PIC16F18855-E/ML - 8-bit 32MHz 14KB Flash MCU | Microchip
MPN: PIC16F18855-E/ML ✓ AktifPIC16F18855-E/ML Ringkasan
A PIC microcontroller (MCU) is a compact programmable processor that integrates a CPU, non-volatile Flash memory, RAM, EEPROM, and a rich set of peripherals into a single IC. PIC MCUs use a modified Harvard RISC architecture and are positioned in the broader semiconductor hierarchy as: microcontroller -> embedded processor -> integrated circuit. Microchip's PIC16 mid-range family targets cost-sensitive applications needing deterministic real-time control, low-power sleep modes, and a wide peripheral mix.
Key features of the PIC16F18855 include a 32 MHz internal oscillator, up to 14 KB self-programmable Flash, 1 KB SRAM, 256 B EEPROM, an integrated 10-bit ADC with computation, multiple communication peripherals (I2C, SPI, EUSART), and a rich set of Core Independent Peripherals such as Configurable Logic Cells (CLC), Complementary Waveform Generator (CWG), Numerically Controlled Oscillator (NCO), and Zero-Cross Detect (ZCD). The XLP deep-sleep current is in the nanoampere range, ideal for battery-powered and energy-harvesting designs.
Architecturally, the device uses Microchip's mid-range 16-bit instruction word core with a hardware stack and prioritised interrupt controller. Hardware CIP blocks offload tasks such as waveform synthesis, signal conditioning, and event-driven logic from the CPU, reducing code size and improving responsiveness while keeping active-mode current low.
Typical applications include IoT sensor nodes, home appliances, automotive body and interior modules, consumer electronics, battery-powered instrumentation, LED lighting control, and industrial control panels. The FuSa-ready feature set (CRC/SCAN, HLT, Windowed WDT) supports designs targeting IEC 60730 Class B safety compliance.
When designing with the PIC16F18855-E/ML, populate the CONFIG words from MPLAB X IDE code generation tools and verify the operating voltage window of 2.3 V to 5.5 V matches your power rail. Keep traces to the exposed pad short and stitch vias through the e-pad for thermal and electrical reference.
This page synthesises distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single source for selection and sourcing decisions.
Alternatif penggantian untuk PIC16F18855-E/ML — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian PIC16F18855-E/ML (sama faktor bentuk dan footprint) — berbeda di dalam Package, ADC, Operating Temperature, Core Architecture, Timers.
PIC16F18855-I/ML
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC16F18855-E/MV
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
PIC16F18854-I/ML
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC16F1829-I/ML
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC16F18855-E/ML Rating Maksimal & Karakteristik Listrik
| Product Family | PIC16F1885X / PIC16F1887X |
| Core Architecture | PIC16 8-bit mid-range |
| CPU Speed (max) | 32 MHz |
| Program Memory (Flash) | 14 KB (8K x 14 words) |
| Data SRAM | 1 KB |
| Data EEPROM | 256 B |
| Operating Voltage | 2.3 V to 5.5 V |
| Suhu Kerja | -40 C to +125 C (E suffix) |
| ADC | 10-bit, integrated |
| Paket | 28-QFN (6x6 mm) with exposed pad |
| Tipe Mounting | Surface Mount |
| Low-Power Technology | eXtreme Low Power (XLP) |
| Functional Safety | FuSa (CRC/SCAN, HLT, Windowed WDT) |
| Communication Peripherals | EUSART, I2C, SPI |
| Core Independent Peripherals | CLC, CWG, NCO, ZCD |
| Status RoHS | Compliant |
Konfigurasi Pin PIC16F18855-E/ML
| Pin produk 1 | RA2 — Bidirectional I/O / analog / CWG |
| Pin produk 2 | RA3 — Bidirectional I/O / analog / reference |
| Pin produk 3 | RA4 — Bidirectional I/O / analog / ZCD |
| Pin produk 4 | RA5 — Bidirectional I/O / analog / CLC |
| Pin produk 5 | RA6 — Bidirectional I/O / analog |
| Pin produk 6 | RA7 — Bidirectional I/O / analog |
| Pin produk 7 | VDD — Positive supply (2.3 V to 5.5 V) |
| Pin produk 8 | VSS — Ground reference |
| Pin produk 9 | OSC1/RA0 — Crystal oscillator input / GPIO |
| Pin produk 10 | OSC2/RA1 — Crystal oscillator output / GPIO |
| Pin produk 11 | RC0 — Bidirectional I/O / analog / PWM |
| Pin produk 12 | RC1 — Bidirectional I/O / analog / PWM |
| Pin produk 13 | RC2 — Bidirectional I/O / analog / PWM |
| Pin produk 14 | RC3 — Bidirectional I/O / analog / SCL |
| Pin produk 15 | RC4 — Bidirectional I/O / analog / SDA |
| Pin produk 16 | RC5 — Bidirectional I/O / analog |
| Pin produk 17 | RC6 — Bidirectional I/O / TX |
| Pin produk 18 | RC7 — Bidirectional I/O / RX |
| Pin produk 19 | RB0 — Bidirectional I/O / interrupt-on-change |
| Pin produk 20 | RB1 — Bidirectional I/O / interrupt-on-change |
| Pin produk 21 | RB2 — Bidirectional I/O / interrupt-on-change |
| Pin produk 22 | RB3 — Bidirectional I/O / interrupt-on-change |
| Pin produk 23 | RB4 — Bidirectional I/O / interrupt-on-change |
| Pin produk 24 | RB5 — Bidirectional I/O / interrupt-on-change |
| Pin produk 25 | RB6 — Bidirectional I/O / ICSCLK |
| Pin produk 26 | RB7 — Bidirectional I/O / ICSDA |
| Pin produk 27 | VDD — Positive supply (2.3 V to 5.5 V) |
| Pin produk 28 | VSS — Ground reference |
Aplikasi Umum
PIC16F18855-E/ML cocok untuk 6 aplikasis: Battery-Powered IoT Sensor Nodes, Home Appliance Control Boards, Automotive Body and Interior Modules, LED Lighting Drivers and Dimming, Industrial Control Panels and HMI, Consumer Electronics Remote Controls.
Battery-Powered IoT Sensor Nodes
The PIC16F18855-E/ML fits IoT sensor nodes because its XLP deep-sleep current is in the nanoampere range, allowing the node to sleep for the bulk of every duty cycle while a sensor is sampled every few seconds. The 14 KB Flash holds the LoRaWAN or BLE protocol stack plus the application, and the Core Independent Peripherals (CLC, NCO, CWG) offload pulse counting and waveform generation without waking the CPU. In a typical 3.6 V Li-SOCl2 application, average current drops below 5 uA, enabling multi-year battery life.
Direkomendasikan
Home Appliance Control Boards
The PIC16F18855-E/ML is a strong fit for washing machines, dishwashers, and microwave ovens where it must drive relays, read triac zero-crossing, and time motor sequences. The Zero-Cross Detect (ZCD) peripheral synchronises with the AC mains, the Complementary Waveform Generator (CWG) drives half-bridges, and the 10-bit ADC reads temperature and level sensors. The Functional Safety peripherals (CRC/SCAN, HLT) simplify IEC 60730 Class B compliance for white goods.
Direkomendasikan
Automotive Body and Interior Modules
The PIC16F18855-E/ML operates over -40 C to +125 C, which matches the AEC-Q100 temperature window for body-control modules such as seat controllers, mirror adjusters, and ambient lighting drivers. Its LIN-compatible EUSART can talk to vehicle networks via an external transceiver, while the Windowed Watchdog Timer and CRC/SCAN features help meet functional safety requirements for body electronics. The compact 6x6 mm QFN saves board space inside tight cluster modules.
Direkomendasikan
LED Lighting Drivers and Dimming
The PIC16F18855-E/ML drives LED lighting by combining the Complementary Waveform Generator (CWG) for high-frequency PWM dimming with the Zero-Cross Detect (ZCD) for triac-compatible phase-cut dimming. The 10-bit ADC reads colour-mix sensors for tunable-white or RGB feedback loops. The 14 KB Flash accommodates DMX-512 or DALI frame decoders, while the CLC block performs combinatorial logic for fault detection without waking the CPU.
Direkomendasikan
Industrial Control Panels and HMI
The PIC16F18855-E/ML is ideal for industrial HMI sub-panels and small PLC I/O cards where it must read push buttons and rotary encoders, drive segment LCDs or small TFT displays, and communicate over RS-485. The EUSART plus DMA-fed buffering keeps the CPU free for higher-level protocol handling. The extended temperature range and the Functional Safety peripherals suit rugged factory environments.
Direkomendasikan
Consumer Electronics Remote Controls
The PIC16F18855-E/ML powers IR and RF remote controls where battery life and PCB area dominate. The Numerically Controlled Oscillator (NCO) generates accurate carrier frequencies for IR transmission, while the CWG produces the modulated waveform, all without consuming CPU cycles. The wide 2.3 V to 5.5 V supply range lets the design run from a single CR2032 coin cell. Low sleep current keeps standby drain below 1 uA, extending battery life to multiple years.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk PIC16F18855-E/ML — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | PIC16F18855-I/ML | PIC16F18855-E/MV | PIC16F18854-I/ML | PIC16F1829-I/ML |
|---|---|---|---|---|---|
| Package | 28-QFN (6x6) | 28-QFN (6x6) - same | 28-QFN (6x6) - same | 28-QFN (6x6) - same | 28-QFN (6x6) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 14 KB | 14 KB | 14 KB | 7 KB | 8 KB |
| SRAM | 1 KB | 1 KB | 1 KB | 512 B | 1 KB |
| EEPROM | 256 B | 256 B | 256 B | 256 B | 256 B |
| Operating Temperature | -40 C to +125 C | -40 C to +85 C | -40 C to +125 C | -40 C to +85 C | -40 C to +85 C |
| Core Independent Peripherals | CLC, CWG, NCO, ZCD | CLC, CWG, NCO, ZCD | CLC, CWG, NCO, ZCD | CLC, CWG, NCO, ZCD | Limited (no CLC/NCO/CWG) |
| Functional Safety | Yes (CRC/SCAN, HLT, WWDT) | Yes (CRC/SCAN, HLT, WWDT) | Yes (CRC/SCAN, HLT, WWDT) | Yes (CRC/SCAN, HLT, WWDT) | Limited |
| Unit Price @1000 (USD, as of 2026-09-20) | 0.84 | 0.79 (lower - industrial grade) | 0.85 (same) | 0.76 | 0.69 |
Diferensiator Kunci
- Extended temperature grade for harsh environments (vsPIC16F18855-I/ML)
- Modern CIP feature set (vsPIC16F1829-I/ML)
- More Flash in same footprint (vsPIC16F18854-I/ML)
Catatan Desain
For the PIC16F18855-E/ML 28-QFN (6x6) package, expose the e-pad on the PCB and stitch at least 9 thermal vias (0.3 mm drill, 0.5 mm pitch) through to the inner ground plane. This dissipates up to 0.5 W of internal dissipation and ensures a stable thermal reference. Place a 10 nF + 1 uF + 10 uF decoupling capacitor cluster within 2 mm of each VDD pin, with the smallest cap closest to the IC pin.
Do not leave the ICSPCLK and ICSPDAT pins (RB6/RB7) floating in production; they are sensitive to noise and can unintentionally enter programming mode. Add a 10 kohm pull-up to RB7 and a 10 kohm pull-down to RB6 if no ICSP header is fitted. Also, configure the CONFIG words in code using #pragma config, not by relying on MPLAB X IDE defaults, so that the Brown-out Reset, Watchdog, and LVP bits are always set correctly.
Use the XLP sleep modes (DOZE, SLEEP, IDLE_A, IDLE_B) combined with Peripheral Module Disable (PMD) to drop the active current of the PIC16F18855-E/ML below 50 uA/MHz and the deep-sleep current below 100 nA. Enable the Peripheral Interrupt Controllers in sleep mode and wake the CPU only on a timer, ADC threshold, or external interrupt from the CLC. This pattern typically yields 90 percent energy savings on duty-cycled battery-powered designs.
Informasi Konformitas
RoHS and lead-free compliant per Microchip product page. AEC-Q100 not listed; extended temperature grade supports -40C to +125C but is not a formal automotive qualification.
