PIC32MZ1024EFK100T-E/GJX - 200MHz 32-bit MCU 1MB Flash TFBGA-100 | Microchip
MPN: PIC32MZ1024EFK100T-E/GJX ✓ AktifPIC32MZ1024EFK100T-E/GJX Ringkasan
An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals (ADCs, timers, communication controllers). Within the broader taxonomy, the PIC32MZ EF family sits at the top of Microchip's 32-bit PIC32 portfolio, between the lower-tier PIC32MX and the multimedia-focused PIC32MZ DA family. EF specifically denotes the Embedded Connectivity with Floating Point Unit variant, optimized for industrial IoT, motor control, graphics/HMI, and automotive connectivity applications.
Key features include 200 MHz core speed delivering up to 330 DMIPS, dual-panel Flash supporting live firmware updates, a 12-bit 5 MSPS ADC with up to 48 channels, eight UART, six SPI, four I2C, two CAN, USB 2.0 high-speed OTG, and Ethernet 10/100 MAC with MII/RMII. The 32-bit MIPS microAptiv core enables deterministic interrupt response and DSP-class math, while the integrated crypto accelerators and true random number generator (TRNG) make secure connected designs practical without external security ICs.
The PIC32MZ EF architecture combines a 7-stage pipeline, branch prediction, and tightly-coupled instruction/data paths to sustain high code-density throughput. The 1 MB dual-panel Flash allows concurrent read/execute during erase/program of the alternate panel, enabling fail-safe field firmware upgrades. The TFBGA-100 (7x7 mm) package exposes 78 GPIO plus the full peripheral set while keeping PCB footprint small for space-constrained designs.
Typical applications include industrial IoT gateways, automotive body and connectivity ECUs, motor control and inverter drive boards, graphics/HMI touch terminals, and USB/Ethernet-connected medical devices. The integrated peripherals eliminate many external components, reducing BOM cost and board area in connected embedded products.
When designing with the PIC32MZ1024EFK100T-E/GJX, note that the automotive -40C to +125C range requires thermal-aware PCB layout (the TFBGA has limited heat dissipation). Decouple every VDD/VSS pair with 100 nF X7R ceramic placed within 2 mm of the balls, and follow Microchip's IBIS models for SDRAM/QSPI signal integrity on high-speed buses.
This page synthesizes distributor stock data, drop-in same-package alternatives from the PIC32MZ family, and practical design notes not found on the standalone manufacturer product page.
Alternatif penggantian untuk PIC32MZ1024EFK100T-E/GJX — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian PIC32MZ1024EFK100T-E/GJX (sama faktor bentuk dan footprint) — berbeda di dalam Operating Temperature, Package, ADC, Core Architecture, FPU.
PIC32MZ1024EFE100T-E/GJX
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC32MZ1024EFF100T-E/GJX
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
PIC32MZ1024EFG100T-E/GJX
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
PIC32MZ1024EFK100-E/GJX
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
PIC32MZ0512EFK100T-E/GJX
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC32MZ1024EFH100T-E/GJX
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC32MZ1024EFK100T-E/GJX Rating Maksimal & Karakteristik Listrik
| Core Architecture | MIPS32 M-Class microAptiv (PIC32MZ EF) |
| Core Speed | 200 MHz |
| DMIPS | 330 DMIPS |
| Program Flash | 1 MB (1024 KB) |
| SRAM | 256 KB |
| FPU | IEEE 754-compliant single and double precision |
| Operating Voltage | 2.3 V to 3.6 V |
| Suhu Kerja | -40C to +125C (automotive /E grade) |
| Paket | 100-TFBGA (7x7 mm) |
| Jumlah Pin | 100 |
| GPIO | 78 |
| ADC | 12-bit, up to 5 MSPS, up to 48 channels |
| Crypto Engine | AES, DES, 3DES, SHA-1/SHA-256 with TRNG |
| USB | USB 2.0 High-Speed OTG |
| Ethernet | 10/100 MAC with MII/RMII |
| CAN | 2x CAN 2.0B |
| UART | 8x |
| SPI | 6x |
| I2C | 4x |
| AEC-Q100 | Qualified (/E temperature grade) |
| Tipe Mounting | Surface Mount (BGA) |
| Level MSL | 3 (168 hours) |
| Status RoHS | Compliant |
Konfigurasi Pin PIC32MZ1024EFK100T-E/GJX
| Pin produk A1 | VSS — Ground reference |
| Pin produk A2 | EBIA0 — External bus interface address |
| Pin produk A3 | EBID0 — External bus interface data |
| Pin produk A4 | VSS — Ground |
| Pin produk A5 | EBID2 — External bus interface data |
| Pin produk A6 | EBID5 — External bus interface data |
| Pin produk A7 | EBID7 — External bus interface data |
| Pin produk A8 | EBIA1 — External bus interface address |
| Pin produk A9 | VSS — Ground |
| Pin produk A10 | EBIA2 — External bus interface address |
| Pin produk B1 | RG0 — General purpose I/O |
| Pin produk B2 | RG1 — General purpose I/O |
| Pin produk B3 | VSS — Ground |
| Pin produk B4 | VDD — Core logic supply |
| Pin produk B5 | EBID1 — External bus interface data |
| Pin produk B6 | EBID3 — External bus interface data |
| Pin produk B7 | EBID6 — External bus interface data |
| Pin produk B8 | EBID8 — External bus interface data |
| Pin produk B9 | EBIA3 — External bus interface address |
| Pin produk B10 | EBIA4 — External bus interface address |
| Pin produk C1 | RG2 — General purpose I/O |
| Pin produk C2 | RG3 — General purpose I/O |
| Pin produk C3 | RG4 — General purpose I/O |
| Pin produk C4 | RG5 — General purpose I/O |
| Pin produk C5 | VSS — Ground |
| Pin produk C6 | VDD — Core logic supply |
| Pin produk C7 | EBID4 — External bus interface data |
| Pin produk C8 | EBID9 — External bus interface data |
| Pin produk C9 | EBID10 — External bus interface data |
| Pin produk C10 | EBIA5 — External bus interface address |
| Pin produk D1 | RG6 — General purpose I/O |
| Pin produk D2 | RG7 — General purpose I/O |
| Pin produk D3 | RG8 — General purpose I/O |
| Pin produk D4 | RG9 — General purpose I/O |
| Pin produk D5 | OSC1 — Primary oscillator input |
| Pin produk D6 | VDD — Core logic supply |
| Pin produk D7 | VSS — Ground |
| Pin produk D8 | EBID11 — External bus interface data |
| Pin produk D9 | EBID12 — External bus interface data |
| Pin produk D10 | EBID13 — External bus interface data |
| Pin produk E1 | RF0 — General purpose I/O |
| Pin produk E2 | RF1 — General purpose I/O |
| Pin produk E3 | RB0 — General purpose I/O / PGED1 |
| Pin produk E4 | RB1 — General purpose I/O / PGEC1 |
| Pin produk E5 | OSC2 — Primary oscillator output |
| Pin produk E6 | VDD — Core logic supply |
| Pin produk E7 | VSS — Ground |
| Pin produk E8 | EBID14 — External bus interface data |
| Pin produk E9 | EBID15 — External bus interface data |
| Pin produk E10 | EBIA6 — External bus interface address |
| Pin produk F1 | RB2 — General purpose I/O |
| Pin produk F2 | RB3 — General purpose I/O |
| Pin produk F3 | RB4 — General purpose I/O |
| Pin produk F4 | RB5 — General purpose I/O |
| Pin produk F5 | AVDD — Analog supply |
| Pin produk F6 | AVSS — Analog ground |
| Pin produk F7 | RB6 — General purpose I/O / PGED2 |
| Pin produk F8 | RB7 — General purpose I/O / PGEC2 |
| Pin produk F9 | EBIA7 — External bus interface address |
| Pin produk F10 | EBIA8 — External bus interface address |
| Pin produk G1 | RD0 — General purpose I/O |
| Pin produk G2 | RD1 — General purpose I/O |
| Pin produk G3 | RD2 — General purpose I/O |
| Pin produk G4 | RD3 — General purpose I/O |
| Pin produk G5 | RD4 — General purpose I/O |
| Pin produk G6 | RD5 — General purpose I/O |
| Pin produk G7 | RD6 — General purpose I/O |
| Pin produk G8 | RD7 — General purpose I/O |
| Pin produk G9 | EBIA9 — External bus interface address |
| Pin produk G10 | EBIA10 — External bus interface address |
| Pin produk H1 | RC0 — General purpose I/O |
| Pin produk H2 | RC1 — General purpose I/O |
| Pin produk H3 | RC2 — General purpose I/O |
| Pin produk H4 | VDD — Core logic supply |
| Pin produk H5 | VSS — Ground |
| Pin produk H6 | RC3 — General purpose I/O |
| Pin produk H7 | RC4 — General purpose I/O |
| Pin produk H8 | RC5 — General purpose I/O |
| Pin produk H9 | RC6 — General purpose I/O |
| Pin produk H10 | RC7 — General purpose I/O |
| Pin produk J1 | RA0 — General purpose I/O |
| Pin produk J2 | RA1 — General purpose I/O |
| Pin produk J3 | RA2 — General purpose I/O |
| Pin produk J4 | RA3 — General purpose I/O |
| Pin produk J5 | RA4 — General purpose I/O |
| Pin produk J6 | RA5 — General purpose I/O |
| Pin produk J7 | RA6 — General purpose I/O |
| Pin produk J8 | RA7 — General purpose I/O |
| Pin produk J9 | RE0 — General purpose I/O |
| Pin produk J10 | RE1 — General purpose I/O |
| Pin produk K1 | VSS — Ground |
| Pin produk K2 | VDD — Core logic supply |
| Pin produk K3 | RA8 — General purpose I/O |
| Pin produk K4 | RA9 — General purpose I/O |
| Pin produk K5 | RA10 — General purpose I/O |
| Pin produk K6 | RA11 — General purpose I/O |
| Pin produk K7 | RA12 — General purpose I/O |
| Pin produk K8 | RA13 — General purpose I/O |
| Pin produk K9 | RA14 — General purpose I/O |
| Pin produk K10 | RA15 — General purpose I/O |
Aplikasi Umum
PIC32MZ1024EFK100T-E/GJX cocok untuk 6 aplikasis: Automotive Body & Connectivity ECU, Industrial IoT Gateway, Motor Control & Inverter Drive, Graphics HMI Touch Terminal, Medical Device Connectivity Module, USB-Peripheral Embedded Host.
Automotive Body & Connectivity ECU
The PIC32MZ1024EFK100T-E/GJX is AEC-Q100 qualified to -40C to +125C and integrates 2x CAN 2.0B, USB 2.0 HS OTG, and 10/100 Ethernet MAC, making it ideal for in-vehicle body controllers, gateway ECUs, and telematics control units. With 1 MB dual-panel Flash the part supports fail-safe OTA firmware updates in the field without bricking the ECU. The hardware Crypto Engine accelerates TLS/DTLS handshakes for V2X and remote diagnostics, while the 200 MHz MIPS core and DSP extensions process sensor fusion algorithms in real time. Operating voltage 2.3V to 3.6V matches the 12V-battery-derived automotive rails after the LDO.
Direkomendasikan
Industrial IoT Gateway
The PIC32MZ1024EFK100T-E/GJX's combination of 10/100 Ethernet, USB HS OTG, dual CAN, 8 UART and 6 SPI lets a single MCU bridge multiple industrial fieldbuses (Modbus, CANopen, RS-485, RS-232) into TCP/IP. The 256 KB SRAM is large enough for TLS session buffers and MQTT payload queues, while the Crypto Engine handles AES-128/256 hardware acceleration for secure cloud uplinks. The 200 MHz MIPS microAptiv core runs lwIP TCP/IP, FreeRTOS, or Harmony stacks concurrently without bottleneck. The TFBGA-100 7x7 mm package keeps the gateway board compact for DIN-rail mounting.
Direkomendasikan
Motor Control & Inverter Drive
The PIC32MZ1024EFK100T-E/GJX excels at field-oriented control (FOC) for PMSM, BLDC, and ACIM motors thanks to its 200 MHz MIPS core with single-cycle MAC, four 64-bit accumulators, and saturating/fractional math. The 12-bit 5 MSPS ADC with up to 48 channels samples three-phase currents plus DC-bus voltage synchronously to the PWM, achieving sub-microsecond control-loop latency. Dual CAN enables CiA 402 drive profile communication, while the 1 MB Flash stores field-weakening and MTPA lookup tables. The automotive temperature grade also suits outdoor industrial drives and pump controllers.
Direkomendasikan
Graphics HMI Touch Terminal
The PIC32MZ1024EFK100T-E/GJX drives parallel RGB TFT panels up to WVGA through its PMP/EPMP peripheral, while the 200 MHz core executes Microchip's MPLAB Harmony graphics library with sufficient throughput for 60 fps button/label rendering. The 256 KB SRAM provides frame buffers for small QVGA panels without external memory; for larger panels the 6 SPI instances drive QSPI PSRAM. The 12-bit ADC supports 4-wire resistive touch, and USB HS OTG enables firmware update via USB stick in factory-floor terminals. The TFBGA-100 7x7 mm footprint suits slim-panel mounting.
Direkomendasikan
Medical Device Connectivity Module
The PIC32MZ1024EFK100T-E/GJX's hardware Crypto Engine, TRNG, and AES/SHA accelerators make it well-suited for medical devices requiring secure data transmission, such as patient monitors, infusion pumps, and portable diagnostic equipment communicating over Wi-Fi/Bluetooth add-on modules or wired Ethernet. The 1 MB dual-panel Flash supports FDA-compliant fail-safe firmware updates required for IEC 62304 risk management. The 12-bit ADC with 48 channels handles multi-sensor patient data acquisition, while USB HS OTG enables fast local data export to clinician tablets. Operating temperature -40C to +125C supports sterilization environments and refrigerated storage.
Direkomendasikan
USB-Peripheral Embedded Host
The PIC32MZ1024EFK100T-E/GJX's integrated USB 2.0 High-Speed OTG controller with integrated PHY simplifies designs for USB host, device, and On-The-Go roles. Applications include USB mass-storage data loggers, USB HID touch panels, USB CDC virtual COM port bridges, and USB audio class devices. The 200 MHz MIPS core handles USB stack, FAT file system, and user application concurrently. The Crypto Engine secures USB-encrypted data transfers. The 100-pin TFBGA package and 256 KB SRAM also leave headroom for LCD displays and keypad scanning in handheld instruments.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk PIC32MZ1024EFK100T-E/GJX — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | PIC32MZ1024EFE100T-E/GJX | PIC32MZ1024EFF100T-E/GJX | PIC32MZ1024EFG100T-E/GJX | PIC32MZ1024EFH100T-E/GJX | PIC32MZ0512EFK100T-E/GJX | PIC32MZ1024EFK100-E/GJX |
|---|---|---|---|---|---|---|---|
| Package | 100-TFBGA (7x7 mm) | 100-TFBGA (7x7 mm) - same | 100-TFBGA (7x7 mm) - same | 100-TFBGA (7x7 mm) - same | 100-TFBGA (7x7 mm) - same | 100-TFBGA (7x7 mm) - same | 100-TFBGA (7x7 mm) - same |
| Brand | Microchip Technology | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same |
| Core Speed | 200 MHz | 200 MHz - same | 200 MHz - same | 200 MHz - same | 200 MHz - same | 200 MHz - same | 200 MHz - same |
| Flash | 1 MB (1024 KB) dual-panel | 1 MB dual-panel | 1 MB dual-panel | 1 MB single-panel | 1 MB single-panel | 512 KB dual-panel (-50%) | 1 MB dual-panel - same |
| SRAM | 256 KB | 256 KB - same | 256 KB - same | 256 KB - same | 256 KB - same | 256 KB - same | 256 KB - same |
| Crypto Engine | Yes (AES/DES/SHA + TRNG) | No (-crypto engine) | Yes - same | Yes - same | Yes - same | Yes - same | Yes - same |
| Temperature Grade | -40C to +125C (Automotive /E) | -40C to +125C (Automotive /E) - same | -40C to +125C (Automotive /E) - same | -40C to +125C (Automotive /E) - same | -40C to +125C (Automotive /E) - same | -40C to +125C (Automotive /E) - same | -40C to +125C (Automotive /E) - same |
| AEC-Q100 | Yes | Yes - same | Yes - same | Yes - same | Yes - same | Yes - same | Yes - same |
| Packaging | Tape & Reel | Tape & Reel | Tape & Reel | Tape & Reel | Tape & Reel | Tape & Reel | Tray |
Diferensiator Kunci
- Dual-panel Flash for fail-safe OTA updates (vsPIC32MZ1024EFH100T-E/GJX)
- Integrated hardware Crypto Engine with TRNG (vsPIC32MZ1024EFE100T-E/GJX)
- AEC-Q100 automotive grade /E temperature descriptor (vsIndustrial /I grade PIC32MZ1024EFG100T-I/GJX)
Catatan Desain
Place one 100 nF X7R ceramic decoupling capacitor within 2 mm of every VDD/VSS ball pair on the TFBGA-100 footprint. Add four 4.7 uF bulk capacitors at each TFBGA corner. The 0.65 mm ball pitch demands laser-drilled microvias and via-in-pad is recommended for the inner-row VDD balls to minimize inductance. Follow Microchip's TB3116 'PIC32MZ EF PCB Layout Checklist' for stack-up guidance (4-layer minimum, dedicated ground plane on layer 2, VDD on layer 3).
Estimated: at 200 MHz MIPS core and typical industrial workload, the PIC32MZ1024EFK100T-E/GJX draws ~120 mA from 3.3V. The TFBGA-100 7x7 mm package has a theta_JA of approximately 28 C/W on a standard 4-layer JEDEC test board, giving a 50C junction rise over ambient. At 125C ambient this leaves ~10C margin. For closed enclosures, mount thermal vias under the central ground balls to a copper pour on the opposite side. The /E automotive grade guarantees operation up to 125C junction temperature.
Do not skip the 32.768 kHz secondary crystal on SOSC pins when using the RTCC - omitting it causes calendar drift. The dual-panel Flash feature requires explicit bootloader configuration in the FBCON0 register; many engineers forget to enable it and lose live-update capability. For USB HS OTG at 480 Mbps, keep the D+/D- traces length-matched within 150 mil and maintain 90 ohm differential impedance. The Crypto Engine needs a separate enabled fuse bit (CFGCON0.ECCCON); uninitialized engines cause BusError exceptions during AES calls.
The 12-bit 5 MSPS ADC achieves its full SNR only when the analog supply (AVDD) is filtered from the noisy digital VDD with a ferrite bead and 10 uF/100 nF Pi filter. Use the dedicated AVSS pin for analog ground return, not a shared ground via. For high-speed EBI traces to external SDRAM or QSPI PSRAM, keep trace length under 50 mm and use 50 ohm single-ended impedance with series 33 ohm source termination on clock lines.
Informasi Konformitas
AEC-Q100 qualified per /E automotive temperature descriptor -40C to +125C. RoHS and REACH compliant per Microchip product page. Lead-free and halogen-free per Microchip environmental statement.