MCP6549-E/P - 4-Comparator, 1.6-5.5V Open-Drain IC | Microchip
N.º de pieza: MCP6549-E/P ✓ ActivoMCP6549-E/P Descripción general
A voltage comparator is an analog integrated circuit that compares two input voltages and produces a logic-level indication of their relationship. The MCP6549 belongs to the comparator hierarchy within analog and mixed-signal semiconductors, alongside interface ICs and amplifier ICs. Its four independent comparison channels can monitor four thresholds, conditions, or signals, reducing the number of discrete comparator packages required on a densely populated board.
The key features of the MCP6549-E/P include four general-purpose comparator elements, single-ended operation, rail-to-rail input behavior, and CMOS-compatible open-drain outputs. Its 1.6 V minimum supply voltage supports low-energy designs, while the 5.5 V maximum supply voltage covers common 3.3 V and 5 V systems. The typical 600 nA quiescent current is particularly useful when battery life is governed by continuously powered sensing or monitoring circuitry.
The open-drain architecture provides a flexible output arrangement because each output can pull low when the comparison condition is met but remains high impedance when inactive. A pull-up resistor establishes the high output level and allows the open-drain pins to be used in wired logic arrangements. The manufacturer describes the outputs as 10 V capable, which supports interface use beyond the nominal supply voltage when suitable external pull-up and circuit conditions are observed.
Typical uses include battery threshold detection, sensor-signal conditioning, industrial control interfaces, portable measurement equipment, and digital control systems. The four-channel organization is particularly useful when monitoring multiple supply rails, comparing several sensor outputs against common limits, or creating independent control decisions within one package. The low quiescent current supports always-on monitoring without imposing unnecessary continuous-load overhead.
When laying out the circuit, route each comparator input away from switching nodes and pull-up currents to minimize displacement errors near the decision threshold. Place output pull-up resistors close to the relevant open-drain pins, and use the package ground connection as the return path for both input signals and pull-up current. Check the operating limits for all input, output, and supply pins before applying signals that exceed the common-mode range.
This product page combines the manufacturer device information with package-focused engineering guidance, drop-in family options, comparison parameters, application examples, and practical layout considerations. It is intended to help engineers identify the correct device and integrate it without overlooking the open-drain pull-up requirements, low-voltage operating limits, or multi-channel routing considerations.
Alternativas directas para MCP6549-E/P — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con MCP6549-E/P (mismo factor de forma y huella) — difiere en Comparator Type, Logic Compatibility, Maximum Quiescent Current, Output Type.
MCP6546-E/P
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
MCP6548-E/P
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
MCP6549-I/P
✅ Sustitución directa ⚠️ Especificaciones sin verificarConsulte el precio
Ver hoja de datos →MCP6549-E/P Valores máximos y características eléctricas
| Comparator Type | General-purpose voltage comparator |
| Number of Comparator Elements | 4 channels |
| Supply Voltage Range | 1.6 V to 5.5 V |
| Typical Quiescent Current | 600 nA |
| Maximum Quiescent Current | 1 µA |
| Tipo de salida | Open-drain CMOS output |
| Input Common-Mode Range | Rail-to-rail |
| Maximum Output Voltage Capability | 10 V |
| Logic Compatibility | TTL-compatible |
| Comparator Configuration | Single-ended |
| Encapsulado | 14-pin PDIP |
| Package Pitch | 7.62 mm |
| Package Body Width | 0.300 in (7.62 mm) |
| Tipo de montaje | Through-hole |
| Estado RoHS | Compliant |
Guía de configuración de pines de MCP6549-E/P 0.300 in (7.62 mm)
Configuración de pines para MCP6549-E/P (encapsulado 0.300 in (7.62 mm)). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.
No hay datos detallados de patillaje disponibles para MCP6549-E/P.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
MCP6549-E/P es adecuado para 6 aplicacións: Battery Threshold Detection, Industrial Sensor Signal Conditioning, Portable Measurement Equipment, Power Rail Supervision, Smart Home Sensor Nodes, LED Lighting Control.
Battery Threshold Detection
The MCP6549-E/P fits battery-powered threshold detection because it accepts a 1.6 V to 5.5 V supply and consumes only 600 nA typical quiescent current, with a 1 µA maximum. Four channels can independently compare sensed inputs against reference thresholds and report each decision through an open-drain output. Use a pull-up resistor to establish the logic-high state, and account for its continuous current in the battery budget. The low-voltage range is suitable for single-cell and energy-harvesting front ends, while the four-channel organization reduces the number of packages required for multiple battery conditions.
Recomendado
Industrial Sensor Signal Conditioning
The MCP6549-E/P is suitable for conditioning several industrial sensor outputs against independent limits. Its four rail-to-rail comparison channels reduce component count when monitoring temperature, pressure, proximity, or analog control signals, and the open-drain outputs can directly drive transistor-enabled alert or interlock stages. The 1.6 V minimum operating voltage supports compact sensor nodes. A pull-up resistor defines the inactive state, while the 10 V output capability offers additional interface flexibility when the external pull-up and device operating limits are respected.
Recomendado
Portable Measurement Equipment
The MCP6549-E/P fits portable measurement instruments where four sensor thresholds must be evaluated while keeping standby power low. A 600 nA typical quiescent current and 1 µA maximum limit the comparator's continuous overhead, making the device appropriate for battery-powered meters and field probes. Rail-to-rail inputs help evaluate signals near the low and high ends of the operating rail. Because the outputs are open drain, use local pull-ups or suitable downstream interfaces and avoid long traces that could increase susceptibility to coupling.
Recomendado
Power Rail Supervision
The MCP6549-E/P can monitor multiple power-related signals in control systems by using its four independent comparator channels. The 1.6 V to 5.5 V operating range permits use in systems built around low-voltage rails, while rail-to-rail inputs support decisions near the supply boundaries. Open-drain outputs can pull down fault-indicator lines or drive an external stage. Include hysteresis or filtering where a monitored signal can cross the threshold slowly, and use the pin-description table to assign supply and ground correctly for the 14-pin PDIP.
Recomendado
Smart Home Sensor Nodes
The MCP6549-E/P is useful in smart-home sensor nodes that need autonomous threshold decisions before a microcontroller becomes active. Four channels can evaluate light, motion, contact, or environmental-sensor outputs, while the 600 nA typical quiescent current supports low standby demand. The open-drain output structure is compatible with pull-up-based digital buses or transistor drivers. Keep the comparator inputs short and separated from switching regulators, and select pull-up values that balance current consumption, rise time, and the voltage requirements of the downstream digital device.
Recomendado
LED Lighting Control
The MCP6549-E/P can support LED lighting and illumination-control circuits by comparing four sensed conditions against reference levels. Rail-to-rail inputs are useful for signals spanning much of the low-voltage operating range, and the open-drain outputs can control suitable transistor stages rather than driving LED current directly. The 1.6 V minimum supply supports low-voltage lighting electronics. Select a pull-up resistor for the required logic speed, provide a current-limiting path for LEDs, and keep comparator inputs away from high-current LED drive traces to minimize switching-induced threshold shifts.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para MCP6549-E/P — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | MCP6546-E/P | MCP6548-E/P | MCP6549-I/P |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 14-pin PDIP | 14-pin PDIP | 14-pin PDIP | 14-pin PDIP |
| Comparator Elements | 4 channels | 4 channels | 4 channels | 4 channels |
Diferenciadores clave
- Four independent comparator channels in one package (frente a MCP6549-I/P)
- Low 1.6 V minimum supply voltage (frente a MCP6546-E/P)
- Ultra-low continuous power overhead (frente a MCP6548-E/P)
Notas de diseño
Every MCP6549-E/P open-drain output requires an external pull-up resistor to establish a high logic level. Select the resistor to satisfy the downstream input's current and rise-time requirements while keeping continuous power dissipation acceptable. A low pull-up resistance produces faster transitions but increases supply current; a high resistance reduces loading but can slow edges and increase susceptibility to noise coupling.
Place the pull-up resistors close to the MCP6549-E/P output pins and route each output as a short trace. Keep the input traces away from pull-up current paths, switching inductors, and high-current LED or motor drivers. Use a continuous ground plane and connect the comparator ground reference directly to the quiet return path so input threshold decisions are not shifted by ground current.
A slow input crossing near the comparison threshold can cause repeated output transitions even with low comparator quiescent current. Add suitable source filtering or positive feedback hysteresis after evaluating the sensor's noise and response requirements. The added components must preserve the intended threshold accuracy and should be validated across input slew rate, supply voltage, and temperature.
Información de cumplimiento
The MCP6549-E/P is identified as RoHS compliant. No additional REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status is established by the cited product information.