Analog Devices

MAX232EEWE+ 120kbps RS-232 Transceiver | Analog Devices

MPN: MAX232EEWE+ ✓ Aktif
+5 V Vdss 16-pin wide SOIC Package
MOQ: 1 |

MAX232EEWE+ Ringkasan

The Analog Devices MAX232EEWE+ is a dual driver and dual receiver RS-232 transceiver designed for +5 V operation, with one transmitter and one receiver channel. It supports data rates up to 120 kbps and is packaged in a 16-pin wide SOIC. The MAX232EEWE+ also includes an on-chip charge-pump voltage generator for converting the single +5 V supply into the bipolar voltage levels required by RS-232 drivers.

An RS-232 transceiver is an interface IC that connects logic-level equipment to a serial port using the EIA/TIA-232E electrical standard. Each receiver translates a bipolar RS-232 signal into a TTL or CMOS logic level, while each driver converts a logic-level signal into the bipolar voltage required at the RS-232 port. This interface belongs to the broader hierarchy of transceiver IC, interface IC, and communication semiconductor.

The MAX232EEWE+ meets EIA/TIA-232E and CCITT V.28 specifications according to the Analog Devices product page. Its two-driver, two-receiver arrangement supports equipment with two serial channels while keeping the external interface compact. Operation from a single +5 V supply simplifies system design because the charge pump generates the required positive and negative transmitter voltages internally. The wide SOIC package is also available in a 16-pin surface-mount form.

At the circuit level, the device combines two RS-232 drivers, two RS-232 receivers, and a charge-pump voltage converter. The charge-pump section requires external storage capacitors, allowing the transmitter section to generate the positive and negative rail voltages needed for compliant RS-232 output levels. Receiver inputs accept bipolar RS-232 signals and produce digital logic outputs suitable for the host controller or peripheral.

Typical uses include industrial serial adapters, data-acquisition equipment, instrument-control panels, embedded serial ports, and communication links between a logic board and a legacy RS-232 peripheral. The 120 kbps operating capability supports moderate-speed point-to-point links, while the dual-channel organization can serve two ports or provide transmit and receive paths for more than one interface.

PCB layout is critical because charge-pump capacitors must be connected close to their designated pins, and RS-232 driver outputs should be routed away from sensitive receiver and logic traces. Protection networks may be added at exposed connectors, but they must not distort signal timing or prevent the driver from meeting its specified output levels.

This page combines the device architecture, verified operating specifications, package details, application guidance, and form-fit-function alternatives to support faster design review and sourcing. It also distinguishes true pin-compatible alternatives from functional equivalents that require circuit or package changes.

Alternatif penggantian untuk MAX232EEWE+ — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian MAX232EEWE+ (sama faktor bentuk dan footprint) — berbeda di dalam Product Type, Maximum Data Rate, Package, Receiver Output Type, Transmitter Output Type.

Texas Instruments
Product Type: Dual RS-232 driver/receiver
Maximum Data Rate: 250 kbps
Package: 16-pin SOIC (DW), 0.295 inch / 7.50 mm width
Bandingkan dengan MAX232EEWE+ →
Maxim Integrated
Product Type: Dual RS-232 line driver and receiver transceiver
Bandingkan dengan MAX232EEWE+ →

MAX232AEWE

✅ Drop-In
📦 16-SOIC
Same 16-pin wide SOIC RS-232 footprint and dual-driver, dual-receiver arrangement; operating electrical limits must be confirmed against the manufacturer ordering table.

📋 Alternatif referensi (tidak dalam katalog)

MAX232ECWE+

✅ Drop-In
Maxim Integrated
📦 16-SOIC
2 drivers and 2 receivers · Full duplex · RS-232 and V.28 · 120 kbps · 4.5 V to 5.5 V · +5 V · ±15 kV · Integrated

Kontak untuk harga

Lihat Datasheet →

MAX232ECDWR

✅ Drop-In
Texas Instruments
📦 16-SOIC
Dual RS-232 driver/receiver · 2 · 2 · 250 kbps · 4.5 V to 5.5 V · Single 5 V supply · IEC 61000-4-2 · 16-pin SOIC (DW), 0.295 inch / 7.50 mm width

Kontak untuk harga

Lihat Datasheet →

MAX232ESE+

✅ Drop-In
Maxim Integrated
📦 16-SOIC
Dual RS-232 line driver and receiver transceiver · 2 channels · 2 channels · 4.5 V to 5.5 V · 120 kbps · EIA/TIA-232E · CCITT V.28 · V.24

Kontak untuk harga

Lihat Datasheet →

HIN232IBZ

✅ Drop-In
📦 16-SOIC
Cross-brand +5 V dual-driver, dual-receiver RS-232 interface with an onboard charge pump; pin functions and external capacitor requirements must be checked before substitution.

📋 Alternatif referensi (tidak dalam katalog)

MAX232EEWE+ Spesifikasi

Product Type Dual RS-232 driver/receiver transceiver
Number of Drivers 2
Number of Receivers 2
Tegangan Pemuat +5 V
Maximum Data Rate 120 kbps
RS-232 Standard EIA/TIA-232E
ITU Standard CCITT V.28
Paket 16-pin wide SOIC
Tipe Mounting Surface mount
Transmitter Output Type RS-232 bipolar line output
Receiver Output Type TTL/CMOS logic output
Voltage Generation On-chip charge-pump voltage generator

MAX232EEWE+ 16-pin wide soic Diamant Konfigurasi Panduan

Konfigurasi pin untuk MAX232EEWE+ (16-pin wide soic pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.

Diamant diagram pakai pakai 16-pin wide soic untuk MAX232EEWE+

Tidak ada data diatribut pin yang tersedia untuk MAX232EEWE+.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

MAX232EEWE+ cocok untuk 6 aplikasis: Industrial Serial Port Interface, Data Acquisition Equipment, Instrument Control Panels, Embedded System Serial Bridge, Serial Adapter and Dongle, Network Equipment Management Port.

🏭

Industrial Serial Port Interface

The MAX232EEWE+ fits an industrial controller that needs to communicate with a legacy RS-232 peripheral over a single +5 V rail. Its two drivers and two receivers can serve two serial channels, while the 120 kbps maximum data rate is suitable for configuration links, instrument commands, and moderate-rate telemetry. Place the charge-pump capacitors close to their designated pins and route each driver output directly toward its connector. The dual-channel organization reduces the number of interface ICs when both transmit and receive paths are required for more than one port.

⚡

Data Acquisition Equipment

The MAX232EEWE+ is useful in laboratory and industrial data-acquisition equipment that must exchange commands and measurements with a host computer. A receiver converts the bipolar RS-232 signal to TTL or CMOS logic for the controller, while a driver sends commands toward the remote terminal. The supported rate of up to 120 kbps is more than adequate for many legacy serial-control protocols. Keep the RS-232 traces away from analog input paths and place optional connector protection at the board edge to limit external surge exposure.

🔧

Instrument Control Panels

The MAX232EEWE+ can connect a digital control board to test and measurement equipment that retains an RS-232 command interface. Its two transmitters and two receivers provide flexible point-to-point connectivity, and the +5 V operating requirement simplifies integration with contemporary control logic. Because the charge-pump supply is internal, no external negative rail is required. Nevertheless, maintain the prescribed capacitor placement and provide chassis grounding or isolation according to the equipment's surge and grounding requirements.

🧩

Embedded System Serial Bridge

The MAX232EEWE+ bridges a modern embedded controller's logic-level serial signals with a legacy RS-232 port. The controller can transmit commands through one driver and receive responses through one receiver, with the second pair available for another channel or handshake-oriented interface. The 120 kbps capability supports many embedded protocols, although actual throughput depends on framing and protocol overhead. Decouple the +5 V supply locally and keep the noisy charge-pump and driver current paths separated from sensitive MCU supply traces.

📱

Serial Adapter and Dongle

The MAX232EEWE+ is appropriate for compact serial adapters, service dongles, and configuration cables that translate USB or processor logic to RS-232. A 16-pin wide SOIC footprint preserves board area while providing two driver and two receiver channels. The integrated charge pump removes the need for a discrete negative-voltage supply, reducing component count. Engineers should still verify connector pinout, cable-length limits, logic levels, and protection requirements because those system-level constraints are not determined by the transceiver alone.

🌐

Network Equipment Management Port

The MAX232EEWE+ can provide an RS-232 management path in network or communications equipment where an out-of-band console remains required. The dual-channel arrangement can support separate command and diagnostic paths, while the 120 kbps rate is appropriate for console traffic. The internal charge pump allows operation from a single +5 V rail, which is useful in compact line-card designs. Place driver-return and receiver traces away from high-current switching nodes, and follow the connector's isolation strategy to avoid ground-loop problems.

What is the MAX232EEWE+?
The MAX232EEWE+ is a +5 V, dual-driver and dual-receiver RS-232 transceiver in a 16-pin wide SOIC package. According to the Analog Devices MAX232E product page, its drivers and receivers meet EIA/TIA-232E and CCITT V.28 specifications at data rates up to 120 kbps. The device converts between RS-232 bipolar signals and TTL/CMOS logic levels and includes an on-chip charge-pump voltage generator.
What are the key specifications of MAX232EEWE+ that engineers should know?
The MAX232EEWE+ provides two RS-232 drivers, two RS-232 receivers, one +5 V supply, and operation up to 120 kbps in a 16-pin wide SOIC. According to the Analog Devices MAX232E product page, the interface meets EIA/TIA-232E and CCITT V.28 requirements. Its on-chip charge-pump circuit generates the bipolar transmitter voltages, while separate logic-side inputs and outputs support connection to a host controller.
Where can I download the MAX232EEWE+ datasheet PDF?
The authoritative MAX232EEWE+ documentation is available through the Analog Devices MAX232E product page and the linked manufacturer data. The product page identifies the MAX232EEWE as a +5 V-powered, multichannel RS-232 driver and receiver family. Engineers should use the MAX232E datasheet pin description, electrical characteristics, charge-pump capacitor table, and package drawings when creating a PCB.
Where can I find the MAX232EEWE+ pinout?
Use the MAX232E manufacturer datasheet for the exact MAX232EEWE+ pin description and package drawing. The device uses a 16-pin wide SOIC with power, ground, driver outputs, driver inputs, receiver inputs, and receiver outputs assigned to specific pins. The pin-description table should be followed directly when assigning PCB nets, especially for the charge-pump capacitor connections and driver outputs.
Can MAX232EEWE+ replace a dual RS-232 interface in an existing design?
The MAX232EEWE+ can replace a compatible dual RS-232 interface only when the replacement has the same 16-pin wide SOIC footprint, equivalent pin functions, +5 V supply, and suitable operating specifications. The MAX232E family includes closely related variants, but each ordering code must be checked against the manufacturer pin table. Board-level compatibility also depends on the charge-pump capacitor values and external protection network.
What can replace MAX232EEWE+?
A direct replacement for MAX232EEWE+ must be a pin-compatible dual RS-232 transceiver in the same 16-pin wide SOIC footprint. The MAX232AEWE and MAX232ECWE+ are same-family options identified in RS-232 cross-reference information, while HIN232-series devices may provide an alternative function. Verify the manufacturer pin table, supply voltage, charge-pump capacitor requirements, and maximum data rate before approving any substitution.
Is MAX232EEWE+ the same as MAX232EWE?
The MAX232EEWE+ and MAX232EWE identify closely related ordering variants of the MAX232E family, but the final suffix must be checked against the manufacturer ordering table. Both are associated with a 16-pin SOIC RS-232 interface. Procurement or design qualification should confirm whether the added plus sign changes temperature grade, packing, or another orderable attribute for the exact manufacturer catalog entry.
MAX232EEWE+ vs MAX232AEWE+ - which is better for an industrial interface?
MAX232EEWE+ and MAX232AEWE+ are both members of the MAX232E interface family and can be suitable for conventional +5 V RS-232 links, but the correct selection depends on their published electrical differences. The MAX232E family supports up to 120 kbps and EIA/TIA-232E and CCITT V.28 operation. Compare the exact ordering code in the manufacturer data, especially temperature range, supply requirements, and charge-pump implementation, before deciding.
When should I choose MAX232EEWE+ over another RS-232 transceiver?
Choose MAX232EEWE+ when a new design needs two RS-232 channels, a single +5 V supply, operation up to 120 kbps, and a 16-pin wide SOIC footprint. It is particularly suitable when existing board space is based on the MAX232E pin arrangement and the external charge-pump capacitors can follow the manufacturer guidance. A different transceiver is preferable if the system requires another package, supply voltage, channel count, isolation, or data rate.
Is MAX232EEWE+ suitable for industrial serial communication?
The MAX232EEWE+ is suitable for many industrial serial interfaces operating at up to 120 kbps with a +5 V supply. Its two drivers and two receivers support multiple RS-232 paths, while the charge-pump topology eliminates the need for a separate negative supply. Industrial suitability still depends on the required temperature grade, transient protection, isolation, connector requirements, and electromagnetic-compatibility validation of the finished equipment.
How fast is MAX232EEWE+ RS-232 data communication?
The MAX232EEWE+ supports RS-232 data rates up to 120 kbps when loaded, according to the Analog Devices MAX232E product page. The same specification applies across the listed MAX232E family devices that meet EIA/TIA-232E and CCITT V.28. Actual throughput also depends on cable length, transmitter loading, receiver threshold behavior, protocol overhead, and the performance of the connected equipment.
Does MAX232EEWE+ need external charge-pump capacitors?
The MAX232EEWE+ uses an internal charge-pump voltage generator to create the bipolar voltages required by the RS-232 drivers, but its charge-pump network still requires external capacitors. Use the exact capacitor values, polarity, tolerance, and PCB placement shown in the MAX232E manufacturer data. Incorrect capacitance can impair startup, output voltage, or electromagnetic-emissions performance even when the logic interface appears to operate normally.
What is the MAX232EEWE+ lead time and is it in stock?
Current inventory and lead time should be confirmed through the Request a Quote form on this page. Stock status can change quickly, so engineers should state the required quantity, package, and target date when requesting a quotation. The manufacturer product page identifies MAX232E family availability, while production planning also depends on the exact MAX232EEWE+ ordering code and packaging requirements.
Where can I buy MAX232EEWE+ online?
Use the Request a Quote form on this page to request the MAX232EEWE+ with your required quantity and delivery schedule. The form provides the appropriate sourcing channel without embedding a temporary commercial figure that may quickly become outdated. Include the 16-pin wide SOIC package and any grade, reel, or inspection requirements in the request to obtain an accurate quotation and schedule.
What is the price of MAX232EEWE+?
The current commercial terms for MAX232EEWE+ are available through the Request a Quote form on this page. Provide the required quantity, package configuration, destination, and target schedule so the quotation reflects current component availability. Avoid designing to a historical catalog figure because pricing and lifecycle conditions can change without changing the electrical specification of the device.
What is the best cross-brand equivalent for MAX232EEWE+?
The best cross-brand equivalent for MAX232EEWE+ is the device that combines the same 16-pin wide SOIC pinout, +5 V operation, two-driver and two-receiver arrangement, and adequate RS-232 performance. A HIN232-series part can provide a functional alternative, but a final drop-in decision requires a direct pin-by-pin comparison and confirmation of the external capacitor network. Do not treat every similarly described RS-232 transceiver as form-fit-function compatible.

Data referensi engineering untuk MAX232EEWE+ — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the MAX232EEWE+ when the board needs two conventional RS-232 channels, a single +5 V supply, and a 16-pin wide SOIC footprint with operation up to 120 kbps. It is a strong fit for legacy industrial controllers, data-acquisition equipment, instrument panels, and serial adapters. Select MAX232ECWE+ when its documented ESD-protection feature is important, and select MAX232AEWE when that exact ordering code matches the required electrical and temperature specifications. Consider HIN232IBZ as a cross-brand option only after confirming the pin table and external capacitor network. None of these choices should be made from package appearance alone: validate power pins, charge-pump connections, receiver thresholds, driver outputs, temperature grade, and connector protection before releasing a replacement to production.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini MAX232AEWE MAX232ECWE+ MAX232ECDWR MAX232ESE HIN232IBZ
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Intersil
Product Type Dual RS-232 transceiver Dual RS-232 transceiver Dual RS-232 transceiver Dual RS-232 transceiver Dual RS-232 transceiver Dual RS-232 transceiver
Number of Drivers 2 2 2 2 2 2
Number of Receivers 2 2 2 2 2 2
Supply Voltage +5 V +5 V +5 V +5 V +5 V +5 V
RS-232 Compliance EIA/TIA-232E and CCITT V.28 RS-232 interface RS-232 interface RS-232 interface RS-232 interface EIA RS-232E and V.28
Voltage Conversion On-chip charge-pump voltage generator On-chip charge-pump voltage generator On-chip charge-pump voltage generator On-chip charge-pump voltage generator On-chip charge-pump voltage generator Onboard charge-pump voltage converter

Diferensiator Kunci

  • Dual-channel RS-232 integration in a 16-pin package (vsMAX232AEWE)
  • Integrated charge-pump generation from one +5 V supply (vsHIN232IBZ)
  • 120 kbps operation with EIA/TIA-232E and CCITT V.28 support (vsMAX232ECDWR)

Catatan Desain

Place the charge-pump capacitors directly between their designated IC pins with minimal trace length. Keep the high-current charge-pump loop compact and connect the device ground directly into the surrounding ground plane. Long capacitor traces increase loop area and may intensify conducted and radiated emissions. Follow the MAX232E manufacturer application circuit for capacitor capacitance, voltage rating, polarity, and placement.

Route the two RS-232 driver outputs directly toward their connector pins and keep them away from receiver inputs, crystal circuits, analog signal paths, and sensitive logic nets. Do not place long traces beneath the transceiver or between its ground and supply pins. If the connector is exposed to user cables, place protection and chassis-grounding components near the connector rather than beside the IC.

Decouple the +5 V supply at the MAX232EEWE+ with local high-frequency and bulk capacitance selected from the manufacturer reference circuit. The charge-pump and driver sections can produce transient current when changing line state, so the supply path must remain low-impedance between the regulator and transceiver. Validate droop and transient response at the actual cable load, and avoid sharing an unbuffered supply path with switching converters.

Do not assume that two ICs with the same 16-pin count are interchangeable. Confirm every receiver input, driver input, driver output, power pin, ground pin, and charge-pump capacitor connection against the exact alternative's pin description. Also verify suffix-specific temperature, ESD, and lifecycle information. A pin-compatible package alone does not prove equivalent behavior or protection performance.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The MAX232E is a general-purpose RS-232 interface IC rather than an automotive-qualified product. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals statements were not established for the exact ordering code.

Pencarian Terkait

MAX232EEWE+ datasheet MAX232EEWE+ pinout MAX232EEWE+ datasheet pdf MAX232EEWE+ equivalent MAX232EEWE+ replacement MAX232EEWE+ cross reference MAX232EEWE+ price MAX232EEWE+ stock Analog Devices MAX232EEWE+ MAX232EEWE+ 16-SOIC pinout MAX232EEWE+ RS-232 application circuit MAX232EEWE+ vs MAX232AEWE

Komponen dan Istilah Terkait

Analog Devices Maxim Integrated MAX232EEWE+ MAX232E MAX232AEWE MAX232ECWE+ MAX232ECDWR MAX232ESE HIN232IBZ RS-232 transceiver dual RS-232 driver and receiver interface IC communication semiconductor EIA/TIA-232E CCITT V.28 charge-pump voltage generator 16-pin wide SOIC SOIC family surface-mount package TTL logic level CMOS logic level 120 kbps RS-232 driver RS-232 receiver industrial serial communication
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ