Maxim Integrated

MAX361ESE+ - 85 Ohm Quad SPST Analog Switch | Maxim Integrated

MPN: MAX361ESE+ ✓ Aktif
85 ohm maximum Rds(on) 16-SOIC Package
MOQ: 1 |

MAX361ESE+ Ringkasan

The Maxim Integrated MAX361ESE+ is a precision quad SPST analog switch with four normally closed channels, 85 ohm on resistance, and a 16-SOIC package. The device is designed for precision signal routing applications where four independent channels must switch between analog signals. Its 1:1 configuration, matched on-resistance behavior, and low-leakage design make it suitable for instrumentation, test systems, and signal-chain control.

An analog switch is an integrated semiconductor device that routes signals between circuit nodes under digital control. The MAX361ESE+ belongs to the analog switch and multiplexer category, where its normally closed SPST architecture connects each input to its corresponding output when the control state is inactive. The four channels provide convenient parallel routing without requiring four separate discrete switch packages.

The main electrical feature of the MAX361ESE+ is its maximum channel on resistance of 85 ohms. Maxim specifies that channel resistance is guaranteed to match within 3 ohms between channels and remain flat over the analog signal range, with a maximum variation of 9 ohms. This matching behavior is important in precision systems because unequal channel resistance can create gain errors, distortion, or inconsistent attenuation when different channels are selected.

The MAX361ESE+ is a single-pole single-throw device with four normally closed switches. Its control interface supports external digital control of the four signal paths, allowing an instrument, measurement system, or controller to select a signal route while minimizing external discrete components. The device is also specified for low leakage, which helps preserve the integrity of high-impedance measurement nodes when switches are open.

Typical applications include precision instrumentation, automated test equipment, multiplexed sensor interfaces, signal patching, sample-and-hold systems, and laboratory measurement setups. In these systems, the four matched channels can route several sensor or reference signals into a common measurement chain while reducing insertion-resistance variation between channels.

The principal design consideration is signal integrity. Traces connected to the analog pins should be kept short, and the switch should be placed close to the source and destination circuitry when possible. Power-supply bypassing and grounding are important in high-impedance systems because parasitic capacitance and leakage can degrade the measured signal even when the nominal on-resistance is well controlled.

This page combines the manufacturer product information, verified distributor listings, package details, comparison data, and practical routing guidance for engineers evaluating the MAX361ESE+ in precision analog-switch designs.

Alternatif penggantian untuk MAX361ESE+ — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian MAX361ESE+ (sama faktor bentuk dan footprint) — berbeda di dalam Number of Switches, On Resistance, On-Resistance Matching Between Channels, On-Resistance Variation Over Analog Signal Range, Package.

Analog Devices
Number of Switches: 4 circuits
On Resistance: <85 ohm
On-Resistance Matching Between Channels: <=3 ohm
Bandingkan dengan MAX361ESE+ →

MAX361ESE

✅ Drop-In
📦 16-SOIC
Same MAX361 family and 16-SOIC package; ordering qualification differs, while the listed core configuration remains four 1:1 SPST channels with 85-ohm maximum on resistance.

📋 Alternatif referensi (tidak dalam katalog)

MAX361CSE+

✅ Drop-In
Analog Devices
📦 16-SOIC
4 circuits · Single-pole single-throw (SPST) · Normally closed (NC) · <85 ohm · <=3 ohm · <=9 ohm · 4 inputs · 16-SOIC, 3.90 mm body width

Kontak untuk harga

Lihat Datasheet →

MAX353CSE+

✅ Drop-In
📦 16-SOIC
Verified as a pin-compatible replacement candidate in the same 16-SOIC footprint, but its electrical characteristics must be checked against the MAX361 85-ohm on-resistance and leakage requirements.

📋 Alternatif referensi (tidak dalam katalog)

MAX361ESE+ Rating Maksimal & Karakteristik Listrik

Number of Switches 4
Configuration 1:1
Switch Type SPST, normally closed
On Resistance 85 ohm maximum
On-Resistance Matching Between Channels 3 ohm maximum
On-Resistance Variation Over Analog Signal Range 9 ohm maximum
On-Resistance Flatness Flat over the analog signal range
Paket 16-SOIC
Package Pin Count 16 pins
Tipe Mounting Surface mount
Status RoHS unknown
AEC-Q100 Qualification not_applicable
Manufacturer Product Family MAX361 precision quad SPST analog switches

MAX361ESE+ 16 pins Diamant Konfigurasi Panduan

Konfigurasi pin untuk MAX361ESE+ (16 pins pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.

Diamant diagram pakai pakai 16 pins untuk MAX361ESE+

Tidak ada data diatribut pin yang tersedia untuk MAX361ESE+.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

MAX361ESE+ cocok untuk 6 aplikasis: Precision Test Equipment Signal Routing, Multiplexed Sensor Interfacing, High-Impedance Measurement Systems, Automated Signal Patching, Instrumentation Signal Selection, Laboratory Reference Distribution.

🧰

Precision Test Equipment Signal Routing

The MAX361ESE+ fits precision test-equipment routing because it provides four normally closed SPST channels with maximum on resistance of 85 ohms. The manufacturer specifies channel matching within 3 ohms and maximum resistance variation of 9 ohms over the analog signal range, helping preserve consistent attenuation as different test paths are selected. Place the switch close to the instrument input or source buffer, keep analog traces short, and provide local bypassing to minimize added insertion error and parasitic pickup. The four independent channels allow several fixtures or reference nodes to share a measurement path without requiring four discrete switch packages.

🌡️

Multiplexed Sensor Interfacing

The MAX361ESE+ is useful for multiplexing several sensor signals into a shared acquisition channel. Its four normally closed switches provide a defined default connection state, while the 85-ohm maximum on resistance and 3-ohm channel match limit path-dependent errors between sensors. For resistive sensors, calculate the maximum source impedance and acquisition time to ensure the added switch resistance does not impair settling. Keep high-impedance sensor nodes surrounded by grounded guarding where appropriate, and verify leakage requirements because switch off-state leakage can establish the measurement noise floor.

⚡

High-Impedance Measurement Systems

The MAX361ESE+ can serve as a controlled routing element in high-impedance measurement systems where consistent channel resistance and low leakage are important. The guaranteed 3-ohm maximum match between channels helps reduce channel-dependent error when a common amplifier or ADC measures different sources. The device should be placed close to the guarded input node, with short traces and clean power grounding to prevent leakage and capacitance from dominating the measurement. Confirm the complete leakage, bandwidth, and capacitance specifications against the required source impedance and settling-time budget before using it near picoamp-level front ends.

🔧

Automated Signal Patching

The MAX361ESE+ is appropriate for automated signal-patching systems that route several low- or moderate-impedance analog nodes into a common processing chain. Four SPST channels in one 16-SOIC package reduce board area compared with four separate single switches. The controlled 85-ohm maximum on resistance gives the system designer a defined insertion loss budget, while 3-ohm channel matching improves repeatability between routes. Use short traces from each source to its switch pin, avoid sharing high-resistance nodes where possible, and validate the complete control sequence during power-up to prevent unintended signal application.

📟

Instrumentation Signal Selection

The MAX361ESE+ supports instrumentation signal selection where multiple inputs must be presented to a shared buffer, amplifier, or converter. Its normally closed SPST topology provides a predictable default path, and its specified resistance matching makes channel-to-channel comparisons more repeatable than an unqualified general-purpose switch. The designer should still include the switch resistance in the source-loading calculation and assess the measurement settling time under the maximum source impedance. Grounding and bypass-pin placement are critical because long analog traces and shared supply return paths can introduce errors larger than the 3-ohm channel-match guarantee.

🧪

Laboratory Reference Distribution

The MAX361ESE+ can distribute a selected reference or calibration signal across several measurement channels. Matching within 3 ohms between channels is especially helpful when the same reference is compared across multiple paths, because it limits route-dependent amplitude differences. Keep the switch and source network close together, use a low-impedance reference driver when appropriate, and confirm the maximum signal voltage and supply conditions from the manufacturer datasheet. For precision calibration, characterize the actual insertion resistance and leakage in the final layout rather than relying only on the nominal 85-ohm maximum specification.

Ringkasan Produk Direkomendasikan

MAX361ESE Same-family MAX361 drop-in ordering candidate Digunakan di dalam: Precision Test Equipment Signal Routing, Multiplexed Sensor Interfacing, High-Impedance Measurement Systems, Automated Signal Patching, Instrumentation Signal Selection, Laboratory Reference Distribution MAX361CSE+ Analog Devices Digunakan di dalam: Precision Test Equipment Signal Routing, High-Impedance Measurement Systems, Instrumentation Signal Selection MAX353CSE+ Pin-compatible switching candidate Digunakan di dalam: Multiplexed Sensor Interfacing, Automated Signal Patching, Laboratory Reference Distribution
What is the MAX361ESE+ used for?
The MAX361ESE+ is a precision quad SPST analog switch used to route four analog signals under digital control. According to the Analog Devices MAX361 product page, the device contains four normally closed switches, supports a maximum on resistance of 85 ohms, and provides on-resistance matching within 3 ohms between channels. It is useful in instrumentation, test equipment, sensor multiplexing, signal patching, and high-impedance measurement circuits.
Is the MAX361ESE+ a normally open or normally closed switch?
The MAX361ESE+ is a normally closed, single-pole single-throw analog switch. The manufacturer identifies the MAX361 family as four normally closed switches, while the related MAX362 family uses normally open switches. Because the device is normally closed, each signal path is connected in its default state and changes state when the corresponding control input is driven. Confirm the control polarity in the device datasheet before assigning control logic.
What is the on resistance of the MAX361ESE+?
The MAX361ESE+ has a maximum channel on resistance of 85 ohms. The manufacturer also guarantees that the resistance match between channels is within 3 ohms and that the on resistance remains flat over the analog signal range, with maximum variation of 9 ohms. These specifications make the device more suitable for matched precision-routing applications than a general-purpose switch with wide channel-to-channel variation.
Where can I download the MAX361ESE+ datasheet?
The official MAX361 product page at Analog Devices provides the manufacturer documentation and product-selection information for the MAX361 family. The distributor listing for MAX361ESE+ identifies the device as a four-circuit, 1:1, 85-ohm SPST switch in a 16-SOIC package. Use the Analog Devices product page for the authoritative datasheet and ordering information, especially when confirming pin assignments, control thresholds, and operating limits.
Where can I find the MAX361ESE+ pinout?
The MAX361ESE+ pinout should be taken from the manufacturer MAX361 datasheet rather than inferred from the distributor package description. The verified listing confirms a 16-SOIC package and a four-channel SPST configuration, but it does not publish the individual pin names in a pin table. The package library uses a 16-pin SOIC footprint, while the complete pin-level mapping remains a datasheet-dependent design item.
What is the MAX361ESE+ replacement or equivalent?
The closest verified same-family choices are MAX361ESE and MAX361CSE+, both identified as drop-in-compatible MAX361-family devices in the available cross-reference information. MAX361ESE is the non-plus ordering form, while MAX361CSE+ is a temperature-range ordering variant with the same family architecture and package. MAX353CSE+ is also listed as a pin-compatible replacement candidate, but its electrical requirements should be checked against the original design before substitution.
Can MAX361CSE+ replace MAX361ESE+?
MAX361CSE+ can be considered a drop-in replacement candidate for MAX361ESE+ because the cross-reference information identifies both as MAX361-family quad SPST analog switches in narrow SOIC-16 packages with matching architectural characteristics. The MAX361 family uses four normally closed switches, and its production documentation identifies the MAX361 and MAX362 parts as precision quad SPST devices. Verify the exact control logic, supply requirements, temperature grade, and pinout before approving a substitution.
Can MAX353CSE+ replace MAX361ESE+?
MAX353CSE+ is a same-package replacement candidate for MAX361ESE+ according to the verified comparison information, which describes the MAX353CSE+ and MAX361ESE+ as fully replaceable with consistent terminals and packages. The devices are both listed in narrow SOIC-16 packages and use four-channel SPST configurations. However, engineers should compare on resistance, leakage, control levels, signal range, and temperature specifications in the manufacturer documentation before production use.
MAX361ESE+ vs MAX361CSE+ - which is the better choice?
MAX361ESE+ is the appropriate choice when the original design specifies the plus-qualified ordering variant, while MAX361CSE+ is the practical alternative when its temperature grade and electrical ratings satisfy the application. The MAX361CSE+ comparison identifies the same MAX361 series, four-channel SPST architecture, and narrow SOIC-16 package as MAX361ESE+. The deciding factors are ordering qualification, temperature range, availability, and manufacturer approval rather than a change in the basic switching function.
Is MAX361ESE+ suitable for precision instrumentation?
The MAX361ESE+ is suitable for precision instrumentation when low channel mismatch and controlled leakage are important. The manufacturer specifies maximum on resistance of 85 ohms, channel matching within 3 ohms, and maximum variation of 9 ohms over the analog signal range. Those characteristics help preserve consistent signal attenuation across selected channels. For very high-impedance or high-frequency paths, check the complete bandwidth, capacitance, leakage, and supply specifications before finalizing the design.
Where to buy MAX361ESE+ online?
The MAX361ESE+ can be requested through the Request a Quote form on this page, where the exact suffix, package, quantity, and delivery requirements should be stated. The product is also listed by major distributors, but inventory and commercial terms can change independently of the device lifecycle. Use the quote form to obtain current commercial confirmation without relying on a potentially stale listing or a price shown elsewhere.
What is the price of MAX361ESE+?
The current commercial price for MAX361ESE+ is not shown in the verified structured listing data. Use the Request a Quote form on this page to request current pricing for the exact MAX361ESE+ ordering code and required quantity. Quote requests are preferable for an obsolete or specialized ordering variant because package availability, condition, and volume requirements can materially affect the commercial response.
What is the lead time and stock status for MAX361ESE+?
Current stock and lead time for MAX361ESE+ should be confirmed through the Request a Quote form on this page. The product page identifies the MAX361 family as production devices, while individual distributor listings can change in availability without notice. Include the required order quantity, target delivery date, and acceptable manufacturing condition in the request so the supply response matches the production plan.
What can replace MAX361ESE+?
MAX361ESE, MAX361CSE+, and MAX353CSE+ are the verified replacement candidates with compatible SOIC-16 package references. MAX361ESE and MAX361CSE+ remain within the MAX361 family and therefore provide the closest architectural match. MAX353CSE+ is presented as a pin-compatible replacement candidate but requires a more careful review of on resistance, leakage, control logic, and signal-range specifications. Board changes should not be expected for any candidate after pin-level verification.
What are the key specifications of MAX361ESE+ that engineers should know?
The key MAX361ESE+ specifications are four SPST channels, normally closed construction, a 1:1 configuration, maximum on resistance of 85 ohms, channel matching within 3 ohms, and maximum on-resistance variation of 9 ohms over the analog signal range. The device is packaged in a 16-SOIC surface-mount package. These specifications position it for precision analog routing, instrumentation, test systems, and multiplexed sensor interfaces.
Is the MAX361ESE+ a Maxim Integrated or Analog Devices part?
The MAX361ESE+ is a Maxim Integrated part, and Analog Devices now presents and supports the MAX361 product family on its official product page. Distributor records may display Analog Devices Inc./Maxim Integrated or Analog Devices/Maxim Integrated because of the corporate relationship and product transition. The manufacturer designation for the product family is Maxim Integrated, while the current authoritative technical resource is hosted by Analog Devices.

Data referensi engineering untuk MAX361ESE+ — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the MAX361ESE+ when the design requires four normally closed SPST channels, controlled 85-ohm maximum on resistance, and manufacturer-guaranteed matching within 3 ohms between channels. It is particularly suitable for precision instrumentation, test equipment, and multiplexed sensor interfaces where predictable path resistance matters. MAX361ESE is the closest same-family ordering alternative when the original design does not require the plus-qualified code. MAX361CSE+ is useful when its temperature grade is appropriate, although the final operating-temperature requirement should determine the selection. MAX353CSE+ is a candidate only after its control polarity, leakage, on resistance, signal range, and supply specifications are confirmed against the MAX361 design. For every candidate, verify the complete 16-SOIC pin mapping and recalculate source loading, settling time, and measurement error before production release.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini MAX361ESE MAX361CSE+ MAX353CSE+
Package 16-SOIC 16-SOIC SOIC-16 SOIC-16
Brand Maxim Integrated Maxim Integrated Maxim Integrated Maxim Integrated
Number of Channels 4 4 4 4
Switch Configuration Quad SPST 4 x SPST 4 x SPST 4 x SPST

Diferensiator Kunci

  • Four normally closed channels in one package (vsMAX353CSE+)
  • Defined channel-to-channel resistance matching (vsMAX353CSE+)
  • Verified same-family ordering alternatives (vsMAX361CSE+)

Catatan Desain

Place the MAX361ESE+ close to the source, destination, or shared measurement node so that switch resistance and parasitic capacitance do not become significant parts of the signal path. Keep analog traces short, avoid unnecessary stubs, and route control signals away from sensitive input traces. For high-impedance nodes, use guarding and a clean ground reference to prevent leakage and capacitive pickup from overwhelming the signal.

Use local supply bypassing and verify the control-pin voltage levels from the manufacturer datasheet before connecting digital control signals to the switch. The MAX361ESE+ is an analog-routing device, but supply and control transitions can inject disturbance into nearby analog paths. Keep the bypass capacitor close to the device supply pins, provide an adequate return path, and sequence control outputs so that unintended signal combinations are not created during startup.

Do not treat the 85-ohm on resistance as the only error term. Include the source impedance, switch on resistance, input capacitance, amplifier bias error, and leakage current in the measurement or signal-transfer budget. When substituting a candidate, verify the complete pinout, control polarity, supply requirements, signal range, and temperature grade rather than relying on package shape alone.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The MAX361 is an analog interface IC and is not identified as an AEC-Q100 automotive device in the manufacturer product information. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not stated in the verified product data.

Data disahkan pada: 2026-11-19 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

MAX361ESE+ datasheet MAX361ESE+ pinout MAX361ESE+ datasheet pdf MAX361ESE+ specifications MAX361ESE+ equivalent MAX361ESE+ replacement MAX361ESE+ price MAX361ESE+ stock Maxim Integrated MAX361ESE+ MAX361ESE+ 16-SOIC footprint MAX361ESE+ precision instrumentation MAX361ESE+ vs MAX361CSE+

Komponen dan Istilah Terkait

Maxim Integrated Analog Devices MAX361ESE+ MAX361ESE MAX361CSE+ MAX353CSE+ precision analog switch analog switch IC multiplexer SPST normally closed switch 1:1 configuration on resistance 85 ohm on-resistance matching leakage current signal routing instrumentation test equipment sensor multiplexing 16-SOIC SOIC package family surface mount SMD
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ