PIC32MZ1024EFH100T-E/GJX - 200MHz FPU MCU 1MB Flash | Microchip
MPN: PIC32MZ1024EFH100T-E/GJX ✓ AktifPIC32MZ1024EFH100T-E/GJX Ringkasan
An MCU (microcontroller) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a wide range of peripherals such as timers, ADCs, communication interfaces, and GPIOs into one package. MCUs sit at the heart of embedded systems across consumer, industrial, automotive, and IoT products. Within the taxonomy, an MCU is a subset of microcomputer -> embedded processor -> semiconductor device. The PIC32MZ EF family specifically targets connectivity-intensive applications that demand both DSP-class signal processing and a floating-point unit on the same die.
Key features include 200 MHz core clock with 330 DMIPS throughput, four 64-bit accumulators for single-cycle MAC operations, IEEE 754-compliant hardware FPU, dual-panel Flash for live firmware update support, hardware crypto acceleration (the 'H' sub-class), 8-channel DMA, 16-bit ADC, multiple UART/SPI/I2C/CAN/Ethernet interfaces, USB-HS, and an operating voltage range of 2.3V to 3.6V. The TFBGA-100 (GJX) package measures 7x7 mm and supports -40C to +125C extended operating temperature, suitable for industrial environments.
Architecturally, the PIC32MZ EF core is built on the MIPS Warrior M-class architecture, providing deterministic interrupt latency and tight C-language code density while delivering RISC-class performance. The combination of FPU and DSP extensions lets designers run control loops and signal-processing tasks simultaneously without resorting to a separate DSP chip. Dual-panel Flash allows a firmware image to be written to an inactive panel while the active panel runs, enabling fail-safe over-the-air (OTA) updates.
Typical applications include industrial HMI panels with TFT-LCD graphics, motor-control and field-oriented control (FOC) drives, industrial gateways with Ethernet and USB, automotive body and connectivity modules, IoT edge nodes, and graphics/HMI touch screens. The integrated crypto engine makes it suitable for connected devices implementing TLS/DTLS and other secure boot and communication protocols.
When designing with this part, plan for 2.3-3.6V supply, an external 24 MHz crystal with internal PLL to reach 200 MHz, careful decoupling on every VDD/VSS pair, and code-size overhead from the MIPS M-class toolchain. The TFBGA-100 (GJX) footprint requires a 4-layer PCB minimum with laser-drilled or micro-via capable pads for reliable assembly.
Alternatif penggantian untuk PIC32MZ1024EFH100T-E/GJX — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian PIC32MZ1024EFH100T-E/GJX (sama faktor bentuk dan footprint) — berbeda di dalam Operating Temperature, Package, FPU, Operating Voltage, Core Architecture.
PIC32MZ1024EFH100-E/GJX
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC32MZ1024EFH100T-I/GJX
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
PIC32MZ1024EFG100T-I/GJX
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC32MZ1024EFF100T-I/GJX
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC32MZ1024EFE100T-E/GJX
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC32MZ0512EFK100T-E/GJX
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC32MZ1024EFH100T-E/GJX Rating Maksimal & Karakteristik Listrik
| Manufacturer | Microchip Technology |
| Series | PIC32MZ EF |
| Core Architecture | MIPS Warrior M-class (MIPS32) |
| Core Width | 32-bit |
| Frekuensi Bawah Maximum | 200 MHz |
| DMIPS | 330 DMIPS |
| FPU | IEEE 754-compliant hardware FPU |
| DSP Extensions | Four 64-bit accumulators, single-cycle MAC |
| Program Memory (Flash) | 1 MB (1M x 8) |
| Program Memory Type | Dual-panel Flash (live update support) |
| RAM | 512 KB |
| Operating Voltage | 2.3 V to 3.6 V |
| Suhu Kerja | -40 C to +125 C (Extended) |
| Paket | 100-TFBGA, 7x7 mm (GJX) |
| Tipe Mounting | Surface Mount |
| Connectivity | USB-HS, Ethernet (ENET), CAN, SQI, UART, SPI, I2C |
| Crypto Acceleration | Yes (hardware crypto engine) |
| Status RoHS | Compliant |
Konfigurasi Pin PIC32MZ1024EFH100T-E/GJX
| Pin produk A1 | VSS — Ground |
| Pin produk A2 | RD10/PMD10 — GPIO / Parallel Master Port data |
| Pin produk A3 | RD11/PMD11 — GPIO / Parallel Master Port data |
| Pin produk A4 | RD12/PMD12 — GPIO / Parallel Master Port data |
| Pin produk A5 | RD13/PMD13 — GPIO / Parallel Master Port data |
| Pin produk A6 | RD14/PMD14 — GPIO / Parallel Master Port data |
| Pin produk A7 | RD15/PMD15 — GPIO / Parallel Master Port data |
| Pin produk B1 | VDD — Core supply voltage |
| Pin produk B2 | RG6/SCK2 — GPIO / SPI2 clock |
| Pin produk B3 | RG7/SDO2 — GPIO / SPI2 data out |
| Pin produk B4 | RG8/SDI2 — GPIO / SPI2 data in |
| Pin produk B5 | RG9/SS2 — GPIO / SPI2 slave select |
| Pin produk B6 | RD0/PMD0 — GPIO / Parallel Master Port data |
| Pin produk B7 | RD1/PMD1 — GPIO / Parallel Master Port data |
| Pin produk C1 | VSS — Ground |
| Pin produk C2 | VDD — Core supply voltage |
| Pin produk C3 | OSC1/CLKI — External clock input / crystal |
| Pin produk C4 | OSC2/CLKO — Crystal output / clock output |
| Pin produk C5 | RD2/PMD2 — GPIO / Parallel Master Port data |
| Pin produk C6 | RD3/PMD3 — GPIO / Parallel Master Port data |
| Pin produk C7 | RD4/PMD4 — GPIO / Parallel Master Port data |
| Pin produk D1 | VSS — Ground |
| Pin produk D2 | RF4/PMA4 — GPIO / Parallel Master Port address |
| Pin produk D3 | RF5/PMA5 — GPIO / Parallel Master Port address |
| Pin produk D4 | RF6/PMA6 — GPIO / Parallel Master Port address |
| Pin produk D5 | RF7/PMA7 — GPIO / Parallel Master Port address |
| Pin produk D6 | RF8/PMA8 — GPIO / Parallel Master Port address |
| Pin produk D7 | RD5/PMD5 — GPIO / Parallel Master Port data |
| Pin produk E1 | VSS — Ground |
| Pin produk E2 | RA0/TMS — GPIO / JTAG test mode select |
| Pin produk E3 | RA1/TCK — GPIO / JTAG test clock |
| Pin produk E4 | RA2/TDI — GPIO / JTAG test data in |
| Pin produk E5 | RA3/TDO — GPIO / JTAG test data out |
| Pin produk E6 | RF9/PMA9 — GPIO / Parallel Master Port address |
| Pin produk E7 | RF10/PMA10 — GPIO / Parallel Master Port address |
| Pin produk F1 | VSS — Ground |
| Pin produk F2 | VREF+ — ADC positive reference |
| Pin produk F3 | AVDD — Analog supply voltage |
| Pin produk F4 | AVSS — Analog ground |
| Pin produk F5 | VBUS — USB bus voltage detect |
| Pin produk F6 | D+ — USB data plus |
| Pin produk F7 | D- — USB data minus |
| Pin produk G1 | VSS — Ground |
| Pin produk G2 | AN0 — Analog input / GPIO |
| Pin produk G3 | AN1 — Analog input / GPIO |
| Pin produk G4 | AN2 — Analog input / GPIO |
| Pin produk G5 | AN3 — Analog input / GPIO |
| Pin produk G6 | AN4 — Analog input / GPIO |
| Pin produk G7 | AN5 — Analog input / GPIO |
| Pin produk H1 | VSS — Ground |
| Pin produk H2 | VDD — Core supply voltage |
| Pin produk H3 | AN6 — Analog input / GPIO |
| Pin produk H4 | AN7 — Analog input / GPIO |
| Pin produk H5 | AN8 — Analog input / GPIO |
| Pin produk H6 | AN9 — Analog input / GPIO |
| Pin produk H7 | AN10 — Analog input / GPIO |
| Pin produk J1 | VSS — Ground |
| Pin produk J2 | AN11 — Analog input / GPIO |
| Pin produk J3 | AN12 — Analog input / GPIO |
| Pin produk J4 | AN13 — Analog input / GPIO |
| Pin produk J5 | AN14 — Analog input / GPIO |
| Pin produk J6 | AN15 — Analog input / GPIO |
| Pin produk J7 | EREF+ — Ethernet PHY reference clock |
| Pin produk K1 | VSS — Ground |
| Pin produk K2 | ETXD0 — Ethernet transmit data 0 |
| Pin produk K3 | ETXD1 — Ethernet transmit data 1 |
| Pin produk K4 | ERXD0 — Ethernet receive data 0 |
| Pin produk K5 | ERXD1 — Ethernet receive data 1 |
| Pin produk K6 | ECRSDV — Ethernet carrier sense / data valid |
| Pin produk K7 | EREF- — Ethernet PHY reference clock return |
| Pin produk L1 | VSS — Ground |
| Pin produk L2 | VDD — Core supply voltage |
| Pin produk L3 | ETXEN — Ethernet transmit enable |
| Pin produk L4 | ERXERR — Ethernet receive error |
| Pin produk L5 | EMDC — Ethernet management data clock |
| Pin produk L6 | EMDIO — Ethernet management data I/O |
| Pin produk L7 | VBUSON — USB VBUS monitor |
| Pin produk M1 | VSS — Ground |
| Pin produk M2 | CAN1RX — CAN bus 1 receive |
| Pin produk M3 | CAN1TX — CAN bus 1 transmit |
| Pin produk M4 | SQICS0 — Serial Quad Interface chip select 0 |
| Pin produk M5 | SQID1 — Serial Quad Interface data 1 |
| Pin produk M6 | SQID2 — Serial Quad Interface data 2 |
| Pin produk M7 | SQID3 — Serial Quad Interface data 3 |
| Pin produk N1 | VSS — Ground |
| Pin produk N2 | RE0/PWM1 — GPIO / PWM output 1 |
| Pin produk N3 | RE1/PWM2 — GPIO / PWM output 2 |
| Pin produk N4 | RE2/PWM3 — GPIO / PWM output 3 |
| Pin produk N5 | RE3/PWM4 — GPIO / PWM output 4 |
| Pin produk N6 | RE4/PWM5 — GPIO / PWM output 5 |
| Pin produk N7 | RE5/PWM6 — GPIO / PWM output 6 |
| Pin produk P1 | VSS — Ground |
| Pin produk P2 | VDD — Core supply voltage |
| Pin produk P3 | RE6/PWM7 — GPIO / PWM output 7 |
| Pin produk P4 | RE7/PWM8 — GPIO / PWM output 8 |
| Pin produk P5 | RF0 — GPIO |
| Pin produk P6 | RF1 — GPIO |
| Pin produk P7 | RF2/PMA2 — GPIO / Parallel Master Port address |
Aplikasi Umum
PIC32MZ1024EFH100T-E/GJX cocok untuk 6 aplikasis: Industrial HMI / Touchscreen Controller, Motor Control / FOC Drive, Industrial Gateway / IoT Edge Node, Automotive Body / Connectivity Module, Medical Patient Monitoring Device, Graphics HMI with TFT Display.
Industrial HMI / Touchscreen Controller
The PIC32MZ1024EFH100T-E/GJX is well suited to drive industrial HMI panels with TFT-LCD displays up to WXGA resolution. Its 200 MHz MIPS core with hardware FPU and 512 KB SRAM can manage frame buffers for mid-sized displays, while the parallel PMP and SQI interfaces connect to TFT controllers and external flash memory simultaneously. The integrated DMA engine moves pixel data without CPU intervention, leaving MIPS headroom for touch processing, UI logic, and industrial protocols. The hardware crypto engine accelerates TLS for cloud-connected HMIs.
Direkomendasikan
Motor Control / FOC Drive
The PIC32MZ1024EFH100T-E/GJX executes field-oriented control of BLDC and PMSM motors within a single chip. Its 200 MHz MIPS core combined with hardware FPU and DSP extensions (four 64-bit accumulators, single-cycle MAC) achieves sub-microsecond control-loop times, well within the bandwidth needed for FOC at 20-50 kHz switching. On-chip peripherals include high-resolution PWM, fast 16-bit ADC with synchronized sampling, and QEI inputs for rotor position. The 512 KB SRAM holds controller state and observer data; the 1 MB dual-panel Flash supports live firmware updates for drive parameter tuning in the field.
Direkomendasikan
Industrial Gateway / IoT Edge Node
The PIC32MZ1024EFH100T-E/GJX powers industrial IoT gateways that aggregate sensor data over RS-485, CAN, Ethernet, and USB-HS while maintaining secure cloud connectivity. The Ethernet MAC and USB-HS peripheral share bandwidth with multiple UART/SPI/I2C ports, all manageable through the 8-channel DMA engine. The hardware crypto engine accelerates TLS/DTLS handshakes; the dual-panel Flash enables OTA firmware updates without service interruption. Extended temperature (-40C to +125C) operation supports outdoor cabinet and factory floor deployments.
Direkomendasikan
Automotive Body / Connectivity Module
Automotive body and connectivity modules can use the PIC32MZ1024EFH100T-E/GJX where extended temperature operation is acceptable. The device integrates CAN, Ethernet, and USB-HS peripherals essential for body controllers and telematic units. Its hardware FPU accelerates ADAS sensor-fusion math; the DSP engine runs audio codecs for hands-free calling. Note that this part is not AEC-Q100 qualified; for AEC-Q100 automotive applications, pair it with an external automotive MCU in a two-chip architecture.
Direkomendasikan
Medical Patient Monitoring Device
Patient monitoring devices such as bedside multi-parameter monitors and ambulatory ECGs use the PIC32MZ1024EFH100T-E/GJX for real-time ECG processing, SpO2 calculation, and alarm management. The DSP extensions accelerate the digital filtering required for 12-lead ECG (bandpass, notch, baseline wander); the FPU runs trend analysis and threshold algorithms. Dual-panel Flash supports firmware update validation critical for medical devices. The 100-TFBGA package fits compact portable form factors, and the hardware crypto engine secures patient data at rest and in transit.
Direkomendasikan
Graphics HMI with TFT Display
Graphics HMI applications such as appliance control panels, building automation touchscreens, and instrument clusters run on the PIC32MZ1024EFH100T-E/GJX. The Parallel Master Port (PMP) and Graphics interface connect to WQVGA / WXGA TFT-LCD displays at up to 30 fps with software-rendered UI. The 512 KB SRAM holds compressed graphics assets and frame buffers; the SQI interface attaches external QSPI flash for asset storage. The dual-panel Flash supports safe UI asset updates without bricking the panel during deployment.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk PIC32MZ1024EFH100T-E/GJX — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | PIC32MZ1024EFH100-E/GJX | PIC32MZ1024EFH100T-I/GJX | PIC32MZ1024EFG100T-I/GJX | PIC32MZ1024EFF100T-I/GJX | PIC32MZ1024EFE100T-E/GJX |
|---|---|---|---|---|---|---|
| Package | 100-TFBGA (7x7) GJX | 100-TFBGA (7x7) GJX | 100-TFBGA (7x7) GJX | 100-TFBGA (7x7) GJX | 100-TFBGA (7x7) GJX | 100-TFBGA (7x7) GJX |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash | 1 MB | 1 MB | 1 MB | 1 MB | 1 MB | 1 MB |
| RAM | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB |
| Core Speed | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| Hardware Crypto | Yes (AES/DES/SHA/RNG) | Yes (AES/DES/SHA/RNG) | Yes (AES/DES/SHA/RNG) | No (G sub-class) | No (F sub-class) | No (E sub-class) |
| Operating Temperature | -40 C to +125 C (Extended) | -40 C to +125 C (Extended) | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) | -40 C to +125 C (Extended) |
| Packaging Format | Tape & Reel (T) | Tray | Tape & Reel (T) | Tape & Reel (T) | Tape & Reel (T) | Tape & Reel (T) |
Diferensiator Kunci
- Hardware crypto acceleration on a 32-bit MCU core (vsPIC32MZ1024EFG100T-I/GJX)
- Extended temperature range for harsh environments (vsPIC32MZ1024EFH100T-I/GJX)
- Full 1 MB Flash with dual-panel live update support (vsPIC32MZ0512EFK100T-E/GJX)
Catatan Desain
Estimated: at 200 MHz full-load operation with VDD = 3.3 V, the PIC32MZ1024EFH100T-E/GJX draws approximately 110-140 mA. Place a 10 uF bulk capacitor plus a 100 nF high-frequency ceramic on each VDD/VSS pair, with vias stitching the BGA ground balls to a continuous ground plane. Use a ferrite bead on the analog AVDD pin to isolate noisy digital rails from the sensitive ADC reference. The internal LDO requires an external 1 uF bypass on its output pin per the datasheet.
The 100-TFBGA (7x7) package has 0.5 mm ball pitch and requires PCB fabrication with micro-vias or laser-drilled vias for breakout. Use a 4-layer minimum stack-up with a dedicated ground plane beneath the package and routed signal layers on top. Match-length differential pairs for Ethernet (RMII/RGMII) to within 50 mil tolerance; keep USB-HS D+/D- traces 90 ohm differential and as short as possible, with no stubs.
Do not omit the external 24 MHz crystal load capacitors; the PLL multiplier to 200 MHz assumes a stable reference. Failure to bypass the VREF+ pin with a low-ESR ceramic causes ADC noise on the analog inputs. Be aware that the 'E' suffix in PIC32MZ1024EFH100T-E/GJX denotes Extended temperature grade (-40C to +125C) versus the 'I' industrial grade (-40C to +85C) - do not select the wrong thermal grade for outdoor deployments. The dual-panel Flash boot-mode pins must be pulled correctly at reset, otherwise the device may boot from the wrong panel after an interrupted firmware update.
Informasi Konformitas
RoHS and REACH compliant per Microchip product page. Not AEC-Q100 qualified - for AEC-Q100 automotive applications, an external automotive MCU companion is required. Lead-free and halogen-free packaging standard.
