Microchip Technology

MCP6549-E/P - 4-Comparator, 1.6-5.5V Open-Drain IC | Microchip

MPN: MCP6549-E/P ✓ Aktif
1.6 V to 5.5 V Vdss 600 nA Id 14-pin PDIP Package
MOQ: 1 |

MCP6549-E/P Ringkasan

The Microchip Technology MCP6549-E/P is a four-channel analog comparator IC operating from 1.6 V to 5.5 V, with rail-to-rail CMOS inputs, open-drain outputs, and a 14-pin PDIP package. Its typical quiescent current is 600 nA, its maximum specified quiescent current is 1 µA, and each output is capable of operating to 10 V. The MCP6549-E/P is intended for low-voltage threshold detection, signal conditioning, and portable or battery-powered systems.

A voltage comparator is an analog integrated circuit that compares two input voltages and produces a logic-level indication of their relationship. The MCP6549 belongs to the comparator hierarchy within analog and mixed-signal semiconductors, alongside interface ICs and amplifier ICs. Its four independent comparison channels can monitor four thresholds, conditions, or signals, reducing the number of discrete comparator packages required on a densely populated board.

The key features of the MCP6549-E/P include four general-purpose comparator elements, single-ended operation, rail-to-rail input behavior, and CMOS-compatible open-drain outputs. Its 1.6 V minimum supply voltage supports low-energy designs, while the 5.5 V maximum supply voltage covers common 3.3 V and 5 V systems. The typical 600 nA quiescent current is particularly useful when battery life is governed by continuously powered sensing or monitoring circuitry.

The open-drain architecture provides a flexible output arrangement because each output can pull low when the comparison condition is met but remains high impedance when inactive. A pull-up resistor establishes the high output level and allows the open-drain pins to be used in wired logic arrangements. The manufacturer describes the outputs as 10 V capable, which supports interface use beyond the nominal supply voltage when suitable external pull-up and circuit conditions are observed.

Typical uses include battery threshold detection, sensor-signal conditioning, industrial control interfaces, portable measurement equipment, and digital control systems. The four-channel organization is particularly useful when monitoring multiple supply rails, comparing several sensor outputs against common limits, or creating independent control decisions within one package. The low quiescent current supports always-on monitoring without imposing unnecessary continuous-load overhead.

When laying out the circuit, route each comparator input away from switching nodes and pull-up currents to minimize displacement errors near the decision threshold. Place output pull-up resistors close to the relevant open-drain pins, and use the package ground connection as the return path for both input signals and pull-up current. Check the operating limits for all input, output, and supply pins before applying signals that exceed the common-mode range.

This product page combines the manufacturer device information with package-focused engineering guidance, drop-in family options, comparison parameters, application examples, and practical layout considerations. It is intended to help engineers identify the correct device and integrate it without overlooking the open-drain pull-up requirements, low-voltage operating limits, or multi-channel routing considerations.

Alternatif penggantian untuk MCP6549-E/P — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian MCP6549-E/P (sama faktor bentuk dan footprint) — berbeda di dalam Comparator Type, Logic Compatibility, Maximum Quiescent Current, Output Type.

Microchip Technology
Comparator Type: Quad single-ended comparator
Logic Compatibility: TTL compatible
Maximum Quiescent Current: 1 microamp

MCP6546-E/P

✅ Drop-In
📦 14-pin PDIP
Same quad-comparator and PDIP architecture; the documented cross-reference identifies MCP6546-E/P as a comparable family part, while individual input-offset and response-time differences require datasheet confirmation.

📋 Alternatif referensi (tidak dalam katalog)

MCP6548-E/P

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 14-pin PDIP
Same-brand four-channel PDIP family option with a 0% difference in package pin count; specific threshold, timing, and temperature deltas must be verified against the MCP6549 datasheet.

📋 Alternatif referensi (tidak dalam katalog)

MCP6549-I/P

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
Microchip Technology
📦 14-pin PDIP
Quad single-ended comparator · 4 channels · 1.6 V to 5.5 V · 600 nA · 1 microamp · Open drain · 10 V · Rail-to-rail

Kontak untuk harga

Lihat Datasheet →

MCP6549-E/P Rating Maksimal & Karakteristik Listrik

Comparator Type General-purpose voltage comparator
Number of Comparator Elements 4 channels
Supply Voltage Range 1.6 V to 5.5 V
Typical Quiescent Current 600 nA
Maximum Quiescent Current 1 µA
Tipe Output Open-drain CMOS output
Input Common-Mode Range Rail-to-rail
Maximum Output Voltage Capability 10 V
Logic Compatibility TTL-compatible
Comparator Configuration Single-ended
Paket 14-pin PDIP
Package Pitch 7.62 mm
Package Body Width 0.300 in (7.62 mm)
Tipe Mounting Through-hole
Status RoHS Compliant

MCP6549-E/P 0.300 in (7.62 mm) Diamant Konfigurasi Panduan

Konfigurasi pin untuk MCP6549-E/P (0.300 in (7.62 mm) pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.

Diamant diagram pakai pakai 0.300 in (7.62 mm) untuk MCP6549-E/P

Tidak ada data diatribut pin yang tersedia untuk MCP6549-E/P.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

MCP6549-E/P cocok untuk 6 aplikasis: Battery Threshold Detection, Industrial Sensor Signal Conditioning, Portable Measurement Equipment, Power Rail Supervision, Smart Home Sensor Nodes, LED Lighting Control.

⚡

Battery Threshold Detection

The MCP6549-E/P fits battery-powered threshold detection because it accepts a 1.6 V to 5.5 V supply and consumes only 600 nA typical quiescent current, with a 1 µA maximum. Four channels can independently compare sensed inputs against reference thresholds and report each decision through an open-drain output. Use a pull-up resistor to establish the logic-high state, and account for its continuous current in the battery budget. The low-voltage range is suitable for single-cell and energy-harvesting front ends, while the four-channel organization reduces the number of packages required for multiple battery conditions.

🏭

Industrial Sensor Signal Conditioning

The MCP6549-E/P is suitable for conditioning several industrial sensor outputs against independent limits. Its four rail-to-rail comparison channels reduce component count when monitoring temperature, pressure, proximity, or analog control signals, and the open-drain outputs can directly drive transistor-enabled alert or interlock stages. The 1.6 V minimum operating voltage supports compact sensor nodes. A pull-up resistor defines the inactive state, while the 10 V output capability offers additional interface flexibility when the external pull-up and device operating limits are respected.

📱

Portable Measurement Equipment

The MCP6549-E/P fits portable measurement instruments where four sensor thresholds must be evaluated while keeping standby power low. A 600 nA typical quiescent current and 1 µA maximum limit the comparator's continuous overhead, making the device appropriate for battery-powered meters and field probes. Rail-to-rail inputs help evaluate signals near the low and high ends of the operating rail. Because the outputs are open drain, use local pull-ups or suitable downstream interfaces and avoid long traces that could increase susceptibility to coupling.

🖥️

Power Rail Supervision

The MCP6549-E/P can monitor multiple power-related signals in control systems by using its four independent comparator channels. The 1.6 V to 5.5 V operating range permits use in systems built around low-voltage rails, while rail-to-rail inputs support decisions near the supply boundaries. Open-drain outputs can pull down fault-indicator lines or drive an external stage. Include hysteresis or filtering where a monitored signal can cross the threshold slowly, and use the pin-description table to assign supply and ground correctly for the 14-pin PDIP.

🧩

Smart Home Sensor Nodes

The MCP6549-E/P is useful in smart-home sensor nodes that need autonomous threshold decisions before a microcontroller becomes active. Four channels can evaluate light, motion, contact, or environmental-sensor outputs, while the 600 nA typical quiescent current supports low standby demand. The open-drain output structure is compatible with pull-up-based digital buses or transistor drivers. Keep the comparator inputs short and separated from switching regulators, and select pull-up values that balance current consumption, rise time, and the voltage requirements of the downstream digital device.

💡

LED Lighting Control

The MCP6549-E/P can support LED lighting and illumination-control circuits by comparing four sensed conditions against reference levels. Rail-to-rail inputs are useful for signals spanning much of the low-voltage operating range, and the open-drain outputs can control suitable transistor stages rather than driving LED current directly. The 1.6 V minimum supply supports low-voltage lighting electronics. Select a pull-up resistor for the required logic speed, provide a current-limiting path for LEDs, and keep comparator inputs away from high-current LED drive traces to minimize switching-induced threshold shifts.

Ringkasan Produk Direkomendasikan

MCP6549-E/P Microchip Technology Digunakan di dalam: Battery Threshold Detection, Industrial Sensor Signal Conditioning, Portable Measurement Equipment, Power Rail Supervision, Smart Home Sensor Nodes, LED Lighting Control MCP6548-E/P Related Microchip comparator option Digunakan di dalam: Battery Threshold Detection, Power Rail Supervision MCP6546-E/P Related quad comparator family device Digunakan di dalam: Industrial Sensor Signal Conditioning, Smart Home Sensor Nodes MCP6549-I/P Microchip Technology Digunakan di dalam: Portable Measurement Equipment, LED Lighting Control
What is the operating voltage of MCP6549-E/P?
The MCP6549-E/P operates from 1.6 V to 5.5 V according to the Microchip MCP6549 manufacturer product information. This range supports low-voltage battery systems as well as common 3.3 V and 5 V rails. Design the pull-up network and every connected signal source so that their absolute voltage limits remain within the device's specified operating conditions.
What is the MCP6549-E/P?
The MCP6549-E/P is a four-channel, general-purpose analog comparator with open-drain CMOS outputs in a 14-pin PDIP package. According to the Microchip MCP6549 product information, it provides single-ended operation, rail-to-rail inputs, a typical quiescent current of 600 nA, and outputs capable of handling 10 V. It is suitable for threshold detection and low-power signal conditioning.
Where to buy MCP6549-E/P online?
The MCP6549-E/P can be requested through the Request a Quote form on this page. The form is the appropriate route for checking current commercial availability, minimum order quantity, and lead time for the exact 14-pin PDIP ordering code. Engineers should identify the complete MCP6549-E/P suffix when submitting the request so the production configuration remains unambiguous.
What is the price of MCP6549-E/P?
Current commercial pricing for MCP6549-E/P should be obtained through the Request a Quote form on this page. The form can confirm the quantity, package, and delivery requirements for the exact 14-pin PDIP device. Price is not embedded in this answer because commercial terms and component availability can change independently of the technical specifications.
What is the lead time for MCP6549-E/P?
The current lead time for MCP6549-E/P should be confirmed through the Request a Quote form on this page. Include the required order quantity and production date when requesting the quotation. The device's 1.6 V to 5.5 V operating range and four-channel configuration can be confirmed immediately, while manufacturing schedule and shipment timing depend on the commercial order.
Is MCP6549-E/P in stock?
Current stock for MCP6549-E/P should be confirmed through the Request a Quote form on this page rather than inferred from a general family listing. Specify whether the order is for prototype quantities or production quantities and provide the required ship-to location. This ensures the quotation reflects the exact 14-pin PDIP part and the intended delivery schedule.
MCP6549-E/P vs MCP6546-E/P - which is better for low-voltage systems?
The MCP6549-E/P is preferable when the design specifically requires four comparators, a 1.6 V minimum supply, and the lowest documented quiescent-current range of 600 nA typical and 1 µA maximum. The MCP6546-E/P is a related Microchip comparator family option, but its exact input offset, response-time, and temperature specifications should be checked in its manufacturer datasheet before interchangeability is assumed.
What is the difference between MCP6549-E/P and MCP6549-E/ST?
The MCP6549-E/P uses a 14-pin PDIP package, while the MCP6549-E/ST uses a 14-pin SOIC package. Both identify the MCP6549 four-channel open-drain comparator family, but their physical footprints are different, so MCP6549-E/ST is not a direct drop-in substitute on an existing PDIP PCB. Existing boards should retain the E/P package unless the layout and assembly method are redesigned.
When should I choose MCP6549-E/P over MCP6549-E/ST?
Choose MCP6549-E/P for through-hole assemblies, prototypes assembled on perforated boards, or legacy boards that already use the 14-pin PDIP footprint. Choose MCP6549-E/ST for surface-mount production when a 14-pin SOIC footprint has already been designed and qualified. The functional comparator family is similar, but PCB compatibility is the decisive selection criterion.
Is MCP6549-E/P suitable for battery-powered monitoring?
Yes, the MCP6549-E/P is suitable for battery-powered monitoring because its 1.6 V minimum supply voltage and 600 nA typical quiescent current support low-power operation. The four comparison channels can monitor multiple thresholds without requiring four separate comparator packages. For an energy budget, include comparator current, pull-up resistor current, and the load connected to each open-drain output.
What can replace MCP6549-E/P?
The closest documented replacement path is within the Microchip MCP6549 family, particularly another 14-pin PDIP ordering code with matching electrical requirements. MCP6549-E/ST has similar comparator functionality but uses a 14-pin SOIC, so it is not a physical drop-in replacement. Confirm pin functions, input thresholds, propagation delay, operating temperature, and output ratings in the candidate's datasheet before approving a substitution.
What is the best Microchip equivalent for MCP6549-E/P?
The best Microchip equivalent is the closest MCP6549-series device supplied in the same 14-pin PDIP configuration and specified for the same electrical conditions. The MCP6549-E/ST is functionally related but requires a 14-pin SOIC footprint and therefore is not a board-level drop-in replacement. Engineers should use the exact ordering code, package drawing, pin table, and electrical characteristics to identify an approved alternative.
Where to download the MCP6549-E/P datasheet PDF?
The manufacturer MCP6549 product page is the authoritative starting point for the MCP6549-E/P datasheet and ordering information. Open the product documentation section to obtain the current PDF and verify the 14-pin PDIP pin description table. Using the manufacturer document also ensures that package, temperature, electrical-limit, and ordering details correspond to the exact device revision.
Where to find the MCP6549-E/P pinout?
The MCP6549-E/P pinout is found in the pin-description and package-drawing sections of the Microchip MCP6549 manufacturer datasheet. Use that table when assigning inputs, outputs, supply, and ground for the 14-pin PDIP. Because MCP6549-E/ST uses the same 14-pin count in a different package, its physical pin placement must not be substituted for the PDIP drawing.
What are the key specifications of MCP6549-E/P that engineers should know?
The MCP6549-E/P combines four general-purpose comparator channels, a 1.6 V to 5.5 V supply range, rail-to-rail inputs, and open-drain CMOS outputs in a 14-pin PDIP package. According to the Microchip product information, typical quiescent current is 600 nA, maximum quiescent current is 1 µA, and the output is 10 V capable. External pull-up resistors are required to establish a high output voltage.

Data referensi engineering untuk MCP6549-E/P — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose MCP6549-E/P when the board uses a 14-pin PDIP footprint and the design needs four low-power, open-drain comparison channels over a 1.6 V to 5.5 V supply. Its 600 nA typical quiescent current is particularly useful for battery-powered or always-on monitoring. MCP6546-E/P is a documented comparable Microchip family candidate, but its complete threshold, timing, temperature, and supply specifications should be matched against the original design. MCP6548-E/P offers another same-package family route, while MCP6549-I/P is appropriate when its ordering-code temperature grade matches the application. MCP6549-E/ST is functionally related but is not a physical drop-in replacement because it uses a 14-pin SOIC package. For any substitution, verify the pin table, input common-mode limits, output ratings, propagation delay, and temperature range rather than relying only on the comparator count and package pin count.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini MCP6546-E/P MCP6548-E/P MCP6549-I/P
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 14-pin PDIP 14-pin PDIP 14-pin PDIP 14-pin PDIP
Comparator Elements 4 channels 4 channels 4 channels 4 channels

Diferensiator Kunci

  • Four independent comparator channels in one package (vsMCP6549-I/P)
  • Low 1.6 V minimum supply voltage (vsMCP6546-E/P)
  • Ultra-low continuous power overhead (vsMCP6548-E/P)

Catatan Desain

Every MCP6549-E/P open-drain output requires an external pull-up resistor to establish a high logic level. Select the resistor to satisfy the downstream input's current and rise-time requirements while keeping continuous power dissipation acceptable. A low pull-up resistance produces faster transitions but increases supply current; a high resistance reduces loading but can slow edges and increase susceptibility to noise coupling.

Place the pull-up resistors close to the MCP6549-E/P output pins and route each output as a short trace. Keep the input traces away from pull-up current paths, switching inductors, and high-current LED or motor drivers. Use a continuous ground plane and connect the comparator ground reference directly to the quiet return path so input threshold decisions are not shifted by ground current.

A slow input crossing near the comparison threshold can cause repeated output transitions even with low comparator quiescent current. Add suitable source filtering or positive feedback hysteresis after evaluating the sensor's noise and response requirements. The added components must preserve the intended threshold accuracy and should be validated across input slew rate, supply voltage, and temperature.

Informasi Konformitas

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The MCP6549-E/P is identified as RoHS compliant. No additional REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status is established by the cited product information.

Data disahkan pada: 2026-11-15 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

MCP6549-E/P datasheet MCP6549-E/P pinout MCP6549-E/P datasheet pdf Microchip MCP6549-E/P MCP6549-E/P equivalent MCP6549-E/P replacement MCP6549-E/P cross reference MCP6549-E/P vs MCP6549-E/ST MCP6549-E/P 14-pin PDIP MCP6549 1.6V comparator MCP6549-E/P price MCP6549-E/P stock MCP6549-E/P application circuit

Komponen dan Istilah Terkait

Microchip Technology MCP6549-E/P MCP6549 MCP6546-E/P MCP6548-E/P MCP6549-I/P MCP6549-E/ST Voltage comparator Analog comparator Comparator IC Interface IC Amplifier IC Semiconductor Open-drain output Rail-to-rail input CMOS TTL-compatible Single-ended operation Quiescent current Supply voltage Common-mode range 14-pin PDIP PDIP package Through-hole mounting RoHS
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ