S912XDG256F1MAA - 16-Bit 80MHz HCS12X MCU 256KB Flash | NXP
MPN: S912XDG256F1MAA ✗ Akhir HidupS912XDG256F1MAA Ringkasan
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), data memory (RAM), and peripherals such as timers, communication interfaces (UART, SPI, I2C, CAN), and analog blocks. HCS12X microcontrollers extend the legacy HCS12 architecture by adding an enhanced indexed addressing mode, an instruction queue, a richer instruction set, and interrupt stacking identical to the HCS12 programmer's model, while remaining upward object-code compatible with the HCS12 instruction set. Within the broader taxonomy, the S912XDG256F1MAA belongs to: 16-bit MCU -> HCS12X family -> automotive MCU -> embedded microcontroller -> semiconductor IC. This hierarchy allows engineers to map it to reference designs, software libraries, and toolchains shared across the wider S12X platform.
Key features of the S912XDG256F1MAA include 256KB on-chip Flash memory (256K x 8), 80 MHz maximum bus frequency, automotive-grade temperature range, and integration of MSCAN, SCI, SPI and PWM peripherals. The device supports background debug mode (BDM) for in-circuit emulation and non-intrusive debugging, plus on-chip voltage regulator and oscillator options that simplify system-level bill of materials.
The S912XDG256F1MAA's S12X core uses a 16-bit CPU with an XGATE co-processor (depending on variant) and 22-bit memory addressing, providing deterministic interrupt response critical for body and powertrain control. AEC-Q100 qualification allows direct deployment in safety-related modules such as steering, braking and engine management, where the part must withstand voltage transients and thermal stress per automotive standards.
Typical applications include automotive body control modules (BCM), instrument clusters, HVAC controllers, seat and door zone modules, and CAN/J1939 networked sensor nodes. Industrial applications include factory automation controllers and PLCs that benefit from the same automotive robustness and the broad S12X tool ecosystem (CodeWarrior, S32 Design Studio IDE).
When designing with this device, allocate PCB area for an 80-pin QFP footprint (14x14 mm body) and decoupling capacitors close to all VDD/VSS pin pairs. Verify supply tolerance versus the on-chip regulator's input range and confirm that BDM interface lines are accessible for production programming. Always verify voltage and peripheral mappings against the latest NXP datasheet before committing to layout.
This page synthesizes distributor pricing, drop-in S12X family alternatives, and practical design notes not found in the manufacturer datasheet alone.
Alternatif penggantian untuk S912XDG256F1MAA — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
S912XD256F1MAA
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
S912XDG256F2MAA
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
MC9S12XDG256CAA
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
MC9S12XD256CAA
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
MC9S12XDG256VPV
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
S912XDG256F1MAA Rating Maksimal & Karakteristik Listrik
| Core Architecture | HCS12X (16-bit) |
| Instruction Set | HCS12 (upward-compatible, enhanced indexed addressing) |
| Program Memory | 256 KB Flash (256K x 8) |
| Maximum CPU Frequency | 80 MHz |
| Rentang Suhu Kerja | -40°C to +125°C (Automotive) |
| Paket | 80-QFP (14x14 mm) |
| Tipe Mounting | Surface Mount |
| Automotive Qualification | AEC-Q100 |
| Communication Interfaces | MSCAN, SCI, SPI |
| Debugger Interface | Background Debug Mode (BDM) |
| Status RoHS | Compliant (per distributor listings) |
| Lebar Bus Data | 16-bit |
Konfigurasi Pin S912XDG256F1MAA
| Pin produk 1 | VSS — Ground |
| Pin produk 2 | VDD — Digital supply |
| Pin produk 3 | VDDR — Internal regulator supply |
| Pin produk 4 | XCLKS — Oscillator mode select |
| Pin produk 5 | XTAL — Crystal oscillator input |
| Pin produk 6 | EXTAL — Crystal oscillator input |
| Pin produk 7 | RESET — External reset input (active low) |
| Pin produk 8 | BKGD — Background Debug Mode data |
| Pin produk 9 | PE7 — Port E bit 7 / XIRQ |
| Pin produk 10 | PE6 — Port E bit 6 / IRQ |
| Pin produk 11 | PE5 — Port E bit 5 |
| Pin produk 12 | PE4 — Port E bit 4 / ECLK |
| Pin produk 13 | PE3 — Port E bit 3 |
| Pin produk 14 | PE2 — Port E bit 2 |
| Pin produk 15 | PE1 — Port E bit 1 / TXD0 |
| Pin produk 16 | PE0 — Port E bit 0 / RXD0 |
| Pin produk 17 | PA7 — Port A bit 7 |
| Pin produk 18 | PA6 — Port A bit 6 |
| Pin produk 19 | PA5 — Port A bit 5 |
| Pin produk 20 | PA4 — Port A bit 4 |
| Pin produk 21 | PA3 — Port A bit 3 |
| Pin produk 22 | PA2 — Port A bit 2 |
| Pin produk 23 | PA1 — Port A bit 1 |
| Pin produk 24 | PA0 — Port A bit 0 |
| Pin produk 25 | PB7 — Port B bit 7 |
| Pin produk 26 | PB6 — Port B bit 6 |
| Pin produk 27 | PB5 — Port B bit 5 |
| Pin produk 28 | PB4 — Port B bit 4 |
| Pin produk 29 | PB3 — Port B bit 3 |
| Pin produk 30 | PB2 — Port B bit 2 |
| Pin produk 31 | PB1 — Port B bit 1 |
| Pin produk 32 | PB0 — Port B bit 0 |
| Pin produk 33 | PC7 — Port C bit 7 |
| Pin produk 34 | PC6 — Port C bit 6 |
| Pin produk 35 | PC5 — Port C bit 5 |
| Pin produk 36 | PC4 — Port C bit 4 |
| Pin produk 37 | PC3 — Port C bit 3 |
| Pin produk 38 | PC2 — Port C bit 2 |
| Pin produk 39 | PC1 — Port C bit 1 |
| Pin produk 40 | PC0 — Port C bit 0 |
| Pin produk 41 | PD7 — Port D bit 7 |
| Pin produk 42 | PD6 — Port D bit 6 |
| Pin produk 43 | PD5 — Port D bit 5 |
| Pin produk 44 | PD4 — Port D bit 4 |
| Pin produk 45 | PD3 — Port D bit 3 |
| Pin produk 46 | PD2 — Port D bit 2 |
| Pin produk 47 | PD1 — Port D bit 1 |
| Pin produk 48 | PD0 — Port D bit 0 |
| Pin produk 49 | PJ7 — Port J bit 7 |
| Pin produk 50 | PJ6 — Port J bit 6 |
| Pin produk 51 | PJ5 — Port J bit 5 |
| Pin produk 52 | PJ4 — Port J bit 4 |
| Pin produk 53 | PJ3 — Port J bit 3 |
| Pin produk 54 | PJ2 — Port J bit 2 |
| Pin produk 55 | PJ1 — Port J bit 1 |
| Pin produk 56 | PJ0 — Port J bit 0 |
| Pin produk 57 | PK7 — Port K bit 7 / ECS |
| Pin produk 58 | PK6 — Port K bit 6 / XCS |
| Pin produk 59 | PK5 — Port K bit 5 |
| Pin produk 60 | PK4 — Port K bit 4 |
| Pin produk 61 | PK3 — Port K bit 3 |
| Pin produk 62 | PK2 — Port K bit 2 |
| Pin produk 63 | PK1 — Port K bit 1 |
| Pin produk 64 | PK0 — Port K bit 0 |
| Pin produk 65 | PH7 — Port H bit 7 / SS0 |
| Pin produk 66 | PH6 — Port H bit 6 / SCK0 |
| Pin produk 67 | PH5 — Port H bit 5 / MOSI0 |
| Pin produk 68 | PH4 — Port H bit 4 / MISO0 |
| Pin produk 69 | PH3 — Port H bit 3 / SS1 |
| Pin produk 70 | PH2 — Port H bit 2 / SCK1 |
| Pin produk 71 | PH1 — Port H bit 1 / MOSI1 |
| Pin produk 72 | PH0 — Port H bit 0 / MISO1 |
| Pin produk 73 | PM7 — Port M bit 7 / CAN TX |
| Pin produk 74 | PM6 — Port M bit 6 / CAN RX |
| Pin produk 75 | PM5 — Port M bit 5 |
| Pin produk 76 | PM4 — Port M bit 4 |
| Pin produk 77 | PM3 — Port M bit 3 |
| Pin produk 78 | PM2 — Port M bit 2 |
| Pin produk 79 | PM1 — Port M bit 1 |
| Pin produk 80 | PM0 — Port M bit 0 |
Aplikasi Umum
S912XDG256F1MAA cocok untuk 6 aplikasis: Automotive Body Control Module (BCM), Instrument Cluster, HVAC Control Module, Door Zone Module, Industrial CAN-based PLC, Automotive Sensor Node (CAN/J1939).
Automotive Body Control Module (BCM)
The S912XDG256F1MAA fits automotive body control modules because of its AEC-Q100 qualification, 256KB Flash for body firmware, 80 MHz HCS12X CPU for responsive CAN message handling, and integrated MSCAN controller. The 80-QFP (14x14) package delivers ample I/O count for body functions while keeping PCB area compact. Engineers pair it with a CAN PHY such as TJA1050 and use SPI to drive LED matrix tail lamps. Compared to a switching regulator based power tree, the on-chip regulator simplifies the BCM voltage rail and lowers BOM cost. The same firmware architecture can be reused across multiple vehicle platforms thanks to S12X code compatibility.
Direkomendasikan
Instrument Cluster
For instrument cluster designs, the S912XDG256F1MAA's 256KB Flash holds full graphics + diagnostics firmware, while 80 MHz CPU cycles drive stepper motor pointers and LCD segment drivers via SPI. The automotive -40°C to +125°C grade keeps pointer accuracy stable across cold-crank and under-hood heat soak. AEC-Q100 qualification supports ISO 26262 functional safety discussions at the module level. The 80-QFP (14x14) footprint fits behind a typical 3.5-inch cluster display with room for backlight driver ICs. Compared to lower-density MCUs, fewer external decoder ICs are needed because of the richer on-chip peripheral count.
Direkomendasikan
HVAC Control Module
In HVAC controllers, the S912XDG256F1MAA handles blower PWM, temperature sensing, and CAN/LIN body networking. The device's SCI and SPI blocks drive actuator drivers and LCD character displays. AEC-Q100 qualification and the wide automotive temperature range allow placement in the headliner or center-console area exposed to solar load. Compared with a Cortex-M0+ alternative, the S12X delivers a more deterministic interrupt response when multiple sensor inputs must be serviced in real time. The on-chip regulator simplifies the 5V-to-3.3V supply chain, reducing BOM parts.
Direkomendasikan
Door Zone Module
Door zone modules benefit from the S912XDG256F1MAA's MSCAN interface for chassis CAN body networking, combined with PWMs for window lift, mirror fold, and door-lock actuators. The 256KB Flash supports door-controller firmware along with LIN secondary communication. The automotive -40°C to +125°C grade tolerates door-cavity temperature swings. The 80-QFP footprint fits the typical 60x80 mm door-module PCB with margin. Compared to lower-end 8-bit door MCUs, this part centralizes CAN, PWM, and sensor conditioning in one chip, reducing module cost and PCB area.
Direkomendasikan
Industrial CAN-based PLC
The S912XDG256F1MAA supports industrial CANopen or DeviceNet PLCs thanks to its 256KB Flash for ladder/control logic and its integrated MSCAN. The 80 MHz HCS12X CPU executes deterministic control loops with microsecond-level jitter. The -40°C to +125°C grade lets the PLC be deployed in cabinets near motors without additional thermal protection. The 80-QFP (14x14) footprint is compatible with standard IPC-7351 land patterns used in industrial PCB assembly. Compared to a discrete SBC + MCU pair, this part consolidates CAN, timers, and communication peripherals for a lower BoM.
Direkomendasikan
Automotive Sensor Node (CAN/J1939)
Distributed sensor nodes in commercial-vehicle CAN/J1939 networks use the S912XDG256F1MAA for its 256KB Flash (sensor-firmware plus J1939 stack) and MSCAN controller. AEC-Q100 qualification supports deployment in engine compartments and chassis environments. The 80-QFP package, while larger than QFN alternatives, supports industrial through-hole reflow profiles used by tier-1 automotive suppliers. Compared to a smaller 8-bit node MCU, the S12X lets one node serve multiple sensors, reducing harness weight and node count across the vehicle.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk S912XDG256F1MAA — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | S912XD256F1MAA | S912XDG256F2MAA | MC9S12XDG256CAA | MC9S12XD256CAA | MC9S12XDG256VPV |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 80-QFP (14x14) | 80-QFP (14x14) | 80-QFP (14x14) | 80-QFP (14x14) | 80-QFP (14x14) | 80-QFP (14x14) |
| Core Architecture | HCS12X (16-bit) | HCS12X (16-bit) | HCS12X (16-bit) | HCS12X (16-bit) | HCS12X (16-bit) | HCS12X (16-bit) |
| Flash Memory | 256 KB | 256 KB | 256 KB | 256 KB | 256 KB | 256 KB |
| Max CPU Frequency | 80 MHz | 80 MHz | 80 MHz | 50 MHz (C-bin) | 50 MHz (C-bin) | 80 MHz |
| CAN Controller | MSCAN | MSCAN | MSCAN | MSCAN | MSCAN | MSCAN |
| Debugger Interface | BDM | BDM | BDM | BDM | BDM | BDM |
Diferensiator Kunci
- Automotive AEC-Q100 qualified with 80 MHz HCS12X core (vsMC9S12XD256CAA)
- Larger Flash (256KB) at 80 MHz in automotive grade (vsS912XEG128W1MAA)
- Identical 80-QFP (14x14) footprint as other S12XD parts (vsS912XDP512J1MAL)
Catatan Desain
Estimated: Place a 0.1µF ceramic decoupling capacitor as close as possible to each VDD/VSS pair on the S912XDG256F1MAA 80-QFP, plus a bulk 10µF tantalum or ceramic on VDDR. S12X devices have multiple supply pins and the regulator supply (VDDR) must be bypassed with a low-ESR cap per datasheet to prevent core POR instability. Verify the actual VDD range and pin map against the latest NXP S12XD datasheet before layout.
Route the BDM (BKGD) signal and RESET line away from high-current switching nodes such as DC-DC converters and motor-driver traces. Keep the XTAL/EXTAL traces short and symmetric, with a guarded ground pour on both sides to minimize jitter on the 80 MHz internal bus. For automotive EMC compliance, place series damping resistors on signal lines that exit the module enclosure.
Do not assume that S12XD variants in different speed bins or temperature grades are drop-in compatible. The 'F1' speed grade (80 MHz) and the 'C' speed grade (typically 50 MHz) require different PLL configuration software. Always cross-check the device markings and datasheet revision before ordering replacements for production boards.
Informasi Konformitas
Per distributor listings (DigiKey, Mouser, Newark) the S912XDG256F1MAA is RoHS compliant and AEC-Q100 qualified. REACH and halogen-free status not explicitly published - flagged as unknown pending datasheet review.