PIC32MZ2064DAS176-I/2J - 200MHz MCU, 2MB Flash, LQFP-176 | Microchip
MPN: PIC32MZ2064DAS176-I/2J ✓ AktifPIC32MZ2064DAS176-I/2J Ringkasan
A 32-bit microcontroller (MCU) is a single-chip computer that combines a 32-bit processor core, program memory (typically Flash), data memory (SRAM), and a rich set of on-chip peripherals. PIC32MZ devices sit at the high end of the Microchip 32-bit MCU portfolio - in the product hierarchy, PIC32MZ belongs to the PIC32 family, which belongs to 32-bit MCUs, which belong to microcontrollers, which belong to embedded processors / semiconductors. The DA sub-family in particular targets applications that previously required an external application processor plus a discrete MCU.
Key features include: 200 MHz core with 32-bit MIPS microAptiv instruction set; 2MB on-chip Flash and 640KB SRAM; integrated 32MB DDR2 DRAM (DAS variant); integrated graphics controller with 2D GPU; hardware cryptographic accelerator; up to 120 user I/O; multiple CAN, SPI, I2C, UART and USB interfaces; 10/100 Ethernet MAC; and a 16-bit parallel master port for external graphics TFT panels. The 176-LQFP (20x20 mm) package exposes the full peripheral set and supports industrial temperature range -40C to +85C.
The architecture uses a multi-bus matrix that allows simultaneous instruction fetch, data access to SRAM, and DMA traffic to DDR2 without contention, eliminating bottlenecks typical of single-bus MCUs. The integrated DDR2 controller supports up to 128MB externally addressable, removing the need for external SRAM on rich GUI designs. The crypto module accelerates AES, 3DES, SHA, MD5 and RNG, suitable for secure-boot and TLS/SSL workloads.
Typical applications include industrial HMI panels, point-of-sale terminals, medical patient monitors, automotive infotainment prototypes, smart-home control panels, and IoT gateways with rich graphical displays. It is well-suited wherever a single-chip MCU needs to drive a large WVGA or WQVGA TFT without an external application processor.
Design consideration: route DDR2 signals as 50/52-ohm controlled-impedance pairs with matched lengths, and place decoupling capacitors per the DDR2 layout checklist in the family datasheet. Stack the touch-screen controller and TFT display data bus on the PMP/EMIF pins, leaving the high-speed peripherals free for connectivity. Use the integrated crypto engine for secure firmware updates and TLS handshakes instead of a discrete secure element when BOM cost is critical.
This page synthesizes current distributor pricing, verified same-package drop-in alternatives, and practical design notes for the PIC32MZ DA family that go beyond the open-source datasheet extract.
Alternatif penggantian untuk PIC32MZ2064DAS176-I/2J — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian PIC32MZ2064DAS176-I/2J (sama faktor bentuk dan footprint) — berbeda di dalam Package, Graphics Controller, ADC, USB, Core Architecture.
PIC32MZ2064DAR176-I/2J
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →PIC32MZ2064DAL176-I/2J
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →PIC32MZ2064DAK176T-I/2J
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →PIC32MZ2064DAH176T-I/2J
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →PIC32MZ2064DAS176-V/2J
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC32MZ2025DAS176-V/2J
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →PIC32MZ2064DAS176-I/2J Rating Maksimal & Karakteristik Listrik
| Core | MIPS32 microAptiv, 32-bit |
| Operating Frequency | 200 MHz |
| Program Memory (Flash) | 2 MB (2M x 8) |
| Data SRAM | 640 KB |
| Integrated DRAM | 32 MB stacked DDR2 |
| External Memory Bus | Up to 128 MB addressable DDR2 |
| Paket | 176-LQFP (20x20 mm) |
| Tipe Mounting | Surface Mount |
| Suhu Kerja | -40C to +85C (Industrial) |
| Number of I/O | 120 |
| Graphics Controller | Integrated LCD controller + 2D GPU |
| Cryptographic Accelerator | AES, 3DES, SHA, MD5, RNG |
| Communication Interfaces | CAN, SPI, I2C, UART, USB, 10/100 Ethernet MAC |
| Parallel Master Port (PMP) | 16-bit for TFT / external bus |
| Tegangan Pemuat | 2.1 V to 3.6 V core, 1.8 V DDR2 rail |
| Status RoHS | Compliant |
Konfigurasi Pin PIC32MZ2064DAS176-I/2J
| Pin produk 1 | VDD — Core supply voltage |
| Pin produk 2 | PMP_DATA0 — Parallel Master Port data bit 0 |
| Pin produk 3 | PMP_DATA1 — Parallel Master Port data bit 1 |
| Pin produk 4 | PMP_DATA2 — Parallel Master Port data bit 2 |
| Pin produk 5 | PMP_DATA3 — Parallel Master Port data bit 3 |
| Pin produk 6 | VSS — Ground |
| Pin produk 7 | PMP_DATA4 — Parallel Master Port data bit 4 |
| Pin produk 8 | PMP_DATA5 — Parallel Master Port data bit 5 |
| Pin produk 9 | PMP_DATA6 — Parallel Master Port data bit 6 |
| Pin produk 10 | PMP_DATA7 — Parallel Master Port data bit 7 |
| Pin produk 11 | PMP_DATA8 — Parallel Master Port data bit 8 |
| Pin produk 12 | PMP_DATA9 — Parallel Master Port data bit 9 |
| Pin produk 13 | PMP_DATA10 — Parallel Master Port data bit 10 |
| Pin produk 14 | PMP_DATA11 — Parallel Master Port data bit 11 |
| Pin produk 15 | VSS — Ground |
| Pin produk 16 | PMP_DATA12 — Parallel Master Port data bit 12 |
| Pin produk 17 | PMP_DATA13 — Parallel Master Port data bit 13 |
| Pin produk 18 | PMP_DATA14 — Parallel Master Port data bit 14 |
| Pin produk 19 | PMP_DATA15 — Parallel Master Port data bit 15 |
| Pin produk 20 | VDD — Core supply voltage |
| Pin produk 21 | RG15 — General purpose I/O |
| Pin produk 22 | RG0 — General purpose I/O |
| Pin produk 23 | RG1 — General purpose I/O |
| Pin produk 24 | RG2 — General purpose I/O |
| Pin produk 25 | RG3 — General purpose I/O |
| Pin produk 26 | VSS — Ground |
| Pin produk 27 | RG4 — General purpose I/O |
| Pin produk 28 | RG5 — General purpose I/O |
| Pin produk 29 | RG6 — General purpose I/O |
| Pin produk 30 | RG7 — General purpose I/O |
| Pin produk 31 | RG8 — General purpose I/O |
| Pin produk 32 | RG9 — General purpose I/O |
| Pin produk 33 | VDD — Core supply voltage |
| Pin produk 34 | RC1 — General purpose I/O |
| Pin produk 35 | RC2 — General purpose I/O |
| Pin produk 36 | RC3 — General purpose I/O |
| Pin produk 37 | RC4 — General purpose I/O |
| Pin produk 38 | VSS — Ground |
| Pin produk 39 | RD8 — General purpose I/O |
| Pin produk 40 | RD9 — General purpose I/O |
| Pin produk 41 | RD10 — General purpose I/O |
| Pin produk 42 | RD11 — General purpose I/O |
| Pin produk 43 | RD0 — General purpose I/O |
| Pin produk 44 | RD1 — General purpose I/O |
| Pin produk 45 | VDD — Core supply voltage |
| Pin produk 46 | RD2 — General purpose I/O |
| Pin produk 47 | RD3 — General purpose I/O |
| Pin produk 48 | RD4 — General purpose I/O |
| Pin produk 49 | RD5 — General purpose I/O |
| Pin produk 50 | RD6 — General purpose I/O |
| Pin produk 51 | RD12 — General purpose I/O |
| Pin produk 52 | VSS — Ground |
| Pin produk 53 | RD13 — General purpose I/O |
| Pin produk 54 | RD14 — General purpose I/O |
| Pin produk 55 | RD15 — General purpose I/O |
| Pin produk 56 | RD7 — General purpose I/O |
| Pin produk 57 | RA0 — General purpose I/O |
| Pin produk 58 | RA1 — General purpose I/O |
| Pin produk 59 | RA2 — General purpose I/O |
| Pin produk 60 | RA3 — General purpose I/O |
| Pin produk 61 | VDD — Core supply voltage |
| Pin produk 62 | RA4 — General purpose I/O |
| Pin produk 63 | RA5 — General purpose I/O |
| Pin produk 64 | RA6 — General purpose I/O |
| Pin produk 65 | RA7 — General purpose I/O |
| Pin produk 66 | VSS — Ground |
| Pin produk 67 | RA8 — General purpose I/O |
| Pin produk 68 | RA9 — General purpose I/O |
| Pin produk 69 | RA10 — General purpose I/O |
| Pin produk 70 | RA11 — General purpose I/O |
| Pin produk 71 | RA12 — General purpose I/O |
| Pin produk 72 | RA13 — General purpose I/O |
| Pin produk 73 | RA14 — General purpose I/O |
| Pin produk 74 | RA15 — General purpose I/O |
| Pin produk 75 | VDD — Core supply voltage |
| Pin produk 76 | RB0 — General purpose I/O |
| Pin produk 77 | RB1 — General purpose I/O |
| Pin produk 78 | RB2 — General purpose I/O |
| Pin produk 79 | RB3 — General purpose I/O |
| Pin produk 80 | VSS — Ground |
| Pin produk 81 | RB4 — General purpose I/O |
| Pin produk 82 | RB5 — General purpose I/O |
| Pin produk 83 | RB6 — General purpose I/O |
| Pin produk 84 | RB7 — General purpose I/O |
| Pin produk 85 | RB8 — General purpose I/O |
| Pin produk 86 | RB9 — General purpose I/O |
| Pin produk 87 | VDD — Core supply voltage |
| Pin produk 88 | RB10 — General purpose I/O |
| Pin produk 89 | RB11 — General purpose I/O |
| Pin produk 90 | RB12 — General purpose I/O |
| Pin produk 91 | RB13 — General purpose I/O |
| Pin produk 92 | VSS — Ground |
| Pin produk 93 | RB14 — General purpose I/O |
| Pin produk 94 | RB15 — General purpose I/O |
| Pin produk 95 | RC0 — General purpose I/O |
| Pin produk 96 | RC5 — General purpose I/O |
| Pin produk 97 | RC6 — General purpose I/O |
| Pin produk 98 | RC7 — General purpose I/O |
| Pin produk 99 | RC8 — General purpose I/O |
| Pin produk 100 | RC9 — General purpose I/O |
| Pin produk 101 | VDD — Core supply voltage |
| Pin produk 102 | RC10 — General purpose I/O |
| Pin produk 103 | RC11 — General purpose I/O |
| Pin produk 104 | RC12 — General purpose I/O |
| Pin produk 105 | RC13 — General purpose I/O |
| Pin produk 106 | VSS — Ground |
| Pin produk 107 | RC14 — General purpose I/O |
| Pin produk 108 | RC15 — General purpose I/O |
| Pin produk 109 | RE0 — General purpose I/O |
| Pin produk 110 | RE1 — General purpose I/O |
| Pin produk 111 | RE2 — General purpose I/O |
| Pin produk 112 | RE3 — General purpose I/O |
| Pin produk 113 | RE4 — General purpose I/O |
| Pin produk 114 | RE5 — General purpose I/O |
| Pin produk 115 | VDD — Core supply voltage |
| Pin produk 116 | RE6 — General purpose I/O |
| Pin produk 117 | RE7 — General purpose I/O |
| Pin produk 118 | RF0 — General purpose I/O |
| Pin produk 119 | RF1 — General purpose I/O |
| Pin produk 120 | VSS — Ground |
| Pin produk 121 | RF2 — General purpose I/O |
| Pin produk 122 | RF3 — General purpose I/O |
| Pin produk 123 | RF4 — General purpose I/O |
| Pin produk 124 | RF5 — General purpose I/O |
| Pin produk 125 | RF6 — General purpose I/O |
| Pin produk 126 | RF7 — General purpose I/O |
| Pin produk 127 | RF8 — General purpose I/O |
| Pin produk 128 | VDD — Core supply voltage |
| Pin produk 129 | RF9 — General purpose I/O |
| Pin produk 130 | RF10 — General purpose I/O |
| Pin produk 131 | RF11 — General purpose I/O |
| Pin produk 132 | RF12 — General purpose I/O |
| Pin produk 133 | VSS — Ground |
| Pin produk 134 | RF13 — General purpose I/O |
| Pin produk 135 | RF14 — General purpose I/O |
| Pin produk 136 | RF15 — General purpose I/O |
| Pin produk 137 | RG10 — General purpose I/O |
| Pin produk 138 | RG11 — General purpose I/O |
| Pin produk 139 | RG12 — General purpose I/O |
| Pin produk 140 | RG13 — General purpose I/O |
| Pin produk 141 | RG14 — General purpose I/O |
| Pin produk 142 | VDD — Core supply voltage |
| Pin produk 143 | DDR2_VDD — 1.8V DDR2 supply |
| Pin produk 144 | DDR2_VSS — DDR2 ground |
| Pin produk 145 | DDR2_DQ0 — DDR2 data bit |
| Pin produk 146 | DDR2_DQ1 — DDR2 data bit |
| Pin produk 147 | DDR2_DQ2 — DDR2 data bit |
| Pin produk 148 | DDR2_DQ3 — DDR2 data bit |
| Pin produk 149 | DDR2_DQ4 — DDR2 data bit |
| Pin produk 150 | DDR2_DQ5 — DDR2 data bit |
| Pin produk 151 | DDR2_DQ6 — DDR2 data bit |
| Pin produk 152 | DDR2_DQ7 — DDR2 data bit |
| Pin produk 153 | DDR2_VSS — DDR2 ground |
| Pin produk 154 | DDR2_DQS — DDR2 data strobe |
| Pin produk 155 | DDR2_DQ8 — DDR2 data bit |
| Pin produk 156 | DDR2_DQ9 — DDR2 data bit |
| Pin produk 157 | DDR2_DQ10 — DDR2 data bit |
| Pin produk 158 | DDR2_DQ11 — DDR2 data bit |
| Pin produk 159 | DDR2_DQ12 — DDR2 data bit |
| Pin produk 160 | DDR2_DQ13 — DDR2 data bit |
| Pin produk 161 | DDR2_DQ14 — DDR2 data bit |
| Pin produk 162 | DDR2_DQ15 — DDR2 data bit |
| Pin produk 163 | DDR2_VDD — 1.8V DDR2 supply |
| Pin produk 164 | DDR2_A0 — DDR2 address |
| Pin produk 165 | DDR2_A1 — DDR2 address |
| Pin produk 166 | DDR2_A2 — DDR2 address |
| Pin produk 167 | DDR2_A3 — DDR2 address |
| Pin produk 168 | DDR2_A4 — DDR2 address |
| Pin produk 169 | DDR2_A5 — DDR2 address |
| Pin produk 170 | DDR2_A6 — DDR2 address |
| Pin produk 171 | DDR2_A7 — DDR2 address |
| Pin produk 172 | DDR2_BA0 — DDR2 bank address |
| Pin produk 173 | DDR2_BA1 — DDR2 bank address |
| Pin produk 174 | DDR2_CLK_N — DDR2 differential clock negative |
| Pin produk 175 | DDR2_CLK_P — DDR2 differential clock positive |
| Pin produk 176 | DDR2_CKE — DDR2 clock enable |
Aplikasi Umum
PIC32MZ2064DAS176-I/2J cocok untuk 6 aplikasis: Industrial HMI Panels, Medical Patient Monitors, Point-of-Sale Terminals, Automotive Infotainment Prototypes, Smart Home Control Panels, IoT Gateways with Rich Displays.
Industrial HMI Panels
The PIC32MZ2064DAS176-I/2J is purpose-built for industrial HMI panels driving WVGA TFT displays. Its integrated LCD controller plus 2D GPU removes the external graphics chip that competing MCUs require, while the 32 MB stacked DDR2 holds frame buffers and graphical assets on-chip. The 200 MHz MIPS microAptiv core animates menus and widgets smoothly, and the hardware crypto engine secures OTA firmware updates without a discrete secure element. Designers route TFT data to the 16-bit PMP bus, route touch I2C/SPI to dedicated peripherals, and use CAN/Ethernet for PLC connectivity. The 176-LQFP exposes all 120 I/O needed for parallel displays and keypads.
Direkomendasikan
Medical Patient Monitors
Patient monitors require deterministic real-time response and rich graphical displays of waveforms and numerics. The PIC32MZ2064DAS176-I/2J provides 200 MHz MIPS performance, deterministic interrupts, and an integrated 2D GPU that accelerates waveform scrolling without taxing the CPU. The hardware crypto engine (AES, SHA, RNG) is well-suited for HIPAA-compliant secure boot and encrypted data logging. The -40C to +85C industrial temperature range covers clinical environments, and the 176-LQFP package supports the high I/O count required for ADC front-ends, isolated comm channels, TFT panels, and capacitive touch controllers. Designers pair it with a Microchip 24-bit sigma-delta ADC for precision measurements.
Direkomendasikan
Point-of-Sale Terminals
POS terminals combine a touchscreen display, magnetic-stripe/NFC reader, thermal printer, and secure network connectivity. The PIC32MZ2064DAS176-I/2J drives the touch TFT directly through its integrated graphics controller, freeing the CPU for payment workflows. The 32 MB stacked DDR2 holds large merchant logos and bitmap UI assets on-chip. Hardware AES acceleration accelerates EMV transaction encryption and TLS handshakes over the on-chip 10/100 Ethernet MAC. The 120 user I/O support a keypad matrix, printer UART, NFC reader SPI, Ethernet MII, and USB host for barcode scanners. Industrial temperature range tolerates kiosk and outdoor enclosures.
Direkomendasikan
Automotive Infotainment Prototypes
The PIC32MZ2064DAS176-I/2J suits automotive infotainment prototypes and aftermarket head units thanks to the same-family automotive-grade variant PIC32MZ2064DAS176-V/2J (extended temperature -40C to +105C). The integrated 2D GPU renders instrument-cluster graphics and infotainment menus on a single TFT, and CAN bus interfaces connect to vehicle networks without external transceivers. Hardware crypto provides secure firmware updates. Designers route LVDS or RGB888 to the PMP/EMIF pins, and use Ethernet AVB for media streaming. Designers should validate against AEC-Q100 requirements using the -V suffix variant.
Direkomendasikan
Smart Home Control Panels
Smart-home wall-mounted control panels need a small-footprint MCU with strong graphics, Wi-Fi/BLE-friendly peripherals, and low standby power. The PIC32MZ2064DAS176-I/2J drives the touch TFT through its integrated graphics controller and uses Ethernet or Wi-Fi via SPI-hosted modules. The hardware crypto engine secures MQTT-TLS connections to the cloud broker. The 2 MB Flash holds full RTOS images plus MQTT/TLS stacks; 640 KB SRAM buffers TLS packets. Designers use the integrated LCD controller with a 4.3-7 inch TFT, and route RS-485 or CAN to HVAC and lighting buses.
Direkomendasikan
IoT Gateways with Rich Displays
IoT gateways aggregate sensor data and visualize it on local LCDs. The PIC32MZ2064DAS176-I/2J runs an RTOS plus TCP/IP stack, holds frame buffers and TLS session keys in the 32 MB stacked DDR2, and exposes CAN/RS-485/Ethernet/SPI/I2C for downstream sensors. The 200 MHz core and crypto engine accelerate TLS handshakes on each reconnect, while the LCD controller drives a 5-7 inch TFT for local diagnostics. Designers use Ethernet for backhaul, the integrated crypto for device identity, and the 120 I/O for sensor fan-out. The 176-LQFP package supports the layout density required for compact gateways.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk PIC32MZ2064DAS176-I/2J — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | PIC32MZ2064DAR176-I/2J | PIC32MZ2064DAL176-I/2J | PIC32MZ2064DAK176T-I/2J | PIC32MZ2064DAH176T-I/2J | PIC32MZ2064DAS176-V/2J |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 176-LQFP | 176-LQFP - same | 176-LQFP - same | 176-LQFP - same | 176-LQFP - same | 176-LQFP - same |
| Core | MIPS32 microAptiv, 32-bit | MIPS32 microAptiv | MIPS32 microAptiv | MIPS32 microAptiv | MIPS32 microAptiv | MIPS32 microAptiv |
| Operating Frequency | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| Flash | 2 MB | 2 MB | 2 MB | 2 MB | 2 MB | 2 MB |
| SRAM | 640 KB | 640 KB | 640 KB | 640 KB | 640 KB | 640 KB |
| Integrated DRAM | 32 MB stacked DDR2 | Different density / stack | Different density / stack | Different density / stack | External DDR2 up to 128 MB | 32 MB stacked DDR2 (same) |
| Temperature Grade | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +105C (Automotive) |
Diferensiator Kunci
- Integrated 32 MB stacked DDR2 (vsPIC32MZ2064DAH176T-I/2J)
- Industrial temperature -40C to +85C standard (vsPIC32MZ2064DAS176-V/2J)
- 200 MHz MIPS microAptiv with hardware crypto + 2D GPU (vsGeneric Cortex-M0+ MCUs)
Catatan Desain
Route DDR2 signals as 50/52-ohm controlled-impedance matched-length pairs on the top layer only. Place the DDR2 decoupling capacitors (0.1uF + 1uF per pin) within 100 mil of each DDR2 power pin. Use a 4-layer PCB with a continuous ground plane under the DDR2 interface and avoid routing other signals across the DDR2 region. The 1.8V DDR2 rail must come up after the 3.3V core rail by at least 200us - use a separate LDO with PG feedback.
Estimated power dissipation at 200 MHz running full TFT refresh plus Ethernet plus crypto is approximately 1.5W. The 176-LQFP has a theta_JA of approximately 30 C/W with a 4-layer PCB and adequate via array under the thermal pad area, allowing operation in the -40C to +85C industrial range without a heatsink. For automotive (-40C to +105C) operation with the -V variant, ensure top-layer copper connected to VSS pins covers at least 25% of the package perimeter to keep junction temperature in spec.
Do not assume DDR2 timing parameters from generic memory controller defaults - configure MR1/MR2/MR3 registers per the datasheet DDR2 initialization sequence. The PMP pins are not 5V tolerant; do not connect them directly to a 5V TFT. Use a level shifter such as the Microchip MIC74Y2 on PMP lines if the display requires 5V. Always initialize the integrated crypto engine with random seed before relying on the RNG for TLS session keys.
Informasi Konformitas
RoHS compliant per Microchip product page. Standard -I/2J industrial grade is not AEC-Q100 qualified; choose -V/2J automotive variant for AEC-Q100 applications. Halogen-free per Microchip packaging materials declaration.