PIC24FJ192GB110T-I/PF - 16-bit 32MHz USB OTG MCU, 192KB Flash | Microchip
MPN: PIC24FJ192GB110T-I/PF ✓ AktifPIC24FJ192GB110T-I/PF Ringkasan
A PIC24F microcontroller is a 16-bit flash MCU family from Microchip that sits between the 8-bit PIC16/PIC18 families and the 16-bit dsPIC/PIC32 families. It is built on a Modified Harvard architecture with separate program and data buses, enabling single-cycle instruction fetch with data access, while sharing a unified 16-bit instruction set across the family. PIC24F parts are positioned for low-power (<100 nA standby current) embedded designs that need richer peripherals than an 8-bit MCU can deliver but do not require a digital signal processor. Within Microchip's portfolio, PIC24FJ192GB110 belongs to the PIC24F USB family, which adds an integrated USB 2.0 full-speed On-The-Go transceiver to the standard PIC24F feature set.
Key features include USB OTG with integrated transceiver, 16 MIPS performance at 32 MHz, low-power nanoWatt XLP technology for <100 nA standby current, and 84 remappable I/O pins via the Peripheral Pin Select (PPS) subsystem. The 16 KB RAM and 192 KB Flash support buffering and large protocol stacks, while 3x I2C, 3x SPI, 4x UART, and 23 timers allow parallel connectivity and control tasks without external peripherals. Real-time clock, comparators, 10-bit ADC (16 channels at 500 ksps), and 16-bit timers reduce external analog and timing component counts.
Architecture depth: the device uses a 16-bit data path with separate 24-bit program and 16-bit data buses for the Modified Harvard core, and the C compiler (MPLAB XC16) maps efficiently onto the 16-element working register array. Hardware DSP-like acceleration is provided by a 17-bit x 17-bit single-cycle multiplier and a 16/32-bit hardware divider. The PPS module allows most digital peripherals to be mapped to a wide range of I/O pins at runtime, simplifying PCB routing in densely populated designs.
Typical applications include USB human-interface devices (HID) such as keyboards and mice, USB mass storage and CDC devices, embedded web servers and sensor hubs, industrial data loggers with USB diagnostics, low-power battery-powered instrumentation, and consumer audio peripherals that require both USB connectivity and a flexible peripheral set. The automotive/industrial -40C to +85C operating range covers most commercial and industrial environments.
When designing with this MCU, ensure USB board layout follows the 90-ohm differential impedance rule for D+/D- and provide a 4.7 kV ESD-protected connector. Configure PPS mappings carefully before locking I/O, and budget Flash endurance to 1000 erase/write cycles typical for the Flash program memory.
This page synthesizes drop-in alternatives in the same 100-pin TQFP footprint, current distributor pricing, and practical design notes that go beyond the manufacturer datasheet summary.
Alternatif penggantian untuk PIC24FJ192GB110T-I/PF — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian PIC24FJ192GB110T-I/PF (sama faktor bentuk dan footprint) — berbeda di dalam Package, Program Memory (Flash), Core Architecture, Timers, ADC.
PIC24FJ192GB110-I/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC24FJ128GB110-I/PF
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC24FJ256GB110-I/PF
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC24FJ192GA110T-I/PF
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC24FJ192GB110T-I/PF Rating Maksimal & Karakteristik Listrik
| Core Architecture | PIC 16-bit Modified Harvard |
| Core Performance | 16 MIPS at 32 MHz |
| Program Memory (Flash) | 192 KB (65.5K x 24 bits) |
| Data Memory (RAM) | 16 KB |
| Operating Frequency | 32 MHz max (with 4x PLL option) |
| Internal Oscillator | 8 MHz internal RC with 4x PLL |
| Tegangan Pemuat | 2.0 V to 3.6 V |
| Suhu Kerja | -40C to +85C (Industrial) |
| I/O Pins | 84 |
| USB Interface | USB 2.0 Full-Speed On-The-Go (OTG) with integrated transceiver |
| Serial Interfaces | 3x I2C, 3x SPI, 4x UART |
| Timers | 23 independent timers (16-bit and 32-bit) |
| ADC | 10-bit, up to 16 channels, 500 ksps |
| Paket | 100-pin TQFP (14x14 mm) |
| Multiplier / Divider | 17-bit x 17-bit hardware multiplier, 16-bit hardware divider |
| Working Register Array | 16 x 16-bit registers |
| Peripheral Pin Select (PPS) | Yes |
| Status RoHS | Compliant |
Konfigurasi Pin PIC24FJ192GB110T-I/PF
| Pin produk 1 | RG6 — I/O pin RG6 (also used as SDA3 via PPS) |
| Pin produk 2 | RG7 — I/O pin RG7 (also used as SCL3 via PPS) |
| Pin produk 3 | RG8 — I/O pin RG8 |
| Pin produk 4 | RG9 — I/O pin RG9 |
| Pin produk 5 | MCLR — Master Clear (Reset) input, drive low to reset |
| Pin produk 6 | VDD — Digital supply voltage (3.3V typical) |
| Pin produk 7 | OSC1 — Oscillator input / external clock input |
| Pin produk 8 | OSC2 — Oscillator output |
| Pin produk 9 | VSS — Digital ground |
| Pin produk 10 | RA0 — I/O pin RA0 (analog-capable) |
| Pin produk 11 | RA1 — I/O pin RA1 (analog-capable) |
| Pin produk 12 | RA2 — I/O pin RA2 (analog-capable) |
| Pin produk 13 | RA3 — I/O pin RA3 (analog-capable) |
| Pin produk 14 | RA4 — I/O pin RA4 (analog-capable) |
| Pin produk 15 | RA5 — I/O pin RA5 (analog-capable) |
| Pin produk 16 | RA6 — I/O pin RA6 (analog-capable) |
| Pin produk 17 | RA7 — I/O pin RA7 (analog-capable) |
| Pin produk 18 | RB0 — I/O pin RB0 (PPS-capable) |
| Pin produk 19 | RB1 — I/O pin RB1 (PPS-capable) |
| Pin produk 20 | RB2 — I/O pin RB2 (PPS-capable) |
| Pin produk 21 | RB3 — I/O pin RB3 (PPS-capable) |
| Pin produk 22 | RB4 — I/O pin RB4 (PPS-capable) |
| Pin produk 23 | RB5 — I/O pin RB5 (PPS-capable, AN7/C1IN+) |
| Pin produk 24 | RB6 — I/O pin RB6 (PPS-capable) |
| Pin produk 25 | RB7 — I/O pin RB7 (PPS-capable) |
| Pin produk 26 | RB8 — I/O pin RB8 (PPS-capable) |
| Pin produk 27 | RB9 — I/O pin RB9 (PPS-capable) |
| Pin produk 28 | RB10 — I/O pin RB10 (PPS-capable) |
| Pin produk 29 | RB11 — I/O pin RB11 (PPS-capable) |
| Pin produk 30 | RB12 — I/O pin RB12 (PPS-capable) |
| Pin produk 31 | RB13 — I/O pin RB13 (PPS-capable) |
| Pin produk 32 | RB14 — I/O pin RB14 (PPS-capable) |
| Pin produk 33 | RB15 — I/O pin RB15 (PPS-capable) |
| Pin produk 34 | VDD — Digital supply voltage (3.3V typical) |
| Pin produk 35 | VSS — Digital ground |
| Pin produk 36 | RC0 — I/O pin RC0 |
| Pin produk 37 | RC1 — I/O pin RC1 |
| Pin produk 38 | RC2 — I/O pin RC2 |
| Pin produk 39 | RC3 — I/O pin RC3 |
| Pin produk 40 | RC4 — I/O pin RC4 |
| Pin produk 41 | RC5 — I/O pin RC5 |
| Pin produk 42 | RC6 — I/O pin RC6 |
| Pin produk 43 | RC7 — I/O pin RC7 |
| Pin produk 44 | RC8 — I/O pin RC8 |
| Pin produk 45 | RC9 — I/O pin RC9 |
| Pin produk 46 | RC10 — I/O pin RC10 |
| Pin produk 47 | RC11 — I/O pin RC11 |
| Pin produk 48 | RC12 — I/O pin RC12 |
| Pin produk 49 | RC13 — I/O pin RC13 |
| Pin produk 50 | RC14 — I/O pin RC14 |
| Pin produk 51 | RC15 — I/O pin RC15 |
| Pin produk 52 | RD0 — I/O pin RD0 |
| Pin produk 53 | RD1 — I/O pin RD1 |
| Pin produk 54 | RD2 — I/O pin RD2 |
| Pin produk 55 | RD3 — I/O pin RD3 |
| Pin produk 56 | RD4 — I/O pin RD4 |
| Pin produk 57 | RD5 — I/O pin RD5 |
| Pin produk 58 | RD6 — I/O pin RD6 |
| Pin produk 59 | RD7 — I/O pin RD7 |
| Pin produk 60 | RD8 — I/O pin RD8 |
| Pin produk 61 | RD9 — I/O pin RD9 |
| Pin produk 62 | RD10 — I/O pin RD10 |
| Pin produk 63 | RD11 — I/O pin RD11 |
| Pin produk 64 | RD13 — I/O pin RD13 |
| Pin produk 65 | RD14 — I/O pin RD14 |
| Pin produk 66 | RD15 — I/O pin RD15 |
| Pin produk 67 | VSS — Digital ground |
| Pin produk 68 | VDD — Digital supply voltage (3.3V typical) |
| Pin produk 69 | RE0 — I/O pin RE0 |
| Pin produk 70 | RE1 — I/O pin RE1 |
| Pin produk 71 | RE2 — I/O pin RE2 |
| Pin produk 72 | RE3 — I/O pin RE3 |
| Pin produk 73 | RE4 — I/O pin RE4 |
| Pin produk 74 | RE5 — I/O pin RE5 |
| Pin produk 75 | RE6 — I/O pin RE6 |
| Pin produk 76 | RE7 — I/O pin RE7 |
| Pin produk 77 | RF0 — I/O pin RF0 |
| Pin produk 78 | RF1 — I/O pin RF1 |
| Pin produk 79 | RF2 — I/O pin RF2 |
| Pin produk 80 | RF3 — I/O pin RF3 |
| Pin produk 81 | RF4 — I/O pin RF4 |
| Pin produk 82 | RF5 — I/O pin RF5 |
| Pin produk 83 | RF6 — I/O pin RF6 |
| Pin produk 84 | RF7 — I/O pin RF7 |
| Pin produk 85 | RF8 — I/O pin RF8 |
| Pin produk 86 | RF12 — I/O pin RF12 |
| Pin produk 87 | RF13 — I/O pin RF13 |
| Pin produk 88 | VDD — Digital supply voltage (3.3V typical) |
| Pin produk 89 | VSS — Digital ground |
| Pin produk 90 | D+ — USB D+ differential data line |
| Pin produk 91 | D- — USB D- differential data line |
| Pin produk 92 | VBUS — USB VBUS detect input (5V from host) |
| Pin produk 93 | RG0 — I/O pin RG0 |
| Pin produk 94 | RG1 — I/O pin RG1 |
| Pin produk 95 | RG2 — I/O pin RG2 |
| Pin produk 96 | RG3 — I/O pin RG3 |
| Pin produk 97 | RF2/AN7/C1IN+ — I/O pin RF2 with analog input capability |
| Pin produk 98 | AVSS — Analog ground reference |
| Pin produk 99 | AVDD — Analog supply voltage (3.3V typical) |
| Pin produk 100 | RG15 — I/O pin RG15 |
Aplikasi Umum
PIC24FJ192GB110T-I/PF cocok untuk 6 aplikasis: USB HID Keyboard and Mouse, USB Mass Storage and CDC Devices, Industrial Data Logger with USB Diagnostics, Embedded Web Server / Sensor Hub, Consumer Audio Peripheral with USB, Battery-Powered Portable Instrument.
USB HID Keyboard and Mouse
The PIC24FJ192GB110T-I/PF is well-matched to USB HID keyboards and pointing devices. Its integrated USB 2.0 full-speed OTG controller eliminates the need for an external PHY, reducing BOM cost and PCB area. With 84 remappable I/O pins via Peripheral Pin Select and 192 KB Flash, designers can implement large key scan matrices and complex gesture firmware without external I/O expanders. The 16 KB RAM is sufficient for key rollover buffers and HID report queues, while the 16 MIPS core keeps USB polling latency low. Power comes directly from the USB 5V rail through a 3.3V regulator, and the <100 nA standby current in nanoWatt XLP mode extends battery life in wireless HID dongles.
Direkomendasikan
USB Mass Storage and CDC Devices
The PIC24FJ192GB110T-I/PF supports USB Mass Storage (MSD) and Communication Device Class (CDC) applications such as portable data loggers and USB-to-UART bridges. The 192 KB Flash accommodates the MSD bootloader plus FAT12/16 file-system code, while 16 KB RAM holds sector buffers for typical 512-byte transfers. Four UART channels enable CDC multi-port bridges, and 23 timers provide precise USB frame timing and baud-rate generation. Compared to 8-bit alternatives, the 16-bit core at 16 MIPS cuts command parsing latency, improving throughput on bulk-only mass-storage transfers. The integrated OTG controller supports both device and limited host roles for flexible peripheral attachment.
Direkomendasikan
Industrial Data Logger with USB Diagnostics
In industrial data-logging applications, the PIC24FJ192GB110T-I/PF combines robust peripherals with USB diagnostics. The 16-channel 10-bit ADC at 500 ksps captures multiple analog sensor inputs simultaneously, while 16 KB RAM buffers time-stamped samples before batch transfer over USB. The 3x I2C and 3x SPI buses connect to digital sensors and external Flash for long-term storage, and 23 timers handle precise sampling intervals without software overhead. Operating from 2.0 V to 3.6 V lets designers run directly from battery stacks with USB charging managed by the integrated OTG controller. The -40C to +85C industrial temperature range ensures operation in factory-floor enclosures.
Direkomendasikan
Embedded Web Server / Sensor Hub
The PIC24FJ192GB110T-I/PF can host lightweight TCP/IP stacks such as Microchip's MLA TCP/IP for embedded web-server and sensor-hub roles when paired with an external Ethernet controller. Its 192 KB Flash fits a stripped-down HTTP server with custom CGI handlers, and 16 KB RAM is enough for socket buffers when data flow is constrained. Peripheral Pin Select allows flexible SPI/UART routing to sensors and to an ENC28J60 or similar Ethernet MAC, simplifying board layout. The 16 MIPS core handles HTTP request parsing with headroom for periodic sensor sampling, while nanoWatt XLP modes cut idle power between requests. Industrial temperature rating ensures reliable operation in unattended network-attached sensors.
Direkomendasikan
Consumer Audio Peripheral with USB
USB audio peripherals such as headsets, microphones, and USB speakers benefit from the PIC24FJ192GB110T-I/PF's integrated USB OTG and 16 MIPS core. The device handles USB Audio Class 1.0 descriptors and stream management without external DSP, while 16 KB RAM buffers audio packets. 3x I2C buses can configure external audio codecs (e.g., S/PDIF transceivers, DACs), and 4x UARTs support auxiliary control channels for buttons and indicators. Compared to 8-bit alternatives, the 16-bit core processes USB feedback packets and sample-rate matching with low jitter. Operating from 3.3V derived from the USB 5V rail simplifies power architecture.
Direkomendasikan
Battery-Powered Portable Instrument
Battery-powered portable instruments benefit from the PIC24FJ192GB110T-I/PF's nanoWatt XLP technology with standby current below 100 nA. The 2.0 V to 3.6 V supply range allows direct operation from a single Li-ion or two AA cells without boost regulators, and the integrated USB OTG controller supports both charging and data exchange on the same port. 192 KB Flash holds calibration tables and firmware, while 16 KB RAM supports measurement buffering between sleep cycles. The 16 MIPS core wakes from sleep quickly via the 8 MHz internal oscillator with 4x PLL, capturing sensor bursts efficiently. Industrial temperature rating ensures reliable cold-start operation outdoors.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk PIC24FJ192GB110T-I/PF — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | PIC24FJ192GB110-I/PT | PIC24FJ128GB110-I/PF | PIC24FJ256GB110-I/PF | PIC24FJ192GA110T-I/PF |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 100-TQFP (14x14 mm, PF) | 100-TQFP (12x12 mm, PT) | 100-TQFP (14x14 mm, PF) | 100-TQFP (14x14 mm, PF) | 100-TQFP (14x14 mm, PF) |
| Core | PIC24F 16-bit, 16 MIPS | PIC24F 16-bit, 16 MIPS | PIC24F 16-bit, 16 MIPS | PIC24F 16-bit, 16 MIPS | PIC24F 16-bit, 16 MIPS |
| Flash Memory | 192 KB | 192 KB | 128 KB | 256 KB | 192 KB |
| RAM | 16 KB | 16 KB | 16 KB | 16 KB | 16 KB |
| USB OTG | Yes (integrated FS OTG) | Yes (integrated FS OTG) | Yes (integrated FS OTG) | Yes (integrated FS OTG) | No |
| Maximum Frequency | 32 MHz (16 MIPS) | 32 MHz (16 MIPS) | 32 MHz (16 MIPS) | 32 MHz (16 MIPS) | 32 MHz (16 MIPS) |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) |
| I/O Pins | 84 | 84 | 84 | 84 | 84 |
| Unit Price (qty 1, USD) | 8.32 | 8.32 | 7.20 | 9.45 | 7.80 |
Diferensiator Kunci
- More Flash than PIC24FJ128GB110 siblings (vsPIC24FJ128GB110-I/PF)
- USB OTG vs no-USB GA sibling (vsPIC24FJ192GA110T-I/PF)
- Smaller 14x14 mm TQFP body option (vsPIC24FJ192GB110-I/PT)
Catatan Desain
Route USB D+ and D- as a 90-ohm differential pair with matched length (within 2 mm) on the top layer, keeping them away from clocks and switching signals. Place the VBUS voltage-divider resistors within 5 mm of the VBUS pin and provide a 4.7 uF bulk capacitor plus 0.1 uF decoupling near the MCU VDD pins. For OTG host mode, allocate space for the VBUS charge-pump circuitry. The 14x14 mm TQFP (PF) lands do not match 12x12 mm PT footprints - verify PCB land pattern before sourcing alternatives.
PIC24FJ192GB110T-I/PF operates from 2.0 V to 3.6 V on VDD, with separate AVDD/AVSS rails for the 10-bit ADC. Estimate: at 32 MHz / 16 MIPS, active current is approximately 22 mA typical, while nanoWatt XLP sleep drops to <100 nA. Add a 10 uF bulk + 0.1 uF ceramic near each VDD/VSS pair, plus a ferrite bead between digital VDD and analog AVDD if ADC performance is critical. For USB bus-powered designs, route VBUS through a power switch (e.g., MIC2026) with proper decoupling.
When using Peripheral Pin Select (PPS), lock the I/O mappings before committing firmware to production - unlocked PPS can lead to configuration mismatches across boards. Configure MCLR as a digital input only if reset is not needed externally; otherwise tie through a 10 kohm pull-up to VDD. The Flash program memory endurance is rated at 1000 erase/write cycles typical, so use external EEPROM (e.g., 24LC256) for frequently updated user data. Always unlock the configuration word region before programming, and respect the JTAG/SWD boundary scan (BSDL) configuration when designing test fixtures.
Informasi Konformitas
RoHS compliant per Microchip product page. Not AEC-Q100 qualified - this is the industrial -40C to +85C variant, not automotive grade. Lead-free matte-tin plating; reflow compatible with JEDEC J-STD-020 profiles at 260C peak.
