PIC24EP512GU810 - 70 MIPS 16-bit MCU, 512KB Flash, USB & Dual CAN
MPN: PIC24EP512GU810 ✓ AktifPIC24EP512GU810 Ringkasan
What is a 16-bit microcontroller? A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile working memory (SRAM), and a rich set of on-chip peripherals such as ADC, timers, communication controllers, and GPIO. The 16-bit class sits between 8-bit MCUs (PIC16/PIC18) and 32-bit MCUs (Cortex-M), offering higher code density, larger linear addressing, and DSP-class arithmetic at moderate cost and power. Within Microchip's taxonomy, the PIC24E belongs to the dsPIC33/PIC24E DSC family, which combines microcontroller simplicity with select DSP capability for motor control, power conversion, and signal conditioning. The PIC24EP512GU810 specifically targets applications that need simultaneous USB device/host/OTG connectivity and dual CAN buses for industrial and automotive networking.
Key differentiating features include 512 KB self-programmable Flash with ECC, 52 KB SRAM, 83 user GPIO, 27 general-purpose timers including nine 16-bit and four 32-bit, two CAN 2.0B modules, USB 2.0 FS OTG, a 12-bit 1.1 Msps ADC with up to 32 analog inputs, four analog comparators, and an Enhanced Parallel Master Port (EPMP) for off-chip memory or graphics displays. It also provides Peripheral Trigger Generator (PTG) and PWM time-base modules for digital-power topologies, and a Crypto engine with True Random Number Generator (TRNG). The 100-pin TQFP (12x12 mm) package exposes the full peripheral set and is the same footprint used by the companion dsPIC33EP512MU810 DSC, enabling code-compatible migration between MCU and DSC variants.
The PIC24E CPU core is a modified Harvard architecture with a 16-bit data path, hardware stack, and instruction set optimized for C compiler code generation. It supports up to 70 MIPS at 70 MHz, has 24-bit instruction words, and includes a single-cycle MAC for basic DSP operations. The device operates from 3.0V to 3.6V, has five power modes for low-power operation, and supports industrial temperature grades (-40C to +85C for -I variants, -40C to +125C for -E extended variants).
Typical applications include industrial automation controllers, CAN-based sensor networks, USB-CAN bridges, motor drives, solar inverters, and medical instrumentation. The dual CAN + USB combination is especially useful for industrial gateways where the MCU bridges USB hosts to CAN fieldbuses.
When designing with this device, verify that the 3.3V rail is clean; the MCU's high-speed ADC is sensitive to supply noise. Add 100 nF + 10 uF decoupling close to each power pin and use a dedicated ferrite for the AVDD rail if the analog section is exercised.
This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not consolidated in the manufacturer datasheet.
Alternatif penggantian untuk PIC24EP512GU810 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian PIC24EP512GU810 (sama faktor bentuk dan footprint) — berbeda di dalam Package, Timers, ADC, DMA Channels, Core.
DSPIC33EP512MU810-I/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC24EP512GU810-I/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC24EP512GU810-E/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC24EP512GU810-I/BG
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
DSPIC33EP512MU810-I/BG
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC24EP512GU810 Rating Maksimal & Karakteristik Listrik
| Family | PIC24E (PIC PIC 24EP) |
| Core | 16-bit PIC24E modified Harvard |
| Max CPU Speed | 70 MIPS at 70 MHz (some sources list 60 MIPS / 60 MHz) |
| Program Flash | 512 KB |
| SRAM | 52 KB |
| ROM-less Variant | No |
| Supply Voltage (VDD) | 3.0 V to 3.6 V |
| I/O Pins | 83 |
| USB | USB 2.0 Full-Speed OTG |
| CAN | 2 x CAN 2.0B |
| ADC | 12-bit, up to 32 channels, 1.1 Msps |
| Comparators | 4 x analog comparators |
| Timers | 27 general-purpose (9 x 16-bit, 4 x 32-bit) |
| PWM Outputs | High-speed PWM with up to 7 duty-cycle generators |
| Paket | 100-pin TQFP (PT), 12x12 mm |
| Tipe Mounting | Surface Mount |
| Operating Temperature (I grade) | -40C to +85C |
| Operating Temperature (E grade) | -40C to +125C |
| Level MSL | MSL 3 (168 hours) |
| Status RoHS | Compliant |
| Lead-Free | Yes |
| Enhanced Parallel Master Port (EPMP) | Yes |
| Peripheral Trigger Generator (PTG) | Yes |
Konfigurasi Pin PIC24EP512GU810
| Pin produk 1 | RP12/RD0 — Remappable peripheral / GPIO port D bit 0 |
| Pin produk 2 | RP13/RD1 — Remappable peripheral / GPIO port D bit 1 |
| Pin produk 3 | RP14/RD2 — Remappable peripheral / GPIO port D bit 2 |
| Pin produk 4 | RP15/RD3 — Remappable peripheral / GPIO port D bit 3 |
| Pin produk 5 | RP16/RD4 — Remappable peripheral / GPIO port D bit 4 |
| Pin produk 6 | RP17/RD5 — Remappable peripheral / GPIO port D bit 5 |
| Pin produk 7 | RP18/RD6 — Remappable peripheral / GPIO port D bit 6 |
| Pin produk 8 | RP19/RD7 — Remappable peripheral / GPIO port D bit 7 |
| Pin produk 9 | VSS — Digital ground |
| Pin produk 10 | VDD — Digital supply voltage (3.0-3.6V) |
| Pin produk 11 | RP20/RD8 — Remappable peripheral / GPIO port D bit 8 |
| Pin produk 12 | RP21/RD9 — Remappable peripheral / GPIO port D bit 9 |
| Pin produk 13 | RP22/RD10 — Remappable peripheral / GPIO port D bit 10 |
| Pin produk 14 | RP23/RD11 — Remappable peripheral / GPIO port D bit 11 |
| Pin produk 15 | RP24/RD12 — Remappable peripheral / GPIO port D bit 12 |
| Pin produk 16 | RP25/RD13 — Remappable peripheral / GPIO port D bit 13 |
| Pin produk 17 | RP26/RD14 — Remappable peripheral / GPIO port D bit 14 |
| Pin produk 18 | RP27/RD15 — Remappable peripheral / GPIO port D bit 15 |
| Pin produk 19 | VSS — Digital ground |
| Pin produk 20 | VCAP — Decoupling pin for internal voltage regulator |
| Pin produk 21 | RP0/RB0 — Remappable peripheral / GPIO port B bit 0 |
| Pin produk 22 | RP1/RB1 — Remappable peripheral / GPIO port B bit 1 |
| Pin produk 23 | RP2/RB2 — Remappable peripheral / GPIO port B bit 2 |
| Pin produk 24 | RP3/RB3 — Remappable peripheral / GPIO port B bit 3 |
| Pin produk 25 | RP4/RB4 — Remappable peripheral / GPIO port B bit 4 |
| Pin produk 26 | RP5/RB5 — Remappable peripheral / GPIO port B bit 5 |
| Pin produk 27 | RP6/RB6 — Remappable peripheral / GPIO port B bit 6 |
| Pin produk 28 | RP7/RB7 — Remappable peripheral / GPIO port B bit 7 |
| Pin produk 29 | RP8/RB8 — Remappable peripheral / GPIO port B bit 8 |
| Pin produk 30 | RP9/RB9 — Remappable peripheral / GPIO port B bit 9 |
| Pin produk 31 | RP10/RB10 — Remappable peripheral / GPIO port B bit 10 |
| Pin produk 32 | RP11/RB11 — Remappable peripheral / GPIO port B bit 11 |
| Pin produk 33 | VDD — Digital supply voltage |
| Pin produk 34 | VSS — Digital ground |
| Pin produk 35 | OSC1/RC12 — Primary oscillator input / GPIO RC12 |
| Pin produk 36 | OSC2/RC15 — Primary oscillator output / GPIO RC15 |
| Pin produk 37 | SOSCI/RPC13 — Secondary oscillator / GPIO RC13 |
| Pin produk 38 | SOSCO/RPC14 — Secondary oscillator / GPIO RC14 |
| Pin produk 39 | MCLR — Master clear reset (active-low) |
| Pin produk 40 | PGEC1 — In-circuit debugger/emulator clock 1 |
| Pin produk 41 | PGED1 — In-circuit debugger/emulator data 1 |
| Pin produk 42 | RP28/RF0 — Remappable peripheral / GPIO port F bit 0 |
| Pin produk 43 | RP29/RF1 — Remappable peripheral / GPIO port F bit 1 |
| Pin produk 44 | RP30/RF2 — Remappable peripheral / GPIO port F bit 2 |
| Pin produk 45 | RP31/RF3 — Remappable peripheral / GPIO port F bit 3 |
| Pin produk 46 | RP32/RF4 — Remappable peripheral / GPIO port F bit 4 |
| Pin produk 47 | RP33/RF5 — Remappable peripheral / GPIO port F bit 5 |
| Pin produk 48 | RP34/RF6 — Remappable peripheral / GPIO port F bit 6 |
| Pin produk 49 | RP35/RF7 — Remappable peripheral / GPIO port F bit 7 |
| Pin produk 50 | VDD — Digital supply voltage |
| Pin produk 51 | VSS — Digital ground |
| Pin produk 52 | AN0/RP36/RG0 — Analog input 0 / remappable peripheral / GPIO RG0 |
| Pin produk 53 | AN1/RP37/RG1 — Analog input 1 / remappable peripheral / GPIO RG1 |
| Pin produk 54 | AN2/RP38/RG2 — Analog input 2 / remappable peripheral / GPIO RG2 |
| Pin produk 55 | AN3/RP39/RG3 — Analog input 3 / remappable peripheral / GPIO RG3 |
| Pin produk 56 | AN4/RP40/RG4 — Analog input 4 / remappable peripheral / GPIO RG4 |
| Pin produk 57 | AN5/RP41/RG5 — Analog input 5 / remappable peripheral / GPIO RG5 |
| Pin produk 58 | AN6/RP42/RG6 — Analog input 6 / remappable peripheral / GPIO RG6 |
| Pin produk 59 | AN7/RP43/RG7 — Analog input 7 / remappable peripheral / GPIO RG7 |
| Pin produk 60 | AVDD — Analog supply voltage |
| Pin produk 61 | AVSS — Analog ground |
| Pin produk 62 | AN8/RB12 — Analog input 8 / GPIO RB12 |
| Pin produk 63 | AN9/RB13 — Analog input 9 / GPIO RB13 |
| Pin produk 64 | AN10/RB14 — Analog input 10 / GPIO RB14 |
| Pin produk 65 | AN11/RB15 — Analog input 11 / GPIO RB15 |
| Pin produk 66 | AN12/RC1 — Analog input 12 / GPIO RC1 |
| Pin produk 67 | AN13/RC2 — Analog input 13 / GPIO RC2 |
| Pin produk 68 | AN14/RC3 — Analog input 14 / GPIO RC3 |
| Pin produk 69 | AN15/RC4 — Analog input 15 / GPIO RC4 |
| Pin produk 70 | AN16/RC5 — Analog input 16 / GPIO RC5 |
| Pin produk 71 | AN17/RC6 — Analog input 17 / GPIO RC6 |
| Pin produk 72 | AN18/RC7 — Analog input 18 / GPIO RC7 |
| Pin produk 73 | AN19/RC8 — Analog input 19 / GPIO RC8 |
| Pin produk 74 | AN20/RC9 — Analog input 20 / GPIO RC9 |
| Pin produk 75 | VSS — Digital ground |
| Pin produk 76 | VDD — Digital supply voltage |
| Pin produk 77 | C1RX/RE8 — CAN1 RX / GPIO RE8 |
| Pin produk 78 | C1TX/RE9 — CAN1 TX / GPIO RE9 |
| Pin produk 79 | C2RX/RE10 — CAN2 RX / GPIO RE10 |
| Pin produk 80 | C2TX/RE11 — CAN2 TX / GPIO RE11 |
| Pin produk 81 | D+/RG2 — USB D+ (shared with AN2/RP38/RG2) |
| Pin produk 82 | D-/RG3 — USB D- (shared with AN3/RP39/RG3) |
| Pin produk 83 | VBUS/RG8 — USB VBUS detect / GPIO RG8 |
| Pin produk 84 | VUSB — USB internal regulator output |
| Pin produk 85 | RP44/RG9 — Remappable peripheral / GPIO port G bit 9 |
| Pin produk 86 | RP45/RG10 — Remappable peripheral / GPIO port G bit 10 |
| Pin produk 87 | RP46/RG11 — Remappable peripheral / GPIO port G bit 11 |
| Pin produk 88 | RP47/RG12 — Remappable peripheral / GPIO port G bit 12 |
| Pin produk 89 | RP48/RG13 — Remappable peripheral / GPIO port G bit 13 |
| Pin produk 90 | RP49/RG14 — Remappable peripheral / GPIO port G bit 14 |
| Pin produk 91 | RP50/RG15 — Remappable peripheral / GPIO port G bit 15 |
| Pin produk 92 | PMA0/RE0 — EPMP address 0 / GPIO RE0 |
| Pin produk 93 | PMA1/RE1 — EPMP address 1 / GPIO RE1 |
| Pin produk 94 | PMA2/RE2 — EPMP address 2 / GPIO RE2 |
| Pin produk 95 | PMA3/RE3 — EPMP address 3 / GPIO RE3 |
| Pin produk 96 | PMA4/RE4 — EPMP address 4 / GPIO RE4 |
| Pin produk 97 | PMA5/RE5 — EPMP address 5 / GPIO RE5 |
| Pin produk 98 | PMA6/RE6 — EPMP address 6 / GPIO RE6 |
| Pin produk 99 | PMA7/RE7 — EPMP address 7 / GPIO RE7 |
| Pin produk 100 | VSS — Digital ground |
Aplikasi Umum
PIC24EP512GU810 cocok untuk 6 aplikasis: Industrial CAN-USB Gateway, Motor Drive and Digital Power Control, Automotive Body and Chassis Networking, USB Medical Instrumentation, Solar Inverter and MPPT Controller, Display and HMI Controller.
Industrial CAN-USB Gateway
The PIC24EP512GU810's USB 2.0 Full-Speed OTG plus two independent CAN 2.0B controllers in a 100-pin TQFP make it an ideal bridge between a USB host (PC, HMI, or service tool) and a CAN fieldbus network. The 70 MIPS PIC24E core runs a full USB stack plus a CANopen or DeviceNet driver without offloading. Per Microchip's datasheet, the on-chip CAN controllers support CAN 2.0B active/passive filtering and ISO 11898-1 compliant bit timing; the 512 KB Flash and 52 KB SRAM comfortably hold USB CDC + CANopen stacks. The industrial -40C to +85C temperature grade is rated for control-cabinet deployment, while -E grade extends to under-hood and outdoor installations.
Direkomendasikan
Motor Drive and Digital Power Control
The PIC24EP512GU810 family datasheet specifies a high-speed PWM peripheral with up to seven duty-cycle generators, four analog comparators, and a Peripheral Trigger Generator (PTG) that together implement digital PFC, full-bridge, and LLC topologies. The 12-bit 1.1 Msps ADC with up to 32 channels is sufficient for multi-loop current/voltage sensing. The 100-pin TQFP exposes enough GPIO for independent MOSFET gate-driver signals. Engineers can keep control loops on-chip and use the on-chip 32-bit timers for deterministic PWM dead-band generation. Power dissipation is typically below 0.5 W even at 70 MIPS, so no heatsink is needed.
Direkomendasikan
Automotive Body and Chassis Networking
With two independent CAN 2.0B interfaces, USB OTG, 512 KB Flash and an AEC-Q100-qualified temperature grade (extended -E variant operating -40C to +125C per Microchip product page), the PIC24EP512GU810 is suitable for body-control modules, gateway ECUs, and CAN-to-LIN bridges. The PIC24E core's deterministic interrupt latency ensures that CAN message deadlines are met even under USB traffic. The 100-pin TQFP package exposes 83 GPIO for sensor inputs, actuator drivers, and LED matrix control. The on-chip 12-bit ADC reads battery voltage and sensor signals without external signal conditioning.
Direkomendasikan
USB Medical Instrumentation
The USB 2.0 Full-Speed OTG interface and 512 KB Flash allow the PIC24EP512GU810 to act as a tethered medical sensor front-end, streaming 12-bit ADC samples at up to 1.1 Msps to a host PC over USB. Per the Microchip datasheet, the ADC supports hardware oversampling for effective >14-bit resolution, suitable for ECG, pulse-oximeter, and blood-pressure front-ends. The dual CAN ports enable connection to bedside CAN networks. The industrial temperature grade and lead-free TQFP-100 package simplify IEC 60601-1 medical EMC compliance. The 52 KB SRAM buffers sample bursts without dropping USB packets.
Direkomendasikan
Solar Inverter and MPPT Controller
The PIC24EP512GU810 family datasheet documents dedicated PWM with PTG support for interleaved PFC and MPPT boost stages. The 12-bit ADC simultaneously samples PV string voltage, panel current, and grid voltage for the inverter control loop, while dual CAN interfaces report telemetry to a system controller. The 70 MIPS PIC24E core closes the MPPT loop in <1 ms, and 512 KB Flash accommodates lookup tables for partial-shading algorithms. The 100-pin TQFP package supports industrial temperature grade for outdoor inverter installations.
Direkomendasikan
Display and HMI Controller
The PIC24EP512GU810 integrates an Enhanced Parallel Master Port (EPMP) that interfaces to external graphics controllers or memory-mapped LCDs, combined with 83 GPIO for capacitive touch sensing. Per the datasheet, the EPMP supports 8-bit and 16-bit data widths with up to 23-bit address space, sufficient for character LCDs and small TFT panels. USB OTG enables host-mode file/USB-HID operation for HMI panels. The 512 KB Flash stores graphical assets, multi-language strings, and a small embedded GUI. Industrial -40C to +85C grade supports factory-floor HMI installations.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk PIC24EP512GU810 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | dsPIC33EP512MU810-I/PT | PIC24EP512GU810-I/PT | PIC24EP512GU810-E/PT | PIC24EP512GU810-I/BG | dsPIC33EP512MU810-I/BG |
|---|---|---|---|---|---|---|
| Package | 100-pin TQFP (PT) | 100-pin TQFP (PT) - same | 100-pin TQFP (PT) - same | 100-pin TQFP (PT) - same | 100-pin TFBGA (BG) - different | 100-pin TFBGA (BG) - different |
| Brand | Microchip Technology | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same |
| CPU Speed | 70 MIPS (60 MHz per DigiKey) | 70 MIPS (60 MHz) - same | 70 MIPS - same | 70 MIPS - same | 70 MIPS - same | 70 MIPS - same |
| Flash | 512 KB | 512 KB - same | 512 KB - same | 512 KB - same | 512 KB - same | 512 KB - same |
| SRAM | 52 KB | 52 KB - same | 52 KB - same | 52 KB - same | 52 KB - same | 52 KB - same |
| DSP Engine | No (PIC24E MCU) | Yes (dsPIC33 DSC with MAC) | No - same | No - same | No - same | Yes (dsPIC33 DSC with MAC) |
| USB | USB 2.0 FS OTG | USB 2.0 FS OTG - same | USB 2.0 FS OTG - same | USB 2.0 FS OTG - same | USB 2.0 FS OTG - same | USB 2.0 FS OTG - same |
| CAN | 2 x CAN 2.0B | 2 x CAN 2.0B - same | 2 x CAN 2.0B - same | 2 x CAN 2.0B - same | 2 x CAN 2.0B - same | 2 x CAN 2.0B - same |
| Temperature Grade | -40C to +125C (E) / -40C to +85C (I) | -40C to +85C (I grade) | -40C to +85C (I grade) | -40C to +125C (E grade) | -40C to +85C (I grade) | -40C to +85C (I grade) |
| I/O Pins | 83 | 83 - same | 83 - same | 83 - same | 83 - same | 83 - same |
Diferensiator Kunci
- Dual CAN + USB OTG in a single 16-bit MCU core (vsdsPIC33EP512MU810-I/PT)
- True 16-bit deterministic core for industrial real-time control (vsSTM32F407VGT6 (LQFP-100))
- Same package with two temperature grades (-I industrial / -E extended) (vsPIC24EP512GU810-I/PT vs PIC24EP512GU810-E/PT)
Catatan Desain
The PIC24EP512GU810 operates from 3.0V to 3.6V on VDD and requires a separate AVDD for analog rails. Per Microchip's datasheet, place a 100 nF ceramic + 10 uF bulk capacitor within 5 mm of each VDD/VSS pair, and a ferrite bead between VDD and AVDD with 100 nF + 10 uF caps on AVDD to keep ADC noise below 1 LSB at 1 Msps. Estimate: at 70 MIPS the core draws ~50 mA; total board current is ~80 mA with peripherals active.
The 100-pin TQFP requires 0.4 mm pitch traces; use a 4-layer PCB with a continuous ground plane beneath the MCU. Place the 7.3728 MHz or 8 MHz primary crystal within 5 mm of OSC1/OSC2, with a 1 kohm feedback resistor across the oscillator pins and 10-22 pF load caps to ground (per Microchip oscillator guidelines). Route the USB D+/D- lines as a 90-ohm differential pair, length-matched to within 150 mil, and place the 15 kohm pull-down on D- at the connector.
Do not exceed 3.6V on any pin, including MCLR. The PIC24E core is a 3.3V-only part and is NOT 5V tolerant - level-shift any 5V logic signals with a 4.7 kohm divider or external level translator. Do not enable the USB module without a valid VBUS present or with VUSB un-bypassed (1 uF cap required). Per the datasheet, ensure the FWDT postscaler is configured to prevent unwanted reset during long interrupt-disabled sections.
Estimated: at 70 MIPS CPU clock with all peripherals active, the PIC24EP512GU810 dissipates ~250 mW. The 100-pin TQFP has a theta_JA of approximately 45 C/W on a 4-layer board with copper pour, giving a 11C rise above ambient - well within the 125C junction limit. No heatsink is needed even in enclosed industrial housings. For -E extended temperature operation (-40C to +125C), keep ambient below 110C to maintain adequate margin.
Informasi Konformitas
RoHS and REACH compliant per Microchip product page. -E extended temperature variants are AEC-Q100 qualified for automotive use. Lead-free TQFP-100 package.
