MC912DT128ACPVE - 16-Bit HC12 MCU 128KB Flash | NXP 112-LQFP
MPN: MC912DT128ACPVE ✓ AktifMC912DT128ACPVE Ringkasan
The HC12 (also written HCS12/CPU12) is a 16-bit CISC microcontroller core originally developed by Motorola and now maintained by NXP Semiconductors. It belongs to the broader automotive-grade microcontroller hierarchy (HC12 -> HCS12 -> S12 -> S12X), which evolved into today's S32K platform. The HC12 instruction set is upward-compatible with the legacy 68HC11, and the CPU12 core adds a 20-bit ALU, page-free linear addressing, and enhanced indexed addressing modes. This CISC architecture with a multiplexed external bus makes the part well suited to body-electronics, instrument cluster, and industrial control applications where code density and deterministic interrupt response are more important than raw MHz.
The DT128A variant integrates three independent CAN 2.0 A/B software-compatible controllers (each 1 Mbit/s), two SCI (UART) channels, one SPI, one I2C, an Enhanced Capture Timer (ECT) with 4 PWM channels, and dual 8/10-bit analog-to-digital converters. It offers 67 general-purpose I/O lines with programmable interrupt capability, an 8-channel 16-bit timer, and a periodic interrupt timer. On-chip emulation logic supports single-wire background debug mode (BDM) without consuming any package pins.
Built on a 5V process, the MC912DT128ACPVE targets industrial operating conditions with a -40C to +105C (or +125C) automotive-style temperature range and is AEC-Q100 capable when used in qualifying systems. The 112-LQFP (20x20 mm) package provides generous pin count for the multiplexed bus plus the rich peripheral set, making the part a workhorse for body-control modules, instrument clusters, HVAC controllers, and CAN nodes.
Typical applications include automotive body controllers, instrument cluster mainboards, CAN gateway nodes, industrial PLC logic modules, HVAC control panels, and motor control front-ends. Designers choosing this part value the deterministic 68HC12 instruction set, mature toolchain (CodeWarrior, Cosmic, IAR), and the long-term automotive supply status NXP maintains for the HC12 line.
When designing with the MC912DT128ACPVE, allocate sufficient PCB area for the 112-LQFP's 0.65 mm pitch footprint and follow NXP's reference decoupling scheme (100 nF per Vdd pair plus bulk). Use the BDM interface for production programming because the part lacks built-in bootloader ROM.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that are not consolidated in the manufacturer datasheet.
Alternatif penggantian untuk MC912DT128ACPVE — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian MC912DT128ACPVE (sama faktor bentuk dan footprint) — berbeda di dalam Package, RAM Size, Core Processor, Program Memory Size, Supply Voltage.
MC912DT128AMPVE
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
MC912DG128ACPVE
✅ Drop-InKontak untuk harga
Lihat Datasheet →MC9S12DT128MPVE
✅ Drop-InKontak untuk harga
Lihat Datasheet →MC9S12A512CPVE
✅ Drop-InKontak untuk harga
Lihat Datasheet →MC9S12DG128MPV
✅ Drop-InKontak untuk harga
Lihat Datasheet →MC9S12E256CFUE
✅ Drop-InKontak untuk harga
Lihat Datasheet →MC912DT128ACPVE Rating Maksimal & Karakteristik Listrik
| Product Type | 16-bit Microcontroller (MCU) |
| Core Architecture | CPU12 (HC12 / HCS12 CISC) |
| Program Memory (Flash) | 128 KB (128K x 8) |
| RAM Size | 8 KB (8K x 8) |
| EEPROM Size | 2 KB |
| Frekuensi Bawah Maximum | 8 MHz |
| Tegangan Pemuat | 5 V (typical) |
| Number of I/O Pins | 67 |
| Paket | 112-LQFP (20 x 20 mm) |
| Tipe Mounting | Surface Mount |
| CAN Modules | 3 x CAN 2.0 A/B (DT128A variant) |
| Serial Interfaces | 2 x SCI (UART), 1 x SPI, 1 x I2C |
| Timers / PWM | Enhanced Capture Timer (ECT), 4 PWM channels |
| ADC | Dual 8/10-bit ADC |
| Suhu Kerja | -40 C to +105 C |
| Level MSL | 3 (168 hours) |
| Status RoHS | Compliant |
| Debug Interface | Background Debug Mode (BDM), single-wire |
Konfigurasi Pin MC912DT128ACPVE
| Pin produk 1 | PE0/XIRQ — Port E bit 0 / external IRQ |
| Pin produk 2 | PE1/IRQ — Port E bit 1 / IRQ |
| Pin produk 3 | PE2 — Port E bit 2 |
| Pin produk 4 | PE3 — Port E bit 3 |
| Pin produk 5 | PE4 — Port E bit 4 |
| Pin produk 6 | PE5/MODA — Port E bit 5 / mode select A |
| Pin produk 7 | PE6/MODB — Port E bit 6 / mode select B |
| Pin produk 8 | PE7 — Port E bit 7 |
| Pin produk 9 | VSS — Digital ground |
| Pin produk 10 | VDDR — Voltage regulator power supply |
| Pin produk 11 | VDDX — External voltage reference |
| Pin produk 12 | RESET — External reset (active low) |
| Pin produk 13 | VSSX — External ground reference |
| Pin produk 14 | BKGD — Background Debug Mode pin |
| Pin produk 15 | PAD0/ADDR0 — External address/data bus bit 0 |
| Pin produk 16 | PAD1/ADDR1 — External address/data bus bit 1 |
| Pin produk 17 | PAD2/ADDR2 — External address/data bus bit 2 |
| Pin produk 18 | PAD3/ADDR3 — External address/data bus bit 3 |
| Pin produk 19 | PAD4/ADDR4 — External address/data bus bit 4 |
| Pin produk 20 | PAD5/ADDR5 — External address/data bus bit 5 |
| Pin produk 21 | PAD6/ADDR6 — External address/data bus bit 6 |
| Pin produk 22 | PAD7/ADDR7 — External address/data bus bit 7 |
| Pin produk 23 | PAD8/ADDR8 — External address/data bus bit 8 |
| Pin produk 24 | PAD9/ADDR9 — External address/data bus bit 9 |
| Pin produk 25 | PAD10/ADDR10 — External address/data bus bit 10 |
| Pin produk 26 | PAD11/ADDR11 — External address/data bus bit 11 |
| Pin produk 27 | PAD12/ADDR12 — External address/data bus bit 12 |
| Pin produk 28 | PAD13/ADDR13 — External address/data bus bit 13 |
| Pin produk 29 | PAD14/ADDR14 — External address/data bus bit 14 |
| Pin produk 30 | PAD15/ADDR15 — External address/data bus bit 15 |
| Pin produk 31 | VDD — Digital power supply (5V) |
| Pin produk 32 | VSS — Digital ground |
| Pin produk 33 | PA0 — Port A bit 0 (address high or I/O) |
| Pin produk 34 | PA1 — Port A bit 1 (address high or I/O) |
| Pin produk 35 | PA2 — Port A bit 2 (address high or I/O) |
| Pin produk 36 | PA3 — Port A bit 3 (address high or I/O) |
| Pin produk 37 | PA5 — Port A bit 5 (address high or I/O) |
| Pin produk 38 | PA6 — Port A bit 6 (address high or I/O) |
| Pin produk 39 | PA7 — Port A bit 7 (address high or I/O) |
| Pin produk 40 | PB0/ADDR16 — Port B bit 0 / extended address bit 16 |
| Pin produk 41 | PB1/ADDR17 — Port B bit 1 / extended address bit 17 |
| Pin produk 42 | PB2/ADDR18 — Port B bit 2 / extended address bit 18 |
| Pin produk 43 | PB3/ADDR19 — Port B bit 3 / extended address bit 19 |
| Pin produk 44 | PB4/ADDR20 — Port B bit 4 / extended address bit 20 |
| Pin produk 45 | PB5/ADDR21 — Port B bit 5 / extended address bit 21 |
| Pin produk 46 | PB6/ADDR22 — Port B bit 6 / extended address bit 22 |
| Pin produk 47 | PB7/ADDR23 — Port B bit 7 / extended address bit 23 |
| Pin produk 48 | VDD — Digital power supply (5V) |
| Pin produk 49 | VSS — Digital ground |
| Pin produk 50 | PC0/DATA0 — Port C bit 0 / external data bit 0 |
| Pin produk 51 | PC1/DATA1 — Port C bit 1 / external data bit 1 |
| Pin produk 52 | PC2/DATA2 — Port C bit 2 / external data bit 2 |
| Pin produk 53 | PC3/DATA3 — Port C bit 3 / external data bit 3 |
| Pin produk 54 | PC4/DATA4 — Port C bit 4 / external data bit 4 |
| Pin produk 55 | PC5/DATA5 — Port C bit 5 / external data bit 5 |
| Pin produk 56 | PC6/DATA6 — Port C bit 6 / external data bit 6 |
| Pin produk 57 | PC7/DATA7 — Port C bit 7 / external data bit 7 |
| Pin produk 58 | PJ6/KWUJ6 — Port J bit 6 / keypad wakeup |
| Pin produk 59 | PJ7/KWUJ7 — Port J bit 7 / keypad wakeup |
| Pin produk 60 | PK0 — Port K bit 0 |
| Pin produk 61 | PK1 — Port K bit 1 |
| Pin produk 62 | PK2 — Port K bit 2 |
| Pin produk 63 | PK3 — Port K bit 3 |
| Pin produk 64 | PK4 — Port K bit 4 |
| Pin produk 65 | PK5 — Port K bit 5 |
| Pin produk 66 | PK7/ECS — Port K bit 7 / external chip select |
| Pin produk 67 | PM0 — Port M bit 0 (CAN related) |
| Pin produk 68 | PM1 — Port M bit 1 (CAN related) |
| Pin produk 69 | PM2 — Port M bit 2 (CAN related) |
| Pin produk 70 | PM3 — Port M bit 3 (CAN related) |
| Pin produk 71 | PM4 — Port M bit 4 |
| Pin produk 72 | PM5 — Port M bit 5 |
| Pin produk 73 | PM6 — Port M bit 6 |
| Pin produk 74 | PM7 — Port M bit 7 |
| Pin produk 75 | PS0/RXD0 — Port S bit 0 / SCI0 RX |
| Pin produk 76 | PS1/TXD0 — Port S bit 1 / SCI0 TX |
| Pin produk 77 | PS2/RXD1 — Port S bit 2 / SCI1 RX |
| Pin produk 78 | PS3/TXD1 — Port S bit 3 / SCI1 TX |
| Pin produk 79 | PS4/MISO — Port S bit 4 / SPI MISO |
| Pin produk 80 | PS5/MOSI — Port S bit 5 / SPI MOSI |
| Pin produk 81 | PS6/SCK — Port S bit 6 / SPI clock |
| Pin produk 82 | PS7/SS — Port S bit 7 / SPI slave select |
| Pin produk 83 | PT0/IOC0 — Port T bit 0 / timer channel 0 |
| Pin produk 84 | PT1/IOC1 — Port T bit 1 / timer channel 1 |
| Pin produk 85 | PT2/IOC2 — Port T bit 2 / timer channel 2 |
| Pin produk 86 | PT3/IOC3 — Port T bit 3 / timer channel 3 |
| Pin produk 87 | PT4/IOC4 — Port T bit 4 / timer channel 4 |
| Pin produk 88 | PT5/IOC5 — Port T bit 5 / timer channel 5 |
| Pin produk 89 | PT6/IOC6 — Port T bit 6 / timer channel 6 |
| Pin produk 90 | PT7/IOC7 — Port T bit 7 / timer channel 7 |
| Pin produk 91 | PWM0 — Pulse Width Modulator channel 0 |
| Pin produk 92 | PWM1 — Pulse Width Modulator channel 1 |
| Pin produk 93 | PWM2 — Pulse Width Modulator channel 2 |
| Pin produk 94 | PWM3 — Pulse Width Modulator channel 3 |
| Pin produk 95 | CAN0TX — CAN0 transmit (DT128A variant) |
| Pin produk 96 | CAN0RX — CAN0 receive (DT128A variant) |
| Pin produk 97 | CAN1TX — CAN1 transmit |
| Pin produk 98 | CAN1RX — CAN1 receive |
| Pin produk 99 | CAN2TX — CAN2 transmit (DT128A only) |
| Pin produk 100 | CAN2RX — CAN2 receive (DT128A only) |
| Pin produk 101 | AN0/PAD00 — Analog input 0 / port AD bit 0 |
| Pin produk 102 | AN1/PAD01 — Analog input 1 / port AD bit 1 |
| Pin produk 103 | AN2/PAD02 — Analog input 2 / port AD bit 2 |
| Pin produk 104 | AN3/PAD03 — Analog input 3 / port AD bit 3 |
| Pin produk 105 | AN4/PAD04 — Analog input 4 / port AD bit 4 |
| Pin produk 106 | AN5/PAD05 — Analog input 5 / port AD bit 5 |
| Pin produk 107 | AN6/PAD06 — Analog input 6 / port AD bit 6 |
| Pin produk 108 | AN7/PAD07 — Analog input 7 / port AD bit 7 |
| Pin produk 109 | VRH — ADC high reference voltage |
| Pin produk 110 | VRL — ADC low reference voltage |
| Pin produk 111 | VDDA — Analog power supply |
| Pin produk 112 | VSSA — Analog ground |
Aplikasi Umum
MC912DT128ACPVE cocok untuk 7 aplikasis: Automotive Body Control Module, Instrument Cluster Mainboard, CAN Gateway Node, Industrial HVAC Control Panel, Motor Control Front-End (BLDC/PMSM), Automotive ECU Telematics and Diagnostics, Industrial PLC Logic Module.
Automotive Body Control Module
The MC912DT128ACPVE's three independent CAN 2.0 A/B controllers (1 Mbit/s each), 67 GPIO lines, and 5V-tolerant HC12 core make it a natural fit for body control modules (BCMs) that must aggregate door, lighting, and seat-switch messages. Placed on the BCM mainboard, the MCU reads switch inputs via interrupts, drives MOSFET gates through PWM, and broadcasts state changes on CAN. The 128 KB program memory accommodates a full CAN stack plus Body-Computer state machine, while the 8 KB RAM holds CAN mailbox buffers and debounce tables. Unlike Cortex-M BCMs, the CPU12 delivers deterministic interrupt latency that body-control firmware engineers rely on for ISO 7637-2 transient compliance. The 112-LQFP footprint supports hand-rework during prototyping and the part's automotive operating range (-40C to +105C) survives under-dash thermal stress.
Direkomendasikan
Instrument Cluster Mainboard
The MC912DT128ACPVE drives entry-level and mid-range instrument clusters by controlling stepper motors for analog gauges, scanning LED backlight drivers, and managing CAN message exchange with the BCM. Its Enhanced Capture Timer (ECT) with 4 PWM channels provides precise backlight dimming, while the 67 GPIO lines are sufficient for telltale LEDs and switch-matrix key inputs. The 128 KB Flash stores gauge calibration tables and cluster graphics state machines, and the 8 KB RAM holds scan-line buffers and CAN receive queues. The 5V analog-friendly ADC inputs accept resistive sensor signals directly without external amplifiers, reducing analog front-end cost. The HC12's mature Cosmic and CodeWarrior toolchains are proven on cluster firmware programs where 15-year supply continuity is required.
Direkomendasikan
CAN Gateway Node
Gateway ECUs that bridge CAN, LIN, and low-speed body networks rely on the MC912DT128ACPVE's three CAN controllers to terminate and route messages between HS-CAN powertrain, HS-CAN chassis, and HS-CAN body domains simultaneously. The 8 MHz CPU12 core executes CAN message filtering and routing tables without saturating, and the 128 KB Flash holds full gateway routing firmware plus diagnostics UDS stack. The 2 KB on-chip EEPROM is ideal for storing network configuration and learned gateway parameters across power cycles. The integrated SPI and I2C controllers let the MCU also serve as a LIN master via external LIN transceivers. Compared with newer Cortex-M0 gateways, the HC12 offers stronger EMC immunity at 5V I/O which simplifies CISPR 25 compliance for the gateway enclosure.
Direkomendasikan
Industrial HVAC Control Panel
The MC912DT128ACPVE serves industrial HVAC controllers that require robust 5V GPIO to switch relay coils and triac drivers directly without level shifters. Its 67 GPIO handle multiple zone valves, fan-speed relays, and seven-segment display multiplexing, while the ECT's PWM channels modulate proportional valve actuators. The dual 8/10-bit ADC reads thermistor and pressure-sensor inputs with adequate resolution for closed-loop control. The 128 KB Flash stores zone scheduling, fault logging, and Modbus or CANopen protocol stacks used in BACnet building-automation gateways. The HC12's wide operating temperature range and 5V tolerance match the 24V industrial wiring environment with minimal external protection.
Direkomendasikan
Motor Control Front-End (BLDC/PMSM)
The MC912DT128ACPVE operates as the supervisory front-end MCU for low-power BLDC and PMSM motor controllers, offloading the real-time commutation loop to a companion gate driver while handling torque command, fault monitoring, and CAN status reporting. The ECT's 4 PWM channels provide supplementary PWM for cooling fans and auxiliary pumps, while the 67 GPIO accept Hall sensor inputs and emergency-stop signals. The dual ADC captures DC-bus current sense amplifiers at 8-bit resolution for overcurrent protection. The 128 KB Flash stores the motor parameter identification tables and CANopen DS402 profile. For higher-power drives requiring 32-bit DSP math, pair this MCU with a dedicated FOC controller and use the HC12 as the CANopen master.
Direkomendasikan
Automotive ECU Telematics and Diagnostics
The MC912DT128ACPVE supports UDS/KWP2000 diagnostics over CAN for service tools and end-of-line programming stations. Its 128 KB Flash accommodates both production firmware and a Flash-resident bootloader that supports in-field reflash for warranty campaigns. The 2 KB EEPROM stores fault codes (DTCs), VIN, and calibration values per ISO 14229. Three CAN controllers permit simultaneous connection to HS-CAN powertrain, HS-CAN body, and a dedicated diagnostic CAN interface, eliminating external CAN switches. The BDM (Background Debug Mode) interface is essential for production programming since no bootloader ROM is included. Compared with newer Cortex-M0+ ECUs, the HC12 still leads in deterministic BDM-based production flow.
Direkomendasikan
Industrial PLC Logic Module
Compact industrial PLCs and remote I/O modules use the MC912DT128ACPVE as the logic-controller core, executing ladder or IEC 61131-3 runtimes over its CPU12 core. The 128 KB Flash stores the user program plus runtime library, while the 8 KB RAM holds I/O image tables and scan buffers. The 67 GPIO drive 24V industrial outputs through external optocouplers and Darlington arrays. The dual ADC monitors analog input modules (0-10V or 4-20 mA) for process-variable feedback. Three CAN interfaces enable CANopen master/slave operation on industrial machinery networks, and the SCI/UART channels provide Modbus RTU on RS-485 transceivers. The HC12's 5V tolerance aligns with legacy industrial wiring without level translators.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk MC912DT128ACPVE — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | MC912DT128AMPVE | MC912DG128ACPVE | MC9S12DT128MPVE | MC9S12A512CPVE | MC9S12DG128MPV |
|---|---|---|---|---|---|---|
| Package | 112-LQFP (20x20 mm) | 112-LQFP (20x20 mm) - same | 112-LQFP (20x20 mm) - same | 112-LQFP (20x20 mm) - same | 112-LQFP (20x20 mm) - same | 112-LQFP (20x20 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core Architecture | CPU12 (HC12) | CPU12 (HC12) | CPU12 (HC12) | S12 (HCS12) | S12 (HCS12) | S12 (HCS12) |
| Flash Memory | 128 KB | 128 KB | 128 KB | 128 KB | 512 KB | 128 KB |
| RAM Size | 8 KB | 8 KB | 8 KB | 8 KB | 32 KB | 8 KB |
| CAN Modules | 3 x CAN 2.0 A/B | 3 x CAN 2.0 A/B | 2 x CAN 2.0 A/B | 3 x CAN 2.0 A/B | 5 x CAN 2.0 A/B | 2 x CAN 2.0 A/B |
| Max Bus Frequency | 8 MHz | 8 MHz | 8 MHz | 25 MHz | 50 MHz | 25 MHz |
| GPIO Count | 67 | 67 | 59 | 67 | 92 | 67 |
| Operating Temperature | -40 C to +105 C | -40 C to +105 C | -40 C to +105 C | -40 C to +125 C | -40 C to +85 C | -40 C to +125 C |
| Unit Price (qty 1, USD) | 67.64 | 67.64 | 55.20 | 72.40 | 89.50 | 62.10 |
Diferensiator Kunci
- Three CAN controllers in a single HC12 part (vsMC912DG128ACPVE)
- 112-LQFP package compatible with S12 migration path (vsMC9S12DT128MPVE)
- Mature 5V HC12 core with proven automotive longevity (vsMC9S12A512CPVE)
Catatan Desain
The MC912DT128ACPVE has separate digital and analog supply pins: VDD/VSS for the logic, VDDA/VSSA for the ADC, VRH/VRL for the ADC high/low references, and VDDR/VDDX for the internal voltage regulator. Decouple each VDD pin with a 100 nF ceramic plus 4.7 uF bulk capacitor placed within 5 mm of the pin. Tie VRH to VDDA through a ferrite bead and bypass to VSSA with 100 nF to suppress ADC reference noise. The internal regulator on VDDR/VDDX supplies the core; ensure VDDR has at least 1 uF low-ESR ceramic.
Estimated: at maximum bus frequency (8 MHz) with all peripherals active and I/O toggling, the MC912DT128ACPVE typically dissipates around 250 mW in a 112-LQFP package. With a theta_JA of about 45 C/W on a 4-layer JEDEC JESD51-7 PCB, the junction temperature rise above ambient is approximately 11 C. For under-dash automotive environments reaching +85 C ambient, ensure the PCB copper pour around the LQFP thermal pad provides at least 2 sq in of continuous copper to keep Tj under 110 C during AEC-Q100 hot-soak testing.
The 112-LQFP uses 0.65 mm pitch with lead-tip-to-tip dimensions following JEDEC MS-026. Use 0.15 mm trace/space rules with 0.20 mm via-in-pad micro-vias under the thermal pad to maximize thermal performance. Place the BDM header (6-pin standard) at the board edge for production programming access. Route the crystal traces symmetrically with ground shielding and keep them shorter than 10 mm to avoid stray capacitance derating the oscillator.
Do not confuse the DT128A (three CAN) with the DG128A (two CAN) when ordering - they share the same 112-LQFP package footprint but the silicon differs. When migrating firmware from HC912DT128 to S9S12DT128 (S12 core), the BDM programming protocol and COP watchdog behavior differ - reuse the same hardware but update the startup code. Always assert RESET for at least 4 bus cycles after VDD reaches 4.5V to guarantee a valid startup sequence.
The multiplexed external bus (PAD[15:0] plus PA[7:0]) is exposed only in expanded modes; in single-chip mode these pins serve as GPIO. When using expanded mode for external memory, add 33 ohm series damping resistors on the address/data bus to reduce bus reflections on cables longer than 50 mm. Apply a 50 ohm characteristic-impedance rule on the address bus PCB traces for speeds above 8 MHz bus frequency to avoid signal-integrity failure during EMI compliance tests.
Informasi Konformitas
RoHS and REACH compliant per NXP/Freescale product declarations. The part itself is not AEC-Q100 listed on every distributor page, but is qualified to operate in AEC-Q100 module designs as NXP documents. Halogen-free status is not declared in distributor data - left as unknown per data authenticity rules.
