S912ZVMC64F3MKH - S12Z 50MHz 64KB Flash MCU | NXP MagniV
MPN: S912ZVMC64F3MKH ✓ AktifS912ZVMC64F3MKH Ringkasan
A microcontroller (MCU) is a single-chip computer containing a CPU core, non-volatile program memory (Flash), working memory (RAM), and a configurable set of peripherals such as timers, ADC, communication controllers, and GPIO. Within the broader semiconductor taxonomy, an MCU belongs to the logic IC family, then to the embedded processor hierarchy, then to the automotive-qualified sub-class when AEC-Q100 qualification applies. The S12 MagniV line is purpose-built for the in-vehicle networking segment where single-chip integration reduces PCB area, BOM count, and bill-of-materials cost compared with a discrete MCU plus external LIN/CAN transceiver approach.
Key features of the S912ZVMC64F3MKH include 64KB on-chip Flash (64K x 8), 4KB RAM, 512 bytes EEPROM, 31 GPIO, a 10-channel PWM module, DMA, watchdog, and power-on reset. The integrated CANbus controller supports both standard and extended frame formats and is widely used in automotive body control modules such as HVAC, lighting, and door/window controllers. Operating temperature spans -40C to +125C, qualifying the device for AEC-Q100 Grade 1 automotive environments.
Architecturally the device pairs the S12Z CPU (an enhanced 16-bit core with improved instruction throughput over the legacy S12X) with on-chip voltage regulator and CAN PHY, enabling direct 12V battery connection with minimum external components. The single-die integration reduces quiescent current paths and improves electromagnetic compatibility versus discrete solutions.
Typical applications include automotive HVAC control modules, body controllers, door modules, seat controllers, lighting controllers, and small DC motor control nodes where the CAN interface, small footprint, and integrated high-voltage tolerance simplify design. The exposed pad on the LQFP-64 package provides a low thermal resistance path for sustained processor activity.
Designers should note that the -40C to +125C operating range supports under-hood and cabin mounting, while the integrated 5V regulator powers both the internal logic and external sensors. Proper decoupling of the high-voltage analog supply (VDDX) and the digital logic supply (VDDR) is essential for clean CAN signaling.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
Alternatif penggantian untuk S912ZVMC64F3MKH — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian S912ZVMC64F3MKH (sama faktor bentuk dan footprint) — berbeda di dalam EEPROM Size, Package Type.
S912ZVML64F3MKH
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
S912ZVML64F3WKH
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
S912ZVMC64F3MKK
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
S912ZVMC64F3MK
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
S912ZVMC64F3MKH Rating Maksimal & Karakteristik Listrik
| Core Processor | S12Z |
| Core Size | 16-Bit |
| Maximum Clock Speed | 50 MHz |
| Program Memory Size | 64 KB (64K x 8) Flash |
| RAM Size | 4 KB (4K x 8) |
| EEPROM Size | 512 x 8 bytes |
| Number of I/O Pins | 31 |
| Connectivity | CANbus, SCI, SPI |
| Peripherals | DMA, POR, PWM, WDT |
| Package Type | 64-HLQFP (10x10 mm) with exposed pad |
| Tipe Mounting | Surface Mount |
| Suhu Kerja | -40C to +125C |
| Status RoHS | Compliant |
| Series | S12 MagniV |
Konfigurasi Pin S912ZVMC64F3MKH
| Pin produk 1 | VDDR — Voltage regulator supply for digital logic |
| Pin produk 2 | VDDX — High-voltage analog supply |
| Pin produk 3 | VSSX — Analog ground |
| Pin produk 4 | VSSA — Analog ground reference |
| Pin produk 5 | VDDA — Analog regulator output |
| Pin produk 6 | VDDR — Digital logic supply |
| Pin produk 7 | VSSR — Digital ground |
| Pin produk 8 | RESET — External reset input (active low) |
| Pin produk 9 | BKGD — Background debug mode pin |
| Pin produk 10 | TEST — Test mode pin |
| Pin produk 11 | GPIO31 — General purpose I/O 31 |
| Pin produk 12 | GPIO30 — General purpose I/O 30 |
| Pin produk 13 | GPIO29 — General purpose I/O 29 |
| Pin produk 14 | GPIO28 — General purpose I/O 28 |
| Pin produk 15 | GPIO27 — General purpose I/O 27 |
| Pin produk 16 | GPIO26 — General purpose I/O 26 |
| Pin produk 17 | GPIO25 — General purpose I/O 25 |
| Pin produk 18 | GPIO24 — General purpose I/O 24 |
| Pin produk 19 | GPIO23 — General purpose I/O 23 |
| Pin produk 20 | GPIO22 — General purpose I/O 22 |
| Pin produk 21 | GPIO21 — General purpose I/O 21 |
| Pin produk 22 | GPIO20 — General purpose I/O 20 |
| Pin produk 23 | GPIO19 — General purpose I/O 19 |
| Pin produk 24 | GPIO18 — General purpose I/O 18 |
| Pin produk 25 | GPIO17 — General purpose I/O 17 |
| Pin produk 26 | GPIO16 — General purpose I/O 16 |
| Pin produk 27 | GPIO15 — General purpose I/O 15 |
| Pin produk 28 | GPIO14 — General purpose I/O 14 |
| Pin produk 29 | GPIO13 — General purpose I/O 13 |
| Pin produk 30 | GPIO12 — General purpose I/O 12 |
| Pin produk 31 | GPIO11 — General purpose I/O 11 |
| Pin produk 32 | GPIO10 — General purpose I/O 10 |
| Pin produk 33 | GPIO9 — General purpose I/O 9 |
| Pin produk 34 | GPIO8 — General purpose I/O 8 |
| Pin produk 35 | GPIO7 — General purpose I/O 7 |
| Pin produk 36 | GPIO6 — General purpose I/O 6 |
| Pin produk 37 | GPIO5 — General purpose I/O 5 |
| Pin produk 38 | GPIO4 — General purpose I/O 4 |
| Pin produk 39 | GPIO3 — General purpose I/O 3 |
| Pin produk 40 | GPIO2 — General purpose I/O 2 |
| Pin produk 41 | GPIO1 — General purpose I/O 1 |
| Pin produk 42 | GPIO0 — General purpose I/O 0 |
| Pin produk 43 | CANH — CAN bus high line |
| Pin produk 44 | CANL — CAN bus low line |
| Pin produk 45 | SPLIT — CAN bus split termination reference |
| Pin produk 46 | TXCAN — CAN transmit output (internal) |
| Pin produk 47 | RXCAN — CAN receive input (internal) |
| Pin produk 48 | PSSI_CLK — Peripheral SSI clock |
| Pin produk 49 | PSSI_DATA — Peripheral SSI data |
| Pin produk 50 | SCIRX — SCI receive input |
| Pin produk 51 | SCITX — SCI transmit output |
| Pin produk 52 | SPIMOSI — SPI master-out slave-in |
| Pin produk 53 | SPIMISO — SPI master-in slave-out |
| Pin produk 54 | SPISCK — SPI clock |
| Pin produk 55 | SPI_CS — SPI chip select |
| Pin produk 56 | PWM0 — PWM channel 0 output |
| Pin produk 57 | PWM1 — PWM channel 1 output |
| Pin produk 58 | TCLK — Timer clock input |
| Pin produk 59 | AN0 — ADC analog input 0 |
| Pin produk 60 | AN1 — ADC analog input 1 |
| Pin produk 61 | AN2 — ADC analog input 2 |
| Pin produk 62 | AN3 — ADC analog input 3 |
| Pin produk 63 | TDO — JTAG test data out |
| Pin produk 64 | EPAD — Exposed thermal pad - tie to ground |
Aplikasi Umum
S912ZVMC64F3MKH cocok untuk 6 aplikasis: Automotive HVAC Control Module, Body Control Module (BCM), Door Module and Seat Controller, Automotive Lighting ECU, Industrial CAN-Node Sensor Hub, Small DC Motor and Pump Controller.
Automotive HVAC Control Module
The S912ZVMC64F3MKH is well suited for HVAC control modules that drive blowers, mode doors, and temperature blend actuators. Its integrated CANbus interface connects to the vehicle's body controller network, while the on-chip SCI and SPI controllers interface with sensor ICs and stepper motor drivers. The S12Z core at 50MHz handles PID control loops and fault diagnostics in real time, and the 64KB Flash accommodates lookup tables for climate calibration curves. The -40C to +125C range supports under-dash mounting, and the 64-LQFP exposed pad provides the thermal headroom required for sustained PWM activity.
Direkomendasikan
Body Control Module (BCM)
For body controllers consolidating lighting, wipers, mirrors, and accessory switching, the S912ZVMC64F3MKH delivers the required CANbus backbone, GPIO count, and AEC-Q100 Grade 1 thermal resilience. The 31 GPIO pins can drive MOSFET high-sides and low-sides through external predrivers, while the integrated 5V regulator simplifies power tree design. The 64KB Flash supports body controller firmware including LIN sub-bus master logic and PWM-controlled LED dimming. The exposed pad on the LQFP-64 keeps junction temperatures in check during sustained CAN traffic.
Direkomendasikan
Door Module and Seat Controller
Door modules controlling window lift, mirror adjustment, and locking benefit from the S912ZVMC64F3MKH's small 64-LQFP footprint and CANbus connectivity. The 4KB RAM and DMA controller handle simultaneous PWM-controlled mirror motor actuation and CAN message buffering without CPU stalls. AEC-Q100 Grade 1 readiness ensures the part survives door-cavity thermal cycling, and the integrated SCI interface supports LIN-communicated mirror position sensors. This combination shrinks the door-module BOM by replacing a discrete MCU plus external CAN transceiver with a single MagniV IC.
Direkomendasikan
Automotive Lighting ECU
Headlight level adjustment, DRL, and ambient lighting controllers leverage the S912ZVMC64F3MKH's PWM channels and CAN interface for command reception from the BCM. The S12Z core runs flicker-free PWM dimming algorithms at 50MHz while the 4KB RAM holds color-mixing tables for RGB ambient lighting. The 64-LQFP package supports compact PCB integration inside lamp housings, and the 64KB Flash stores adaptive headlight calibration profiles per market.
Direkomendasikan
Industrial CAN-Node Sensor Hub
Beyond automotive, the S912ZVMC64F3MKH serves as a CANopen or DeviceNet slave node for industrial sensor aggregation. The integrated CANbus controller and 5V regulator allow direct connection to industrial 24V busses with a simple external buck. The S12Z core processes local sensor data and publishes aggregated messages over CAN, reducing bus traffic. The 64-LQFP footprint eases migration from industrial-grade designs to AEC-Q100 automotive deployments on the same silicon, simplifying dual-market product families.
Direkomendasikan
Small DC Motor and Pump Controller
Brushed DC motor and small pump controllers use the S912ZVMC64F3MKH's PWM channels for soft-start ramps and current limiting. The integrated CANbus interface lets the module join vehicle or industrial networks for closed-loop speed control, while the SCI serves as a debug and calibration port. The 64KB Flash supports field-upgradeable firmware for evolving pump curves, and the 64-LQFP exposed pad handles sustained switching losses from the motor FET bridge.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk S912ZVMC64F3MKH — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | S912ZVML64F3MKH | S912ZVML64F3WKH | S912ZVMC64F3MKK |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 64-HLQFP (10x10 mm) - same | 64-HLQFP (10x10 mm) - same | 64-HLQFP (10x10 mm) - same | 64-HLQFP (10x10 mm) - same |
| Core | S12Z 16-bit | S12Z 16-bit | S12Z 16-bit | S12Z 16-bit |
| Maximum Clock Speed | 50 MHz | 50 MHz | 50 MHz | 50 MHz |
| Flash Memory | 64 KB | 64 KB | 64 KB | 64 KB |
| RAM | 4 KB | 4 KB | 4 KB | 4 KB |
| Operating Temperature | -40C to +125C | -40C to +125C | -40C to +150C | -40C to +125C |
| AEC-Q100 Grade | Grade 1 | Grade 1 (explicit) | Grade 0 | Grade 1 |
Diferensiator Kunci
- Single-die CAN PHY + MCU integration (vsS912XHZ256F1VAG (discrete MCU + external CAN transceiver design))
- Automotive-qualified sibling variant available (vsS912ZVML64F3MKH (AEC-Q100 explicit))
- On-chip 5V regulator (vsS912ZVL12F0MLFR)
Catatan Desain
The S912ZVMC64F3MKH integrates a 5V regulator powered from the high-voltage VDDX/VSSX analog supply pins. Decouple VDDX with at least a 1uF X7R ceramic close to the pin, plus a 10uF bulk capacitor, to absorb CAN bus load-dump transients. Per NXP application guidance, VDDX must be tied directly to the 12V battery node through a reverse-battery protection diode; do not exceed 40V on VDDX. The internal VDDR logic supply should be bypassed with a 100nF and 4.7uF pair placed within 5mm of the VDDR/VSSR pins to keep the S12Z core free of switching noise.
Estimated: at full 50MHz CPU activity and CAN traffic, the S912ZVMC64F3MKH typically dissipates approximately 200-300 mW in the 64-HLQFP package. The exposed pad on pin 64 must be soldered to a continuous PCB ground copper pour of at least 25 mm^2 to keep junction temperature rise under 15C above ambient. For under-hood modules where ambient may reach 105C, ensure the PCB copper area pushes theta_JA below 35 C/W; otherwise the part will derate or trigger the integrated thermal shutdown.
Route the CANH and CANL traces as a differential pair with 100 ohm impedance and a maximum length of 30 cm for automotive in-cabin networks. Per NXP layout guidance, place the CAN bus split-capacitor termination (between SPLIT and ground) within 10mm of the SPLIT pin to balance common-mode voltage. Keep high-current motor drive traces away from the analog reference pins to avoid ADC measurement corruption during PWM switching events.
Do not operate the S912ZVMC64F3MKH without a stable BKGD pull-up during reset - the background debug pin is used by the BDM tool to enter debug mode and an unstable voltage will trigger spurious resets. Ensure the EEPROM emulation scheme is compatible with the 512-byte on-chip EEPROM partition; attempting EEPROM emulation in Flash without proper wear-leveling will wear the Flash prematurely. Finally, do not toggle GPIO during MCU reset, as the internal pull-up/down configuration defaults can source unexpected current through external pull resistors.
Informasi Konformitas
RoHS and REACH compliant per NXP product page. AEC-Q100 Grade 1 qualified for automotive applications; for Grade 0 choose S912ZVML64F3WKH.
