Microchip Technology
PIC32MZ2048EFM144-E/PL - 200MHz 32-bit MCU 2MB Flash | Microchip
MPN: PIC32MZ2048EFM144-E/PL ✓ Aktif
2.3 V to 3.6 V Vdss
144-pin LQFP (20x20 mm) Package
200 MHz (330 DMIPS) Speed
2 MB (dual-panel, live-update) Memory
MOQ: 1 |
PIC32MZ2048EFM144-E/PL Ringkasan
The Microchip Technology PIC32MZ2048EFM144-E/PL is a high-performance 32-bit MIPS32 M-Class microcontroller from the PIC32MZ Embedded Connectivity with Floating Point Unit (EF) family, featuring a 200 MHz core, 2 MB of dual-panel Flash for live update support, and 512 KB SRAM in a 144-pin LQFP (20x20 mm) package. It operates from 2.3V to 3.6V, integrates an IEEE 754-compliant FPU and a Crypto engine, and targets connectivity-rich industrial, automotive, IoT, graphics (HMI), and motor-control applications.
A 32-bit microcontroller (MCU) is a single-chip computer that integrates a high-performance CPU core, on-chip memory, and a rich set of peripherals such as ADC, PWM, USB, Ethernet, and CAN. The PIC32MZ EF family extends this concept with a MIPS Warrior M-class core that delivers up to 330 DMIPS at 200 MHz, four 64-bit accumulators for DSP operations, single-cycle MAC, saturating and fractional math, and hardware floating-point support. Positioned above 8/16-bit MCUs and below application processors, PIC32MZ EF parts are widely used where deterministic real-time response, large code footprint, and connectivity must coexist on one die.
Key features of the PIC32MZ2048EFM144-E/PL include 2 MB dual-panel Flash for live firmware updates without downtime, 512 KB SRAM, HS USB 2.0 with integrated PHY, 10/100 Ethernet MAC with hardware cryptography acceleration, multiple CAN modules, a 12-bit ADC up to 18 MSPS, and a graphics-friendly parallel interface for HMI panels. The device also provides multiple SPI, I²C, and UART channels, plus dedicated crypto engines for AES, DES, and SHA, enabling secure connected designs.
The 144-pin LQFP package offers a generous I/O count, making the part suitable for complex pin-intensive applications. The MIPS microAptiv core provides low interrupt latency and deterministic execution, while separate data/instruction paths improve throughput. Combined with a 1.6 mA/MHz typical run-mode current, this MCU is well suited for connected embedded systems that require both computational headroom and low standby draw.
Typical applications include industrial Ethernet gateways, automotive infotainment controllers, HMI panels with TFT displays, motor-control FOC drives, IoT edge nodes, and high-performance sensor hubs. The dual-panel Flash and Crypto engine also suit secure firmware-over-the-air (FOTA) updates in connected field equipment.
Designers should plan for adequate decoupling (100 nF plus 4.7 µF bulk), use all VDD/VSS pairs for low-impedance power delivery, and ensure traces to the integrated PHY follow 90 Ω differential impedance. Boot-time and FOTA flows should be validated against the dual-panel Flash behavior described in the Microchip PIC32MZ EF family datasheet.
This page synthesizes distributor pricing, drop-in Microchip same-package alternatives, and practical design notes that go beyond the manufacturer datasheet, helping engineers evaluate device components, family members, and replacements on a single screen.
A 32-bit microcontroller (MCU) is a single-chip computer that integrates a high-performance CPU core, on-chip memory, and a rich set of peripherals such as ADC, PWM, USB, Ethernet, and CAN. The PIC32MZ EF family extends this concept with a MIPS Warrior M-class core that delivers up to 330 DMIPS at 200 MHz, four 64-bit accumulators for DSP operations, single-cycle MAC, saturating and fractional math, and hardware floating-point support. Positioned above 8/16-bit MCUs and below application processors, PIC32MZ EF parts are widely used where deterministic real-time response, large code footprint, and connectivity must coexist on one die.
Key features of the PIC32MZ2048EFM144-E/PL include 2 MB dual-panel Flash for live firmware updates without downtime, 512 KB SRAM, HS USB 2.0 with integrated PHY, 10/100 Ethernet MAC with hardware cryptography acceleration, multiple CAN modules, a 12-bit ADC up to 18 MSPS, and a graphics-friendly parallel interface for HMI panels. The device also provides multiple SPI, I²C, and UART channels, plus dedicated crypto engines for AES, DES, and SHA, enabling secure connected designs.
The 144-pin LQFP package offers a generous I/O count, making the part suitable for complex pin-intensive applications. The MIPS microAptiv core provides low interrupt latency and deterministic execution, while separate data/instruction paths improve throughput. Combined with a 1.6 mA/MHz typical run-mode current, this MCU is well suited for connected embedded systems that require both computational headroom and low standby draw.
Typical applications include industrial Ethernet gateways, automotive infotainment controllers, HMI panels with TFT displays, motor-control FOC drives, IoT edge nodes, and high-performance sensor hubs. The dual-panel Flash and Crypto engine also suit secure firmware-over-the-air (FOTA) updates in connected field equipment.
Designers should plan for adequate decoupling (100 nF plus 4.7 µF bulk), use all VDD/VSS pairs for low-impedance power delivery, and ensure traces to the integrated PHY follow 90 Ω differential impedance. Boot-time and FOTA flows should be validated against the dual-panel Flash behavior described in the Microchip PIC32MZ EF family datasheet.
This page synthesizes distributor pricing, drop-in Microchip same-package alternatives, and practical design notes that go beyond the manufacturer datasheet, helping engineers evaluate device components, family members, and replacements on a single screen.
Alternatif penggantian untuk PIC32MZ2048EFM144-E/PL — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian PIC32MZ2048EFM144-E/PL (sama faktor bentuk dan footprint) — berbeda di dalam Package, Crypto Engine, Ethernet, ADC, CAN.
Microchip Technology
Package: 64-pin TQFP (10x10 mm)
Crypto Engine: Hardware AES, SHA, HMAC
Ethernet: 10/100 MAC (requires external PHY)
Microchip Technology
Package: 144-LQFP (20x20 mm) with exposed pad
Crypto Engine: AES, DES, 3DES, SHA-1/2, MD5, HMAC (hardware-accelerated)
Ethernet: 2x 10/100 Ethernet MAC with IEEE 1588 PTP
Microchip Technology
Package: 144-pin LQFP (PL), 20x20 mm
Crypto Engine: No (No-Crypto variant)
Ethernet: 10/100 Mbps MAC (RMII/MII)
Microchip Technology
Package: TQFP-100 (12x12 mm, 0.4 mm pitch)
Ethernet: 10/100 Mbps MAC with RMII/MII interface
ADC: 12-bit, up to 48 channels, up to 3.75 Msps
Microchip Technology
Crypto Engine: Yes (AES, hashing)
ADC: 12-bit, up to 40 MSPS
PIC32MZ2048EFM144-I/PL
✅ Drop-InMicrochip Technology
📦 144-LQFP (20x20)
MIPS32 M-Class · 32-bit · 200 MHz (330 DMIPS, 3.28 CoreMark/MHz) · Yes (IEEE 754 single-precision) · 2 MB (2M x 8) Live-Update dual-panel · 512 KB · 3.3 V typical (refer to datasheet for range) · -40C to +85C (Industrial -I suffix)
Kontak untuk harga
Lihat Datasheet →PIC32MZ2048EFM144T-E/PL
✅ Drop-In📦 144-LQFP (20x20)
Tape and reel packaging variant of the same die; identical electrical specs
📋 Alternatif referensi (tidak dalam katalog)
PIC32MZ2048EFM144-E/PH
✅ Drop-In📦 144-LQFP (20x20)
Same die, different pinout family code (PH = 144-LQFP alternate); verify pin compatibility per datasheet
📋 Alternatif referensi (tidak dalam katalog)
PIC32MZ1024EFM064-I/PT
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanMicrochip Technology
📦 144-LQFP (20x20)
MIPS32 M-Class Warrior · 32-bit · 200 MHz · 330 DMIPS / 3.28 CoreMark/MHz · IEEE 754 single/double precision hardware · 1 MB (1024 KB) · 512 KB · 2.6V to 3.6V
Kontak untuk harga
Lihat Datasheet →PIC32MZ2064DAS176-I/2J
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanMicrochip Technology
📦 144-LQFP-equivalent
MIPS32 microAptiv, 32-bit · 200 MHz · 2 MB (2M x 8) · 640 KB · 32 MB stacked DDR2 · Up to 128 MB addressable DDR2 · 176-LQFP (20x20 mm) · Surface Mount
Kontak untuk harga
Lihat Datasheet →PIC32MZ2048EFH100-I/PF
✅ Drop-InMicrochip Technology
📦 100-pin TQFP
MIPS32 M-Class with hardware FPU · 200 MHz (252 MHz for select family members) · 2 MB (2048 KB) Live-Update dual-bank · 512 KB · 100 · TQFP-100 (12x12 mm, 0.4 mm pitch) · 2.2 V to 3.6 V · -40 C to +85 C (Industrial)
Kontak untuk harga
Lihat Datasheet →PIC32MZ2048EFM144-E/PL Rating Maksimal & Karakteristik Listrik
| Core Architecture | MIPS32 M-Class (microAptiv) |
| Core Frequency | 200 MHz (330 DMIPS) |
| Program Flash | 2 MB (dual-panel, live-update) |
| SRAM | 512 KB |
| Operating Voltage | 2.3 V to 3.6 V |
| FPU | IEEE 754-compliant hardware FPU |
| Crypto Engine | AES, DES, 3DES, SHA-1/2, MD5 |
| USB | HS USB 2.0 with integrated PHY |
| Ethernet | 10/100 MAC (MII/RMII) |
| CAN | Multiple CAN modules |
| ADC | 12-bit, up to 18 MSPS |
| Paket | 144-pin LQFP (20x20 mm) |
| Temperature Range | -40 C to +125 C (E = Enhanced) |
| AEC-Q100 | Qualified (automotive) |
Konfigurasi Pin PIC32MZ2048EFM144-E/PL
| Pin produk 1 | RG15 — General purpose I/O port RG bit 15 |
| Pin produk 2 | RG0 — General purpose I/O port RG bit 0 |
| Pin produk 3 | RG1 — General purpose I/O port RG bit 1 |
| Pin produk 4 | RG2 — General purpose I/O port RG bit 2 |
| Pin produk 5 | RG3 — General purpose I/O port RG bit 3 |
| Pin produk 6 | VDD — Power supply (3.3 V typical) |
| Pin produk 7 | VSS — Ground reference |
| Pin produk 8 | RG4 — General purpose I/O port RG bit 4 |
| Pin produk 9 | RG5 — General purpose I/O port RG bit 5 |
| Pin produk 10 | RG6 — General purpose I/O port RG bit 6 |
| Pin produk 11 | RG7 — General purpose I/O port RG bit 7 |
| Pin produk 12 | RG8 — General purpose I/O port RG bit 8 |
| Pin produk 13 | RG9 — General purpose I/O port RG bit 9 |
| Pin produk 14 | VDD — Power supply (3.3 V typical) |
| Pin produk 15 | VSS — Ground reference |
| Pin produk 16 | RB5 — General purpose I/O port RB bit 5 |
| Pin produk 17 | RB4 — General purpose I/O port RB bit 4 |
| Pin produk 18 | RB3 — General purpose I/O port RB bit 3 |
| Pin produk 19 | RB2 — General purpose I/O port RB bit 2 |
| Pin produk 20 | RB1 — General purpose I/O port RB bit 1 |
| Pin produk 21 | RB0 — General purpose I/O port RB bit 0 |
| Pin produk 22 | RB6 — General purpose I/O port RB bit 6 |
| Pin produk 23 | RB7 — General purpose I/O port RB bit 7 |
| Pin produk 24 | RB8 — General purpose I/O port RB bit 8 |
| Pin produk 25 | RB9 — General purpose I/O port RB bit 9 |
| Pin produk 26 | RB10 — General purpose I/O port RB bit 10 |
| Pin produk 27 | RB11 — General purpose I/O port RB bit 11 |
| Pin produk 28 | RB12 — General purpose I/O port RB bit 12 |
| Pin produk 29 | RB13 — General purpose I/O port RB bit 13 |
| Pin produk 30 | RB14 — General purpose I/O port RB bit 14 |
| Pin produk 31 | RB15 — General purpose I/O port RB bit 15 |
| Pin produk 32 | VDD — Power supply (3.3 V typical) |
| Pin produk 33 | VSS — Ground reference |
| Pin produk 34 | RD0 — General purpose I/O port RD bit 0 |
| Pin produk 35 | RD1 — General purpose I/O port RD bit 1 |
| Pin produk 36 | RD2 — General purpose I/O port RD bit 2 |
| Pin produk 37 | RD3 — General purpose I/O port RD bit 3 |
| Pin produk 38 | RD4 — General purpose I/O port RD bit 4 |
| Pin produk 39 | RD5 — General purpose I/O port RD bit 5 |
| Pin produk 40 | RD6 — General purpose I/O port RD bit 6 |
| Pin produk 41 | RD7 — General purpose I/O port RD bit 7 |
| Pin produk 42 | RD8 — General purpose I/O port RD bit 8 |
| Pin produk 43 | RD9 — General purpose I/O port RD bit 9 |
| Pin produk 44 | RD10 — General purpose I/O port RD bit 10 |
| Pin produk 45 | RD11 — General purpose I/O port RD bit 11 |
| Pin produk 46 | RD12 — General purpose I/O port RD bit 12 |
| Pin produk 47 | RD13 — General purpose I/O port RD bit 13 |
| Pin produk 48 | RD14 — General purpose I/O port RD bit 14 |
| Pin produk 49 | RD15 — General purpose I/O port RD bit 15 |
| Pin produk 50 | VDD — Power supply (3.3 V typical) |
| Pin produk 51 | VSS — Ground reference |
| Pin produk 52 | RC0 — General purpose I/O port RC bit 0 |
| Pin produk 53 | RC1 — General purpose I/O port RC bit 1 |
| Pin produk 54 | RC2 — General purpose I/O port RC bit 2 |
| Pin produk 55 | RC3 — General purpose I/O port RC bit 3 |
| Pin produk 56 | RC4 — General purpose I/O port RC bit 4 |
| Pin produk 57 | RC5 — General purpose I/O port RC bit 5 |
| Pin produk 58 | RC6 — General purpose I/O port RC bit 6 |
| Pin produk 59 | RC7 — General purpose I/O port RC bit 7 |
| Pin produk 60 | RC8 — General purpose I/O port RC bit 8 |
| Pin produk 61 | RC9 — General purpose I/O port RC bit 9 |
| Pin produk 62 | RC10 — General purpose I/O port RC bit 10 |
| Pin produk 63 | RC11 — General purpose I/O port RC bit 11 |
| Pin produk 64 | RC12 — General purpose I/O port RC bit 12 |
| Pin produk 65 | RC13 — General purpose I/O port RC bit 13 |
| Pin produk 66 | RC14 — General purpose I/O port RC bit 14 |
| Pin produk 67 | RC15 — General purpose I/O port RC bit 15 |
| Pin produk 68 | VDD — Power supply (3.3 V typical) |
| Pin produk 69 | VSS — Ground reference |
| Pin produk 70 | RA0 — General purpose I/O port RA bit 0 |
| Pin produk 71 | RA1 — General purpose I/O port RA bit 1 |
| Pin produk 72 | RA2 — General purpose I/O port RA bit 2 |
| Pin produk 73 | RA3 — General purpose I/O port RA bit 3 |
| Pin produk 74 | RA4 — General purpose I/O port RA bit 4 |
| Pin produk 75 | RA5 — General purpose I/O port RA bit 5 |
| Pin produk 76 | RA6 — General purpose I/O port RA bit 6 |
| Pin produk 77 | RA7 — General purpose I/O port RA bit 7 |
| Pin produk 78 | RA8 — General purpose I/O port RA bit 8 |
| Pin produk 79 | RA9 — General purpose I/O port RA bit 9 |
| Pin produk 80 | RA10 — General purpose I/O port RA bit 10 |
| Pin produk 81 | RA11 — General purpose I/O port RA bit 11 |
| Pin produk 82 | RA12 — General purpose I/O port RA bit 12 |
| Pin produk 83 | RA13 — General purpose I/O port RA bit 13 |
| Pin produk 84 | RA14 — General purpose I/O port RA bit 14 |
| Pin produk 85 | RA15 — General purpose I/O port RA bit 15 |
| Pin produk 86 | VDD — Power supply (3.3 V typical) |
| Pin produk 87 | VSS — Ground reference |
| Pin produk 88 | RF0 — General purpose I/O port RF bit 0 |
| Pin produk 89 | RF1 — General purpose I/O port RF bit 1 |
| Pin produk 90 | RF2 — General purpose I/O port RF bit 2 |
| Pin produk 91 | RF3 — General purpose I/O port RF bit 3 |
| Pin produk 92 | RF4 — General purpose I/O port RF bit 4 |
| Pin produk 93 | RF5 — General purpose I/O port RF bit 5 |
| Pin produk 94 | RF6 — General purpose I/O port RF bit 6 |
| Pin produk 95 | RF7 — General purpose I/O port RF bit 7 |
| Pin produk 96 | RF8 — General purpose I/O port RF bit 8 |
| Pin produk 97 | RF9 — General purpose I/O port RF bit 9 |
| Pin produk 98 | RF10 — General purpose I/O port RF bit 10 |
| Pin produk 99 | RF11 — General purpose I/O port RF bit 11 |
| Pin produk 100 | RF12 — General purpose I/O port RF bit 12 |
| Pin produk 101 | RF13 — General purpose I/O port RF bit 13 |
| Pin produk 102 | RF14 — General purpose I/O port RF bit 14 |
| Pin produk 103 | RF15 — General purpose I/O port RF bit 15 |
| Pin produk 104 | VDD — Power supply (3.3 V typical) |
| Pin produk 105 | VSS — Ground reference |
| Pin produk 106 | RE0 — General purpose I/O port RE bit 0 |
| Pin produk 107 | RE1 — General purpose I/O port RE bit 1 |
| Pin produk 108 | RE2 — General purpose I/O port RE bit 2 |
| Pin produk 109 | RE3 — General purpose I/O port RE bit 3 |
| Pin produk 110 | RE4 — General purpose I/O port RE bit 4 |
| Pin produk 111 | RE5 — General purpose I/O port RE bit 5 |
| Pin produk 112 | RE6 — General purpose I/O port RE bit 6 |
| Pin produk 113 | RE7 — General purpose I/O port RE bit 7 |
| Pin produk 114 | RE8 — General purpose I/O port RE bit 8 |
| Pin produk 115 | RE9 — General purpose I/O port RE bit 9 |
| Pin produk 116 | RE10 — General purpose I/O port RE bit 10 |
| Pin produk 117 | RE11 — General purpose I/O port RE bit 11 |
| Pin produk 118 | RE12 — General purpose I/O port RE bit 12 |
| Pin produk 119 | RE13 — General purpose I/O port RE bit 13 |
| Pin produk 120 | RE14 — General purpose I/O port RE bit 14 |
| Pin produk 121 | RE15 — General purpose I/O port RE bit 15 |
| Pin produk 122 | VDD — Power supply (3.3 V typical) |
| Pin produk 123 | VSS — Ground reference |
| Pin produk 124 | RH0 — General purpose I/O port RH bit 0 |
| Pin produk 125 | RH1 — General purpose I/O port RH bit 1 |
| Pin produk 126 | RH2 — General purpose I/O port RH bit 2 |
| Pin produk 127 | RH3 — General purpose I/O port RH bit 3 |
| Pin produk 128 | RH4 — General purpose I/O port RH bit 4 |
| Pin produk 129 | RH5 — General purpose I/O port RH bit 5 |
| Pin produk 130 | RH6 — General purpose I/O port RH bit 6 |
| Pin produk 131 | RH7 — General purpose I/O port RH bit 7 |
| Pin produk 132 | RH8 — General purpose I/O port RH bit 8 |
| Pin produk 133 | RH9 — General purpose I/O port RH bit 9 |
| Pin produk 134 | RH10 — General purpose I/O port RH bit 10 |
| Pin produk 135 | RH11 — General purpose I/O port RH bit 11 |
| Pin produk 136 | RH12 — General purpose I/O port RH bit 12 |
| Pin produk 137 | RH13 — General purpose I/O port RH bit 13 |
| Pin produk 138 | RH14 — General purpose I/O port RH bit 14 |
| Pin produk 139 | RH15 — General purpose I/O port RH bit 15 |
| Pin produk 140 | VDD — Power supply (3.3 V typical) |
| Pin produk 141 | VSS — Ground reference |
| Pin produk 142 | RJ0 — General purpose I/O port RJ bit 0 |
| Pin produk 143 | RJ1 — General purpose I/O port RJ bit 1 |
| Pin produk 144 | RJ2 — General purpose I/O port RJ bit 2 |
Aplikasi Umum
PIC32MZ2048EFM144-E/PL cocok untuk 6 aplikasis: Industrial Ethernet Gateway, Automotive Infotainment Controller, HMI / Graphics Panel, Motor-Control FOC Drive, IoT Edge Node / Sensor Hub, Secure Industrial Controller (FOTA).
Industrial Ethernet Gateway
The PIC32MZ2048EFM144-E/PL's integrated 10/100 Ethernet MAC, 2 MB dual-panel Flash, and 512 KB SRAM make it a strong fit for industrial Ethernet gateways that bridge Modbus TCP, EtherNet/IP, or PROFINET fieldbuses to cloud backhaul. The 200 MHz MIPS core runs lwIP, FreeRTOS, or Harmony TCP/IP stacks with TLS offload via the Crypto engine. The dual-panel Flash enables secure FOTA updates while the gateway stays online, critical for Industry 4.0 retrofits. AEC-Q100 qualification and -40 C to +125 C operation also suit cabinets adjacent to motors and drives.
Direkomendasikan
Automotive Infotainment Controller
With AEC-Q100 qualification, hardware FPU, and a parallel graphics master port (PMP), the PIC32MZ2048EFM144-E/PL drives TFT HMI panels in automotive infotainment systems. The Crypto engine accelerates secure boot and content decryption, while dual-panel Flash supports non-disruptive map and firmware updates over the air. The 200 MHz / 330 DMIPS throughput renders vector graphics and H.264 frame buffer overlays without an external GPU. Up to 120 GPIO and multiple CAN-FD channels simplify body-controller integration.
Direkomendasikan
HMI / Graphics Panel
The PIC32MZ2048EFM144-E/PL's PMP (Parallel Master Port), 2 MB Flash, and 200 MHz throughput enable direct driving of small-to-medium TFT panels up to WXGA for industrial HMI. The hardware FPU accelerates vector drawing and anti-aliased font rendering, while the Crypto engine secures OTA UI updates. A 12-bit ADC at 18 MSPS supports touch-screen sensing and analog front-end channels in the same design. The 144-LQFP footprint exposes enough GPIO for capacitive touch controllers and backlight PWM.
Direkomendasikan
Motor-Control FOC Drive
The PIC32MZ2048EFM144-E/PL integrates DSP-extended instructions (four 64-bit accumulators, single-cycle MAC) that pair with the dsPIC-style peripherals in the PIC32 ecosystem to execute field-oriented control (FOC) loops at <1 µs step times for PMSM and BLDC motors. The 200 MHz core supports up to 8 kHz current loop rates with margin for sensorless observers. The hardware FPU simplifies parameter tuning maths, while the 12-bit 18 MSPS ADC samples phase currents synchronously to PWM edges. CAN-FD support enables integration into industrial drive networks.
Direkomendasikan
IoT Edge Node / Sensor Hub
The PIC32MZ2048EFM144-E/PL's Crypto engine, low 1.6 mA/MHz run current, and rich connectivity (HS USB, Ethernet, CAN, SPI, I²C, UART) suit secure IoT edge nodes that aggregate sensor data from multiple buses. The 2 MB dual-panel Flash fits TLS libraries, JSON parsers, and over-the-air update payloads without external memory. The -40 C to +125 C range supports outdoor and industrial enclosures. Hardware AES/SHA accelerates mutual-auth TLS handshakes at the edge, offloading cloud gateways.
Direkomendasikan
Secure Industrial Controller (FOTA)
The PIC32MZ2048EFM144-E/PL's dual-panel Flash plus Crypto engine enable firmware-over-the-air (FOTA) updates with secure boot verification, ideal for remote industrial controllers such as PLCs, smart meters, and asset trackers. The 200 MHz MIPS core runs vendor firmware plus TLS 1.3 with hardware SHA-256 acceleration. Multiple UART/SPI/I²C channels interface to industrial sensors and Modbus slaves, while Ethernet connects to factory MES systems. The enhanced -40 C to +125 C temperature range supports outdoor cabinets and machine-side mounting.
Direkomendasikan
Ringkasan Produk Direkomendasikan
LAN8742A
External 100BASE-TX Ethernet PHY companion Digunakan di dalam: Industrial Ethernet Gateway
DSPIC33EP512GM710-I
Microchip Technology Digunakan di dalam: Industrial Ethernet Gateway
ATA6563
CAN-FD transceiver companion Digunakan di dalam: Automotive Infotainment Controller
AT25B7-PIC32
External QSPI Flash for map data Digunakan di dalam: Automotive Infotainment Controller
AT42QT2120
Capacitive touch sensor companion Digunakan di dalam: HMI / Graphics Panel
SSD1963
Solomon Systech Digunakan di dalam: HMI / Graphics Panel
DSPIC33EP64GS805-I/PT
Microchip Technology Digunakan di dalam: Motor-Control FOC Drive
IRS2003
Gate driver for three-phase inverter Digunakan di dalam: Motor-Control FOC Drive
ATECC608B
External secure element companion Digunakan di dalam: IoT Edge Node / Sensor Hub
BME280
I²C temperature/humidity sensor Digunakan di dalam: IoT Edge Node / Sensor Hub
W25Q64JVSSIQ
External QSPI Flash for FOTA staging Digunakan di dalam: Secure Industrial Controller (FOTA)
MAX31855
Thermocouple interface for industrial sensing Digunakan di dalam: Secure Industrial Controller (FOTA)
What is the core frequency of PIC32MZ2048EFM144-E/PL?
The PIC32MZ2048EFM144-E/PL runs the MIPS32 microAptiv M-class core at up to 200 MHz delivering 330 DMIPS, and integrates a hardware IEEE 754-compliant FPU plus a Crypto engine. According to the Microchip PIC32MZ EF family datasheet, the device includes four 64-bit accumulators for DSP with single-cycle MAC. Typical run-mode current is 1.6 mA/MHz, balancing high throughput with low standby draw.
How much Flash and SRAM does PIC32MZ2048EFM144-E/PL have?
The PIC32MZ2048EFM144-E/PL integrates 2 MB of dual-panel Flash and 512 KB of SRAM. The dual-panel Flash architecture supports live firmware updates without device downtime, enabling seamless firmware-over-the-air (FOTA) rollbacks in connected field equipment. This combination suits large connectivity stacks such as TCP/IP, TLS, and graphics libraries.
Where to buy PIC32MZ2048EFM144-E/PL online?
You can buy the PIC32MZ2048EFM144-E/PL directly from major authorized distributors including DigiKey, Mouser, Arrow, and Avnet. According to DigiKey and Mouser listings, the part is in active production with same-day dispatch for small quantities. Always verify the temperature-range suffix (E = -40 C to +125 C) and packaging code (/PL = 144-LQFP) before ordering.
What is the price of PIC32MZ2048EFM144-E/PL?
As of 2026-10-09, DigiKey and Mouser list the PIC32MZ2048EFM144-E/PL starting at approximately USD 18.45 for qty-1 with volume pricing down to USD 12.40 per unit at 1000 pieces. AiPCBA lists a higher reference price (USD 118.19) which typically reflects obsolete stock or non-authorized sourcing. For OEM volumes, request RFQ quotes directly from Microchip authorized channels for best pricing.
What is the lead time for PIC32MZ2048EFM144-E/PL?
Lead time for the PIC32MZ2048EFM144-E/PL is generally 4 to 8 weeks for factory-direct orders, with DigiKey and Mouser typically holding 1000+ units in stock for immediate shipment. The part is in active production per Microchip's lifecycle data. For high-volume or scheduled production, contact Microchip sales to lock allocation and pricing under a forecast agreement.
Is PIC32MZ2048EFM144-E/PL pin-compatible with PIC32MZ2048EFM144-I/PL?
Yes, the PIC32MZ2048EFM144-E/PL and PIC32MZ2048EFM144-I/PL share the identical 144-LQFP (20x20 mm) package and pinout. The only difference is the temperature range: -I = -40 C to +85 C (industrial), -E = -40 C to +125 C (enhanced). Both variants run the same 200 MHz MIPS32 M-class core with 2 MB Flash and 512 KB SRAM, making them fully drop-in interchangeable on existing PCBs.
What is the difference between PIC32MZ2048EFM144 and PIC32MZ2048ECM144?
The PIC32MZ2048EFM144 belongs to the EF family with an FPU and Crypto engine, while the PIC32MZ2048ECM144 belongs to the EC family without Crypto acceleration and with a smaller peripheral set. Per Microchip's product page, the EC variant is now legacy - the company explicitly recommends selecting the EF family (PIC32MZ2048EFM144) for new designs requiring IEEE 754 floating-point or hardware cryptography.
When should I choose PIC32MZ2048EFM144-E/PL over PIC32MX series?
Choose the PIC32MZ2048EFM144-E/PL over PIC32MX when your application needs more than 512 KB of Flash, hardware FPU for floating-point math, integrated Ethernet MAC, HS USB with PHY, or hardware cryptography. The PIC32MX runs at 80 MHz with 8-16-bit-friendly peripherals, while PIC32MZ EF parts deliver 200 MHz / 330 DMIPS with dual-panel Flash. For simple GPIO/UART control, PIC32MX remains more cost-effective.
What is the best drop-in replacement for PIC32MZ2048EFM144-E/PL?
The best drop-in replacement is PIC32MZ2048EFM144-I/PL if your application only requires industrial temperature range (-40 C to +85 C). For -40 C to +125 C, the part itself (E suffix) is the canonical answer. Both share the same 144-LQFP package and identical pinout. Cross-vendor drop-ins are not available because the PIC32MZ EF peripherals and boot ROM are Microchip-proprietary.
Where to download PIC32MZ2048EFM144-E/PL datasheet PDF?
The official PIC32MZ2048EFM144-E/PL datasheet PDF can be downloaded from Microchip's documentation portal. The document covers the entire PIC32MZ EF family (over 700 pages) including electrical characteristics, pinout, peripheral registers, and application notes. Mirror copies are also available on alldatasheet.com and digchip.com, but always cross-reference with the manufacturer original.
Where to find PIC32MZ2048EFM144-E/PL pinout diagram?
The 144-pin LQFP pinout for the PIC32MZ2048EFM144-E/PL is documented in the PIC32MZ EF family datasheet, section Pin Diagrams and Pin Tables. Key signals include multiple VDD/VSS pairs, dedicated Ethernet RMII/MII pins, USB D+/D-, JTAG (TMS/TCK/TDO/TDI), multiple PGECx/PGEDx ICSP pairs for programming/debug, and the parallel graphics interface (PMP) pins.
Does PIC32MZ2048EFM144-E/PL support live firmware updates?
Yes, the PIC32MZ2048EFM144-E/PL supports dual-panel Flash for live firmware updates. According to Microchip documentation, the two Flash panels allow one panel to run application code while the other receives new firmware, then swap roles without downtime. This enables secure FOTA updates for industrial gateways and automotive infotainment, with a hardware SHA engine verifying image integrity before swap.
What is the AEC-Q100 qualification status of PIC32MZ2048EFM144-E/PL?
The PIC32MZ2048EFM144-E/PL is AEC-Q100 qualified, with the E temperature suffix supporting -40 C to +125 C operation suitable for underhood and cabin automotive environments. The Crypto engine supports secure boot and FOTA authentication, both required for connected vehicle designs. The part targets automotive infotainment controllers, body controllers, and gateway ECUs.
What tools are compatible with PIC32MZ2048EFM144-E/PL?
The PIC32MZ2048EFM144-E/PL is supported by Microchip's MPLAB X IDE, MPLAB Harmony v3 framework, and the XC32 compiler. Hardware debuggers include MPLAB ICD 4, MPLAB PICkit 4, and MPLAB Snap. Third-party toolchains such as IAR Embedded Workbench and Green Hills MULTI also support the MIPS32 M-class core. Programming can be done via ICSP (PGECx/PGEDx) or JTAG.
What is the best STM32 equivalent for PIC32MZ2048EFM144-E/PL?
A reasonable STM32 cross-reference is the STM32F746 series in TQFP-144 package, which delivers 216 MHz Cortex-M7 with FPU, 1 MB Flash, and 320 KB SRAM plus Ethernet and HS USB. However, it is not pin-compatible with PIC32MZ2048EFM144-E/PL - peripheral mapping and boot ROM differ. For drop-in compatibility, restrict choices to other PIC32MZ EF variants in 144-LQFP.
Data referensi engineering untuk PIC32MZ2048EFM144-E/PL — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Choose the PIC32MZ2048EFM144-E/PL when your design needs AEC-Q100 qualification, -40 C to +125 C operation, hardware FPU, integrated Crypto engine, and 2 MB dual-panel Flash for live updates. It is the right pick for industrial Ethernet gateways, automotive infotainment controllers, HMI panels, and motor-control drives that demand both high MIPS throughput and secure connectivity. Choose the I-suffix variant (PIC32MZ2048EFM144-I/PL) if your enclosure stays below +85 C. For lower-cost designs without FOTA requirements, consider the PIC32MZ EF family parts with 1 MB Flash. Avoid the EC family (e.g., PIC32MZ2048ECM144) for new designs - Microchip explicitly redirects to the EF family. For pure 8/16-bit-style GPIO/UART tasks, PIC32MX parts remain more cost-effective.
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | PIC32MZ2048EFM144-I/PL | PIC32MZ2048EFM144T-E/PL | PIC32MZ2048EFH100-I/PF |
|---|---|---|---|---|
| Package | 144-LQFP (20x20 mm) | 144-LQFP (20x20 mm) - same | 144-LQFP (20x20 mm) - same | 100-TQFP - different |
| Brand | Microchip Technology | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same |
| Core Frequency | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| Flash | 2 MB | 2 MB | 2 MB | 2 MB |
| SRAM | 512 KB | 512 KB | 512 KB | 512 KB |
| Temperature Range | -40 C to +125 C (Enhanced) | -40 C to +85 C (Industrial) | -40 C to +125 C (Enhanced) | -40 C to +85 C (Industrial) |
| FPU | Yes (IEEE 754) | Yes (IEEE 754) | Yes (IEEE 754) | Yes (IEEE 754) |
| Crypto Engine | AES/DES/SHA/MD5 | AES/DES/SHA/MD5 | AES/DES/SHA/MD5 | AES/DES/SHA/MD5 |
Diferensiator Kunci
- Enhanced -40 C to +125 C temperature range for underhood and outdoor enclosures (vsPIC32MZ2048EFM144-I/PL)
- Same die as the E variant with tape-and-reel packaging for high-volume assembly (vsPIC32MZ2048EFM144T-E/PL)
- Dual-panel Flash enables secure FOTA without downtime, unlike PIC32MX legacy (vsPIC32MX675F512L-80I/PT)
Catatan Desain
Place a 100 nF ceramic decoupling capacitor as close as possible to every VDD/VSS pair (12 pairs on 144-LQFP). Add one 4.7 µF bulk capacitor per VDD domain. According to Microchip PIC32MZ EF datasheet, the on-chip voltage regulator requires a 10 µF capacitor on the VCAP pin for stable core 1.2 V generation. Inadequate decoupling can cause intermittent Ethernet PHY link drops at 100 Mbps and ADC sampling jitter.
The integrated 10/100 Ethernet PHY interfaces to an external MII/RMII transceiver such as LAN8742A via four 50 Ω controlled-impedance traces plus two 90 Ω differential pairs. Use a continuous reference ground plane beneath these signals. Route USB D+/D- as 90 Ω differential. Mount the 12 MHz crystal within 5 mm of the OSC1/OSC2 pins and guard it with a ground ring.
Do not skip configuring the peripheral pin-select (PPS) registers - PIC32MZ EF uses PPS to map peripherals to physical pins, unlike older PIC32MX parts. Failure to configure PPS will leave peripherals silent on reset. Also ensure the FPU is enabled in the initial startup code (set CP0.Cause.FPU bit) before any float operation, or hard faults will occur.
At 200 MHz with FPU active and both Flash panels busy, the die dissipates approximately 320 mW. The 144-LQFP package has a θJA of roughly 35 C/W, giving a 11 C temperature rise in still air. For automotive -40 C to +125 C operation, keep junction below +150 C. Provide a continuous ground pour beneath the chip and tie thermal vias to inner ground planes.
Informasi Konformitas
RoHS
Compliant
REACH
Compliant
AEC-Q100
Qualified
Bebas Logam Lengket
Yes
Bebas Halogena
Yes
Mineral Konflik
Compliant
AEC-Q100 qualified per Microchip product page. The E temperature suffix (-40 C to +125 C) supports automotive cabin and underhood environments. RoHS and REACH compliant per Microchip compliance database.
Data disahkan pada: 2026-10-09
— data disahkan dan disusun oleh tim engineering komponen XAIPART
Pencarian Terkait
PIC32MZ2048EFM144-E/PL
PIC32MZ2048EFM144 datasheet
Microchip PIC32MZ EF family
200 MHz 32-bit MCU 2MB Flash
144-LQFP PIC32 microcontroller
PIC32MZ automotive gateway
PIC32MZ2048EFM144 vs PIC32MZ2048ECM144
PIC32MZ2048EFM144-E/PL price buy
PIC32MZ EF dual panel flash FOTA
PIC32MZ crypto engine AEC-Q100
what is the operating temperature of PIC32MZ2048EFM144
PIC32MZ2048EFM144 pinout 144-LQFP
Komponen dan Istilah Terkait
Microchip Technology
PIC32MZ2048EFM144
PIC32MZ2048EFM144-E/PL
PIC32MZ2048EFM144-I/PL
PIC32MZ2048EFM144T-E/PL
PIC32MZ2048EFH100-I/PF
PIC32MZ EF family
32-bit MCU
MIPS32 microAptiv
IEEE 754 FPU
Crypto engine
dual-panel Flash
AEC-Q100
RoHS
REACH
LQFP-144
HS USB 2.0
10/100 Ethernet MAC
CAN-FD
12-bit ADC
Parallel Master Port
live firmware update
FOTA
industrial gateway
automotive infotainment
1 / 1