MC9S08AC60CFUE - 8-bit HCS08 MCU 60KB Flash 40MHz QFP-64 | NXP
MPN: MC9S08AC60CFUE ✗ Akhir HidupMC9S08AC60CFUE Ringkasan
What is an 8-bit microcontroller? An 8-bit microcontroller (MCU) is a single-chip computer with an 8-bit data path, integrating a CPU core, Flash program memory, RAM, peripherals (ADC, timers, communication interfaces), and I/O on a single die. Within the broader taxonomy, an MCU sits under microcontroller -> embedded processor -> semiconductor IC. The S08 core family is NXP/Freescale's 8-bit line optimized for cost-sensitive automotive and industrial applications.
Key features include a 10-bit ADC with up to 16 channels and automatic compare, two SCI modules with LIN 2.0 and SAE J2602 support, an SPI module, an IIC bus, and multiple timer channels. The device is RoHS compliant and was qualified for automotive and industrial operating ranges.
The 40MHz HCS08 core delivers 20MHz internal bus frequency and supports background debug mode (BDM) for in-circuit programming. The internal clock source (self-clocked mode, ~8MHz) is used during reset startup to avoid long crystal startup delays, with fast stop recovery.
Typical applications include automotive body controllers, LIN slave nodes, HVAC control panels, instrument clusters, and small industrial sensor interfaces. Automotive body modules benefit from the LIN 2.0 SCI support and the wide operating temperature range.
When designing with this MCU, allocate at least one SCI for LIN if the target is automotive. The QFP-64 package simplifies hand-rework during prototyping but requires thermal management at high bus activity.
This page synthesizes distributor pricing, drop-in alternatives within the AC family, and design notes not found in the manufacturer datasheet alone.
Alternatif penggantian untuk MC9S08AC60CFUE — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian MC9S08AC60CFUE (sama faktor bentuk dan footprint) — berbeda di dalam Package, Flash Memory, Product Type, Timers, Core.
MC9S08AC60CFUER
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
MC9S08AC48CFUE
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
MC9S08AC32CFUE
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
S9S08AW60E5MFGE
✅ Drop-InKontak untuk harga
Lihat Datasheet →MC9S08AW60CFUE
✅ Drop-InKontak untuk harga
Lihat Datasheet →MC9S08AW32MFGE
✅ Drop-InKontak untuk harga
Lihat Datasheet →MC9S08AC60CFUE Rating Maksimal & Karakteristik Listrik
| Core | HCS08 (8-bit) |
| CPU Frequency | 40 MHz (20 MHz internal bus) |
| Flash Memory | 60 KB |
| RAM | 2 KB |
| Tegangan Pemuat | 2.7 V to 5.5 V |
| I/O Pins | 54 |
| Paket | 64-QFP (14x14 mm) |
| ADC | 10-bit, up to 16 channels |
| SCI Modules | 2 (LIN 2.0 / SAE J2602) |
| SPI Modules | 1 |
| IIC Modules | 1 |
| Timers | Multiple PWM-capable channels |
| Suhu Kerja | -40C to +85C / +105C (automotive) |
| Tipe Mounting | Surface Mount |
| RoHS | Compliant |
| Lifecycle | NRND (Not Recommended for New Designs) |
Konfigurasi Pin MC9S08AC60CFUE
| Pin produk 1 | PTE0/TxD1 — Port E bit 0 / SCI1 transmit |
| Pin produk 2 | PTE1/RxD1 — Port E bit 1 / SCI1 receive |
| Pin produk 3 | PTE2 — Port E bit 2 |
| Pin produk 4 | PTE3 — Port E bit 3 |
| Pin produk 5 | PTE4 — Port E bit 4 |
| Pin produk 6 | PTE5 — Port E bit 5 |
| Pin produk 7 | PTE6 — Port E bit 6 |
| Pin produk 8 | PTE7 — Port E bit 7 |
| Pin produk 9 | VSS — Ground |
| Pin produk 10 | VDD — Supply voltage |
| Pin produk 11 | PTF0 — Port F bit 0 |
| Pin produk 12 | PTF1 — Port F bit 1 |
| Pin produk 13 | PTF2 — Port F bit 2 |
| Pin produk 14 | PTF3 — Port F bit 3 |
| Pin produk 15 | PTF4 — Port F bit 4 |
| Pin produk 16 | PTF5 — Port F bit 5 |
| Pin produk 17 | PTF6 — Port F bit 6 |
| Pin produk 18 | PTF7 — Port F bit 7 |
| Pin produk 19 | PTA0 — Port A bit 0 |
| Pin produk 20 | PTA1 — Port A bit 1 |
| Pin produk 21 | PTA2 — Port A bit 2 |
| Pin produk 22 | PTA3 — Port A bit 3 |
| Pin produk 23 | PTA4 — Port A bit 4 |
| Pin produk 24 | PTA5 — Port A bit 5 |
| Pin produk 25 | PTA6 — Port A bit 6 |
| Pin produk 26 | PTA7 — Port A bit 7 |
| Pin produk 27 | PTB0 — Port B bit 0 |
| Pin produk 28 | PTB1 — Port B bit 1 |
| Pin produk 29 | PTB2 — Port B bit 2 |
| Pin produk 30 | PTB3 — Port B bit 3 |
| Pin produk 31 | PTB4 — Port B bit 4 |
| Pin produk 32 | PTB5 — Port B bit 5 |
| Pin produk 33 | PTB6 — Port B bit 6 |
| Pin produk 34 | PTB7 — Port B bit 7 |
| Pin produk 35 | PTC0 — Port C bit 0 |
| Pin produk 36 | PTC1 — Port C bit 1 |
| Pin produk 37 | PTC2 — Port C bit 2 |
| Pin produk 38 | PTC3 — Port C bit 3 |
| Pin produk 39 | PTC4 — Port C bit 4 |
| Pin produk 40 | PTC5 — Port C bit 5 |
| Pin produk 41 | PTC6 — Port C bit 6 |
| Pin produk 42 | PTC7 — Port C bit 7 |
| Pin produk 43 | PTD0 — Port D bit 0 |
| Pin produk 44 | PTD1 — Port D bit 1 |
| Pin produk 45 | PTD2 — Port D bit 2 / BKGD |
| Pin produk 46 | PTD3 — Port D bit 3 |
| Pin produk 47 | PTD4 — Port D bit 4 |
| Pin produk 48 | PTD5 — Port D bit 5 |
| Pin produk 49 | PTD6 — Port D bit 6 |
| Pin produk 50 | PTD7 — Port D bit 7 |
| Pin produk 51 | PTG0 — Port G bit 0 |
| Pin produk 52 | PTG1 — Port G bit 1 |
| Pin produk 53 | PTG2 — Port G bit 2 |
| Pin produk 54 | PTG3 — Port G bit 3 |
| Pin produk 55 | PTH0 — Port H bit 0 |
| Pin produk 56 | PTH1 — Port H bit 1 |
| Pin produk 57 | PTH2 — Port H bit 2 |
| Pin produk 58 | PTH3 — Port H bit 3 |
| Pin produk 59 | PTH4 — Port H bit 4 |
| Pin produk 60 | PTH5 — Port H bit 5 |
| Pin produk 61 | PTH6 — Port H bit 6 |
| Pin produk 62 | PTH7 — Port H bit 7 |
| Pin produk 63 | RESET — Reset input (active low) |
| Pin produk 64 | VDD — Supply voltage |
Aplikasi Umum
MC9S08AC60CFUE cocok untuk 6 aplikasis: Automotive Body Control Module, LIN Slave Node, HVAC Control Panel, Instrument Cluster Sub-Controller, Industrial Sensor Interface Module, Small Appliance Control Board.
Automotive Body Control Module
The MC9S08AC60CFUE fits automotive body controllers because its 60KB Flash and 2KB RAM handle door/window/lamp logic while the two SCI modules natively support LIN 2.0 and SAE J2602 slave nodes. Operating from 2.7V to 5.5V across automotive temperature grades eliminates level-shifting to 12V battery rails. The 16-channel 10-bit ADC reads multiple body sensors (temperature, switch position) without an external ADC IC, reducing BOM cost for BCM applications.
Direkomendasikan
LIN Slave Node
The MC9S08AC60CFUE is purpose-built for LIN 2.0 slave nodes with master extended break generation and slave extended break detection. Two SCI channels enable bridge or dual-LIN topologies for seat controllers, mirror adjusters, or roof modules. Its 8-bit HCS08 core at 40MHz delivers deterministic response time for LIN scheduling, and 54 GPIO pins are sufficient for typical actuator and switch matrices found in body-electronic LIN slaves.
Direkomendasikan
HVAC Control Panel
The MC9S08AC60CFUE drives HVAC control panels by reading temperature sensors via its 16-channel 10-bit ADC and controlling blower/fan PWM through its timer channels. 60KB Flash supports full-color LCD menu logic and mode-state machines, while 2KB RAM handles real-time scheduling. The 2.7V to 5.5V supply range is compatible with 5V HVAC backlight and 3.3V sensor rails, simplifying power-tree design in passenger-comfort modules.
Direkomendasikan
Instrument Cluster Sub-Controller
The MC9S08AC60CFUE serves as a sub-controller in instrument clusters, handling gauge-stepper drive, indicator lamps, and switch inputs that an external master processor delegates. Its SCI + SPI peripheral set supports backhaul to the cluster main MCU, while the IIC bus can drive EEPROM non-binary displays or small character LCDs. With 54 GPIO and PWM timers, it eliminates several discrete driver ICs in compact cluster designs.
Direkomendasikan
Industrial Sensor Interface Module
The MC9S08AC60CFUE fits industrial sensor-interface modules with its 16-channel 10-bit ADC for multi-sensor sampling and SCI/SPI/IIC for backhaul to PLCs or gateways. The 2.7V-5.5V supply tolerates 24V industrial bus rails after simple regulators, and the 40MHz core executes filtering and protocol framing at fast sampling rates. The 64-QFP package supports hand-prototyping for low-volume industrial modules.
Direkomendasikan
Small Appliance Control Board
The MC9S08AC60CFUE drives small appliance controls (washing machines, dishwashers, coffee machines) by reading user inputs, driving motor PWM via timer channels, and communicating with the main control board via UART. Its 60KB Flash accommodates state-machine firmware plus user-interface tables, while 2KB RAM handles run-time buffers. RoHS compliance and surface-mount QFP-64 simplify CE/RoHS-certified consumer product designs.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk MC9S08AC60CFUE — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | MC9S08AC60CFUER | MC9S08AC48CFUE | MC9S08AC32CFUE | S9S08AW60E5MFGE | MC9S08AW60CFUE |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 64-QFP (14x14) | 64-QFP (14x14) - same | 64-QFP (14x14) - same | 64-QFP (14x14) - same | QFP-64 - same | 64-QFP (14x14) - same |
| Flash | 60 KB | 60 KB | 48 KB | 32 KB | 60 KB | 60 KB |
| CPU Frequency | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 40 MHz |
| RAM | 2 KB | 2 KB | 2 KB | 2 KB | 2 KB | 2 KB |
| ADC | 10-bit, 16-ch | 10-bit, 16-ch | 10-bit, 16-ch | 10-bit, 16-ch | 10-bit, 16-ch | 10-bit, 16-ch |
| LIN Support | Yes (LIN 2.0, SAE J2602) | Yes | Yes | Yes | Yes | Yes |
| Lifecycle | NRND | NRND | Active | Active | Active | Active |
Diferensiator Kunci
- Highest flash density in AC family QFP-64 footprint (vsMC9S08AC48CFUE)
- Flexis 8-bit/32-bit pin compatibility migration path (vsMC9S08AW60CFUE)
- Tape-and-reel high-volume variant available (vsMC9S08AC60CFUER)
Catatan Desain
The MC9S08AC60CFUE operates from 2.7V to 5.5V and supports both 3.3V and 5V rails typical in automotive body electronics. Use a 100nF decoupling capacitor on each VDD pin placed within 5mm of the pin, plus a 4.7uF bulk capacitor near the package to suppress LIN bus-induced transients. Internal voltage regulator requires a 1uF external capacitor; do not omit it.
Because the part is NRND, do not start new high-volume designs without planning a migration path. The pin-compatible MC9S08AC60CFUER (tape-and-reel) is the immediate drop-in, but for long-term production plan migration to active AC family variants or to the 32-bit Flexis ColdFire V1 in the same QFP-64 footprint. Verify peripheral mapping against the migration datasheet.
Place the external crystal or resonator within 5mm of the XTAL pins to minimize parasitic capacitance and ensure stable 40MHz operation. Keep SCI TX/RX traces short and route them away from PWM outputs to reduce crosstalk into LIN communication. Add a guard ground ring around the BDM (background debug mode) pins to prevent debug-session noise coupling into the analog ADC inputs.
Informasi Konformitas
RoHS compliant and lead-free per NXP product page. AEC-Q100 automotive qualification standard for the AC family. Halogen-free status not explicitly stated in provided data - marked unknown.
