Texas Instruments

MAX232DWRG4 - Dual 120kbps RS-232 | Texas Instruments

MPN: MAX232DWRG4 ✓ Aktif
5 V Vdss EIA-232-F, TIA-232-F, V.28 Rds(on) 16-pin SOIC Package
MOQ: 1 |

MAX232DWRG4 Ringkasan

Texas Instruments MAX232DWRG4 is a 5 V dual-channel RS-232 line transceiver with 120 kbps data rate, ±9 V driver output, and ±2 kV ESD protection, housed in a 16-pin SOIC package. The device combines two line drivers and two line receivers, allowing bidirectional serial communication between TTL/CMOS logic and an EIA/TIA-232 link.

An RS-232 transceiver is an interface IC that translates low-voltage digital logic levels into the positive and negative voltage levels used by RS-232 equipment. Within the interface hierarchy, it belongs to the line-driver and line-receiver family, provides physical-layer signal conditioning, and bridges a host controller or UART with an external data port.

Key features include a single 5 V supply, operation up to 120 kbps, ±9 V driver output levels, and ±2 kV ESD protection. The integrated dual-driver and dual-receiver configuration supports two communication channels in one package. Its commercial-grade operating range is 0°C to 70°C, making it appropriate for room-temperature industrial, instrumentation, and embedded-control systems.

The MAX232DWRG4 uses charge-pump circuitry to generate the bipolar voltage levels required by RS-232 from one 5 V supply. Its receiver converts incoming EIA-232-F signals into TTL/CMOS-compatible levels, while its driver converts outgoing logic levels into RS-232 signals. The interface conforms to EIA-232-F, TIA-232-F, and V.28 requirements identified for this device.

Typical uses include industrial control panels, serial test equipment, data acquisition systems, point-of-sale terminals, and embedded RS-232 ports. Its 120 kbps capability is suitable for moderate-speed point-to-point links, although modern high-speed or long-distance designs may require a more suitable RS-232 transceiver family.

PCB implementation should follow the manufacturer pin-description and capacitor-connection diagrams. Place charge-pump capacitors close to their specified pins, keep RS-232 routing away from sensitive analog and high-speed clock traces, and provide suitable logic-side ground return paths. The external RS-232 connector may also require additional transient-protection measures for exposed cables.

This page combines the manufacturer’s principal electrical ratings with package details, interface standards, replacement guidance, and practical layout considerations. It is intended to help engineers evaluate the MAX232DWRG4 for 5 V RS-232 designs and identify compatible second-source options without changing the 16-pin SOIC footprint.

Alternatif penggantian untuk MAX232DWRG4 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian MAX232DWRG4 (sama faktor bentuk dan footprint) — berbeda di dalam Maximum Data Rate, Product Type.

Texas Instruments
Maximum Data Rate: 120 kbit/s
Product Type: Dual RS-232 driver/receiver transceiver
Bandingkan dengan MAX232DWRG4 →

MAX232DWR

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
Texas Instruments
📦 16-pin SOIC
Dual RS-232 driver/receiver transceiver · 2 · 2 · 5 V · 120 kbit/s · ±9 V · ±30 V · ±2 kV

Kontak untuk harga

Lihat Datasheet →

MAX232DWE4

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
Texas Instruments
📦 16-pin SOIC
2 drivers / 2 receivers · RS-232 / EIA-232 · V.28 · 120 kbit/s · 5 V · 1.0-mF · ±30 V · 8 mA typical

Kontak untuk harga

Lihat Datasheet →

MAX232CWE4

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 16-pin SOIC
Same 5 V dual RS-232 pin arrangement and 16-pin SOIC footprint; charge-pump capacitor configuration requires verification against the target circuit

📋 Alternatif referensi (tidak dalam katalog)

MAX232AWE4

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 16-pin SOIC
Same 5 V dual RS-232 pin arrangement and 16-pin SOIC footprint; external capacitor selection and timing details require circuit-level verification

📋 Alternatif referensi (tidak dalam katalog)

ST232BDR

✅ Drop-In
📦 16-pin SOIC
Same dual-driver, dual-receiver RS-232 function and 16-pin SOIC footprint; capacitor values, timing, thresholds, and protection ratings require verification

📋 Alternatif referensi (tidak dalam katalog)

MAX232DWRG4 Spesifikasi

Product Type Dual RS-232 line transceiver
Number of Drivers 2
Number of Receivers 2
Tegangan Pemuat 5 V
Maximum Data Rate 120 kbps
Driver Output Level ±9 V
ESD Protection ±2 kV
Interface Standards EIA-232-F, TIA-232-F, V.28
Paket 16-pin SOIC
Terminal Count 16
Temperature Grade Commercial
Suhu Kerja 0°C to 70°C
Peak Reflow Temperature 260°C
Tipe Mounting Surface mount
Lead Form Gull wing
Package Code SOP
Package Shape Rectangular

Konfigurasi Pin MAX232DWRG4

SOIC-16 Package Pinout Diagram SOIC-16 16-pin, 3.9x9.9mm, P1.27mm, JEDEC MS-012. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 SOIC-16
Pin produk 1 R1OUT — Receiver 1 output
Pin produk 2 R2OUT — Receiver 2 output
Pin produk 3 R2IN — Receiver 2 input
Pin produk 4 R1IN — Receiver 1 input
Pin produk 5 GND — Ground
Pin produk 6 V+ — Positive supply voltage
Pin produk 7 R1IN — Receiver 1 input
Pin produk 8 R2IN — Receiver 2 input
Pin produk 9 R2OUT — Receiver 2 output
Pin produk 10 R1OUT — Receiver 1 output
Pin produk 11 T1IN — Driver 1 input
Pin produk 12 T2IN — Driver 2 input
Pin produk 13 T2OUT — Driver 2 output
Pin produk 14 T1OUT — Driver 1 output
Pin produk 15 C2 — Charge-pump capacitor connection
Pin produk 16 C1 — Charge-pump capacitor connection

Aplikasi Umum

MAX232DWRG4 cocok untuk 6 aplikasis: Industrial Control Panels, Data Acquisition Systems, Embedded Serial Port Expansion, Instrumentation and Test Equipment, Point-of-Sale Terminals, Communication and Networking Equipment.

🏭

Industrial Control Panels

The MAX232DWRG4 fits industrial control panels that connect a 5 V controller to an RS-232 service port, programming interface, or external instrument. Its two transmitters and two receivers provide two channels in one 16-pin SOIC, while the 120 kbps maximum rate is appropriate for configuration links, command traffic, and moderate data transfers. The commercial 0°C to 70°C range suits controlled indoor equipment. Designers should isolate the RS-232 traces from motors and switching nodes, use the manufacturer-specified charge-pump capacitor connections, and assess whether a protected connector or additional transient suppressor is needed for field-wired cables.

🖥️

Data Acquisition Systems

The MAX232DWRG4 is useful in laboratory and industrial data-acquisition equipment that must exchange commands and sampled data with a host computer over RS-232. The 120 kbps rate supports low- and moderate-speed acquisition channels, while the dual-channel architecture can connect separate command and data paths. Its single 5 V supply simplifies interfacing with TTL/CMOS logic. For reliable operation, keep the interface connector and cable routing away from high-gain analog inputs, provide a low-impedance return path, and verify the receiver thresholds and line capacitance under the actual cable length and baud-rate conditions.

🧩

Embedded Serial Port Expansion

The MAX232DWRG4 allows a modern embedded controller with a limited number of UART channels to connect two RS-232 ports to legacy equipment. Its 120 kbps capability suits configuration, monitoring, and short message-transfer tasks rather than high-throughput continuous streaming. The compact 16-pin SOIC simplifies routing on a mixed-signal embedded board, while the integrated dual-driver and dual-receiver arrangement reduces the number of separate interface devices. Firmware and hardware designers should expose separate enable or multiplexing controls where required, verify logic levels, and test the complete link for startup transients and cable-induced noise.

🔧

Instrumentation and Test Equipment

The MAX232DWRG4 is appropriate for test and measurement instruments that expose a PC-compatible RS-232 port for commands, calibration data, or diagnostic output. A 5 V supply, 120 kbps throughput, and two full-duplex channels allow one port for control traffic and another for status or measurement data. The 16-pin SOIC package is convenient for compact instruments, but analog and high-impedance measurement sections require careful isolation from digital return currents. Use a solid ground strategy, minimize connector-to-IC routing, and verify transient protection because bench instruments can be connected to user-controlled external cables.

🏬

Point-of-Sale Terminals

The MAX232DWRG4 can support legacy point-of-sale peripherals that exchange serial commands through an EIA/TIA-232 connection. Its two transmitters and receivers allow separate communication paths, while the 5 V operation and 120 kbps rate are compatible with many service ports and older transaction peripherals. The commercial temperature range suits indoor terminals. System integrators should account for electrostatic discharge at the user-accessible connector, preserve common-mode margin across grounded and ungrounded equipment, and select cable length and baud rate using a practical RS-232 margin assessment rather than treating the 120 kbps rating as a guaranteed distance.

🌐

Communication and Networking Equipment

The MAX232DWRG4 can bridge a 5 V communications controller to an RS-232 management port in routers, switches, and industrial communication equipment. The 120 kbps rate is suitable for configuration, diagnostics, and legacy management traffic, and the dual-channel configuration can support separate command and status links. Place the transceiver near the connector when practical, maintain a continuous signal-ground reference, and keep the RS-232 traces away from Ethernet magnetics, high-speed processors, and switching power stages. For network products, validate the design against the system’s grounding model, surge requirements, and enclosure-level ESD test plan.

What is the MAX232DWRG4?
The MAX232DWRG4 is a Texas Instruments 5 V dual-channel RS-232 transceiver containing two line drivers and two line receivers. According to the manufacturer product page, it supports data rates up to 120 kbps, provides ±9 V driver outputs, and includes ±2 kV ESD protection. The device converts between TTL/CMOS signals and EIA/TIA-232-F levels while operating from a single 5 V supply in a 16-pin SOIC package.
What is the operating voltage of MAX232DWRG4?
The MAX232DWRG4 operates from a nominal 5 V supply. The manufacturer describes the MAX232 as a 5 V RS-232 line driver and receiver, with two driver channels and two receiver channels. Its integrated charge-pump circuitry produces the bipolar signal levels needed by RS-232 from that single supply, allowing the logic side to use standard TTL/CMOS voltage levels.
What is the maximum data rate of MAX232DWRG4?
The MAX232DWRG4 supports a maximum data rate of 120 kbps. According to the Texas Instruments product page, this rate applies to the dual RS-232 driver and receiver function. It makes the device appropriate for moderate-speed point-to-point serial links, but system designers should verify cable length, capacitance, baud rate, and signal-integrity requirements for the intended RS-232 environment.
Does MAX232DWRG4 provide ESD protection?
The MAX232DWRG4 provides ±2 kV ESD protection according to the Texas Instruments product page. This rating applies to the device’s RS-232 interface capability. Because an external cable can expose the connector to larger surges or electrostatic-discharge events, production equipment may still need separate surge or ESD protection coordinated with the system’s grounding and signal requirements.
Which standards does MAX232DWRG4 support?
The MAX232DWRG4 supports EIA-232-F, TIA-232-F, and V.28 serial-interface requirements. These standards define the electrical characteristics of RS-232 links, including bipolar signaling and the relationship between logic-side and line-side levels. The device includes drivers and receivers for two channels, making it suitable for bidirectional point-to-point RS-232 equipment interfaces.
Where can I download the MAX232DWRG4 datasheet PDF?
The official MAX232 product page at Texas Instruments provides the manufacturer’s technical documentation and ordering information for the MAX232DWRG4. Use that page to locate the current MAX232 datasheet PDF and package information. The device-specific datasheet also gives the authoritative pin descriptions, charge-pump capacitor connections, electrical characteristics, and recommended application circuit.
Where can I find the MAX232DWRG4 pinout?
The MAX232DWRG4 pinout is found in the pin-description table and package drawing in the manufacturer’s MAX232 datasheet. The 16-pin SOIC arrangement separates the logic-side driver inputs, receiver outputs, charge-pump capacitor pins, supply, and ground. Use the package drawing to confirm counterclockwise pin numbering and the exposed connection requirements before assigning PCB tracks.
What is the best drop-in replacement for MAX232DWRG4?
The ST232BDR is a documented cross-brand option for the MAX232DWRG4 because it implements two RS-232 drivers and two receivers in the same 16-pin SOIC format. Compatibility still requires checking capacitor values, propagation delay, receiver threshold, supply limits, and temperature grade before production release. Use the Request a Quote form on this page for current sourcing information on either device.
Can ST232BDR replace MAX232DWRG4?
The ST232BDR can serve as a candidate replacement because it is a 16-pin, two-driver and two-receiver RS-232 device intended for single-supply operation. Before substituting it, verify the complete pin mapping and external capacitor values against both datasheets. A package match alone does not guarantee identical timing, threshold, ESD, or temperature performance, so qualify the change in the target system.
What can replace MAX232DWRG4?
Candidate replacements include the Texas Instruments MAX232DWR, MAX232DWE4, MAX232CWE4, and MAX232AWE4 in the same SO-16 footprint, plus the STMicroelectronics ST232BDR from the cross-reference results. Not every ordering suffix or charge-pump capacitor arrangement is interchangeable without circuit review. Confirm pinout, capacitor values, data rate, and qualification requirements before replacing the installed device.
What is the best STMicroelectronics equivalent for MAX232DWRG4?
The ST232BDR is the best-supported STMicroelectronics equivalent identified for the MAX232DWRG4 because it is a two-driver, two-receiver RS-232 interface in a 16-pin SOIC package. It is a functional and footprint candidate rather than an automatic substitution. Compare the manufacturer data sheets for external capacitors, electrical thresholds, timing, ESD rating, and operating-temperature limits before approving it.
MAX232DWRG4 vs ST232BDR - which is better for an RS-232 interface?
Both devices support a dual-driver and dual-receiver RS-232 interface in a 16-pin SOIC package, so the deciding factors are detailed electrical characteristics and project requirements. Choose the MAX232DWRG4 when its manufacturer-published 120 kbps rate, ±9 V output, ±2 kV ESD rating, and 0°C to 70°C commercial range match the design. Choose ST232BDR only after its pin and capacitor details pass qualification.
When should I choose MAX232DWRG4 over ST232BDR?
Choose MAX232DWRG4 when the design values a documented 120 kbps operating rate, ±9 V driver output, ±2 kV ESD protection, and a commercial temperature range of 0°C to 70°C. These are explicit characteristics of the target device. ST232BDR may be advantageous for supply-chain diversification, but it should be selected only after confirming equivalent timing, thresholds, ESD performance, and capacitor requirements.
Is MAX232DWRG4 suitable for industrial equipment?
The MAX232DWRG4 is suitable for commercial-temperature industrial equipment operating between 0°C and 70°C when its RS-232 requirements are otherwise compatible. Its 5 V supply, 120 kbps data rate, and ±2 kV ESD protection fit many embedded controller and data-acquisition interfaces. For installations with wider temperature ranges, outdoor exposure, or severe transients, select a device rated for those conditions.
How should MAX232DWRG4 be laid out on a PCB?
Place the MAX232DWRG4 charge-pump capacitors close to their specified pins and connect the RS-232-side routing away from sensitive analog and clock signals. Maintain a clear logic ground return beneath the interface area, follow the manufacturer’s pin numbering, and provide unobstructed copper around all 16 SOIC leads. External protection may be added at a connector where the attached cable creates a greater ESD or surge threat.
Is MAX232DWRG4 active and commercially available?
The manufacturer product page lists the MAX232 family as an active product family, and the MAX232DWRG4 is presented as a 16-SOIC ordering option with commercial-grade specifications. Current inventory, minimum order quantity, lead time, and delivery status can change. Submit a request through the Request a Quote form on this page to obtain a current supply response for the exact MPN.
Where can I buy MAX232DWRG4 online?
Use the Request a Quote form on this page to request MAX232DWRG4 availability, lead time, and a current order response for the exact 16-pin SOIC MPN. The form avoids publishing transient stock assumptions and ensures that the requested package, grade, quantity, and delivery requirements are evaluated together. No fixed price should be inferred from a search-result headline or a family-level listing.
What is the price of MAX232DWRG4?
Current pricing for MAX232DWRG4 should be obtained through the Request a Quote form on this page. Price can vary with order quantity, packaging, delivery terms, and supply conditions, so a search-result headline is not a reliable quotation. Provide the required quantity and target delivery details with the request to receive an applicable response.
What is the lead time for MAX232DWRG4?
The current lead time for MAX232DWRG4 should be requested through the Request a Quote form on this page. Lead time depends on available factory inventory, order volume, and requested delivery terms, which are not established by a product-page summary. Include the required quantity, date code preference, and destination so the supply response can reflect the actual procurement request.
Is MAX232DWRG4 in stock?
Current stock for MAX232DWRG4 should be confirmed through the Request a Quote form on this page rather than inferred from a generic product listing. Inventory status changes by quantity, packaging configuration, and fulfillment location. Submit the exact MPN and required quantity to obtain a current availability confirmation from the XAIPART sales team.

Data referensi engineering untuk MAX232DWRG4 — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the MAX232DWRG4 for a new 5 V RS-232 design when a manufacturer-documented 120 kbps data rate, ±9 V driver output, ±2 kV ESD rating, and 0°C to 70°C commercial range satisfy the design. The two transmitters and two receivers in a 16-pin SOIC are useful for bidirectional command, data, and status links. MAX232DWR or MAX232DWE4 can serve as Texas Instruments alternatives when the ordering suffix and shipping configuration fit the BOM, but verify the capacitor and pin details. MAX232CWE4 and MAX232AWE4 share the SO-16 architecture but require careful review of charge-pump capacitor values and timing. ST232BDR can support supply-chain diversification, but its pin mapping, thresholds, propagation delay, ESD rating, and external capacitor requirements should be compared before substitution.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini MAX232DWR MAX232DWE4 MAX232CWE4 MAX232AWE4 ST232BDR
Package 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments STMicroelectronics
Product Type Dual RS-232 transceiver Dual RS-232 transceiver Dual RS-232 transceiver Dual RS-232 transceiver Dual RS-232 transceiver Two-driver and two-receiver RS-232 interface
Number of Drivers 2 2 2 2 2 2
Number of Receivers 2 2 2 2 2 2
Supply Voltage 5 V 5 V 5 V 5 V 5 V 5 V

Diferensiator Kunci

  • Documented high-speed RS-232 capability (vsST232BDR)
  • Published interface protection level (vsST232BDR)
  • Single-supply bipolar RS-232 operation (vsMAX232AWE4)
  • Two-channel integration in a 16-pin SOIC (vsMAX232DWE4)

Catatan Desain

Place the charge-pump capacitors at the pins designated C1 and C2 and keep their connections short. Route the two RS-232 driver outputs and receiver inputs directly toward the connector while maintaining separation from precision analog inputs and high-speed digital traces. The SOIC ground lead must connect to a low-impedance plane, and the logic and RS-232 return paths should not share narrow necks.

Keep the MAX232DWRG4 away from switching-regulator inductors, relay coils, motor traces, and high di/dt power paths. A solid ground plane and short charge-pump capacitor connections reduce radiated and conducted coupling. If the RS-232 connector is externally accessible, evaluate a dedicated transient-protection network at the connector because the device’s ±2 kV ESD rating does not automatically cover larger system-level surge events.

Do not treat the 120 kbps rating as a guaranteed cable distance or a guarantee that every receiver threshold will operate with the system’s ground reference. Confirm capacitor values, baud rate, cable capacitance, grounding, and logic levels against the manufacturer application guidance. When substituting another 16-pin device, compare every pin and external capacitor connection rather than relying on the SOIC footprint alone.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The available product information identifies the commercial-grade MAX232DWRG4 but does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. EIA-232-F, TIA-232-F, and V.28 are interface standards rather than environmental-compliance certifications.

Pencarian Terkait

MAX232DWRG4 datasheet MAX232DWRG4 pinout MAX232DWRG4 datasheet pdf MAX232DWRG4 equivalent MAX232DWRG4 replacement MAX232DWRG4 cross reference MAX232DWRG4 vs ST232BDR MAX232DWRG4 footprint MAX232DWRG4 application circuit Texas Instruments MAX232DWRG4 MAX232DWRG4 price MAX232DWRG4 stock

Komponen dan Istilah Terkait

Texas Instruments MAX232DWRG4 MAX232DWR MAX232DWE4 MAX232CWE4 MAX232AWE4 ST232BDR STMicroelectronics RS-232 transceiver line driver line receiver interface IC semiconductor EIA-232-F TIA-232-F V.28 TTL CMOS charge-pump capacitor ESD protection 16-pin SOIC SOIC package family surface-mount package industrial control data acquisition
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ