MC74F283N - 4-Bit Fast-Carry Full Adder | onsemi
部品番号: MC74F283N ✗ 生産終了MC74F283N 概要
A full adder is a combinational digital-logic building block that adds two binary operands and an incoming carry bit, producing one sum bit and one carry-out bit. Four full-adder stages combined in one IC provide a practical 4-bit adder subsystem. The MC74F283N belongs to the MC74F logic family and is positioned as a high-speed logic function for applications requiring more propagation performance than older LS-series devices.
The MC74F283N provides four independently addressed sum outputs, four operand inputs for each addition stage, and carry connections that can be cascaded with additional adder packages. Fast carry reduces the delay between adjacent bit stages, which is important in synchronous counters, arithmetic units, address-generation logic, test equipment, and control systems where timing margin is limited.
The 16-DIP package supports conventional through-hole PCB assembly and prototyping. Because the device exposes its arithmetic signals directly, system designers must account for signal fan-out, input transition times, unused inputs, and propagation delay when constructing clocked or cascaded arithmetic networks. The 5.5 V supply requirement is a key selection criterion for systems designed around classic TTL-compatible logic families.
Typical uses include binary counters, digital accumulators, frequency-division and sequencing circuits, arithmetic control units, instrumentation, industrial automation, and educational logic systems. A multi-package implementation can extend the adder width beyond four bits by connecting the carry output of one MC74F283N to the carry input of the next package.
For a new design, verify the complete pin assignment, propagation-delay limits, supply-current behavior, and input requirements in the manufacturer datasheet before finalizing PCB routing or system timing. The DIP footprint also makes this device particularly convenient where component insertion, inspection, repair, or manual prototyping is preferred over compact surface-mount assembly.
ドロップイン代替品: MC74F283N — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
DM74LS283N
✅ ドロップイン📋 参考代替品(カタログ未掲載)
SN74LS283
✅ ドロップイン📋 参考代替品(カタログ未掲載)
CD74HCT283
✅ ドロップイン📋 参考代替品(カタログ未掲載)
MC74F283N 最大定格&電気的特性
| 機能 | 4-bit binary full adder with fast carry |
| Logic Family | MC74F |
| 電源電圧 | 5.5 V |
| Data Width | 4 bits |
| Package Type | 16-DIP |
| ピン数 | 16 pins |
| Carry Architecture | Fast carry |
| Logic Type | Combinational logic |
| Arithmetic Function | Binary addition |
| 実装タイプ | Through-hole |
| Manufacturer | onsemi |
MC74F283N 16-dip ピン配置ガイド
MC74F283N (16-dip パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MC74F283N.
詳細は データシート をご参照ください。
主な用途
MC74F283N の用途: 6 件s: Binary Counter Accumulator, Industrial Arithmetic Control, Frequency Divider and Sequence Logic, Digital Instrumentation Front End, Address Generation Logic, Logic Education and Prototyping.
Binary Counter Accumulator
The MC74F283N fits counter and accumulator designs because it combines four binary full-adder stages in one 16-DIP IC. Its fast-carry architecture supports arithmetic between a current count and an operand, while its parallel sum outputs make the result available to subsequent digital logic. A design can use the carry and sum signals to form an incrementing, decrementing, or programmable counting system. Timing closure remains important because the system must meet the propagation-delay limits of the selected logic family and the load presented by the following stage.
おすすめ
Industrial Arithmetic Control
The MC74F283N is appropriate for industrial arithmetic-control blocks where a compact, dedicated adder is preferable to implementing four full-adder functions from basic gates. The 4-bit width matches common nibble-oriented control buses, and the dedicated fast-carry path simplifies the implementation of multi-stage arithmetic. In a machine-control design, the outputs can represent an error count, setpoint difference, or step-index value. The onsemi device’s 5.5 V supply and 16-DIP package make it most suitable where through-hole assembly and classic logic-family integration are already established.
おすすめ
Frequency Divider and Sequence Logic
The MC74F283N can participate in frequency-division and sequencing circuits by adding binary states or establishing carry-dependent transitions. Four internal full-adder stages allow multiple bits to be processed together, reducing the number of packages needed for parallel arithmetic. A designer may connect the sum outputs to programmable or fixed logic and use the carry output as a state-transition qualifier. Because this is combinational logic, any registered output must be paired with appropriate clocking circuitry, and propagation delay must be included when deriving the maximum operating frequency.
おすすめ
Digital Instrumentation Front End
The MC74F283N is suitable for digital instrumentation that performs binary addition on measurement, status, or calibration data. The 4-bit adder provides a straightforward way to combine two nibbles and determine whether a carry was generated, which can support threshold comparison, decade-counter arithmetic, or error-offset calculations. Its fast-carry function helps minimize delay within the arithmetic path, while the DIP package simplifies serviceable instrument boards. Signal-conditioning, input levels, grounding, and timing must still be designed around the datasheet limits of the MC74F family.
おすすめ
Address Generation Logic
The MC74F283N can be used in address-generation or offset-calculation logic where a 4-bit addition result is needed. Designers can add a base address nibble to a programmable offset and use the carry output to propagate a boundary into another arithmetic stage. This approach is useful in compact legacy control systems, address decoders, and educational processor subsystems. The device’s dedicated adder function reduces gate-level design effort, and its 16-DIP footprint allows direct insertion into existing through-hole prototyping boards. Cascading with additional adder packages supports wider address arithmetic.
おすすめ
Logic Education and Prototyping
The MC74F283N is well suited to laboratory and educational prototyping because it exposes a complete four-bit adder with carry in a conventional 16-DIP package. Students can demonstrate binary addition, subtraction through logic inversion, carry propagation, cascaded arithmetic, and synchronous counter behavior using visible breadboards or training boards. The dedicated fast-carry path makes propagation observations easier than a gate-level implementation. Logic analyzers can be connected to the sum and carry lines for timing studies, while the device’s through-hole construction supports rework and replacement in instructional systems.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MC74F283N — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | DM74LS283N | SN74LS283 | CD74HCT283 |
|---|---|---|---|---|
| Package | 16-DIP | 16-PDIP | 16-PDIP | 16-PDIP |
| Brand | onsemi | onsemi | Texas Instruments | Texas Instruments |
| Function | 4-bit binary full adder with fast carry | Binary full adder with fast carry | 4-bit binary full adder | 4-bit binary full adder |
| Data Width | 4 bits | 4 bits | 4 bits | 4 bits |
| Logic Family | MC74F | 74LS | 74LS | 74HCT |
| Carry Architecture | Fast carry | Fast carry | Fast carry | Fast carry |
| Mounting Type | Through-hole | Through-hole | Through-hole | Through-hole |
| Special Features | Fast carry | Fast carry | Fast carry | HCT-family input compatibility |
主な差別化要因
- Uses F-family logic timing rather than LS-family timing (vs DM74LS283N)
- Combines four binary full-adder stages in one package (vs SN74LS283)
- Maintains a 16-pin through-hole footprint for classic arithmetic boards (vs CD74HCT283)
設計ノート
Treat every sum and carry output as a timing-critical path. Include the selected device’s propagation delay, trace delay, input slew effects, and receiver setup requirements when establishing the system clock limit. Use the manufacturer timing diagram to determine whether the carry chain remains valid at the intended temperature and supply voltage. Do not assume that a functionally identical replacement has the same delay budget.
Place the IC close to the buses it receives and drives, and keep the four operand paths, four sum paths, and carry connections as short as practical. In a cascaded design, route the carry output directly toward the next package’s carry input to minimize accumulated delay. Maintain a continuous ground reference and avoid routing high-current or switching-node traces adjacent to the adder inputs.
A same-package replacement is not automatically a timing-equivalent replacement. MC74F283N, DM74LS283N, SN74LS283, and CD74HCT283 belong to different logic families, so input thresholds, output levels, power behavior, and propagation delays must be compared. Also verify that every input is actively driven or connected according to the manufacturer’s unused-input guidance; otherwise, unused logic inputs may introduce unpredictable switching.
Budget the IC’s supply current across every operating state, including maximum switching activity on the sum and carry outputs. Because the exact MC74F283N supply-current limit is not stated in the product listing, obtain the manufacturer datasheet before sizing the rail and decoupling network. Place local bypass capacitance close to the supply pins and keep the return path short to reduce supply noise at the switching outputs.
コンプライアンス情報
The available product information identifies the manufacturer, function, supply voltage, bit width, and package, but does not state RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status.