MCP6549-E/P - 4-Comparator, 1.6-5.5V Open-Drain IC | Microchip
料号: MCP6549-E/P ✓ 量产中MCP6549-E/P 概述
A voltage comparator is an analog integrated circuit that compares two input voltages and produces a logic-level indication of their relationship. The MCP6549 belongs to the comparator hierarchy within analog and mixed-signal semiconductors, alongside interface ICs and amplifier ICs. Its four independent comparison channels can monitor four thresholds, conditions, or signals, reducing the number of discrete comparator packages required on a densely populated board.
The key features of the MCP6549-E/P include four general-purpose comparator elements, single-ended operation, rail-to-rail input behavior, and CMOS-compatible open-drain outputs. Its 1.6 V minimum supply voltage supports low-energy designs, while the 5.5 V maximum supply voltage covers common 3.3 V and 5 V systems. The typical 600 nA quiescent current is particularly useful when battery life is governed by continuously powered sensing or monitoring circuitry.
The open-drain architecture provides a flexible output arrangement because each output can pull low when the comparison condition is met but remains high impedance when inactive. A pull-up resistor establishes the high output level and allows the open-drain pins to be used in wired logic arrangements. The manufacturer describes the outputs as 10 V capable, which supports interface use beyond the nominal supply voltage when suitable external pull-up and circuit conditions are observed.
Typical uses include battery threshold detection, sensor-signal conditioning, industrial control interfaces, portable measurement equipment, and digital control systems. The four-channel organization is particularly useful when monitoring multiple supply rails, comparing several sensor outputs against common limits, or creating independent control decisions within one package. The low quiescent current supports always-on monitoring without imposing unnecessary continuous-load overhead.
When laying out the circuit, route each comparator input away from switching nodes and pull-up currents to minimize displacement errors near the decision threshold. Place output pull-up resistors close to the relevant open-drain pins, and use the package ground connection as the return path for both input signals and pull-up current. Check the operating limits for all input, output, and supply pins before applying signals that exceed the common-mode range.
This product page combines the manufacturer device information with package-focused engineering guidance, drop-in family options, comparison parameters, application examples, and practical layout considerations. It is intended to help engineers identify the correct device and integrate it without overlooking the open-drain pull-up requirements, low-voltage operating limits, or multi-channel routing considerations.
直接替换替代料: MCP6549-E/P ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: MCP6549-E/P (相同外形与封装尺寸) ——差异在于 Comparator Type, Logic Compatibility, Maximum Quiescent Current, Output Type.
MCP6546-E/P
✅ 直接替换📋 参考替代料(不在目录中)
MCP6548-E/P
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
MCP6549-I/P
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →MCP6549-E/P 最大额定值与电气特性
| Comparator Type | General-purpose voltage comparator |
| Number of Comparator Elements | 4 channels |
| Supply Voltage Range | 1.6 V to 5.5 V |
| Typical Quiescent Current | 600 nA |
| Maximum Quiescent Current | 1 µA |
| 输出类型 | Open-drain CMOS output |
| Input Common-Mode Range | Rail-to-rail |
| Maximum Output Voltage Capability | 10 V |
| Logic Compatibility | TTL-compatible |
| Comparator Configuration | Single-ended |
| 封装 | 14-pin PDIP |
| Package Pitch | 7.62 mm |
| Package Body Width | 0.300 in (7.62 mm) |
| 安装类型 | Through-hole |
| RoHS 状态 | Compliant |
MCP6549-E/P 0.300 in (7.62 mm) 引脚配置指南
MCP6549-E/P(0.300 in (7.62 mm) 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: MCP6549-E/P.
请参阅 数据手册 以查看完整引脚配置。
典型应用
MCP6549-E/P 适用于 6 应用s: Battery Threshold Detection, Industrial Sensor Signal Conditioning, Portable Measurement Equipment, Power Rail Supervision, Smart Home Sensor Nodes, LED Lighting Control.
Battery Threshold Detection
The MCP6549-E/P fits battery-powered threshold detection because it accepts a 1.6 V to 5.5 V supply and consumes only 600 nA typical quiescent current, with a 1 µA maximum. Four channels can independently compare sensed inputs against reference thresholds and report each decision through an open-drain output. Use a pull-up resistor to establish the logic-high state, and account for its continuous current in the battery budget. The low-voltage range is suitable for single-cell and energy-harvesting front ends, while the four-channel organization reduces the number of packages required for multiple battery conditions.
推荐
Industrial Sensor Signal Conditioning
The MCP6549-E/P is suitable for conditioning several industrial sensor outputs against independent limits. Its four rail-to-rail comparison channels reduce component count when monitoring temperature, pressure, proximity, or analog control signals, and the open-drain outputs can directly drive transistor-enabled alert or interlock stages. The 1.6 V minimum operating voltage supports compact sensor nodes. A pull-up resistor defines the inactive state, while the 10 V output capability offers additional interface flexibility when the external pull-up and device operating limits are respected.
推荐
Portable Measurement Equipment
The MCP6549-E/P fits portable measurement instruments where four sensor thresholds must be evaluated while keeping standby power low. A 600 nA typical quiescent current and 1 µA maximum limit the comparator's continuous overhead, making the device appropriate for battery-powered meters and field probes. Rail-to-rail inputs help evaluate signals near the low and high ends of the operating rail. Because the outputs are open drain, use local pull-ups or suitable downstream interfaces and avoid long traces that could increase susceptibility to coupling.
推荐
Power Rail Supervision
The MCP6549-E/P can monitor multiple power-related signals in control systems by using its four independent comparator channels. The 1.6 V to 5.5 V operating range permits use in systems built around low-voltage rails, while rail-to-rail inputs support decisions near the supply boundaries. Open-drain outputs can pull down fault-indicator lines or drive an external stage. Include hysteresis or filtering where a monitored signal can cross the threshold slowly, and use the pin-description table to assign supply and ground correctly for the 14-pin PDIP.
推荐
Smart Home Sensor Nodes
The MCP6549-E/P is useful in smart-home sensor nodes that need autonomous threshold decisions before a microcontroller becomes active. Four channels can evaluate light, motion, contact, or environmental-sensor outputs, while the 600 nA typical quiescent current supports low standby demand. The open-drain output structure is compatible with pull-up-based digital buses or transistor drivers. Keep the comparator inputs short and separated from switching regulators, and select pull-up values that balance current consumption, rise time, and the voltage requirements of the downstream digital device.
推荐
LED Lighting Control
The MCP6549-E/P can support LED lighting and illumination-control circuits by comparing four sensed conditions against reference levels. Rail-to-rail inputs are useful for signals spanning much of the low-voltage operating range, and the open-drain outputs can control suitable transistor stages rather than driving LED current directly. The 1.6 V minimum supply supports low-voltage lighting electronics. Select a pull-up resistor for the required logic speed, provide a current-limiting path for LEDs, and keep comparator inputs away from high-current LED drive traces to minimize switching-induced threshold shifts.
推荐
推荐产品汇总
工程参考数据: MCP6549-E/P ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | MCP6546-E/P | MCP6548-E/P | MCP6549-I/P |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 14-pin PDIP | 14-pin PDIP | 14-pin PDIP | 14-pin PDIP |
| Comparator Elements | 4 channels | 4 channels | 4 channels | 4 channels |
关键差异点
- Four independent comparator channels in one package (对比 MCP6549-I/P)
- Low 1.6 V minimum supply voltage (对比 MCP6546-E/P)
- Ultra-low continuous power overhead (对比 MCP6548-E/P)
设计说明
Every MCP6549-E/P open-drain output requires an external pull-up resistor to establish a high logic level. Select the resistor to satisfy the downstream input's current and rise-time requirements while keeping continuous power dissipation acceptable. A low pull-up resistance produces faster transitions but increases supply current; a high resistance reduces loading but can slow edges and increase susceptibility to noise coupling.
Place the pull-up resistors close to the MCP6549-E/P output pins and route each output as a short trace. Keep the input traces away from pull-up current paths, switching inductors, and high-current LED or motor drivers. Use a continuous ground plane and connect the comparator ground reference directly to the quiet return path so input threshold decisions are not shifted by ground current.
A slow input crossing near the comparison threshold can cause repeated output transitions even with low comparator quiescent current. Add suitable source filtering or positive feedback hysteresis after evaluating the sensor's noise and response requirements. The added components must preserve the intended threshold accuracy and should be validated across input slew rate, supply voltage, and temperature.
合规信息
The MCP6549-E/P is identified as RoHS compliant. No additional REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status is established by the cited product information.