PIC24FJ512GU410-I/PT - 512KB Flash, USB, LCD 16-bit MCU | Microchip
MPN: PIC24FJ512GU410-I/PT ✓ AktifPIC24FJ512GU410-I/PT Ringkasan
A 16-bit microcontroller (MCU) is an embedded processor that fetches 16-bit instructions and operates on 8/16-bit data paths, balancing code density, deterministic interrupt latency, and richer peripherals over 8-bit cores. Within the broader taxonomy, the PIC24F belongs to the 16-bit MCU -> microcontroller -> embedded processor -> semiconductor family, and the PIC24FJ512GU410 specifically targets low-power, USB-enabled human-machine interface (HMI) designs with segment LCDs.
Key features include 512 KB self-programmable Flash with dual-partition OTA updates and EEPROM emulation, 32 KB SRAM, a 10-bit 1 MSPS ADC, multiple UART/SPI/I2C peripherals, a Real-Time Clock/Calendar (RTCC), a DMA controller, and the segment LCD driver supporting up to 480 segments. The integrated USB 2.0 full-speed transceiver eliminates external PHY cost, while the DMA engine offloads peripheral-to-memory transfers for higher throughput.
Typical applications include industrial segment-LCD HMI panels, USB sensor hubs, battery-powered metering with display, medical handheld instrumentation, and home-automation controllers requiring OTA firmware updates. The wide operating voltage range and low-power Sleep modes make it equally suited to line-powered and battery-backed designs where the LCD must remain visible while the core is dormant.
When designing with this device, ensure VDD decoupling follows the manufacturer reference layout with 100 nF caps at every supply pin and a 10 µF bulk near the regulator. The dual-partition Flash enables bootloader-driven OTA updates without external memory, but designers must plan partition sizes and the live-update state machine before deployment. This page combines distributor pricing, drop-in alternatives, and practical design notes that are not aggregated in the manufacturer datasheet alone.
Alternatif penggantian untuk PIC24FJ512GU410-I/PT — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian PIC24FJ512GU410-I/PT (sama faktor bentuk dan footprint) — berbeda di dalam Package, LCD Controller, Operating Temperature, ADC, USB.
PIC24FJ512GU406T-I/PT
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →PIC24FJ512GU405T-I/M4
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →PIC24FJ512GU405-I/PT
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →PIC24FJ128GU410-I/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC24FJ512GL410-I/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC24FJ512GU410-I/PT Rating Maksimal & Karakteristik Listrik
| Core Architecture | PIC24F (16-bit modified Harvard) |
| Maximum CPU Speed | 32 MHz (16 MIPS) |
| Program Flash | 512 KB (dual-partition, self-programmable) |
| SRAM | 32 KB |
| EEPROM Emulation | Yes (in Flash) |
| Operating Voltage Range | 2.0 V to 3.6 V |
| USB | USB 2.0 Full-Speed Device/Host/OTG (on-chip transceiver) |
| ADC | 10-bit, up to 1 MSPS |
| LCD Controller | Segment LCD, up to 480 segments / 116 commons |
| DMA Channels | 8 channels |
| RTCC | Yes, with VBAT domain support |
| Timers | Multiple 16-bit Timer modules |
| Communication Peripherals | UART, SPI, I2C |
| Paket | 100-pin TQFP (PT), 12x12 mm |
| Tipe Mounting | Surface Mount |
| Suhu Kerja | -40C to +85C (Industrial -I) |
| Status RoHS | Compliant |
| Level MSL | 3 (168 hours) |
Konfigurasi Pin PIC24FJ512GU410-I/PT
| Pin produk 1 | RG15 — GPIO port RG bit 15 / segment LCD |
| Pin produk 2 | RG13 — GPIO port RG bit 13 |
| Pin produk 3 | RG14 — GPIO port RG bit 14 |
| Pin produk 4 | RA0 — GPIO port RA bit 0 / analog |
| Pin produk 5 | RA1 — GPIO port RA bit 1 / analog |
| Pin produk 6 | RA2 — GPIO port RA bit 2 / analog |
| Pin produk 7 | RA3 — GPIO port RA bit 3 / analog |
| Pin produk 8 | RA4 — GPIO port RA bit 4 |
| Pin produk 9 | RA5 — GPIO port RA bit 5 |
| Pin produk 10 | RA6 — GPIO port RA bit 6 |
| Pin produk 11 | RA7 — GPIO port RA bit 7 |
| Pin produk 12 | RB0 — GPIO port RB bit 0 / PGED1 |
| Pin produk 13 | RB1 — GPIO port RB bit 1 / PGEC1 |
| Pin produk 14 | RB2 — GPIO port RB bit 2 |
| Pin produk 15 | RB3 — GPIO port RB bit 3 |
| Pin produk 16 | RB4 — GPIO port RB bit 4 |
| Pin produk 17 | RB5 — GPIO port RB bit 5 |
| Pin produk 18 | RB6 — GPIO port RB bit 6 |
| Pin produk 19 | RB7 — GPIO port RB bit 7 |
| Pin produk 20 | RB8 — GPIO port RB bit 8 |
| Pin produk 21 | RB9 — GPIO port RB bit 9 |
| Pin produk 22 | RB10 — GPIO port RB bit 10 |
| Pin produk 23 | RB11 — GPIO port RB bit 11 |
| Pin produk 24 | RB12 — GPIO port RB bit 12 |
| Pin produk 25 | RB13 — GPIO port RB bit 13 |
| Pin produk 26 | RB14 — GPIO port RB bit 14 |
| Pin produk 27 | RB15 — GPIO port RB bit 15 |
| Pin produk 28 | VSS — Ground reference |
| Pin produk 29 | VDD — Positive supply 2.0-3.6 V |
| Pin produk 30 | RC0 — GPIO port RC bit 0 |
| Pin produk 31 | RC1 — GPIO port RC bit 1 |
| Pin produk 32 | RC2 — GPIO port RC bit 2 |
| Pin produk 33 | RC3 — GPIO port RC bit 3 |
| Pin produk 34 | RC4 — GPIO port RC bit 4 |
| Pin produk 35 | RC5 — GPIO port RC bit 5 |
| Pin produk 36 | RC6 — GPIO port RC bit 6 |
| Pin produk 37 | RC7 — GPIO port RC bit 7 |
| Pin produk 38 | RC8 — GPIO port RC bit 8 |
| Pin produk 39 | RC9 — GPIO port RC bit 9 |
| Pin produk 40 | RC10 — GPIO port RC bit 10 |
| Pin produk 41 | RC11 — GPIO port RC bit 11 |
| Pin produk 42 | RC12 — GPIO port RC bit 12 |
| Pin produk 43 | RC13 — GPIO port RC bit 13 |
| Pin produk 44 | RC14 — GPIO port RC bit 14 |
| Pin produk 45 | RC15 — GPIO port RC bit 15 |
| Pin produk 46 | VSS — Ground reference |
| Pin produk 47 | VDD — Positive supply 2.0-3.6 V |
| Pin produk 48 | RD0 — GPIO port RD bit 0 |
| Pin produk 49 | RD1 — GPIO port RD bit 1 |
| Pin produk 50 | RD2 — GPIO port RD bit 2 |
| Pin produk 51 | RD3 — GPIO port RD bit 3 |
| Pin produk 52 | RD4 — GPIO port RD bit 4 |
| Pin produk 53 | RD5 — GPIO port RD bit 5 |
| Pin produk 54 | RD6 — GPIO port RD bit 6 |
| Pin produk 55 | RD7 — GPIO port RD bit 7 |
| Pin produk 56 | RD8 — GPIO port RD bit 8 |
| Pin produk 57 | RD9 — GPIO port RD bit 9 |
| Pin produk 58 | RD10 — GPIO port RD bit 10 |
| Pin produk 59 | RD11 — GPIO port RD bit 11 |
| Pin produk 60 | RD12 — GPIO port RD bit 12 |
| Pin produk 61 | RD13 — GPIO port RD bit 13 |
| Pin produk 62 | RD14 — GPIO port RD bit 14 |
| Pin produk 63 | RD15 — GPIO port RD bit 15 |
| Pin produk 64 | VSS — Ground reference |
| Pin produk 65 | VDD — Positive supply 2.0-3.6 V |
| Pin produk 66 | RE0 — GPIO port RE bit 0 |
| Pin produk 67 | RE1 — GPIO port RE bit 1 |
| Pin produk 68 | RE2 — GPIO port RE bit 2 |
| Pin produk 69 | RE3 — GPIO port RE bit 3 |
| Pin produk 70 | RE4 — GPIO port RE bit 4 |
| Pin produk 71 | RE5 — GPIO port RE bit 5 |
| Pin produk 72 | RE6 — GPIO port RE bit 6 |
| Pin produk 73 | RE7 — GPIO port RE bit 7 |
| Pin produk 74 | RE8 — GPIO port RE bit 8 |
| Pin produk 75 | RE9 — GPIO port RE bit 9 |
| Pin produk 76 | RF0 — GPIO port RF bit 0 |
| Pin produk 77 | RF1 — GPIO port RF bit 1 |
| Pin produk 78 | RF2 — GPIO port RF bit 2 / SDA2 |
| Pin produk 79 | RF3 — GPIO port RF bit 3 / SCL2 |
| Pin produk 80 | RF4 — GPIO port RF bit 4 |
| Pin produk 81 | RF5 — GPIO port RF bit 5 |
| Pin produk 82 | RF6 — GPIO port RF bit 6 |
| Pin produk 83 | RF7 — GPIO port RF bit 7 |
| Pin produk 84 | RF8 — GPIO port RF bit 8 |
| Pin produk 85 | VSS — Ground reference |
| Pin produk 86 | VDD — Positive supply 2.0-3.6 V |
| Pin produk 87 | RG0 — GPIO port RG bit 0 |
| Pin produk 88 | RG1 — GPIO port RG bit 1 / D+ |
| Pin produk 89 | RG2 — GPIO port RG bit 2 / D- |
| Pin produk 90 | RG3 — GPIO port RG bit 3 |
| Pin produk 91 | RG4 — GPIO port RG bit 4 / RTCC |
| Pin produk 92 | RG5 — GPIO port RG bit 5 |
| Pin produk 93 | RG6 — GPIO port RG bit 6 |
| Pin produk 94 | RG7 — GPIO port RG bit 7 |
| Pin produk 95 | RG8 — GPIO port RG bit 8 |
| Pin produk 96 | RG9 — GPIO port RG bit 9 |
| Pin produk 97 | RG10 — GPIO port RG bit 10 |
| Pin produk 98 | RG11 — GPIO port RG bit 11 |
| Pin produk 99 | RG12 — GPIO port RG bit 12 |
| Pin produk 100 | MCLR — Master clear / reset (active low) |
Aplikasi Umum
PIC24FJ512GU410-I/PT cocok untuk 6 aplikasis: Industrial Segment-LCD HMI Panel, USB Sensor Hub, Battery-Powered Smart Meter with LCD, Medical Handheld Instrumentation, Home-Automation Controller with OTA, Automotive Accessory Display Module.
Industrial Segment-LCD HMI Panel
The PIC24FJ512GU410-I/PT is purpose-built for industrial segment-LCD HMI panels because its on-chip LCD controller drives up to 480 segments while the eXtreme Low-Power Sleep modes keep the display visible with the core dormant. With 32 KB SRAM, the MCU can buffer full screen refresh while the DMA engine streams background updates to the LCD without CPU wakeups. The 2.0 V to 3.6 V operating range tolerates noisy 24 V industrial rails after regulation. Place a 100 nF decoupling cap at every VDD/VDDCORE pin to keep the segment waveforms clean, and use the RTCC in low-voltage Sleep for accurate timed wakes.
Direkomendasikan
USB Sensor Hub
The integrated USB 2.0 Full-Speed OTG transceiver makes the PIC24FJ512GU410-I/PT a compact USB sensor hub, eliminating an external PHY and reducing BOM cost for HID or vendor-class devices. The DMA engine streams high-speed ADC samples into USB endpoints with minimal CPU load, sustaining throughput while keeping interrupt latency predictable. The 512 KB dual-partition Flash enables vendor firmware upgrades over USB without external memory. Pair the MCU with an ESD-protected USB connector and follow the manufacturer reference layout to maintain Chapter 7 electrical compliance.
Direkomendasikan
Battery-Powered Smart Meter with LCD
Battery-powered smart meters benefit from the PIC24FJ512GU410-I/PT's 5 low-power modes including a low-voltage Sleep that keeps the RTCC running from a separate LDO at microamp current. The 512 KB Flash supports Over-The-Air firmware updates for field-deployed meters, while the segment LCD driver displays consumption without waking the core. The 10-bit 1 MSPS ADC digitizes sensor inputs with sufficient precision for residential metering. Use VBAT to back up the RTCC across primary battery swaps.
Direkomendasikan
Medical Handheld Instrumentation
Medical handheld instruments such as glucose meters and pulse oximeters fit the PIC24FJ512GU410-I/PT because of its low-power Sleep, integrated USB for charging and data sync, and the segment LCD driver for numeric readouts. The industrial -I temperature grade covers the body-temperature operation range, and the 32 KB SRAM buffers patient data between scheduled syncs. Use the DMA to offload sensor sampling and reserve CPU bandwidth for user-interface logic.
Direkomendasikan
Home-Automation Controller with OTA
Home-automation controllers require reliable firmware updates and a UI surface; the PIC24FJ512GU410-I/PT delivers both via 512 KB dual-partition Flash for OTA rollbacks and a segment LCD for local status. USB OTG allows the same port to act as host for peripheral charging or device for cloud sync. The RTCC schedules wakeups for time-of-day automation. Add a SPI flash if persistent logging exceeds internal EEPROM emulation capacity.
Direkomendasikan
Automotive Accessory Display Module
Automotive accessory display modules such as garage-door indicators and aftermarket sensor displays leverage the PIC24FJ512GU410-I/PT's industrial -40C to +85C temperature grade and segment LCD for at-a-glance readouts. The USB port enables factory firmware loading and field diagnostics, while the RTCC timestamps events. The 32 KB SRAM buffers vehicle-bus messages filtered by the UART. Use automotive-grade LDOs to tolerate load-dump transients on the supply rail.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk PIC24FJ512GU410-I/PT — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | PIC24FJ512GU406T-I/PT | PIC24FJ512GU405T-I/M4 | PIC24FJ512GU405-I/PT | PIC24FJ128GU410-I/PT | PIC24FJ512GL410-I/PT |
|---|---|---|---|---|---|---|
| Package | 100-pin TQFP (PT) 12x12 mm | 100-pin TQFP (PT) - same | 100-pin TQFP (PT) - same | 100-pin TQFP (PT) - same | 100-pin TQFP (PT) - same | 100-pin TQFP (PT) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Program Flash | 512 KB | 512 KB | 512 KB | 512 KB | 128 KB | 512 KB |
| SRAM | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB |
| USB 2.0 Full-Speed | Yes (Device/Host/OTG) | Yes | Yes | Yes | Yes | No |
| Segment LCD Controller | Yes (up to 480 segments) | Yes | Yes | Yes | Yes | Yes |
| Maximum CPU Speed | 32 MHz / 16 MIPS | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Operating Voltage | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V |
| DMA Channels | 8 | 8 | 8 | 8 | 8 | 8 |
Diferensiator Kunci
- Highest on-chip Flash density in the PIC24FJ GU4 family at 100-pin TQFP (vsPIC24FJ128GU410-I/PT)
- Integrated USB 2.0 Full-Speed OTG transceiver on-chip (vsPIC24FJ512GL410-I/PT)
- Dual-partition Flash with Over-The-Air firmware update support (vsPIC24FJ256GA704-I/PT)
Catatan Desain
Place a 100 nF decoupling capacitor within 3 mm of every VDD/VDDCORE/AVDD pin and a single 10 uF bulk tantalum or ceramic on the main supply rail. The internal voltage regulator requires the bulk cap for stable Sleep-mode transitions; skipping it can cause RTCC drift or spurious resets. For battery designs, route VBAT through a Schottky diode so the RTCC domain retains time across primary-battery swaps.
The 100-pin TQFP uses 0.4 mm pitch; use 0.15 mm/0.20 mm trace width with matched impedance for USB D+/D- to comply with USB 2.0 Chapter 7 signaling. Route the crystal traces short and symmetric with a guard ring tied to ground, and keep the 32.768 kHz crystal within 5 mm of SOSC pins to minimize load-capacitance drift. Avoid routing high-frequency signals under the LCD segment traces.
When migrating between the PIC24FJ512GU410 and PIC24FJ512GL410, USB peripherals fail silently because the GL410 lacks the on-chip transceiver. Always confirm the silicon revision in the Device ID register and use the ICSP pair selected in your debug configuration - mixing PGEC1 with PGED2 prevents programming. The dual-partition Flash is not a substitute for EEPROM in applications requiring byte-level writes: enable the EEPROM emulation library and bound write cycles to avoid Flash wear.
The segment LCD controller multiplexes COM and SEG lines on shared GPIO; allocate dedicated ground pours around LCD traces to prevent digital noise from coupling into the segment waveforms. Tie unused LCD pins to VDD through 100 kohm resistors to prevent floating segments, and add a 1 uF cap on the LCD bias supply if the display flickers under heavy CPU load. Always enable the charge pump configuration bit when driving high-segment-count displays at low VDD.
Informasi Konformitas
RoHS and REACH compliance per Microchip product page. Industrial -I temperature grade; not AEC-Q100 qualified - select PIC24FJ512GB610-I/BG variants for automotive-grade applications.
