MAX232EEWE+ 120kbps RS-232 Transceiver | Analog Devices
部品番号: MAX232EEWE+ ✓ 生産中MAX232EEWE+ 概要
An RS-232 transceiver is an interface IC that connects logic-level equipment to a serial port using the EIA/TIA-232E electrical standard. Each receiver translates a bipolar RS-232 signal into a TTL or CMOS logic level, while each driver converts a logic-level signal into the bipolar voltage required at the RS-232 port. This interface belongs to the broader hierarchy of transceiver IC, interface IC, and communication semiconductor.
The MAX232EEWE+ meets EIA/TIA-232E and CCITT V.28 specifications according to the Analog Devices product page. Its two-driver, two-receiver arrangement supports equipment with two serial channels while keeping the external interface compact. Operation from a single +5 V supply simplifies system design because the charge pump generates the required positive and negative transmitter voltages internally. The wide SOIC package is also available in a 16-pin surface-mount form.
At the circuit level, the device combines two RS-232 drivers, two RS-232 receivers, and a charge-pump voltage converter. The charge-pump section requires external storage capacitors, allowing the transmitter section to generate the positive and negative rail voltages needed for compliant RS-232 output levels. Receiver inputs accept bipolar RS-232 signals and produce digital logic outputs suitable for the host controller or peripheral.
Typical uses include industrial serial adapters, data-acquisition equipment, instrument-control panels, embedded serial ports, and communication links between a logic board and a legacy RS-232 peripheral. The 120 kbps operating capability supports moderate-speed point-to-point links, while the dual-channel organization can serve two ports or provide transmit and receive paths for more than one interface.
PCB layout is critical because charge-pump capacitors must be connected close to their designated pins, and RS-232 driver outputs should be routed away from sensitive receiver and logic traces. Protection networks may be added at exposed connectors, but they must not distort signal timing or prevent the driver from meeting its specified output levels.
This page combines the device architecture, verified operating specifications, package details, application guidance, and form-fit-function alternatives to support faster design review and sourcing. It also distinguishes true pin-compatible alternatives from functional equivalents that require circuit or package changes.
ドロップイン代替品: MAX232EEWE+ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MAX232EEWE+ (同一形状・フットプリント) — 相違点: Product Type, Maximum Data Rate, Package, Receiver Output Type, Transmitter Output Type.
MAX232AEWE
✅ ドロップイン📋 参考代替品(カタログ未掲載)
MAX232ECWE+
✅ ドロップイン価格はお問い合わせください
データシートを見る →MAX232ECDWR
✅ ドロップイン価格はお問い合わせください
データシートを見る →MAX232ESE+
✅ ドロップイン価格はお問い合わせください
データシートを見る →HIN232IBZ
✅ ドロップイン📋 参考代替品(カタログ未掲載)
MAX232EEWE+ 仕様
| Product Type | Dual RS-232 driver/receiver transceiver |
| Number of Drivers | 2 |
| Number of Receivers | 2 |
| 電源電圧 | +5 V |
| Maximum Data Rate | 120 kbps |
| RS-232 Standard | EIA/TIA-232E |
| ITU Standard | CCITT V.28 |
| パッケージ | 16-pin wide SOIC |
| 実装タイプ | Surface mount |
| Transmitter Output Type | RS-232 bipolar line output |
| Receiver Output Type | TTL/CMOS logic output |
| Voltage Generation | On-chip charge-pump voltage generator |
MAX232EEWE+ 16-pin wide soic ピン配置ガイド
MAX232EEWE+ (16-pin wide soic パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: MAX232EEWE+.
詳細は データシート をご参照ください。
主な用途
MAX232EEWE+ の用途: 6 件s: Industrial Serial Port Interface, Data Acquisition Equipment, Instrument Control Panels, Embedded System Serial Bridge, Serial Adapter and Dongle, Network Equipment Management Port.
Industrial Serial Port Interface
The MAX232EEWE+ fits an industrial controller that needs to communicate with a legacy RS-232 peripheral over a single +5 V rail. Its two drivers and two receivers can serve two serial channels, while the 120 kbps maximum data rate is suitable for configuration links, instrument commands, and moderate-rate telemetry. Place the charge-pump capacitors close to their designated pins and route each driver output directly toward its connector. The dual-channel organization reduces the number of interface ICs when both transmit and receive paths are required for more than one port.
おすすめ
Data Acquisition Equipment
The MAX232EEWE+ is useful in laboratory and industrial data-acquisition equipment that must exchange commands and measurements with a host computer. A receiver converts the bipolar RS-232 signal to TTL or CMOS logic for the controller, while a driver sends commands toward the remote terminal. The supported rate of up to 120 kbps is more than adequate for many legacy serial-control protocols. Keep the RS-232 traces away from analog input paths and place optional connector protection at the board edge to limit external surge exposure.
おすすめ
Instrument Control Panels
The MAX232EEWE+ can connect a digital control board to test and measurement equipment that retains an RS-232 command interface. Its two transmitters and two receivers provide flexible point-to-point connectivity, and the +5 V operating requirement simplifies integration with contemporary control logic. Because the charge-pump supply is internal, no external negative rail is required. Nevertheless, maintain the prescribed capacitor placement and provide chassis grounding or isolation according to the equipment's surge and grounding requirements.
おすすめ
Embedded System Serial Bridge
The MAX232EEWE+ bridges a modern embedded controller's logic-level serial signals with a legacy RS-232 port. The controller can transmit commands through one driver and receive responses through one receiver, with the second pair available for another channel or handshake-oriented interface. The 120 kbps capability supports many embedded protocols, although actual throughput depends on framing and protocol overhead. Decouple the +5 V supply locally and keep the noisy charge-pump and driver current paths separated from sensitive MCU supply traces.
おすすめ
Serial Adapter and Dongle
The MAX232EEWE+ is appropriate for compact serial adapters, service dongles, and configuration cables that translate USB or processor logic to RS-232. A 16-pin wide SOIC footprint preserves board area while providing two driver and two receiver channels. The integrated charge pump removes the need for a discrete negative-voltage supply, reducing component count. Engineers should still verify connector pinout, cable-length limits, logic levels, and protection requirements because those system-level constraints are not determined by the transceiver alone.
おすすめ
Network Equipment Management Port
The MAX232EEWE+ can provide an RS-232 management path in network or communications equipment where an out-of-band console remains required. The dual-channel arrangement can support separate command and diagnostic paths, while the 120 kbps rate is appropriate for console traffic. The internal charge pump allows operation from a single +5 V rail, which is useful in compact line-card designs. Place driver-return and receiver traces away from high-current switching nodes, and follow the connector's isolation strategy to avoid ground-loop problems.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MAX232EEWE+ — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MAX232AEWE | MAX232ECWE+ | MAX232ECDWR | MAX232ESE | HIN232IBZ |
|---|---|---|---|---|---|---|
| Package | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Intersil |
| Product Type | Dual RS-232 transceiver | Dual RS-232 transceiver | Dual RS-232 transceiver | Dual RS-232 transceiver | Dual RS-232 transceiver | Dual RS-232 transceiver |
| Number of Drivers | 2 | 2 | 2 | 2 | 2 | 2 |
| Number of Receivers | 2 | 2 | 2 | 2 | 2 | 2 |
| Supply Voltage | +5 V | +5 V | +5 V | +5 V | +5 V | +5 V |
| RS-232 Compliance | EIA/TIA-232E and CCITT V.28 | RS-232 interface | RS-232 interface | RS-232 interface | RS-232 interface | EIA RS-232E and V.28 |
| Voltage Conversion | On-chip charge-pump voltage generator | On-chip charge-pump voltage generator | On-chip charge-pump voltage generator | On-chip charge-pump voltage generator | On-chip charge-pump voltage generator | Onboard charge-pump voltage converter |
主な差別化要因
- Dual-channel RS-232 integration in a 16-pin package (vs MAX232AEWE)
- Integrated charge-pump generation from one +5 V supply (vs HIN232IBZ)
- 120 kbps operation with EIA/TIA-232E and CCITT V.28 support (vs MAX232ECDWR)
設計ノート
Place the charge-pump capacitors directly between their designated IC pins with minimal trace length. Keep the high-current charge-pump loop compact and connect the device ground directly into the surrounding ground plane. Long capacitor traces increase loop area and may intensify conducted and radiated emissions. Follow the MAX232E manufacturer application circuit for capacitor capacitance, voltage rating, polarity, and placement.
Route the two RS-232 driver outputs directly toward their connector pins and keep them away from receiver inputs, crystal circuits, analog signal paths, and sensitive logic nets. Do not place long traces beneath the transceiver or between its ground and supply pins. If the connector is exposed to user cables, place protection and chassis-grounding components near the connector rather than beside the IC.
Decouple the +5 V supply at the MAX232EEWE+ with local high-frequency and bulk capacitance selected from the manufacturer reference circuit. The charge-pump and driver sections can produce transient current when changing line state, so the supply path must remain low-impedance between the regulator and transceiver. Validate droop and transient response at the actual cable load, and avoid sharing an unbuffered supply path with switching converters.
Do not assume that two ICs with the same 16-pin count are interchangeable. Confirm every receiver input, driver input, driver output, power pin, ground pin, and charge-pump capacitor connection against the exact alternative's pin description. Also verify suffix-specific temperature, ESD, and lifecycle information. A pin-compatible package alone does not prove equivalent behavior or protection performance.
コンプライアンス情報
The MAX232E is a general-purpose RS-232 interface IC rather than an automotive-qualified product. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals statements were not established for the exact ordering code.