MAX232DWRG4 - Dual 120kbps RS-232 | Texas Instruments
MPN: MAX232DWRG4 ✓ 啟用中MAX232DWRG4 概覽
An RS-232 transceiver is an interface IC that translates low-voltage digital logic levels into the positive and negative voltage levels used by RS-232 equipment. Within the interface hierarchy, it belongs to the line-driver and line-receiver family, provides physical-layer signal conditioning, and bridges a host controller or UART with an external data port.
Key features include a single 5 V supply, operation up to 120 kbps, ±9 V driver output levels, and ±2 kV ESD protection. The integrated dual-driver and dual-receiver configuration supports two communication channels in one package. Its commercial-grade operating range is 0°C to 70°C, making it appropriate for room-temperature industrial, instrumentation, and embedded-control systems.
The MAX232DWRG4 uses charge-pump circuitry to generate the bipolar voltage levels required by RS-232 from one 5 V supply. Its receiver converts incoming EIA-232-F signals into TTL/CMOS-compatible levels, while its driver converts outgoing logic levels into RS-232 signals. The interface conforms to EIA-232-F, TIA-232-F, and V.28 requirements identified for this device.
Typical uses include industrial control panels, serial test equipment, data acquisition systems, point-of-sale terminals, and embedded RS-232 ports. Its 120 kbps capability is suitable for moderate-speed point-to-point links, although modern high-speed or long-distance designs may require a more suitable RS-232 transceiver family.
PCB implementation should follow the manufacturer pin-description and capacitor-connection diagrams. Place charge-pump capacitors close to their specified pins, keep RS-232 routing away from sensitive analog and high-speed clock traces, and provide suitable logic-side ground return paths. The external RS-232 connector may also require additional transient-protection measures for exposed cables.
This page combines the manufacturer’s principal electrical ratings with package details, interface standards, replacement guidance, and practical layout considerations. It is intended to help engineers evaluate the MAX232DWRG4 for 5 V RS-232 designs and identify compatible second-source options without changing the 16-pin SOIC footprint.
直接替換替代品,適用於 MAX232DWRG4 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: MAX232DWRG4 (相同外形與佔位) — 差異在於 Maximum Data Rate, Product Type.
MAX232DWR
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →MAX232DWE4
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →MAX232CWE4
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
MAX232AWE4
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
ST232BDR
✅ 直接替換📋 參考替代品(不在目錄中)
MAX232DWRG4 規格
| Product Type | Dual RS-232 line transceiver |
| Number of Drivers | 2 |
| Number of Receivers | 2 |
| 供應電壓 | 5 V |
| Maximum Data Rate | 120 kbps |
| Driver Output Level | ±9 V |
| ESD Protection | ±2 kV |
| Interface Standards | EIA-232-F, TIA-232-F, V.28 |
| 封裝 | 16-pin SOIC |
| Terminal Count | 16 |
| Temperature Grade | Commercial |
| 工作溫度 | 0°C to 70°C |
| Peak Reflow Temperature | 260°C |
| 安裝類型 | Surface mount |
| Lead Form | Gull wing |
| Package Code | SOP |
| Package Shape | Rectangular |
MAX232DWRG4 腳位配置
| 腳位 1 | R1OUT — Receiver 1 output |
| 腳位 2 | R2OUT — Receiver 2 output |
| 腳位 3 | R2IN — Receiver 2 input |
| 腳位 4 | R1IN — Receiver 1 input |
| 腳位 5 | GND — Ground |
| 腳位 6 | V+ — Positive supply voltage |
| 腳位 7 | R1IN — Receiver 1 input |
| 腳位 8 | R2IN — Receiver 2 input |
| 腳位 9 | R2OUT — Receiver 2 output |
| 腳位 10 | R1OUT — Receiver 1 output |
| 腳位 11 | T1IN — Driver 1 input |
| 腳位 12 | T2IN — Driver 2 input |
| 腳位 13 | T2OUT — Driver 2 output |
| 腳位 14 | T1OUT — Driver 1 output |
| 腳位 15 | C2 — Charge-pump capacitor connection |
| 腳位 16 | C1 — Charge-pump capacitor connection |
典型應用
MAX232DWRG4 適用於 6 應用s: Industrial Control Panels, Data Acquisition Systems, Embedded Serial Port Expansion, Instrumentation and Test Equipment, Point-of-Sale Terminals, Communication and Networking Equipment.
Industrial Control Panels
The MAX232DWRG4 fits industrial control panels that connect a 5 V controller to an RS-232 service port, programming interface, or external instrument. Its two transmitters and two receivers provide two channels in one 16-pin SOIC, while the 120 kbps maximum rate is appropriate for configuration links, command traffic, and moderate data transfers. The commercial 0°C to 70°C range suits controlled indoor equipment. Designers should isolate the RS-232 traces from motors and switching nodes, use the manufacturer-specified charge-pump capacitor connections, and assess whether a protected connector or additional transient suppressor is needed for field-wired cables.
推薦
Data Acquisition Systems
The MAX232DWRG4 is useful in laboratory and industrial data-acquisition equipment that must exchange commands and sampled data with a host computer over RS-232. The 120 kbps rate supports low- and moderate-speed acquisition channels, while the dual-channel architecture can connect separate command and data paths. Its single 5 V supply simplifies interfacing with TTL/CMOS logic. For reliable operation, keep the interface connector and cable routing away from high-gain analog inputs, provide a low-impedance return path, and verify the receiver thresholds and line capacitance under the actual cable length and baud-rate conditions.
推薦
Embedded Serial Port Expansion
The MAX232DWRG4 allows a modern embedded controller with a limited number of UART channels to connect two RS-232 ports to legacy equipment. Its 120 kbps capability suits configuration, monitoring, and short message-transfer tasks rather than high-throughput continuous streaming. The compact 16-pin SOIC simplifies routing on a mixed-signal embedded board, while the integrated dual-driver and dual-receiver arrangement reduces the number of separate interface devices. Firmware and hardware designers should expose separate enable or multiplexing controls where required, verify logic levels, and test the complete link for startup transients and cable-induced noise.
推薦
Instrumentation and Test Equipment
The MAX232DWRG4 is appropriate for test and measurement instruments that expose a PC-compatible RS-232 port for commands, calibration data, or diagnostic output. A 5 V supply, 120 kbps throughput, and two full-duplex channels allow one port for control traffic and another for status or measurement data. The 16-pin SOIC package is convenient for compact instruments, but analog and high-impedance measurement sections require careful isolation from digital return currents. Use a solid ground strategy, minimize connector-to-IC routing, and verify transient protection because bench instruments can be connected to user-controlled external cables.
推薦
Point-of-Sale Terminals
The MAX232DWRG4 can support legacy point-of-sale peripherals that exchange serial commands through an EIA/TIA-232 connection. Its two transmitters and receivers allow separate communication paths, while the 5 V operation and 120 kbps rate are compatible with many service ports and older transaction peripherals. The commercial temperature range suits indoor terminals. System integrators should account for electrostatic discharge at the user-accessible connector, preserve common-mode margin across grounded and ungrounded equipment, and select cable length and baud rate using a practical RS-232 margin assessment rather than treating the 120 kbps rating as a guaranteed distance.
推薦
Communication and Networking Equipment
The MAX232DWRG4 can bridge a 5 V communications controller to an RS-232 management port in routers, switches, and industrial communication equipment. The 120 kbps rate is suitable for configuration, diagnostics, and legacy management traffic, and the dual-channel configuration can support separate command and status links. Place the transceiver near the connector when practical, maintain a continuous signal-ground reference, and keep the RS-232 traces away from Ethernet magnetics, high-speed processors, and switching power stages. For network products, validate the design against the system’s grounding model, surge requirements, and enclosure-level ESD test plan.
推薦
推薦產品摘要
工程參考資料,適用於 MAX232DWRG4 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MAX232DWR | MAX232DWE4 | MAX232CWE4 | MAX232AWE4 | ST232BDR |
|---|---|---|---|---|---|---|
| Package | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | STMicroelectronics |
| Product Type | Dual RS-232 transceiver | Dual RS-232 transceiver | Dual RS-232 transceiver | Dual RS-232 transceiver | Dual RS-232 transceiver | Two-driver and two-receiver RS-232 interface |
| Number of Drivers | 2 | 2 | 2 | 2 | 2 | 2 |
| Number of Receivers | 2 | 2 | 2 | 2 | 2 | 2 |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
主要差異化特點
- Documented high-speed RS-232 capability (對比ST232BDR)
- Published interface protection level (對比ST232BDR)
- Single-supply bipolar RS-232 operation (對比MAX232AWE4)
- Two-channel integration in a 16-pin SOIC (對比MAX232DWE4)
設計說明
Place the charge-pump capacitors at the pins designated C1 and C2 and keep their connections short. Route the two RS-232 driver outputs and receiver inputs directly toward the connector while maintaining separation from precision analog inputs and high-speed digital traces. The SOIC ground lead must connect to a low-impedance plane, and the logic and RS-232 return paths should not share narrow necks.
Keep the MAX232DWRG4 away from switching-regulator inductors, relay coils, motor traces, and high di/dt power paths. A solid ground plane and short charge-pump capacitor connections reduce radiated and conducted coupling. If the RS-232 connector is externally accessible, evaluate a dedicated transient-protection network at the connector because the device’s ±2 kV ESD rating does not automatically cover larger system-level surge events.
Do not treat the 120 kbps rating as a guaranteed cable distance or a guarantee that every receiver threshold will operate with the system’s ground reference. Confirm capacitor values, baud rate, cable capacitance, grounding, and logic levels against the manufacturer application guidance. When substituting another 16-pin device, compare every pin and external capacitor connection rather than relying on the SOIC footprint alone.
合規資訊
The available product information identifies the commercial-grade MAX232DWRG4 but does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. EIA-232-F, TIA-232-F, and V.28 are interface standards rather than environmental-compliance certifications.