PIC32MZ1024EFM144-E/PH - 32-Bit 200MHz MCU 1MB Flash | Microchip
부품 번호: PIC32MZ1024EFM144-E/PH ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $18.5 | $18.50 |
| 10 | $16.95 | $169.50 |
| 100 | $15.4 | $1,540.00 |
| 500 | $14.2 | $7,100.00 |
| 1,000 | $13.1 | $13,100.00 |
PIC32MZ1024EFM144-E/PH 개요
A microcontroller (MCU) is a self-contained computer on a single chip that integrates a processor core, program memory (Flash), data memory (SRAM), and peripheral interfaces. The PIC32MZ EF family sits in the 32-bit MCU class, above 8-bit and 16-bit MCUs, and below application processors such as the PIC32MZ DA with integrated graphics. Within the Microchip hierarchy it belongs to the PIC32MZ Embedded Connectivity with Floating Point Unit (EF) family, which targets connectivity, industrial, IoT, graphics/HMI, and motor-control applications.
Key features include 200 MHz operation (330 DMIPS), dual-panel Flash for live-update support, a DSP-enhanced core with four 64-bit accumulators and single-cycle MAC, and a full peripheral set: USB 2.0 High-Speed with on-chip PHY, 10/100 Ethernet MAC, CAN 2.0B, multiple UART/SPI/I2C, 12-bit ADC, and a random number generator with crypto acceleration. The 144-pin TQFP package exposes the maximum I/O count of the family, making it the choice when the application needs the widest peripheral fan-out.
Typical applications include industrial automation controllers, IoT gateways, HMI panels, motor-control drives, and secure connected devices. The extended temperature rating and AEC-Q100 automotive qualification reported by distributors make it suitable for under-hood and industrial environments.
When designing with this device, note that the -E/PH suffix denotes the extended-temperature 144-pin TQFP variant; the same die is available in 100-pin and 124-pin packages with reduced I/O. Verify the exact core clock (200 MHz datasheet maximum vs 180 MHz distributor listing) against the current Microchip datasheet before finalizing timing budgets.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for selection, replacement, and layout decisions.
드롭인 대체품: PIC32MZ1024EFM144-E/PH — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC32MZ1024EFM144-E/PH (동일 폼 팩터 및 풋프린트) — 차이점: ADC, Core Architecture, Package, USB, CAN.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
PIC32MZ1024EFH144-E/PH
✅ 드롭인✓ 재고 있음
$11.2 / 개
데이터시트 보기 →PIC32MZ1024EFK144-E/PH
✅ 드롭인✓ 재고 있음
$8.1 / 개
데이터시트 보기 →PIC32MZ1024EFE144-E/PH
✅ 드롭인✓ 재고 있음
$11.05 / 개
데이터시트 보기 →PIC32MZ1024EFG144-E/PL
✅ 드롭인✓ 재고 있음
$9.05 / 개
데이터시트 보기 →PIC32MZ1024EFF144-E/PL
✅ 드롭인✓ 재고 있음
$9.3 / 개
데이터시트 보기 →PIC32MZ1024EFM144-E/PH 최대 정격 & 전기적 특성
| Core Architecture | MIPS32 M-Class (PIC32MZ EF) |
| Core Frequency | 200 MHz (330 DMIPS) |
| Program Memory (Flash) | 1 MB (1M x 8) |
| Data Memory (SRAM) | 512 KB |
| Floating Point Unit | Yes, IEEE 754-compliant single/double precision |
| DSP Extensions | Yes, four 64-bit accumulators, single-cycle MAC |
| Operating Voltage | 3.3 V |
| 패키지 | 144-pin TQFP (16x16 mm) |
| Temperature Range | -40C to +125C (extended) |
| USB | USB 2.0 High-Speed with on-chip PHY |
| Ethernet | 10/100 Ethernet MAC |
| CAN | CAN 2.0B |
| ADC | 12-bit ADC |
| Crypto Engine | Yes, hardware crypto with RNG |
| Flash Architecture | Dual-panel Flash for live update |
| 실장 유형 | Surface Mount |
| Automotive Qualification | AEC-Q100 (per distributor listing) |
| RoHS 상태 | Compliant |
PIC32MZ1024EFM144-E/PH 핀 구성
| 핀 1 | RG15 — Digital I/O port G bit 15 |
| 핀 2 | RG14 — Digital I/O port G bit 14 |
| 핀 3 | RG13 — Digital I/O port G bit 13 |
| 핀 4 | RG12 — Digital I/O port G bit 12 |
| 핀 5 | RG11 — Digital I/O port G bit 11 |
| 핀 6 | RG10 — Digital I/O port G bit 10 |
| 핀 7 | RG9 — Digital I/O port G bit 9 |
| 핀 8 | RG8 — Digital I/O port G bit 8 |
| 핀 9 | RG7 — Digital I/O port G bit 7 |
| 핀 10 | RG6 — Digital I/O port G bit 6 |
| 핀 11 | RG5 — Digital I/O port G bit 5 |
| 핀 12 | RG4 — Digital I/O port G bit 4 |
| 핀 13 | RG3 — Digital I/O port G bit 3 |
| 핀 14 | RG2 — Digital I/O port G bit 2 |
| 핀 15 | RG1 — Digital I/O port G bit 1 |
| 핀 16 | RG0 — Digital I/O port G bit 0 |
| 핀 17 | VDD — Power supply |
| 핀 18 | VSS — Ground |
| 핀 19 | RF0 — Digital I/O port F bit 0 |
| 핀 20 | RF1 — Digital I/O port F bit 1 |
| 핀 21 | RF2 — Digital I/O port F bit 2 |
| 핀 22 | RF3 — Digital I/O port F bit 3 |
| 핀 23 | RF4 — Digital I/O port F bit 4 |
| 핀 24 | RF5 — Digital I/O port F bit 5 |
| 핀 25 | RF6 — Digital I/O port F bit 6 |
| 핀 26 | RF7 — Digital I/O port F bit 7 |
| 핀 27 | RF8 — Digital I/O port F bit 8 |
| 핀 28 | RF9 — Digital I/O port F bit 9 |
| 핀 29 | RF10 — Digital I/O port F bit 10 |
| 핀 30 | RF11 — Digital I/O port F bit 11 |
| 핀 31 | RF12 — Digital I/O port F bit 12 |
| 핀 32 | RF13 — Digital I/O port F bit 13 |
| 핀 33 | RF14 — Digital I/O port F bit 14 |
| 핀 34 | RF15 — Digital I/O port F bit 15 |
| 핀 35 | VDD — Power supply |
| 핀 36 | VSS — Ground |
| 핀 37 | RE0 — Digital I/O port E bit 0 |
| 핀 38 | RE1 — Digital I/O port E bit 1 |
| 핀 39 | RE2 — Digital I/O port E bit 2 |
| 핀 40 | RE3 — Digital I/O port E bit 3 |
| 핀 41 | RE4 — Digital I/O port E bit 4 |
| 핀 42 | RE5 — Digital I/O port E bit 5 |
| 핀 43 | RE6 — Digital I/O port E bit 6 |
| 핀 44 | RE7 — Digital I/O port E bit 7 |
| 핀 45 | RE8 — Digital I/O port E bit 8 |
| 핀 46 | RE9 — Digital I/O port E bit 9 |
| 핀 47 | VDD — Power supply |
| 핀 48 | VSS — Ground |
| 핀 49 | RD0 — Digital I/O port D bit 0 |
| 핀 50 | RD1 — Digital I/O port D bit 1 |
| 핀 51 | RD2 — Digital I/O port D bit 2 |
| 핀 52 | RD3 — Digital I/O port D bit 3 |
| 핀 53 | RD4 — Digital I/O port D bit 4 |
| 핀 54 | RD5 — Digital I/O port D bit 5 |
| 핀 55 | RD6 — Digital I/O port D bit 6 |
| 핀 56 | RD7 — Digital I/O port D bit 7 |
| 핀 57 | RD8 — Digital I/O port D bit 8 |
| 핀 58 | RD9 — Digital I/O port D bit 9 |
| 핀 59 | RD10 — Digital I/O port D bit 10 |
| 핀 60 | RD11 — Digital I/O port D bit 11 |
| 핀 61 | RD12 — Digital I/O port D bit 12 |
| 핀 62 | RD13 — Digital I/O port D bit 13 |
| 핀 63 | RD14 — Digital I/O port D bit 14 |
| 핀 64 | RD15 — Digital I/O port D bit 15 |
| 핀 65 | VDD — Power supply |
| 핀 66 | VSS — Ground |
| 핀 67 | RC0 — Digital I/O port C bit 0 |
| 핀 68 | RC1 — Digital I/O port C bit 1 |
| 핀 69 | RC2 — Digital I/O port C bit 2 |
| 핀 70 | RC3 — Digital I/O port C bit 3 |
| 핀 71 | RC4 — Digital I/O port C bit 4 |
| 핀 72 | RC5 — Digital I/O port C bit 5 |
| 핀 73 | RC6 — Digital I/O port C bit 6 |
| 핀 74 | RC7 — Digital I/O port C bit 7 |
| 핀 75 | RC8 — Digital I/O port C bit 8 |
| 핀 76 | RC9 — Digital I/O port C bit 9 |
| 핀 77 | VDD — Power supply |
| 핀 78 | VSS — Ground |
| 핀 79 | RB0 — Digital I/O port B bit 0 |
| 핀 80 | RB1 — Digital I/O port B bit 1 |
| 핀 81 | RB2 — Digital I/O port B bit 2 |
| 핀 82 | RB3 — Digital I/O port B bit 3 |
| 핀 83 | RB4 — Digital I/O port B bit 4 |
| 핀 84 | RB5 — Digital I/O port B bit 5 |
| 핀 85 | RB6 — Digital I/O port B bit 6 |
| 핀 86 | RB7 — Digital I/O port B bit 7 |
| 핀 87 | RB8 — Digital I/O port B bit 8 |
| 핀 88 | RB9 — Digital I/O port B bit 9 |
| 핀 89 | RB10 — Digital I/O port B bit 10 |
| 핀 90 | RB11 — Digital I/O port B bit 11 |
| 핀 91 | RB12 — Digital I/O port B bit 12 |
| 핀 92 | RB13 — Digital I/O port B bit 13 |
| 핀 93 | RB14 — Digital I/O port B bit 14 |
| 핀 94 | RB15 — Digital I/O port B bit 15 |
| 핀 95 | VDD — Power supply |
| 핀 96 | VSS — Ground |
| 핀 97 | RA0 — Digital I/O port A bit 0 |
| 핀 98 | RA1 — Digital I/O port A bit 1 |
| 핀 99 | RA2 — Digital I/O port A bit 2 |
| 핀 100 | RA3 — Digital I/O port A bit 3 |
| 핀 101 | RA4 — Digital I/O port A bit 4 |
| 핀 102 | RA5 — Digital I/O port A bit 5 |
| 핀 103 | RA6 — Digital I/O port A bit 6 |
| 핀 104 | RA7 — Digital I/O port A bit 7 |
| 핀 105 | RA8 — Digital I/O port A bit 8 |
| 핀 106 | RA9 — Digital I/O port A bit 9 |
| 핀 107 | RA10 — Digital I/O port A bit 10 |
| 핀 108 | RA11 — Digital I/O port A bit 11 |
| 핀 109 | RA12 — Digital I/O port A bit 12 |
| 핀 110 | RA13 — Digital I/O port A bit 13 |
| 핀 111 | RA14 — Digital I/O port A bit 14 |
| 핀 112 | RA15 — Digital I/O port A bit 15 |
| 핀 113 | VDD — Power supply |
| 핀 114 | VSS — Ground |
| 핀 115 | MCLR — Master clear reset (active low) |
| 핀 116 | VDD — Power supply |
| 핀 117 | VSS — Ground |
| 핀 118 | PGEC1 — ICSP clock pin 1 |
| 핀 119 | PGED1 — ICSP data pin 1 |
| 핀 120 | PGEC2 — ICSP clock pin 2 |
| 핀 121 | PGED2 — ICSP data pin 2 |
| 핀 122 | PGEC3 — ICSP clock pin 3 |
| 핀 123 | PGED3 — ICSP data pin 3 |
| 핀 124 | VDD — Power supply |
| 핀 125 | VSS — Ground |
| 핀 126 | AVDD — Analog power supply |
| 핀 127 | AVSS — Analog ground |
| 핀 128 | VREF+ — ADC positive reference |
| 핀 129 | VREF- — ADC negative reference |
| 핀 130 | AN0 — Analog input channel 0 |
| 핀 131 | AN1 — Analog input channel 1 |
| 핀 132 | AN2 — Analog input channel 2 |
| 핀 133 | AN3 — Analog input channel 3 |
| 핀 134 | AN4 — Analog input channel 4 |
| 핀 135 | AN5 — Analog input channel 5 |
| 핀 136 | AN6 — Analog input channel 6 |
| 핀 137 | AN7 — Analog input channel 7 |
| 핀 138 | VDD — Power supply |
| 핀 139 | VSS — Ground |
| 핀 140 | OSC1 — Primary oscillator input |
| 핀 141 | OSC2 — Primary oscillator output |
| 핀 142 | SOSCI — Secondary oscillator input |
| 핀 143 | SOSCO — Secondary oscillator output |
| 핀 144 | VDD — Power supply |
일반적인 애플리케이션
PIC32MZ1024EFM144-E/PH 적합 용도: 6 애플리케이션s: Industrial Automation Controller, IoT Gateway with Secure Connectivity, HMI and Graphics Panel, Motor Control Drive, Secure Connected Medical Device, Automotive Body Control Module.
Industrial Automation Controller
The PIC32MZ1024EFM144-E/PH fits industrial automation controllers because its 200 MHz MIPS32 M-Class core delivers 330 DMIPS for deterministic control loops, while 1 MB dual-panel Flash and 512 KB SRAM hold ladder-logic interpreters and motion profiles without external memory. CAN 2.0B and 10/100 Ethernet MAC provide fieldbus and plant-network connectivity on the same die. The -40C to +125C extended temperature rating and AEC-Q100 qualification reported by distributors allow deployment in cabinets and near drives. In a typical design the MCU runs a real-time kernel, services CANopen or Modbus TCP stacks, and drives PWM outputs for motor control; the hardware crypto engine can authenticate firmware updates over Ethernet. The trade-off is power: at 200 MHz the core draws substantially more than a Cortex-M4 class device, so thermal design of the 144-pin TQFP must be validated.
추천
IoT Gateway with Secure Connectivity
The PIC32MZ1024EFM144-E/PH suits IoT gateways because it integrates a 10/100 Ethernet MAC, USB 2.0 High-Speed with on-chip PHY, and a hardware crypto engine with random number generator in one 144-pin TQFP. The crypto module accelerates AES, SHA, and RSA operations used in TLS sessions, offloading the 200 MHz core so application tasks keep running. 1 MB Flash stores a TCP/IP stack, TLS certificates, and application code, while 512 KB SRAM buffers packet queues. In a gateway design the MCU bridges Ethernet to CAN or UART sensor buses and terminates secure MQTT or HTTPS sessions. The dual-panel Flash supports live firmware updates without downtime. The main consideration is that the on-chip PHY requires careful USB layout and impedance control to meet signal-integrity requirements.
추천
HMI and Graphics Panel
The PIC32MZ1024EFM144-E/PH supports HMI and graphics panels because its 200 MHz core with IEEE 754 FPU and DSP extensions can render 2D graphics and run touch-controller algorithms in software, while 512 KB SRAM provides frame buffering for moderate-resolution displays. The 144-pin TQFP exposes enough I/O for parallel display interfaces, SPI touch controllers, and external memory buses. In a typical HMI design the MCU drives a TFT panel through the parallel master port, reads a capacitive touch controller over I2C, and communicates with the host PLC over Ethernet or CAN. The FPU accelerates coordinate transforms and animation math. The trade-off versus a dedicated graphics MCU such as the PIC32MZ DA is that complex 3D or high-resolution rendering may exceed the available SRAM and require external SDRAM.
추천
Motor Control Drive
The PIC32MZ1024EFM144-E/PH is used in motor control drives because its DSP-enhanced MIPS32 core with four 64-bit accumulators and single-cycle MAC executes field-oriented control loops at 200 MHz, while the 12-bit ADC samples phase currents and the PWM peripherals generate complementary outputs with dead-time insertion. 1 MB Flash holds motor parameter tables and control firmware, and 512 KB SRAM buffers ADC results and observer state variables. In a three-phase inverter design the MCU runs Clarke/Park transforms, PI current regulators, and space-vector PWM at tens of kHz. CAN 2.0B links the drive to a motion controller. The design consideration is ADC timing: sample-and-hold must be synchronized to PWM edges to avoid switching noise, and the 144-pin package's analog pins should be placed away from power-stage traces.
추천
Secure Connected Medical Device
The PIC32MZ1024EFM144-E/PH fits secure connected medical devices because the hardware crypto engine with RNG supports encrypted patient-data transport and authenticated firmware, while the 200 MHz core and FPU handle signal-processing algorithms for physiological monitoring. 1 MB Flash stores application code and cryptographic keys in protected memory, and 512 KB SRAM buffers sampled waveforms. USB 2.0 High-Speed enables connection to a host PC or docking station, and Ethernet supports hospital network integration. In a patient monitor the MCU acquires ECG or SpO2 data through the 12-bit ADC, filters it in real time, and transmits it over TLS. The design consideration is that medical certification requires traceable firmware and secure key storage; the on-chip crypto engine simplifies this but does not replace a certified secure element for the highest assurance levels.
추천
Automotive Body Control Module
The PIC32MZ1024EFM144-E/PH is applicable to automotive body control modules because distributor listings report AEC-Q100 qualification and the device is rated -40C to +125C, covering cabin and under-hood temperature extremes. CAN 2.0B connects to the vehicle bus, and the 144-pin TQFP provides enough I/O for relay drivers, switch inputs, and LIN transceivers. 1 MB Flash holds diagnostic routines and configuration data, while the crypto engine supports secure vehicle-network authentication. In a body control module the MCU manages lighting, window, and lock actuators, reports fault codes over CAN, and receives over-the-air update commands. The design consideration is that automotive qualification must be confirmed against the specific ordering variant; the -E/PH extended-temperature suffix is required, and the standard -I/PH industrial variant is not a substitute for automotive use.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC32MZ1024EFM144-E/PH — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC32MZ1024EFH144-E/PH | PIC32MZ1024EFK144-E/PH | PIC32MZ1024EFE144-E/PH | PIC32MZ1024EFG144-E/PL |
|---|---|---|---|---|---|
| Package | 144-pin TQFP (16x16) | 144-pin TQFP (16x16) - same | 144-pin TQFP (16x16) - same | 144-pin TQFP (16x16) - same | 144-pin TQFP (16x16) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core Frequency | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| Flash Memory | 1 MB | 1 MB | 1 MB | 1 MB | 1 MB |
| SRAM | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB |
| Hardware Crypto Engine | Yes (with RNG) | No | No | No | No |
| USB | USB 2.0 High-Speed with PHY | USB 2.0 High-Speed with PHY | USB 2.0 High-Speed with PHY | USB 2.0 Full-Speed | USB 2.0 Full-Speed |
| Ethernet MAC | 10/100 Ethernet MAC | 10/100 Ethernet MAC | 10/100 Ethernet MAC | 10/100 Ethernet MAC | 10/100 Ethernet MAC |
| Temperature Range | -40C to +125C | -40C to +125C | -40C to +125C | -40C to +125C | -40C to +125C |
주요 차별점
- Hardware crypto engine with RNG (vs PIC32MZ1024EFH144-E/PH)
- Full 144-pin I/O fan-out (vs PIC32MZ1024EFM124-E/TL)
- Extended temperature and automotive qualification (vs PIC32MZ1024EFE144-E/PH)
설계 노트
Decouple every VDD/VSS pin pair with a 0.1 uF ceramic capacitor placed within 2 mm of the pin, and add a bulk 10 uF capacitor per power domain. The PIC32MZ1024EFM144-E/PH has multiple VDD/VSS pairs across the 144-pin TQFP; omitting decoupling on any pair can cause intermittent core faults at 200 MHz. Keep the analog supply (AVDD/AVSS) filtered separately with a ferrite bead and its own 0.1 uF plus 1 uF capacitors to protect the 12-bit ADC from digital switching noise.
Route the 144-pin TQFP with a solid ground plane directly beneath the device and use thermal vias under the exposed pad if present. Keep the crystal on OSC1/OSC2 as close as possible to the pins with short, matched traces and guard them with ground. For USB High-Speed, route D+/D- as a 90 ohm differential pair with controlled impedance and no stubs; the on-chip PHY still requires careful layout to pass eye-diagram testing.
The PIC32MZ1024EFM144-E/PH has more than one PGECx/PGEDx pin pair for ICSP. Any pair may be used, but the clock and data pins must be used as a matched pair (for example PGEC2 with PGED2); mixing pairs prevents programming. Also verify the core clock configuration: distributor listings show 180 MHz while the family datasheet states up to 200 MHz for this device, so confirm the PLL settings against the current Microchip datasheet before finalizing timing.
규정 준수 정보
RoHS compliance and AEC-Q100 automotive qualification are reported by distributor listings (datasheets.com, SnapEDA). REACH, lead-free, halogen-free, and conflict-minerals status were not stated in the provided data and are marked unknown.