PIC32MZ2064DAH176T-I/2J - 200MHz 32-bit MCU 2MB Flash | Microchip
MPN: PIC32MZ2064DAH176T-I/2J ✓ Active| Qty | Unit Price | Extended |
|---|---|---|
| 1 | $24.89 | $24.89 |
| 10 | $22.4 | $224.00 |
| 100 | $19.91 | $1,991.00 |
| 500 | $17.42 | $8,710.00 |
| 1,000 | $15.51 | $15,510.00 |
PIC32MZ2064DAH176T-I/2J Overview
An LQFP-176 (Low-profile Quad Flat Package) microcontroller is a surface-mount IC package with 176 gull-wing leads on a 20 mm x 20 mm body and an exposed pad for thermal dissipation; it sits inside the broader LQFP package family -> QFP family -> surface-mount IC packaging hierarchy. PIC32MZ DA-series devices are positioned between conventional MCUs and MPUs, providing MPU-like graphics performance while retaining the deterministic peripheral set of a microcontroller.
Key features of the PIC32MZ2064DAH176T-I/2J include a single-core MIPS32 microAptiv core with FPU, hardware crypto acceleration, an integrated LCD controller, up to 45 analog inputs for the 12-bit ADC, an HS USB 2.0 PHY on-chip, and a DDR2 DRAM controller that supports 32 MB or 128 MB external memories. The device supports an operating voltage of 2.2V to 3.6V, industrial-grade temperature range of -40C to +85C, and 200 MHz operation with hardware FPU and DSP extensions.
The PIC32MZ DA architecture pairs a high-throughput MIPS32 core with a dedicated graphics pipeline, allowing up to WQVGA or higher resolutions to be rendered without taxing the application CPU. DDR2 memory support up to 128 MB enables frame buffer expansion for rich graphical user interfaces, and the integrated crypto engine supports AES, DES, 3DES, SHA, and HMAC acceleration for secure applications.
Typical applications include industrial HMI panels with resistive or capacitive touch, automotive dashboard and cluster displays, point-of-sale terminals, medical patient monitors, and home-automation controllers. The combination of HS USB, Ethernet, and CAN peripherals also suits the part for industrial-control gateway products that must bridge multiple fieldbuses.
When designing with the PIC32MZ2064DAH176T-I/2J, pay close attention to DDR2 routing: the external memory bus has strict length-matching and impedance requirements, and the reference clock must be filtered. Microchip recommends using MPLAB Harmony v3 and the PIC32MZ DA BSP for peripheral stacks.
This page synthesizes distributor pricing, drop-in PIC32MZ DA family alternatives, and practical design notes that complement the manufacturer datasheet without copying it.
Drop-in alternatives for PIC32MZ2064DAH176T-I/2J — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with PIC32MZ2064DAH176T-I/2J (same form factor and footprint) — differing in USB, Graphics Controller, Package, CAN, ADC.
Quick Comparison Tool — Select alternative parts for side-by-side comparison:
PIC32MZ2064DAH176-I/2J
✅ Drop-In✓ In Stock
$11.3 / Unit
View Datasheet →PIC32MZ2064DAG176T-I/2J
✅ Drop-In✓ In Stock
$22.05 / Unit
View Datasheet →PIC32MZ2064DAB176T-I/2J
✅ Drop-In✓ In Stock
$9.45 / Unit
View Datasheet →PIC32MZ2064DAA176T-I/2J
✅ Drop-In✓ In Stock
$13.1 / Unit
View Datasheet →PIC32MZ2064DAS176
✅ Drop-In📋 Reference alternative (not in catalog)
PIC32MZ1064DAG176T-I/2J
✅ Drop-In✓ In Stock
$8.18 / Unit
View Datasheet →PIC32MZ2064DAH176T-I/2J Maximum Ratings & Electrical Characteristics
| Core Architecture | MIPS32 microAptiv |
| Core Count | 1 (single-core) |
| Max CPU Speed | 200 MHz |
| Program Flash | 2 MB (2M x 8) |
| SRAM | 640 KB |
| External Memory Bus | DDR2 DRAM controller, up to 128 MB external |
| Operating Voltage | 2.2 V to 3.6 V |
| ADC | 12-bit, 18 MSPS, up to 45 analog inputs |
| Graphics Controller | Integrated GPU and LCD controller |
| Crypto Engine | AES / DES / 3DES / SHA / HMAC hardware acceleration |
| USB | USB 2.0 High-Speed (HS) PHY integrated |
| Networking | 10/100 Ethernet MAC and CAN 2.0b |
| Package | 176-LQFP EP (20 x 20 mm) |
| Operating Temperature | -40 C to +85 C (industrial) |
| Mounting Type | Surface Mount |
| MSL Level | 3 (per JEDEC J-STD-020) |
| RoHS Status | Compliant |
PIC32MZ2064DAH176T-I/2J 176-lqfp ep (20 x 20 mm) Pin Configuration Guide
Pin configuration for PIC32MZ2064DAH176T-I/2J (176-lqfp ep (20 x 20 mm) package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for PIC32MZ2064DAH176T-I/2J.
Refer to the datasheet for full pin configuration.
Typical Applications
PIC32MZ2064DAH176T-I/2J is suitable for 6 applications: Industrial HMI Touch Panels, Automotive Dashboard and Cluster Displays, Point-of-Sale Terminals, Medical Patient Monitors, Home-Automation Controllers, Industrial Control Gateways.
Industrial HMI Touch Panels
The PIC32MZ2064DAH176T-I/2J drives WQVGA and higher resolution touch panels with low CPU overhead. The 200 MHz MIPS32 microAptiv core, integrated GPU, and DDR2 controller (up to 128 MB external) enable smooth 60 fps rendering of layered graphics while leaving MIPS for the control logic. The industrial -40C to +85C rating supports factory-floor deployments, and the 12-bit 18 MSPS ADC with up to 45 inputs interfaces directly with analog sensor inputs.
Recommended
Automotive Dashboard and Cluster Displays
The PIC32MZ2064DAH176T-I/2J serves as the controller for graphical instrument clusters and centre-stack displays. The integrated GPU accelerates render tasks while the MIPS32 core runs real-time CAN 2.0b stacks, and the hardware crypto engine protects secure diagnostics. With 2 MB Flash and 640 KB SRAM, complex gauge animations and driver-assistance graphics fit comfortably on-chip, reducing external memory cost for body electronics modules.
Recommended
Point-of-Sale Terminals
Point-of-sale terminals require a rich GUI plus secure payment workflows, which the PIC32MZ2064DAH176T-I/2J addresses directly. The integrated AES, DES, 3DES, SHA, and HMAC crypto engine accelerates payment encryption, while the 200 MHz core and DDR2 memory bus drive barcode-scanner feedback and customer-facing displays. HS USB and Ethernet simplify connectivity to backend POS networks and printers.
Recommended
Medical Patient Monitors
Patient monitors combine multiple waveforms, alarm management, and secure data logging, which is well matched to the PIC32MZ2064DAH176T-I/2J. The 12-bit 18 MSPS ADC samples multiple physiological signals simultaneously, and the DDR2 controller stores waveform buffers. Hardware crypto protects patient data at rest, while the industrial temperature range supports use in clinical equipment housings.
Recommended
Home-Automation Controllers
Home-automation gateways aggregate Zigbee, Z-Wave, Wi-Fi, and wired buses; the PIC32MZ2064DAH176T-I/2J handles the GUI plus protocol bridges. Ethernet, HS USB, and CAN peripherals provide the wired interfaces, while the GPU-accelerated LCD controller drives 7-inch or larger touch displays. The 640 KB SRAM and 2 MB Flash leave ample room for rich protocol stacks and OTA update buffers.
Recommended
Industrial Control Gateways
Industrial gateways bridge CAN, Modbus, Ethernet/IP, and serial fieldbuses; the PIC32MZ2064DAH176T-I/2J serves as the supervisory controller plus HMI. The combination of CAN 2.0b, Ethernet, and HS USB simplifies multi-bus routing, while the integrated GPU powers a local diagnostic display. Industrial -40C to +85C operation and the 176-LQFP EP package support harsh-environment deployments.
Recommended
Recommended Products Summary
Engineering reference data for PIC32MZ2064DAH176T-I/2J — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | PIC32MZ2064DAH176-I/2J | PIC32MZ2064DAG176T-I/2J | PIC32MZ2064DAB176T-I/2J | PIC32MZ2064DAA176T-I/2J | PIC32MZ2064DAS176 | PIC32MZ1064DAG176T-I/2J |
|---|---|---|---|---|---|---|---|
| Package | 176-LQFP EP (20x20) | 176-LQFP EP (20x20) | 176-LQFP EP (20x20) | 176-LQFP EP (20x20) | 176-LQFP EP (20x20) | 176-LQFP EP (20x20) | 176-LQFP EP (20x20) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Max CPU Speed | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| Program Flash | 2 MB | 2 MB | 2 MB | 2 MB | 2 MB | 2 MB | 1 MB |
| SRAM | 640 KB | 640 KB | 640 KB | 256 KB | 256 KB | 640 KB | 256 KB |
| DDR2 Controller | Yes (up to 128 MB) | Yes (up to 128 MB) | Yes (up to 128 MB) | Yes (up to 128 MB) | Yes (up to 128 MB) | Yes (up to 128 MB) | Yes (up to 128 MB) |
| Crypto Engine | Yes (AES/DES/SHA/HMAC) | Yes | Yes | No | No | Yes | Yes |
| Recommended For | Full-feature HMI | Tray-packaged equivalent | G-revision equivalent | Cost-optimised HMI | Lower-cost clusters | New-design successor | Lower-density GUI |
Key Differentiators
- Highest Flash and SRAM density in the PIC32MZ DA family (vs PIC32MZ2064DAB176T-I/2J)
- Integrated hardware crypto engine (vs PIC32MZ2064DAA176T-I/2J)
- Drop-in compatibility with refreshed successor silicon (vs PIC32MZ2064DAS176)
Design Notes
Route the DDR2 memory bus with matched trace lengths and 50-ohm controlled impedance; the 176-LQFP EP package exposes a thermal pad that must be soldered to a continuous ground plane for both thermal dissipation and signal return. Place the DDR2 reference decoupling within 5 mm of the memory power pins to meet JEDEC DDR2 settling requirements.
Estimated: at 200 MHz core clock and 3.3V supply, the typical active current is around 100 mA (estimated from family datasheet figures), so power dissipation is roughly 0.33 W. With the 176-LQFP EP theta_JA of approximately 25 C/W on a 4-layer JEDEC test board, the junction rises about 8 C above ambient - well within the -40C to +85C industrial range.
Do not skip configuration of the DDR2 phase-locked loop before first code execution; a missing PLL lock prevents the external memory bus from initialising and the application will trap on first memory access. Always generate the project from MPLAB Harmony v3 to obtain validated DDR2 timing settings for the chosen memory vendor.
Keep the HS USB DP/DN traces length-matched within 4 mm and isolated from the LCD data bus to avoid EMI coupling; place the 24 MHz crystal within 5 mm of the OSC pins and guard the traces with a ground pour. Use Microchip's PIC32MZ DA schematic checklist to validate supply sequencing before PCB fab.
Compliance Information
RoHS compliant per Microchip product page. The DAH variant is industrial grade (-40C to +85C) but not AEC-Q100 qualified; use the DAA176T variant for AEC-Q100 requirements.
