pin descriptions and confirm stability across temperature, supply tolerance, and the complete video bandwidth before production release.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The LT1187CS8 is a commercial-grade analog IC, so AEC-Q100 qualification is not applicable. RoHS, REACH, halogen-free, and conflict-minerals declarations were not confirmed for the exact order code.

Buscas relacionadas

LT1187CS8 datasheet LT1187CS8 datasheet pdf LT1187CS8 pinout LT1187CS8 equivalent LT1187CS8 replacement LT1187CS8 cross reference LT1187CS8 vs LT1193CS8 LT1187CS8 price LT1187CS8 stock Analog Devices LT1187CS8 LT1187CS8 SO-8 pinout LT1187CS8 video amplifier

Componentes & termos relacionados

Analog Devices LT1187CS8 LT1187CS8#PBF LT1187CS8#TRPBF LT1187CS8#TR LT1193CS8 LT1189CS8 video difference amplifier difference amplifier operational amplifier analog amplifier linear integrated circuit signal-conditioning IC semiconductor single-ended operation differential operation high input impedance gain adjustment DC control composite video RGB video balanced video input common-mode rejection 8-pin SO package SOIC family surface-mount package
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ