PIC24FJ192GB110T-I/PF - 16-bit 32MHz USB OTG MCU, 192KB Flash | Microchip
MPN： PIC24FJ192GB110T-I/PF ✓ 啟用中PIC24FJ192GB110T-I/PF 概覽
A PIC24F microcontroller is a 16-bit flash MCU family from Microchip that sits between the 8-bit PIC16/PIC18 families and the 16-bit dsPIC/PIC32 families. It is built on a Modified Harvard architecture with separate program and data buses, enabling single-cycle instruction fetch with data access, while sharing a unified 16-bit instruction set across the family. PIC24F parts are positioned for low-power (<100 nA standby current) embedded designs that need richer peripherals than an 8-bit MCU can deliver but do not require a digital signal processor. Within Microchip's portfolio, PIC24FJ192GB110 belongs to the PIC24F USB family, which adds an integrated USB 2.0 full-speed On-The-Go transceiver to the standard PIC24F feature set.
Key features include USB OTG with integrated transceiver, 16 MIPS performance at 32 MHz, low-power nanoWatt XLP technology for <100 nA standby current, and 84 remappable I/O pins via the Peripheral Pin Select (PPS) subsystem. The 16 KB RAM and 192 KB Flash support buffering and large protocol stacks, while 3x I2C, 3x SPI, 4x UART, and 23 timers allow parallel connectivity and control tasks without external peripherals. Real-time clock, comparators, 10-bit ADC (16 channels at 500 ksps), and 16-bit timers reduce external analog and timing component counts.
Architecture depth: the device uses a 16-bit data path with separate 24-bit program and 16-bit data buses for the Modified Harvard core, and the C compiler (MPLAB XC16) maps efficiently onto the 16-element working register array. Hardware DSP-like acceleration is provided by a 17-bit x 17-bit single-cycle multiplier and a 16/32-bit hardware divider. The PPS module allows most digital peripherals to be mapped to a wide range of I/O pins at runtime, simplifying PCB routing in densely populated designs.
Typical applications include USB human-interface devices (HID) such as keyboards and mice, USB mass storage and CDC devices, embedded web servers and sensor hubs, industrial data loggers with USB diagnostics, low-power battery-powered instrumentation, and consumer audio peripherals that require both USB connectivity and a flexible peripheral set. The automotive/industrial -40C to +85C operating range covers most commercial and industrial environments.
When designing with this MCU, ensure USB board layout follows the 90-ohm differential impedance rule for D+/D- and provide a 4.7 kV ESD-protected connector. Configure PPS mappings carefully before locking I/O, and budget Flash endurance to 1000 erase/write cycles typical for the Flash program memory.
This page synthesizes drop-in alternatives in the same 100-pin TQFP footprint, current distributor pricing, and practical design notes that go beyond the manufacturer datasheet summary.
直接替換替代品，適用於 PIC24FJ192GB110T-I/PF — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： PIC24FJ192GB110T-I/PF （相同外形與佔位） — 差異在於 Package, Program Memory (Flash), Core Architecture, Timers, ADC.
PIC24FJ192GB110-I/PT
✅ 直接替換聯絡詢價
查看資料表 →PIC24FJ128GB110-I/PF
✅ 直接替換聯絡詢價
查看資料表 →PIC24FJ256GB110-I/PF
✅ 直接替換聯絡詢價
查看資料表 →PIC24FJ192GA110T-I/PF
✅ 直接替換聯絡詢價
查看資料表 →PIC24FJ192GB110T-I/PF 最大額定值與電氣特性
| Core Architecture | PIC 16-bit Modified Harvard |
| Core Performance | 16 MIPS at 32 MHz |
| Program Memory (Flash) | 192 KB (65.5K x 24 bits) |
| Data Memory (RAM) | 16 KB |
| Operating Frequency | 32 MHz max (with 4x PLL option) |
| Internal Oscillator | 8 MHz internal RC with 4x PLL |
| 供應電壓 | 2.0 V to 3.6 V |
| 工作溫度 | -40C to +85C (Industrial) |
| I/O Pins | 84 |
| USB Interface | USB 2.0 Full-Speed On-The-Go (OTG) with integrated transceiver |
| Serial Interfaces | 3x I2C, 3x SPI, 4x UART |
| Timers | 23 independent timers (16-bit and 32-bit) |
| ADC | 10-bit, up to 16 channels, 500 ksps |
| 封裝 | 100-pin TQFP (14x14 mm) |
| Multiplier / Divider | 17-bit x 17-bit hardware multiplier, 16-bit hardware divider |
| Working Register Array | 16 x 16-bit registers |
| Peripheral Pin Select (PPS) | Yes |
| RoHS 狀態 | Compliant |
PIC24FJ192GB110T-I/PF 腳位配置
| 腳位 1 | RG6 — I/O pin RG6 (also used as SDA3 via PPS) |
| 腳位 2 | RG7 — I/O pin RG7 (also used as SCL3 via PPS) |
| 腳位 3 | RG8 — I/O pin RG8 |
| 腳位 4 | RG9 — I/O pin RG9 |
| 腳位 5 | MCLR — Master Clear (Reset) input, drive low to reset |
| 腳位 6 | VDD — Digital supply voltage (3.3V typical) |
| 腳位 7 | OSC1 — Oscillator input / external clock input |
| 腳位 8 | OSC2 — Oscillator output |
| 腳位 9 | VSS — Digital ground |
| 腳位 10 | RA0 — I/O pin RA0 (analog-capable) |
| 腳位 11 | RA1 — I/O pin RA1 (analog-capable) |
| 腳位 12 | RA2 — I/O pin RA2 (analog-capable) |
| 腳位 13 | RA3 — I/O pin RA3 (analog-capable) |
| 腳位 14 | RA4 — I/O pin RA4 (analog-capable) |
| 腳位 15 | RA5 — I/O pin RA5 (analog-capable) |
| 腳位 16 | RA6 — I/O pin RA6 (analog-capable) |
| 腳位 17 | RA7 — I/O pin RA7 (analog-capable) |
| 腳位 18 | RB0 — I/O pin RB0 (PPS-capable) |
| 腳位 19 | RB1 — I/O pin RB1 (PPS-capable) |
| 腳位 20 | RB2 — I/O pin RB2 (PPS-capable) |
| 腳位 21 | RB3 — I/O pin RB3 (PPS-capable) |
| 腳位 22 | RB4 — I/O pin RB4 (PPS-capable) |
| 腳位 23 | RB5 — I/O pin RB5 (PPS-capable, AN7/C1IN+) |
| 腳位 24 | RB6 — I/O pin RB6 (PPS-capable) |
| 腳位 25 | RB7 — I/O pin RB7 (PPS-capable) |
| 腳位 26 | RB8 — I/O pin RB8 (PPS-capable) |
| 腳位 27 | RB9 — I/O pin RB9 (PPS-capable) |
| 腳位 28 | RB10 — I/O pin RB10 (PPS-capable) |
| 腳位 29 | RB11 — I/O pin RB11 (PPS-capable) |
| 腳位 30 | RB12 — I/O pin RB12 (PPS-capable) |
| 腳位 31 | RB13 — I/O pin RB13 (PPS-capable) |
| 腳位 32 | RB14 — I/O pin RB14 (PPS-capable) |
| 腳位 33 | RB15 — I/O pin RB15 (PPS-capable) |
| 腳位 34 | VDD — Digital supply voltage (3.3V typical) |
| 腳位 35 | VSS — Digital ground |
| 腳位 36 | RC0 — I/O pin RC0 |
| 腳位 37 | RC1 — I/O pin RC1 |
| 腳位 38 | RC2 — I/O pin RC2 |
| 腳位 39 | RC3 — I/O pin RC3 |
| 腳位 40 | RC4 — I/O pin RC4 |
| 腳位 41 | RC5 — I/O pin RC5 |
| 腳位 42 | RC6 — I/O pin RC6 |
| 腳位 43 | RC7 — I/O pin RC7 |
| 腳位 44 | RC8 — I/O pin RC8 |
| 腳位 45 | RC9 — I/O pin RC9 |
| 腳位 46 | RC10 — I/O pin RC10 |
| 腳位 47 | RC11 — I/O pin RC11 |
| 腳位 48 | RC12 — I/O pin RC12 |
| 腳位 49 | RC13 — I/O pin RC13 |
| 腳位 50 | RC14 — I/O pin RC14 |
| 腳位 51 | RC15 — I/O pin RC15 |
| 腳位 52 | RD0 — I/O pin RD0 |
| 腳位 53 | RD1 — I/O pin RD1 |
| 腳位 54 | RD2 — I/O pin RD2 |
| 腳位 55 | RD3 — I/O pin RD3 |
| 腳位 56 | RD4 — I/O pin RD4 |
| 腳位 57 | RD5 — I/O pin RD5 |
| 腳位 58 | RD6 — I/O pin RD6 |
| 腳位 59 | RD7 — I/O pin RD7 |
| 腳位 60 | RD8 — I/O pin RD8 |
| 腳位 61 | RD9 — I/O pin RD9 |
| 腳位 62 | RD10 — I/O pin RD10 |
| 腳位 63 | RD11 — I/O pin RD11 |
| 腳位 64 | RD13 — I/O pin RD13 |
| 腳位 65 | RD14 — I/O pin RD14 |
| 腳位 66 | RD15 — I/O pin RD15 |
| 腳位 67 | VSS — Digital ground |
| 腳位 68 | VDD — Digital supply voltage (3.3V typical) |
| 腳位 69 | RE0 — I/O pin RE0 |
| 腳位 70 | RE1 — I/O pin RE1 |
| 腳位 71 | RE2 — I/O pin RE2 |
| 腳位 72 | RE3 — I/O pin RE3 |
| 腳位 73 | RE4 — I/O pin RE4 |
| 腳位 74 | RE5 — I/O pin RE5 |
| 腳位 75 | RE6 — I/O pin RE6 |
| 腳位 76 | RE7 — I/O pin RE7 |
| 腳位 77 | RF0 — I/O pin RF0 |
| 腳位 78 | RF1 — I/O pin RF1 |
| 腳位 79 | RF2 — I/O pin RF2 |
| 腳位 80 | RF3 — I/O pin RF3 |
| 腳位 81 | RF4 — I/O pin RF4 |
| 腳位 82 | RF5 — I/O pin RF5 |
| 腳位 83 | RF6 — I/O pin RF6 |
| 腳位 84 | RF7 — I/O pin RF7 |
| 腳位 85 | RF8 — I/O pin RF8 |
| 腳位 86 | RF12 — I/O pin RF12 |
| 腳位 87 | RF13 — I/O pin RF13 |
| 腳位 88 | VDD — Digital supply voltage (3.3V typical) |
| 腳位 89 | VSS — Digital ground |
| 腳位 90 | D+ — USB D+ differential data line |
| 腳位 91 | D- — USB D- differential data line |
| 腳位 92 | VBUS — USB VBUS detect input (5V from host) |
| 腳位 93 | RG0 — I/O pin RG0 |
| 腳位 94 | RG1 — I/O pin RG1 |
| 腳位 95 | RG2 — I/O pin RG2 |
| 腳位 96 | RG3 — I/O pin RG3 |
| 腳位 97 | RF2/AN7/C1IN+ — I/O pin RF2 with analog input capability |
| 腳位 98 | AVSS — Analog ground reference |
| 腳位 99 | AVDD — Analog supply voltage (3.3V typical) |
| 腳位 100 | RG15 — I/O pin RG15 |
典型應用
PIC24FJ192GB110T-I/PF 適用於 6 應用s: USB HID Keyboard and Mouse, USB Mass Storage and CDC Devices, Industrial Data Logger with USB Diagnostics, Embedded Web Server / Sensor Hub, Consumer Audio Peripheral with USB, Battery-Powered Portable Instrument.
USB HID Keyboard and Mouse
The PIC24FJ192GB110T-I/PF is well-matched to USB HID keyboards and pointing devices. Its integrated USB 2.0 full-speed OTG controller eliminates the need for an external PHY, reducing BOM cost and PCB area. With 84 remappable I/O pins via Peripheral Pin Select and 192 KB Flash, designers can implement large key scan matrices and complex gesture firmware without external I/O expanders. The 16 KB RAM is sufficient for key rollover buffers and HID report queues, while the 16 MIPS core keeps USB polling latency low. Power comes directly from the USB 5V rail through a 3.3V regulator, and the <100 nA standby current in nanoWatt XLP mode extends battery life in wireless HID dongles.
推薦
USB Mass Storage and CDC Devices
The PIC24FJ192GB110T-I/PF supports USB Mass Storage (MSD) and Communication Device Class (CDC) applications such as portable data loggers and USB-to-UART bridges. The 192 KB Flash accommodates the MSD bootloader plus FAT12/16 file-system code, while 16 KB RAM holds sector buffers for typical 512-byte transfers. Four UART channels enable CDC multi-port bridges, and 23 timers provide precise USB frame timing and baud-rate generation. Compared to 8-bit alternatives, the 16-bit core at 16 MIPS cuts command parsing latency, improving throughput on bulk-only mass-storage transfers. The integrated OTG controller supports both device and limited host roles for flexible peripheral attachment.
推薦
Industrial Data Logger with USB Diagnostics
In industrial data-logging applications, the PIC24FJ192GB110T-I/PF combines robust peripherals with USB diagnostics. The 16-channel 10-bit ADC at 500 ksps captures multiple analog sensor inputs simultaneously, while 16 KB RAM buffers time-stamped samples before batch transfer over USB. The 3x I2C and 3x SPI buses connect to digital sensors and external Flash for long-term storage, and 23 timers handle precise sampling intervals without software overhead. Operating from 2.0 V to 3.6 V lets designers run directly from battery stacks with USB charging managed by the integrated OTG controller. The -40C to +85C industrial temperature range ensures operation in factory-floor enclosures.
推薦
Embedded Web Server / Sensor Hub
The PIC24FJ192GB110T-I/PF can host lightweight TCP/IP stacks such as Microchip's MLA TCP/IP for embedded web-server and sensor-hub roles when paired with an external Ethernet controller. Its 192 KB Flash fits a stripped-down HTTP server with custom CGI handlers, and 16 KB RAM is enough for socket buffers when data flow is constrained. Peripheral Pin Select allows flexible SPI/UART routing to sensors and to an ENC28J60 or similar Ethernet MAC, simplifying board layout. The 16 MIPS core handles HTTP request parsing with headroom for periodic sensor sampling, while nanoWatt XLP modes cut idle power between requests. Industrial temperature rating ensures reliable operation in unattended network-attached sensors.
推薦
Consumer Audio Peripheral with USB
USB audio peripherals such as headsets, microphones, and USB speakers benefit from the PIC24FJ192GB110T-I/PF's integrated USB OTG and 16 MIPS core. The device handles USB Audio Class 1.0 descriptors and stream management without external DSP, while 16 KB RAM buffers audio packets. 3x I2C buses can configure external audio codecs (e.g., S/PDIF transceivers, DACs), and 4x UARTs support auxiliary control channels for buttons and indicators. Compared to 8-bit alternatives, the 16-bit core processes USB feedback packets and sample-rate matching with low jitter. Operating from 3.3V derived from the USB 5V rail simplifies power architecture.
推薦
Battery-Powered Portable Instrument
Battery-powered portable instruments benefit from the PIC24FJ192GB110T-I/PF's nanoWatt XLP technology with standby current below 100 nA. The 2.0 V to 3.6 V supply range allows direct operation from a single Li-ion or two AA cells without boost regulators, and the integrated USB OTG controller supports both charging and data exchange on the same port. 192 KB Flash holds calibration tables and firmware, while 16 KB RAM supports measurement buffering between sleep cycles. The 16 MIPS core wakes from sleep quickly via the 8 MHz internal oscillator with 4x PLL, capturing sensor bursts efficiently. Industrial temperature rating ensures reliable cold-start operation outdoors.
推薦
推薦產品摘要
工程參考資料，適用於 PIC24FJ192GB110T-I/PF — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | PIC24FJ192GB110-I/PT | PIC24FJ128GB110-I/PF | PIC24FJ256GB110-I/PF | PIC24FJ192GA110T-I/PF |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 100-TQFP (14x14 mm, PF) | 100-TQFP (12x12 mm, PT) | 100-TQFP (14x14 mm, PF) | 100-TQFP (14x14 mm, PF) | 100-TQFP (14x14 mm, PF) |
| Core | PIC24F 16-bit, 16 MIPS | PIC24F 16-bit, 16 MIPS | PIC24F 16-bit, 16 MIPS | PIC24F 16-bit, 16 MIPS | PIC24F 16-bit, 16 MIPS |
| Flash Memory | 192 KB | 192 KB | 128 KB | 256 KB | 192 KB |
| RAM | 16 KB | 16 KB | 16 KB | 16 KB | 16 KB |
| USB OTG | Yes (integrated FS OTG) | Yes (integrated FS OTG) | Yes (integrated FS OTG) | Yes (integrated FS OTG) | No |
| Maximum Frequency | 32 MHz (16 MIPS) | 32 MHz (16 MIPS) | 32 MHz (16 MIPS) | 32 MHz (16 MIPS) | 32 MHz (16 MIPS) |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) |
| I/O Pins | 84 | 84 | 84 | 84 | 84 |
| Unit Price (qty 1, USD) | 8.32 | 8.32 | 7.20 | 9.45 | 7.80 |
主要差異化特點
- More Flash than PIC24FJ128GB110 siblings (對比PIC24FJ128GB110-I/PF)
- USB OTG vs no-USB GA sibling (對比PIC24FJ192GA110T-I/PF)
- Smaller 14x14 mm TQFP body option (對比PIC24FJ192GB110-I/PT)
設計說明
Route USB D+ and D- as a 90-ohm differential pair with matched length (within 2 mm) on the top layer, keeping them away from clocks and switching signals. Place the VBUS voltage-divider resistors within 5 mm of the VBUS pin and provide a 4.7 uF bulk capacitor plus 0.1 uF decoupling near the MCU VDD pins. For OTG host mode, allocate space for the VBUS charge-pump circuitry. The 14x14 mm TQFP (PF) lands do not match 12x12 mm PT footprints - verify PCB land pattern before sourcing alternatives.
PIC24FJ192GB110T-I/PF operates from 2.0 V to 3.6 V on VDD, with separate AVDD/AVSS rails for the 10-bit ADC. Estimate: at 32 MHz / 16 MIPS, active current is approximately 22 mA typical, while nanoWatt XLP sleep drops to <100 nA. Add a 10 uF bulk + 0.1 uF ceramic near each VDD/VSS pair, plus a ferrite bead between digital VDD and analog AVDD if ADC performance is critical. For USB bus-powered designs, route VBUS through a power switch (e.g., MIC2026) with proper decoupling.
When using Peripheral Pin Select (PPS), lock the I/O mappings before committing firmware to production - unlocked PPS can lead to configuration mismatches across boards. Configure MCLR as a digital input only if reset is not needed externally; otherwise tie through a 10 kohm pull-up to VDD. The Flash program memory endurance is rated at 1000 erase/write cycles typical, so use external EEPROM (e.g., 24LC256) for frequently updated user data. Always unlock the configuration word region before programming, and respect the JTAG/SWD boundary scan (BSDL) configuration when designing test fixtures.
合規資訊
RoHS compliant per Microchip product page. Not AEC-Q100 qualified - this is the industrial -40C to +85C variant, not automotive grade. Lead-free matte-tin plating; reflow compatible with JEDEC J-STD-020 profiles at 260C peak.
