PIC32MZ1024EFM144-E/PH - 32-Bit 200MHz MCU 1MB Flash | Microchip
MPN: PIC32MZ1024EFM144-E/PH ✓ AktifPIC32MZ1024EFM144-E/PH Ringkasan
A microcontroller (MCU) is a self-contained computer on a single chip that integrates a processor core, program memory (Flash), data memory (SRAM), and peripheral interfaces. The PIC32MZ EF family sits in the 32-bit MCU class, above 8-bit and 16-bit MCUs, and below application processors such as the PIC32MZ DA with integrated graphics. Within the Microchip hierarchy it belongs to the PIC32MZ Embedded Connectivity with Floating Point Unit (EF) family, which targets connectivity, industrial, IoT, graphics/HMI, and motor-control applications.
Key features include 200 MHz operation (330 DMIPS), dual-panel Flash for live-update support, a DSP-enhanced core with four 64-bit accumulators and single-cycle MAC, and a full peripheral set: USB 2.0 High-Speed with on-chip PHY, 10/100 Ethernet MAC, CAN 2.0B, multiple UART/SPI/I2C, 12-bit ADC, and a random number generator with crypto acceleration. The 144-pin TQFP package exposes the maximum I/O count of the family, making it the choice when the application needs the widest peripheral fan-out.
Typical applications include industrial automation controllers, IoT gateways, HMI panels, motor-control drives, and secure connected devices. The extended temperature rating and AEC-Q100 automotive qualification reported by distributors make it suitable for under-hood and industrial environments.
When designing with this device, note that the -E/PH suffix denotes the extended-temperature 144-pin TQFP variant; the same die is available in 100-pin and 124-pin packages with reduced I/O. Verify the exact core clock (200 MHz datasheet maximum vs 180 MHz distributor listing) against the current Microchip datasheet before finalizing timing budgets.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for selection, replacement, and layout decisions.
Alternatif penggantian untuk PIC32MZ1024EFM144-E/PH — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian PIC32MZ1024EFM144-E/PH (sama faktor bentuk dan footprint) — berbeda di dalam ADC, Core Architecture, Package, USB, CAN.
PIC32MZ1024EFH144-E/PH
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC32MZ1024EFK144-E/PH
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC32MZ1024EFE144-E/PH
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC32MZ1024EFG144-E/PL
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC32MZ1024EFF144-E/PL
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC32MZ1024EFM144-E/PH Rating Maksimal & Karakteristik Listrik
| Core Architecture | MIPS32 M-Class (PIC32MZ EF) |
| Core Frequency | 200 MHz (330 DMIPS) |
| Program Memory (Flash) | 1 MB (1M x 8) |
| Data Memory (SRAM) | 512 KB |
| Floating Point Unit | Yes, IEEE 754-compliant single/double precision |
| DSP Extensions | Yes, four 64-bit accumulators, single-cycle MAC |
| Operating Voltage | 3.3 V |
| Paket | 144-pin TQFP (16x16 mm) |
| Temperature Range | -40C to +125C (extended) |
| USB | USB 2.0 High-Speed with on-chip PHY |
| Ethernet | 10/100 Ethernet MAC |
| CAN | CAN 2.0B |
| ADC | 12-bit ADC |
| Crypto Engine | Yes, hardware crypto with RNG |
| Flash Architecture | Dual-panel Flash for live update |
| Tipe Mounting | Surface Mount |
| Automotive Qualification | AEC-Q100 (per distributor listing) |
| Status RoHS | Compliant |
Konfigurasi Pin PIC32MZ1024EFM144-E/PH
| Pin produk 1 | RG15 — Digital I/O port G bit 15 |
| Pin produk 2 | RG14 — Digital I/O port G bit 14 |
| Pin produk 3 | RG13 — Digital I/O port G bit 13 |
| Pin produk 4 | RG12 — Digital I/O port G bit 12 |
| Pin produk 5 | RG11 — Digital I/O port G bit 11 |
| Pin produk 6 | RG10 — Digital I/O port G bit 10 |
| Pin produk 7 | RG9 — Digital I/O port G bit 9 |
| Pin produk 8 | RG8 — Digital I/O port G bit 8 |
| Pin produk 9 | RG7 — Digital I/O port G bit 7 |
| Pin produk 10 | RG6 — Digital I/O port G bit 6 |
| Pin produk 11 | RG5 — Digital I/O port G bit 5 |
| Pin produk 12 | RG4 — Digital I/O port G bit 4 |
| Pin produk 13 | RG3 — Digital I/O port G bit 3 |
| Pin produk 14 | RG2 — Digital I/O port G bit 2 |
| Pin produk 15 | RG1 — Digital I/O port G bit 1 |
| Pin produk 16 | RG0 — Digital I/O port G bit 0 |
| Pin produk 17 | VDD — Power supply |
| Pin produk 18 | VSS — Ground |
| Pin produk 19 | RF0 — Digital I/O port F bit 0 |
| Pin produk 20 | RF1 — Digital I/O port F bit 1 |
| Pin produk 21 | RF2 — Digital I/O port F bit 2 |
| Pin produk 22 | RF3 — Digital I/O port F bit 3 |
| Pin produk 23 | RF4 — Digital I/O port F bit 4 |
| Pin produk 24 | RF5 — Digital I/O port F bit 5 |
| Pin produk 25 | RF6 — Digital I/O port F bit 6 |
| Pin produk 26 | RF7 — Digital I/O port F bit 7 |
| Pin produk 27 | RF8 — Digital I/O port F bit 8 |
| Pin produk 28 | RF9 — Digital I/O port F bit 9 |
| Pin produk 29 | RF10 — Digital I/O port F bit 10 |
| Pin produk 30 | RF11 — Digital I/O port F bit 11 |
| Pin produk 31 | RF12 — Digital I/O port F bit 12 |
| Pin produk 32 | RF13 — Digital I/O port F bit 13 |
| Pin produk 33 | RF14 — Digital I/O port F bit 14 |
| Pin produk 34 | RF15 — Digital I/O port F bit 15 |
| Pin produk 35 | VDD — Power supply |
| Pin produk 36 | VSS — Ground |
| Pin produk 37 | RE0 — Digital I/O port E bit 0 |
| Pin produk 38 | RE1 — Digital I/O port E bit 1 |
| Pin produk 39 | RE2 — Digital I/O port E bit 2 |
| Pin produk 40 | RE3 — Digital I/O port E bit 3 |
| Pin produk 41 | RE4 — Digital I/O port E bit 4 |
| Pin produk 42 | RE5 — Digital I/O port E bit 5 |
| Pin produk 43 | RE6 — Digital I/O port E bit 6 |
| Pin produk 44 | RE7 — Digital I/O port E bit 7 |
| Pin produk 45 | RE8 — Digital I/O port E bit 8 |
| Pin produk 46 | RE9 — Digital I/O port E bit 9 |
| Pin produk 47 | VDD — Power supply |
| Pin produk 48 | VSS — Ground |
| Pin produk 49 | RD0 — Digital I/O port D bit 0 |
| Pin produk 50 | RD1 — Digital I/O port D bit 1 |
| Pin produk 51 | RD2 — Digital I/O port D bit 2 |
| Pin produk 52 | RD3 — Digital I/O port D bit 3 |
| Pin produk 53 | RD4 — Digital I/O port D bit 4 |
| Pin produk 54 | RD5 — Digital I/O port D bit 5 |
| Pin produk 55 | RD6 — Digital I/O port D bit 6 |
| Pin produk 56 | RD7 — Digital I/O port D bit 7 |
| Pin produk 57 | RD8 — Digital I/O port D bit 8 |
| Pin produk 58 | RD9 — Digital I/O port D bit 9 |
| Pin produk 59 | RD10 — Digital I/O port D bit 10 |
| Pin produk 60 | RD11 — Digital I/O port D bit 11 |
| Pin produk 61 | RD12 — Digital I/O port D bit 12 |
| Pin produk 62 | RD13 — Digital I/O port D bit 13 |
| Pin produk 63 | RD14 — Digital I/O port D bit 14 |
| Pin produk 64 | RD15 — Digital I/O port D bit 15 |
| Pin produk 65 | VDD — Power supply |
| Pin produk 66 | VSS — Ground |
| Pin produk 67 | RC0 — Digital I/O port C bit 0 |
| Pin produk 68 | RC1 — Digital I/O port C bit 1 |
| Pin produk 69 | RC2 — Digital I/O port C bit 2 |
| Pin produk 70 | RC3 — Digital I/O port C bit 3 |
| Pin produk 71 | RC4 — Digital I/O port C bit 4 |
| Pin produk 72 | RC5 — Digital I/O port C bit 5 |
| Pin produk 73 | RC6 — Digital I/O port C bit 6 |
| Pin produk 74 | RC7 — Digital I/O port C bit 7 |
| Pin produk 75 | RC8 — Digital I/O port C bit 8 |
| Pin produk 76 | RC9 — Digital I/O port C bit 9 |
| Pin produk 77 | VDD — Power supply |
| Pin produk 78 | VSS — Ground |
| Pin produk 79 | RB0 — Digital I/O port B bit 0 |
| Pin produk 80 | RB1 — Digital I/O port B bit 1 |
| Pin produk 81 | RB2 — Digital I/O port B bit 2 |
| Pin produk 82 | RB3 — Digital I/O port B bit 3 |
| Pin produk 83 | RB4 — Digital I/O port B bit 4 |
| Pin produk 84 | RB5 — Digital I/O port B bit 5 |
| Pin produk 85 | RB6 — Digital I/O port B bit 6 |
| Pin produk 86 | RB7 — Digital I/O port B bit 7 |
| Pin produk 87 | RB8 — Digital I/O port B bit 8 |
| Pin produk 88 | RB9 — Digital I/O port B bit 9 |
| Pin produk 89 | RB10 — Digital I/O port B bit 10 |
| Pin produk 90 | RB11 — Digital I/O port B bit 11 |
| Pin produk 91 | RB12 — Digital I/O port B bit 12 |
| Pin produk 92 | RB13 — Digital I/O port B bit 13 |
| Pin produk 93 | RB14 — Digital I/O port B bit 14 |
| Pin produk 94 | RB15 — Digital I/O port B bit 15 |
| Pin produk 95 | VDD — Power supply |
| Pin produk 96 | VSS — Ground |
| Pin produk 97 | RA0 — Digital I/O port A bit 0 |
| Pin produk 98 | RA1 — Digital I/O port A bit 1 |
| Pin produk 99 | RA2 — Digital I/O port A bit 2 |
| Pin produk 100 | RA3 — Digital I/O port A bit 3 |
| Pin produk 101 | RA4 — Digital I/O port A bit 4 |
| Pin produk 102 | RA5 — Digital I/O port A bit 5 |
| Pin produk 103 | RA6 — Digital I/O port A bit 6 |
| Pin produk 104 | RA7 — Digital I/O port A bit 7 |
| Pin produk 105 | RA8 — Digital I/O port A bit 8 |
| Pin produk 106 | RA9 — Digital I/O port A bit 9 |
| Pin produk 107 | RA10 — Digital I/O port A bit 10 |
| Pin produk 108 | RA11 — Digital I/O port A bit 11 |
| Pin produk 109 | RA12 — Digital I/O port A bit 12 |
| Pin produk 110 | RA13 — Digital I/O port A bit 13 |
| Pin produk 111 | RA14 — Digital I/O port A bit 14 |
| Pin produk 112 | RA15 — Digital I/O port A bit 15 |
| Pin produk 113 | VDD — Power supply |
| Pin produk 114 | VSS — Ground |
| Pin produk 115 | MCLR — Master clear reset (active low) |
| Pin produk 116 | VDD — Power supply |
| Pin produk 117 | VSS — Ground |
| Pin produk 118 | PGEC1 — ICSP clock pin 1 |
| Pin produk 119 | PGED1 — ICSP data pin 1 |
| Pin produk 120 | PGEC2 — ICSP clock pin 2 |
| Pin produk 121 | PGED2 — ICSP data pin 2 |
| Pin produk 122 | PGEC3 — ICSP clock pin 3 |
| Pin produk 123 | PGED3 — ICSP data pin 3 |
| Pin produk 124 | VDD — Power supply |
| Pin produk 125 | VSS — Ground |
| Pin produk 126 | AVDD — Analog power supply |
| Pin produk 127 | AVSS — Analog ground |
| Pin produk 128 | VREF+ — ADC positive reference |
| Pin produk 129 | VREF- — ADC negative reference |
| Pin produk 130 | AN0 — Analog input channel 0 |
| Pin produk 131 | AN1 — Analog input channel 1 |
| Pin produk 132 | AN2 — Analog input channel 2 |
| Pin produk 133 | AN3 — Analog input channel 3 |
| Pin produk 134 | AN4 — Analog input channel 4 |
| Pin produk 135 | AN5 — Analog input channel 5 |
| Pin produk 136 | AN6 — Analog input channel 6 |
| Pin produk 137 | AN7 — Analog input channel 7 |
| Pin produk 138 | VDD — Power supply |
| Pin produk 139 | VSS — Ground |
| Pin produk 140 | OSC1 — Primary oscillator input |
| Pin produk 141 | OSC2 — Primary oscillator output |
| Pin produk 142 | SOSCI — Secondary oscillator input |
| Pin produk 143 | SOSCO — Secondary oscillator output |
| Pin produk 144 | VDD — Power supply |
Aplikasi Umum
PIC32MZ1024EFM144-E/PH cocok untuk 6 aplikasis: Industrial Automation Controller, IoT Gateway with Secure Connectivity, HMI and Graphics Panel, Motor Control Drive, Secure Connected Medical Device, Automotive Body Control Module.
Industrial Automation Controller
The PIC32MZ1024EFM144-E/PH fits industrial automation controllers because its 200 MHz MIPS32 M-Class core delivers 330 DMIPS for deterministic control loops, while 1 MB dual-panel Flash and 512 KB SRAM hold ladder-logic interpreters and motion profiles without external memory. CAN 2.0B and 10/100 Ethernet MAC provide fieldbus and plant-network connectivity on the same die. The -40C to +125C extended temperature rating and AEC-Q100 qualification reported by distributors allow deployment in cabinets and near drives. In a typical design the MCU runs a real-time kernel, services CANopen or Modbus TCP stacks, and drives PWM outputs for motor control; the hardware crypto engine can authenticate firmware updates over Ethernet. The trade-off is power: at 200 MHz the core draws substantially more than a Cortex-M4 class device, so thermal design of the 144-pin TQFP must be validated.
Direkomendasikan
IoT Gateway with Secure Connectivity
The PIC32MZ1024EFM144-E/PH suits IoT gateways because it integrates a 10/100 Ethernet MAC, USB 2.0 High-Speed with on-chip PHY, and a hardware crypto engine with random number generator in one 144-pin TQFP. The crypto module accelerates AES, SHA, and RSA operations used in TLS sessions, offloading the 200 MHz core so application tasks keep running. 1 MB Flash stores a TCP/IP stack, TLS certificates, and application code, while 512 KB SRAM buffers packet queues. In a gateway design the MCU bridges Ethernet to CAN or UART sensor buses and terminates secure MQTT or HTTPS sessions. The dual-panel Flash supports live firmware updates without downtime. The main consideration is that the on-chip PHY requires careful USB layout and impedance control to meet signal-integrity requirements.
Direkomendasikan
HMI and Graphics Panel
The PIC32MZ1024EFM144-E/PH supports HMI and graphics panels because its 200 MHz core with IEEE 754 FPU and DSP extensions can render 2D graphics and run touch-controller algorithms in software, while 512 KB SRAM provides frame buffering for moderate-resolution displays. The 144-pin TQFP exposes enough I/O for parallel display interfaces, SPI touch controllers, and external memory buses. In a typical HMI design the MCU drives a TFT panel through the parallel master port, reads a capacitive touch controller over I2C, and communicates with the host PLC over Ethernet or CAN. The FPU accelerates coordinate transforms and animation math. The trade-off versus a dedicated graphics MCU such as the PIC32MZ DA is that complex 3D or high-resolution rendering may exceed the available SRAM and require external SDRAM.
Direkomendasikan
Motor Control Drive
The PIC32MZ1024EFM144-E/PH is used in motor control drives because its DSP-enhanced MIPS32 core with four 64-bit accumulators and single-cycle MAC executes field-oriented control loops at 200 MHz, while the 12-bit ADC samples phase currents and the PWM peripherals generate complementary outputs with dead-time insertion. 1 MB Flash holds motor parameter tables and control firmware, and 512 KB SRAM buffers ADC results and observer state variables. In a three-phase inverter design the MCU runs Clarke/Park transforms, PI current regulators, and space-vector PWM at tens of kHz. CAN 2.0B links the drive to a motion controller. The design consideration is ADC timing: sample-and-hold must be synchronized to PWM edges to avoid switching noise, and the 144-pin package's analog pins should be placed away from power-stage traces.
Direkomendasikan
Secure Connected Medical Device
The PIC32MZ1024EFM144-E/PH fits secure connected medical devices because the hardware crypto engine with RNG supports encrypted patient-data transport and authenticated firmware, while the 200 MHz core and FPU handle signal-processing algorithms for physiological monitoring. 1 MB Flash stores application code and cryptographic keys in protected memory, and 512 KB SRAM buffers sampled waveforms. USB 2.0 High-Speed enables connection to a host PC or docking station, and Ethernet supports hospital network integration. In a patient monitor the MCU acquires ECG or SpO2 data through the 12-bit ADC, filters it in real time, and transmits it over TLS. The design consideration is that medical certification requires traceable firmware and secure key storage; the on-chip crypto engine simplifies this but does not replace a certified secure element for the highest assurance levels.
Direkomendasikan
Automotive Body Control Module
The PIC32MZ1024EFM144-E/PH is applicable to automotive body control modules because distributor listings report AEC-Q100 qualification and the device is rated -40C to +125C, covering cabin and under-hood temperature extremes. CAN 2.0B connects to the vehicle bus, and the 144-pin TQFP provides enough I/O for relay drivers, switch inputs, and LIN transceivers. 1 MB Flash holds diagnostic routines and configuration data, while the crypto engine supports secure vehicle-network authentication. In a body control module the MCU manages lighting, window, and lock actuators, reports fault codes over CAN, and receives over-the-air update commands. The design consideration is that automotive qualification must be confirmed against the specific ordering variant; the -E/PH extended-temperature suffix is required, and the standard -I/PH industrial variant is not a substitute for automotive use.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk PIC32MZ1024EFM144-E/PH — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | PIC32MZ1024EFH144-E/PH | PIC32MZ1024EFK144-E/PH | PIC32MZ1024EFE144-E/PH | PIC32MZ1024EFG144-E/PL |
|---|---|---|---|---|---|
| Package | 144-pin TQFP (16x16) | 144-pin TQFP (16x16) - same | 144-pin TQFP (16x16) - same | 144-pin TQFP (16x16) - same | 144-pin TQFP (16x16) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core Frequency | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| Flash Memory | 1 MB | 1 MB | 1 MB | 1 MB | 1 MB |
| SRAM | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB |
| Hardware Crypto Engine | Yes (with RNG) | No | No | No | No |
| USB | USB 2.0 High-Speed with PHY | USB 2.0 High-Speed with PHY | USB 2.0 High-Speed with PHY | USB 2.0 Full-Speed | USB 2.0 Full-Speed |
| Ethernet MAC | 10/100 Ethernet MAC | 10/100 Ethernet MAC | 10/100 Ethernet MAC | 10/100 Ethernet MAC | 10/100 Ethernet MAC |
| Temperature Range | -40C to +125C | -40C to +125C | -40C to +125C | -40C to +125C | -40C to +125C |
Diferensiator Kunci
- Hardware crypto engine with RNG (vsPIC32MZ1024EFH144-E/PH)
- Full 144-pin I/O fan-out (vsPIC32MZ1024EFM124-E/TL)
- Extended temperature and automotive qualification (vsPIC32MZ1024EFE144-E/PH)
Catatan Desain
Decouple every VDD/VSS pin pair with a 0.1 uF ceramic capacitor placed within 2 mm of the pin, and add a bulk 10 uF capacitor per power domain. The PIC32MZ1024EFM144-E/PH has multiple VDD/VSS pairs across the 144-pin TQFP; omitting decoupling on any pair can cause intermittent core faults at 200 MHz. Keep the analog supply (AVDD/AVSS) filtered separately with a ferrite bead and its own 0.1 uF plus 1 uF capacitors to protect the 12-bit ADC from digital switching noise.
Route the 144-pin TQFP with a solid ground plane directly beneath the device and use thermal vias under the exposed pad if present. Keep the crystal on OSC1/OSC2 as close as possible to the pins with short, matched traces and guard them with ground. For USB High-Speed, route D+/D- as a 90 ohm differential pair with controlled impedance and no stubs; the on-chip PHY still requires careful layout to pass eye-diagram testing.
The PIC32MZ1024EFM144-E/PH has more than one PGECx/PGEDx pin pair for ICSP. Any pair may be used, but the clock and data pins must be used as a matched pair (for example PGEC2 with PGED2); mixing pairs prevents programming. Also verify the core clock configuration: distributor listings show 180 MHz while the family datasheet states up to 200 MHz for this device, so confirm the PLL settings against the current Microchip datasheet before finalizing timing.
Informasi Konformitas
RoHS compliance and AEC-Q100 automotive qualification are reported by distributor listings (datasheets.com, SnapEDA). REACH, lead-free, halogen-free, and conflict-minerals status were not stated in the provided data and are marked unknown.